Af:table gets cleared when adding new record in it

Dear All,
I am having a af:table on my page, which has an dropdown. When the value of dd is changed then a record(blank) should be inserted in the same af:table.
Now i have following problem.
When i set row Selection to single, then every thing works fine,
When i set it to none then when i add a row to table(on change of dropdown) then table gets cleared, means only newely added values gets cleared and not the one which are fetched from database.
The reason behind setting row selection to none is that on single selection when ever the user tries to change the value of from other row then it hits server, sometimes it becomes slow also.So for the workaround i need to set autoSubmit="true" to all fields in table but then also whenever user changes the value it hits server.
Please guys can any one give me proper solution...except rowSelection
Thanks,
Santosh
jdeveloper 11.1.1.5.0

Hi Frank,
Thanks for the reply. I can get the correct input component to display on a given row in the table.
The real issue is when a new row is added (via a createInsert operation on a button). The creation of a new row PPRs the table and the input Components are all set the same on any existing rows, irrespective of which component was used to input data.
I'm assuming here that it should be possible to have one row show one component under the column, while another row shows a different input component under the same column..?
Do I need to iterate through the af:table (if possible) when a new row is created to reset the correct input component??
Thanks.

Similar Messages

Master detail refresh when adding new record

Guys,
Can't believe I need to ask this question ....but here we go
when adding new master record --> I want to refresh the detail record..... in my case old detail records stays as it is until i click the save button
for detail panelformlayout-->partial trigger--> i set the ids of master panelformlayout and newMasterrecord button..... but still it doesn't refresh the child record when new master record is being created.....
any thought will be greatly appreciated

In application module it works fine......
Even on the page when i click next/previous button on masters it refreshes details information.
but when i click the button "create" it doesn't refreshes details...... (but when i save the information, i certainly see the updated details)
seems like there is some settings or binding i need to check but can't able to find one.....
any help is greatly appreciated

Null Pointer Exception When Adding New Row on Table

Hello JheadStart Team
I have used detail group with table layout , when I am clicking on AddRow button on detail table , I encounter NulllPointer Exception . I have traced the code and fount that in JhsCollectionModel when adding new row following
condition occurs :
DCIteratorBinding ib = getRangeBinding().getIteratorBinding();
int rangeSize = ib.getRangeSize();
int rowsInRange = ib.getAllRowsInRange().length;
because getAllRowsInRange is Null then the error raise.
My JheadStart ver is 10.1.3.3.85 .
Detail Group with table layout setting is :
Use Table range=true
Show New Row at top=true
New Rows:empty
Show Add New Row Button :true
Regards

Given the build you are using, I assume you are an Oracle employee.
Is this correct? if so, please post your question to the [email protected] mailing list.
Steven Davelaar,
JHeadstart team.

TableSorter errors when adding new data

so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
     at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
     at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
     at javax.swing.JTable.getValueAt(Unknown Source)
     at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
    public Object getValueAt(int row, int column)
        return tableModel.getValueAt(modelIndex(row), column);
    }code problem II:
    public int modelIndex(int viewIndex)
             return getViewToModel()[viewIndex].modelIndex;
    }TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* <p/>
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* <p/>
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* <p/>
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
    protected TableModel tableModel;
    public static final int DESCENDING = -1;
    public static final int NOT_SORTED = 0;
    public static final int ASCENDING = 1;
    private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
    public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
        public int compare(Object o1, Object o2)
            return ((Comparable) o1).compareTo(o2);
    public static final Comparator LEXICAL_COMPARATOR = new Comparator()
        public int compare(Object o1, Object o2)
            return o1.toString().compareTo(o2.toString());
    private Row[] viewToModel;
    private int[] modelToView;
    private JTableHeader tableHeader;
    private MouseListener mouseListener;
    private TableModelListener tableModelListener;
    private Map columnComparators = new HashMap();
    private List sortingColumns = new ArrayList();
    public TableSorter()
        this.mouseListener = new MouseHandler();
        this.tableModelListener = new TableModelHandler();
    public TableSorter(TableModel tableModel)
        this();
        setTableModel(tableModel);
    public TableSorter(TableModel tableModel, JTableHeader tableHeader)
        this();
        setTableHeader(tableHeader);
        setTableModel(tableModel);
    private void clearSortingState()
        viewToModel = null;
        modelToView = null;
    public TableModel getTableModel()
        return tableModel;
    public void setTableModel(TableModel tableModel)
        if (this.tableModel != null)
            this.tableModel.removeTableModelListener(tableModelListener);
        this.tableModel = tableModel;
        if (this.tableModel != null)
            this.tableModel.addTableModelListener(tableModelListener);
        clearSortingState();
        fireTableStructureChanged();
    public JTableHeader getTableHeader()
        return tableHeader;
    public void setTableHeader(JTableHeader tableHeader)
        if (this.tableHeader != null)
            this.tableHeader.removeMouseListener(mouseListener);
            TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
            if (defaultRenderer instanceof SortableHeaderRenderer)
                this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
        this.tableHeader = tableHeader;
        if (this.tableHeader != null)
            this.tableHeader.addMouseListener(mouseListener);
            this.tableHeader.setDefaultRenderer
                    new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
    public boolean isSorting()
        return sortingColumns.size() != 0;
    private Directive getDirective(int column)
        for (int i = 0; i < sortingColumns.size(); i++)
            Directive directive = (Directive)sortingColumns.get(i);
            if (directive.column == column)
                return directive;
        return EMPTY_DIRECTIVE;
    public int getSortingStatus(int column)
        return getDirective(column).direction;
    private void sortingStatusChanged()
        clearSortingState();
        fireTableDataChanged();
        if (tableHeader != null)
            tableHeader.repaint();
    public void setSortingStatus(int column, int status)
        Directive directive = getDirective(column);
        if (directive != EMPTY_DIRECTIVE)
            sortingColumns.remove(directive);
        if (status != NOT_SORTED)
            sortingColumns.add(new Directive(column, status));
        sortingStatusChanged();
    protected Icon getHeaderRendererIcon(int column, int size)
        Directive directive = getDirective(column);
        if (directive == EMPTY_DIRECTIVE)
            return null;
        return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
    private void cancelSorting()
        sortingColumns.clear();
        sortingStatusChanged();
    public void setColumnComparator(Class type, Comparator comparator)
        if (comparator == null)
            columnComparators.remove(type);
        else
            columnComparators.put(type, comparator);
    protected Comparator getComparator(int column)
        Class columnType = tableModel.getColumnClass(column);
        Comparator comparator = (Comparator) columnComparators.get(columnType);
        if (comparator != null)
            return comparator;
        if (Comparable.class.isAssignableFrom(columnType))
            return COMPARABLE_COMAPRATOR;
        return LEXICAL_COMPARATOR;
    private Row[] getViewToModel()
        if (viewToModel == null)
            int tableModelRowCount = tableModel.getRowCount();
            viewToModel = new Row[tableModelRowCount];
            for (int row = 0; row < tableModelRowCount; row++)
                viewToModel[row] = new Row(row);
            if (isSorting())
                Arrays.sort(viewToModel);
        return viewToModel;
    public int modelIndex(int viewIndex)
             return getViewToModel()[viewIndex].modelIndex;
    private int[] getModelToView()
        if (modelToView == null)
            int n = getViewToModel().length;
            modelToView = new int[n];
            for (int i = 0; i < n; i++)
                modelToView[modelIndex(i)] = i;
        return modelToView;
    // TableModel interface methods
    public int getRowCount()
        return (tableModel == null) ? 0 : tableModel.getRowCount();
    public int getColumnCount()
        return (tableModel == null) ? 0 : tableModel.getColumnCount();
    public String getColumnName(int column)
        return tableModel.getColumnName(column);
    public Class getColumnClass(int column)
        return tableModel.getColumnClass(column);
    public boolean isCellEditable(int row, int column)
        return tableModel.isCellEditable(modelIndex(row), column);
    public Object getValueAt(int row, int column)
        return tableModel.getValueAt(modelIndex(row), column);
    public void setValueAt(Object aValue, int row, int column)
        tableModel.setValueAt(aValue, modelIndex(row), column);
    // Helper classes
    private class Row implements Comparable
        private int modelIndex;
        public Row(int index)
            this.modelIndex = index;
        public int compareTo(Object o)
            int row1 = modelIndex;
            int row2 = ((Row) o).modelIndex;
            for (Iterator it = sortingColumns.iterator(); it.hasNext();)
                Directive directive = (Directive) it.next();
                int column = directive.column;
                Object o1 = tableModel.getValueAt(row1, column);
                Object o2 = tableModel.getValueAt(row2, column);
                int comparison = 0;
                // Define null less than everything, except null.
                if (o1 == null && o2 == null)
                    comparison = 0;
                } else if (o1 == null)
                    comparison = -1;
                } else if (o2 == null)
                    comparison = 1;
                } else {
                    comparison = getComparator(column).compare(o1, o2);
                if (comparison != 0)
                    return directive.direction == DESCENDING ? -comparison : comparison;
            return 0;
    private class TableModelHandler implements TableModelListener
        public void tableChanged(TableModelEvent e)
            // If we're not sorting by anything, just pass the event along.
            if (!isSorting())
                clearSortingState();
                fireTableChanged(e);
                return;
            // If the table structure has changed, cancel the sorting; the
            // sorting columns may have been either moved or deleted from
            // the model.
            if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
                cancelSorting();
                fireTableChanged(e);
                return;
            // We can map a cell event through to the view without widening
            // when the following conditions apply:
            // a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
            // b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
            // c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
            // d) a reverse lookup will not trigger a sort (modelToView != null)
            // Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
            // The last check, for (modelToView != null) is to see if modelToView
            // is already allocated. If we don't do this check; sorting can become
            // a performance bottleneck for applications where cells
            // change rapidly in different parts of the table. If cells
            // change alternately in the sorting column and then outside of
            // it this class can end up re-sorting on alternate cell updates -
            // which can be a performance problem for large tables. The last
            // clause avoids this problem.
            int column = e.getColumn();
            if (e.getFirstRow() == e.getLastRow()
                    && column != TableModelEvent.ALL_COLUMNS
                    && getSortingStatus(column) == NOT_SORTED
                    && modelToView != null)
                int viewIndex = getModelToView()[e.getFirstRow()];
                fireTableChanged(new TableModelEvent(TableSorter.this,
                                                     viewIndex, viewIndex,
                                                     column, e.getType()));
                return;
            // Something has happened to the data that may have invalidated the row order.
            clearSortingState();
            fireTableDataChanged();
            return;
    private class MouseHandler extends MouseAdapter
        public void mouseClicked(MouseEvent e)
            JTableHeader h = (JTableHeader) e.getSource();
            TableColumnModel columnModel = h.getColumnModel();
            int viewColumn = columnModel.getColumnIndexAtX(e.getX());
            int column = columnModel.getColumn(viewColumn).getModelIndex();
            if (column != -1)
                int status = getSortingStatus(column);
                if (!e.isControlDown())
                    cancelSorting();
                // Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
                // {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
                status = status + (e.isShiftDown() ? -1 : 1);
                status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
                setSortingStatus(column, status);
    private static class Arrow implements Icon
        private boolean descending;
        private int size;
        private int priority;
        public Arrow(boolean descending, int size, int priority)
            this.descending = descending;
            this.size = size;
            this.priority = priority;
        public void paintIcon(Component c, Graphics g, int x, int y)
            Color color = c == null ? Color.GRAY : c.getBackground();
            // In a compound sort, make each succesive triangle 20%
            // smaller than the previous one.
            int dx = (int)(size/2*Math.pow(0.8, priority));
            int dy = descending ? dx : -dx;
            // Align icon (roughly) with font baseline.
            y = y + 5*size/6 + (descending ? -dy : 0);
            int shift = descending ? 1 : -1;
            g.translate(x, y);
            // Right diagonal.
            g.setColor(color.darker());
            g.drawLine(dx / 2, dy, 0, 0);
            g.drawLine(dx / 2, dy + shift, 0, shift);
            // Left diagonal.
            g.setColor(color.brighter());
            g.drawLine(dx / 2, dy, dx, 0);
            g.drawLine(dx / 2, dy + shift, dx, shift);
            // Horizontal line.
            if (descending) {
                g.setColor(color.darker().darker());
            } else {
                g.setColor(color.brighter().brighter());
            g.drawLine(dx, 0, 0, 0);
            g.setColor(color);
            g.translate(-x, -y);
        public int getIconWidth()
            return size;
        public int getIconHeight()
            return size;
    private class SortableHeaderRenderer implements TableCellRenderer
        private TableCellRenderer tableCellRenderer;
        public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
            this.tableCellRenderer = tableCellRenderer;
        public Component getTableCellRendererComponent(JTable table,
                                                       Object value,
                                                       boolean isSelected,
                                                       boolean hasFocus,
                                                       int row,
                                                       int column)
            Component c = tableCellRenderer.getTableCellRendererComponent(table,
                    value, isSelected, hasFocus, row, column);
            if (c instanceof JLabel) {
                JLabel l = (JLabel) c;
                l.setHorizontalTextPosition(JLabel.LEFT);
                int modelColumn = table.convertColumnIndexToModel(column);
                l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
            return c;
    private static class Directive
        private int column;
        private int direction;
        public Directive(int column, int direction)
            this.column = column;
            this.direction = direction;
}any input will be appreciated.
thanks
Peter

The code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).

Can iOS Numbers copy formulas when adding new rows?

iOS Numbers table add row is not copying previous cell formulas. Is this supported or not?
I have a table with lots of columns and all of them have formulas. When I click at the lower left of the table to add a row, none of the new cells have the formulas. I have to manually go through every column and copy the formulas to the new row.
This is not very practical if you're planning to use Numbers on the go with an iPad. In my case, I have to quickly get a new row ready as needed. I was hoping there is a preference setting somewhere like "copy formulas when adding new row".

I had the same issue with the added twist that I wanted to reference the created cells in formulas in other sheets. This is what works for me:
I use a form to enter data. The referenced sheet is set up like this:
1     Name     Date     ServPayment    SalesPayment     Total
2     Week1                                                                 =sum (ServPayment,SalesPayment)
3                                                                                =sum (ServPayment,SalesPayment)
4     TotWeek1                                                            =sum (Total2,Total3)
"Total" sums the 2 Payments, TotWeek1 sums the totals.
In the entry form I never add data to the empty line. In this example, I would start at "Week1" and tap the "+" to add a new form. This creates the line in the referenced sheet with my formulas. As I continue, I always start at the last entry I have made and tap "+".
When I create a line that does not have the formula on either side, I do not get the formula.
Hope this helps.

Full server pool crashes when adding new iSCSI server

Hi,
we have a Pool Group with 2 machines (1 Server Pool Master + Server Virtual Machine + Utility Server and another 1 Server Virtual Machine). Both have a iSCSI Shared Disk which builds /OVS partition.
This is working, we can use High Availability, Migrate guests etc.
But when adding new Server Virtual Machines to the pool (with guests running), current machines in the Pools get restarted.
My question is, can server virtual machines be "hot added" to the pool group while guests are running?
Thanks and regards,
Marc

Hi,
hosts file seems to be correct.
Messages logs during the crash time are the following:
Node vmserver15 = Server Pool Master, Utility Master and Server Virtual Machine
Dec 10 12:40:02 vmserver15 kernel: vlan500: port 3(vif6.0) entering disabled state
Dec 10 12:40:02 vmserver15 kernel: device vif6.0 left promiscuous mode
Dec 10 12:40:02 vmserver15 kernel: type=1700 audit(1260445202.434:16): dev=vif6.0 prom=0 old_prom=256 auid=4294967295 ses=4294967295
Dec 10 12:40:02 vmserver15 kernel: vlan500: port 3(vif6.0) entering disabled state
Dec 10 12:40:02 vmserver15 kernel: loop10: dropped 10114 extents
Dec 10 12:40:03 vmserver15 udhcpc: udhcp client (v0.9.8) started
Dec 10 12:40:03 vmserver15 udhcpc: Lease of 193.109.175.25 obtained, lease time 172800
Dec 10 12:40:04 vmserver15 kernel: device vif7.0 entered promiscuous mode
Dec 10 12:40:04 vmserver15 kernel: type=1700 audit(1260445204.774:17): dev=vif7.0 prom=256 old_prom=0 auid=4294967295 ses=4294967295
Dec 10 12:40:04 vmserver15 kernel: vlan500: topology change detected, propagating
Dec 10 12:40:04 vmserver15 kernel: vlan500: port 3(vif7.0) entering forwarding state
Dec 10 12:40:05 vmserver15 kernel: loop10: fast redirect
Dec 10 12:40:06 vmserver15 kernel: blkback: ring-ref 770, event-channel 9, protocol 1 (x86_32-abi)
Dec 10 12:53:35 vmserver15 kernel: o2net: no longer connected to node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:36 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:37 vmserver15 kernel: o2net: accepted connection from node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:38 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:50 vmserver15 last message repeated 6 times
Dec 10 12:53:51 vmserver15 kernel: o2net: no longer connected to node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:52 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:53 vmserver15 kernel: o2net: accepted connection from node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_atime:2193 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):__ocfs2_file_aio_read:2434 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_write_begin:1845 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_file_buffered_write:2016 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):__ocfs2_file_aio_write:2173 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000000020744c1370e: bad lockid+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_suballoc_bits:449 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_cluster_bitmap_bits:682 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_local_alloc_reserve_for_window:930 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_local_alloc_slide_window:1063 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_local_alloc_bits:537 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):__ocfs2_reserve_clusters:725 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_lock_allocators:677 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_write_begin_nolock:1751 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_write_begin:1861 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_file_buffered_write:2016 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):__ocfs2_file_aio_write:2173 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: loop: Write error at byte offset 37644512256, length 4096.+
. <the above bold and cursive text is repetead few times>
Dec 10 12:58:29 vmserver15 kernel: (5638,3):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_inode_lock_full:2064 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_write_begin:1845 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_file_buffered_write:2016 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):__ocfs2_file_aio_write:2173 ERROR: status = -22
Dec 10 13:01:16 vmserver15 syslogd 1.4.1: restart.
Node vmserver10: Virtual Server Machine
Dec 10 12:53:35 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:35 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 0
Dec 10 12:53:35 vmserver10 kernel: (20996,0):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:M000000000000000000022044c1370e: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_get_lock_resource:878 E3FE9E5767CA457FA697980EB637E93B: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_do_recovery:524 (5344) Node 1 is the Recovery Master for the Dead Node 0 for Domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 12:53:36 vmserver10 kernel: (20996,0):ocfs2_replay_journal:1183 Recovering node 0 from slot 0 on device (8,17)
Dec 10 12:53:37 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_get_lock_resource:844 ovm:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_get_lock_resource:878 ovm: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_do_recovery:524 (8672) Node 1 is the Recovery Master for the Dead Node 0 for Domain ovm
Dec 10 12:53:40 vmserver10 kernel: kjournald starting. Commit interval 5 seconds
Dec 10 12:53:51 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:53 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:53 vmserver10 kernel: (3761,0):dlm_convert_lock_handler:489 ERROR: did not find lock to convert on grant queue! cookie=0:92+
Dec 10 12:53:53 vmserver10 kernel: lockres: M000000000000000001050c0000000, owner=1, state=0+
Dec 10 12:53:53 vmserver10 kernel:   last used: 0, refcnt: 3, on purge list: no+
Dec 10 12:53:53 vmserver10 kernel:   on dirty list: no, on reco list: no, migrating pending: no+
Dec 10 12:53:53 vmserver10 kernel:   inflight locks: 0, asts reserved: 0+
*Dec 10 12:53:53 vmserver10 kernel:   refmap nodes: [ ], inflight=0*+
Dec 10 12:53:53 vmserver10 kernel:   granted queue:+
Dec 10 12:53:53 vmserver10 kernel:     type=5, conv=-1, node=1, cookie=1:243, ref=2, ast=(empty=y,pend=n), bast=(empty=y,pend=n), pending=(conv=n,lock=n,cancel=n,unlock=n)+
Dec 10 12:53:53 vmserver10 kernel:   converting queue:+
Dec 10 12:53:53 vmserver10 kernel:   blocked queue:+
. <the above bold and cursive text is repetead few times>
Dec 10 12:57:18 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 12:57:18 vmserver10 kernel: (3761,0):dlm_convert_lock_handler:489 ERROR: did not find lock to convert on grant queue! cookie=0:92+
Dec 10 12:57:18 vmserver10 kernel: lockres: M000000000000000001050c0000000, owner=1, state=0+
Dec 10 12:57:18 vmserver10 kernel:   last used: 0, refcnt: 3, on purge list: no+
Dec 10 12:57:18 vmserver10 kernel:   on dirty list: no, on reco list: no, migrating pending: no+
Dec 10 12:57:18 vmserver10 kernel:   inflight locks: 0, asts reserved: 0+
*Dec 10 12:57:18 vmserver10 kernel:   refmap nodes: [ ], inflight=0*+
Dec 10 12:57:18 vmserver10 kernel:   granted queue:+
Dec 10 12:57:18 vmserver10 kernel:     type=5, conv=-1, node=1, cookie=1:243, ref=2, ast=(empty=y,pend=n), bast=(empty=y,pend=n), pending=(conv=n,lock=n,cancel=n,unlock=n)+
Dec 10 12:57:18 vmserver10 kernel:   converting queue:+
Dec 10 12:57:18 vmserver10 kernel:   blocked queue:+
. <the above bold and cursive text is repetead few times>
Dec 10 12:58:32 vmserver10 kernel: (3761,0):dlm_unlock_lock_handler:511 ERROR: failed to find lock to unlock! cookie=0:1849
Dec 10 12:58:33 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 12:59:02 vmserver10 kernel: o2net: connection to node vmserver15.pic.es (num 0) at 193.109.174.115:7777 has been idle for 30.0 seconds, shutting it down.
Dec 10 12:59:02 vmserver10 kernel: (0,0):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1260446312.830107 now 1260446342.828243 dr 1260446312.830066 adv 1260446312.830319:1260446312.830320 func (b9f5fd13:506) 1260446312.830109:1260446312.830303)
Dec 10 12:59:02 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:59:32 vmserver10 kernel: (3761,0):o2net_connect_expired:1664 ERROR: no connection established with node 0 after 30.0 seconds, giving up and returning errors.
Dec 10 13:01:42 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:01:45 vmserver10 kernel: ocfs2_dlm: Node 0 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:01:45 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1
Dec 10 13:01:51 vmserver10 kernel: o2net: accepted connection from node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:01:56 vmserver10 kernel: ocfs2_dlm: Node 2 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:01:56 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1 2
Dec 10 13:09:05 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 13:16:45 vmserver10 kernel: o2net: connection to node vmserver16.pic.es (num 2) at 193.109.174.116:7777 has been idle for 30.0 seconds, shutting it down.
Dec 10 13:16:45 vmserver10 kernel: (0,0):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1260447375.655426 now 1260447405.655712 dr 1260447375.655413 adv 1260447375.655427:1260447375.655427 func (b9f5fd13:503) 1260446516.75600:1260446516.75608)
Dec 10 13:16:45 vmserver10 kernel: o2net: no longer connected to node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:17:15 vmserver10 kernel: (3761,0):o2net_connect_expired:1664 ERROR: no connection established with node 2 after 30.0 seconds, giving up and returning errors.
Dec 10 13:17:19 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 2
Dec 10 13:17:20 vmserver10 kernel: (3761,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 2
Dec 10 13:29:05 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:29:05 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 0
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_get_lock_resource:878 E3FE9E5767CA457FA697980EB637E93B: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_do_recovery:524 (5344) Node 1 is the Recovery Master for the Dead Node 0 for Domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:29:06 vmserver10 kernel: (28412,0):ocfs2_replay_journal:1183 Recovering node 0 from slot 0 on device (8,17)
Dec 10 13:29:09 vmserver10 kernel: kjournald starting. Commit interval 5 seconds
Dec 10 13:29:16 vmserver10 kernel: o2net: accepted connection from node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:29:20 vmserver10 kernel: ocfs2_dlm: Node 2 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:29:20 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 1 2
Dec 10 13:32:08 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:32:11 vmserver10 kernel: ocfs2_dlm: Node 0 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:32:11 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1 2
Dec 10 13:36:10 vmserver10 shutdown[28681]: shutting down for system reboot+
I will investigate what seems to be going on and post it here.
Thanks for your help.
Edited by: Marc Caubet on 11-Dec-2009 02:05
Edited by: Marc Caubet on 11-Dec-2009 02:07

Slideshow image resizing when adding new images

I am creating a series of slideshows on multiple pages. I created one slide show using the "basic" slideshow and resized it to the dimensions and settings I wanted. I have many pictures all of different proportion, therefore, I selected the "fill frame proportionally" so they would all fit the dimension I set. I wanted to use this first slideshow as a template for all of the rest. I added images to this first slideshow with no problems. All of my different sized images scaled or cropped to fit within the dimension I set. The problem comes in when I do two things: 1) When I add other images of different dimensions to this same slideshow gallery, they come smaller that the intended dimensions I set previous. I check the setting and it is still on "fill frame proportionally" similar to the first batch of pictures. 2) The second issue is when copy this slideshow as a template to other pages. When I try to replace or add to the slideshow gallery, the images come in cropped or smaller rather than filling the frame. Again, the settings are still the same from my very first slideshow that worked just as i intended.
I could resize all the images to all the same dimensions using another program like photoshop, but that is another step that is very tedious and it would seem that it should be something built into Muse.
Is there a way around this?. Am I doing something wrong? Or is this just one of those glitches that happens with Muse? I appreciate any help that I can get.
Thanks!

Hi, I got it to work like this:
Using background colours in Photoshop so that all sizes are the same in pixels. Then manually adjusting thumbnails by double-clicking on them so that a red square appears.
Cheers,
Elsemiek
Op 26 dec. 2014, om 00:50 heeft MediaGraphics <[email protected]> het volgende geschreven:
slideshow image resizing when adding new images
created by MediaGraphics <https://forums.adobe.com/people/MediaGraphics> in Adobe Muse Bugs - View the full discussion <https://forums.adobe.com/message/7043933#7043933>
Hi there Elsemiekagain,
I had to fiddle around with my slide show to get it to work. That is, it worked at first, then went funky, and I had to fiddle. So much fiddling that I can't possibly know what actually made it start to work again.
And to some degree, this is the way that I find Muse to be in general. That it requires finessing to get it to work as expected. This adds a good deal of time to every development project, though I am getting better at this with practice and experience.
Most of it is not even things that could be easily put in words as instructions, as many are nanced. But in fairness, this version of Muse is a complete code re-write this year. So we do need to cut Adobe some slack, and give the team time to iron things out.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043933#7043933 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043933#7043933
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Muse Bugs by email <mailto:[email protected]ftware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 59>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Tables get affected when creating idoc

hi,
Tell me the tables get affected when creating idoc, for example in which
table idoc error logs get stored etc

Hi,
EDIDS - stores the Status of the IDOcs..There you can find the message type, message number and message id
EDID4 - where the idoc data is stored
EDIDC - where the control record for the idoc is stored
Thanks
Naren

Why is it like if i don't sync the data in my pad to the itunes of my system ,the data in my ipad is getting cleared when i copy any thing to my ipad.This is not comfortable rite?why is this so.?or there is any other way?

Why is it like if i don't sync the data in my pad to the itunes of my system ,the data in my ipad is getting cleared when i copy any thing to my ipad.This is not comfortable rite?why is this so.?or there is any other way?

i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason.

Since the upgrade to IOS7, the default phone label when adding new contacts on my iPhone 5 is "Radio". Previously the default was "Mobile" how can this be changed back to "Mobile"?

Since the upgrade to IOS7, the default phone label when adding new contacts in my iPhone 5 is "Radio". Previously the default was "Mobile". It is a hassle as when my iPhone contacts are synched with Outlook via Exchange, the phone number I've entered on the iPhone doesn't show on the default Outlook view as it is a "Radio" number rather than a "Mobile", "Work", "Home", etc number. It is still stored both on the iPhone & in Outlook & I can still use the number to phone or SMS, it is just incorrectly labelled & hence the source of frustration.
Apple please return the default to "Mobile" or alternatively find a way we can alter the default ourselves to "Mobile" or "Home" etc.

The following previous discussion may help: https://discussions.apple.com/message/23846793#23846793

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
To Operate iTunes from the External Drive...
Start iTunes with the Option key held down and guide it to the new location of the library.
Be Sure the drive is Formatted Mac OS Extended (journaled)
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

Sync problems - tracks dropping off when adding new o

Has anyone encountered a problem with Zen 8Gb players adding new tracks? I've noticed a couple of times when adding new tracks that some of the tracks that were already on the player have disappeared? Any ideas as to why this happens and how I can avoid it's
Cheers

Check the settings for the sync. Is it set to delete old ones to make room for new tracks?

Error adding new records in an user table

Hi
I'm trying to add a new record in an user table, and after calling the add method I get the next error message:
"Generating this document requieres numbering to be determined for the document".
I've defined my user table as Master Data, and the source code is as follows:
dim m_UserTable as SAPbobsCOM.UserTable
m_UserTable = SboCompany.UserTables.Item(UserTable)
m_usertable.Code = NewValue
m_usertable.UserFields.Fields.Item("U_FIELD1").Value = NewValue
if m_userTable.add() <> 0 then
SboCompany.GetLastError(lngError, strerror)
SboApplication.MessageBox(strerror)
end if
Thanks and Best Regards
Dani

Hi Dani,
when you create a user Table as "Master Data", this table becomes a part of a UDO (User Data Object) that you have to create too.
In the version 2004A, you don't have the possibility to enter information in these kind of table using the DI. You can only do it thru the application.
You can look at a post called "Access to UDO via DI" posted 16th December 2004
Sebastien

How to clear the previous filter text when creating new record??

Dear All,
my question is i i created table having filter and sorting.
when i m searching data through filter text data is coming but i want to clear that text(filter text) when i am creating new record.
for my case when i am creating new record all blank field is coming but in that filter text box previous data is coming which one i was searching.
but i need when i will create a new record tat filter text should be clear.
Thanks
Damby

Damby, please tell us your jdev version.
Check my blog http://tompeez.wordpress.com/2011/10/29/jdev-how-to-reset-a-filter-on-an-aftable/ you can add this to the button you use to create the new record.
Timo

Records randomly get duplicated when added or edited.

For some reason when a certain user is adding a record, it duplicates it three times. This also happens randomly when they edit the record.
Some get duplicated while some don't. There is no workflows or event handlers.
Why is that happening?

anyone?

Af:table gets cleared when adding new record in it

Similar Messages

Maybe you are looking for