After a call connects, my iphone 4 makes a jackhammer sound in my car only. does not happen in other cars. what is going on with my car to interfere with reception?
after a call connects, i can hear a loud jackhammer sound on my phone. the other end can hear it too. only happens in my car so i am thinking something in possibly my ignition is giving off a signal?? any suggestions?
What troubleshooting steps have you taken so far?
Restart?
Reset?
Reset All Settings?
Restore From Backup?
Restore As New?
Similar Messages
-
when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?
Howdy AndieKanaras,
It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
If you don't see your connected device in iTunes for Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling -
When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?
Hi SBEG2015,
I'm sorry to hear you are having these issues with your iPhone. Based on your description of what has happened and the symptoms you are seeing, you may need to have your iPhone evaluated and/or serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
Regards,
- Brenden -
After that i connected my iphone to a computer there was some errors and the phone stopped to work and there is just an apple on the screen on the phone and when I connect to i-tunes it is not any phone connected
Unable to Update or Restore
http://support.apple.com/kb/HT1808
iPhone, iPad, or iPod touch not appearing in iTunes
http://www.apple.com/support/itunes/troubleshooting/ -
After installing Mountain Lion on my MBP Retina, the WiFi connection drops frequently (not happening to other devices around, like on an iPhone); it also takes a lot to reconnect after wake up. Does anybody have a solution for this?
After installing Mountain Lion on my MBP Retina, the WiFi connection drops frequently (not happening to other devices around, like on an iPhone); it also takes a lot to reconnect after wake up. Does anybody have a solution for this?
-
How to connect my iphone 4s to a USB sound card for 5.1 speakers?
How to connect my iphone 4s to a USB sound card for 5.1 speakers?
You can't:
1. iPhone sound output is stereo, not Dolby 5.1 compatible.
2. iPhones do not connect sound output by standard USB. The connecting device has to be iPhone compatible. -
My wife received a new iPad Mini for Christmas-- when connected to iMac, icon appears in iPhoto sidebar; however, there appears to be no option to "unmount." Also, unlike my iPhone 4S whose icon appears in iTunes sidebar, the Mini does not. Any insights?
First open iTunes (version 11). Then connect the iPad. Now is it recognized?
If not .............
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
i tried all that but when i connect my iphone to my itunes there is no restore button. why is this happening?
Slightly important info to include.
Once the iPhone is in Recovery Mode, it must be restored with iTunes.
You are unable to select Restore? -
when someone calls me on Viber, WhatsApp and elsewhere do not appear on my iphone, and when you enjoy my photos on instagram also does not appear to do I do, take the technical assistance?
What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
when i connect my iPhone to the computer it gives me this message "ITunes could not sync contacts to the iPhone "my name" because the sync server failed to sync the iPhone. what is the problem?
What type of computer?
Mac: Sync Services: Advanced troubleshooting for contact and calendar syncing
Windows: Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
The following previous discussion may also help: Re: sync server failed to sync the iphone -
What's going on with safari on ipad and iphone not connecting?
What's going on with safari on ipad and iphone not connecting?
I am using safari on my iPad to respond here. What problems are you having? Do you have a good wifi connection? Try a reset, hold the power button and home button until you see the apple then let go.
-
i have a imac g3 dv se,500mhz, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes any suggestions?
Actually sounds like classic symptoms of a failing PAV (power-analog-video) on that model. Historically that's the weak spot in the G3 iMacs.
The lack of active cooling in the G3 iMac puts a lot of heat stress on this board and they eventually fail from overheating. Right now the board is still working as long as it's cool--it only fails when temps inside the computer rise.
About the only way to preserve the computer's life is to mount a 120mm fan directly on the case where the handle is--that's the exhaust port. The fan has to be positioned to PULL air out through that vent. It's an ugly solution to the eye but it has been done around here more than you would think.
Also make certain the bottom of the computer is not blocked. It the computer is sitting on a tablecloth or placemat, or there are loose papers on the desk under the case, it cannot get enough air into the bottom-mounted air intakes. Make/find some blocks to set the iMac a minimum of one inch (2.5CM) from the desk and move anything that can be "inhaled" from under the computer.
Even with such measures, the PAV board will eventually fail and be unrecoverable. It's a good time to start saving for a newer computer. -
I don't know why my Mac hardly connects to the Internet. The Internet bars are there but it does not browse, while my iPhone does.
If other Internet applications such as Mail and iTunes also don't work, run the Network Diagnostics assistant. How far do you get?
-
What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.
The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ? -
After watch a video in "full screen mode" and the video shrinks back into the eBook view, HALF of the TOP Title Bar DISAPPEARS, But it does not happen with ios 6.1
The Mac has never needed "Full Screen". It has done multiple screen Extended Desktop since 1987.
Full screen is an iPhone feature, carried into this verion with the mult-touch gestures and other so-called "unifying" features.
Maybe you are looking for
-
Decode Problem in Oracle 8.1.6
In our test database(Oracle 8.1.6), the SQL statement below does not give an "invalid number" error. select contact_id from news_contact Where 1 = decode(contact_id ,'pressoffice', 1,'k') and contact_id = 'pressoffice' However, when I ran this same S
-
Asset master update while doing GR.
currently we have one requirement that when we purchase a material then assign to an asset. then during GR in MIGO, we want the serial no ( manually entered) to be copied in that asset master - serial no. field... is there a way of solving this ?? Re
-
Oracle for a Data Warehouse & Data Mining Project
Hello, I am working for a marketing company and we have a pretty big OLTP database and my supervisor wants to make use of these data for decision making. The plan is to create a data mart(if not a warehouse) and use data mining tools on top of it. He
-
Version management in smartforms
Hi all I am not finding the version management in Smartform. Please advice where to find it. Thanks Ravindra Suvarna
-
PSE 9 Mac-I switched to a smaller monitor and can't determine how to shrink the window.
I recently changed monitors from a 28" Cinema display to a 23" Cinema display (Mac) and discovered that the window is still being displayed for the larger monitor which means that the pallettes that are displayed on the right cannot be seen. How do I