After entering "Country or Region" United States, I do not get a next button to advance through the process. What might be the cause?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Similar Messages

My macbook pro shut off for a few days now after a few days that i tried turning it on it finally turned on its been doing this often what might be the problem?

So my macbook pro turns off and i try to turn it on but it wont turn on then after a few days it turns back on. its been doing this alot sometimes it turns on after a few days sometimes it turns on after a few hours but i dont know what might be wrong

Hi oscarqwolf,
I'm sorry to hear you are having these issues with your MacBook Pro. If you are having intermittent but persistent power or startup issues with your Mac, you may find the troubleshooting steps outlined in the following article helpful:
If your Mac won't turn on - Apple Support
Regards,
- Brenden

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

My apple id has its region united states but i'm in japan right now i just bought a gift card and i cant reddem it.. Can i redeem it ?? If yes how can i do it

My apple id has its region united states but i'm in japan right now i just bought a gift card and i cant reddem it.. Can i redeem it ?? If yes how can i do it

This is a user to user forum. You have to wait for someone to reply to you. Please be patient.
Are you from the US? Do you have a US account? You can try to log into the Japanese store, but you might not be able to. Go into Settings>iTunes & App Stores, Click on your Apple ID, and change locations.

After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

You can always shut it down manually via the Task Manager
(CtrlShiftEsc)...
On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

My iPad mini adapter shorted...I bought a new one but since it charges very slowly and when charged to 100% it falls to 95% immediately after being unplugged...what might be the issue????

my iPad mini adapter shorted...I bought a new one but since it charges very slowly and when charged to 100% it falls to 95% immediately after being unplugged...what might be the issue????

When it does that. Replug the charger and charge to 100%. Now does is stay charged when you unplug the charger.
You may need to recalibrate your battery.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
 Cheers, Tom

I cannot select radial filter points after I create them in Lightroom. Anyone experience this issue before and what might be the solution?

I cannot select radial filter points after I create them in Lightroom. Anyone experience this issue before and what might be the solution?

Press H to hide/show control points.

I can only start my iBookG4 after deleting preferences. I have to go into single user mode to do so. If I don't go into single user mode, the computer shuts down during boot up. What might be the problem?

I can only start my iBookG4 after deleting preferences. I have to go into single user mode to do so. If I don't go into single user mode, the computer shuts down during boot up. What might be the problem? How can I fix this?

I do not have a startup disk. I did try fsck (based on what I learned from your reply-thank you). This failed (fsck); here is the message:
** Checking catalog file.
Invalid key length
(4, 8198)
** Volume check failed.
/dev/rdisk03 (hfs) EXITED WITH SIGNAL 8.
I am sure this is an easy fix; I just have no clue how.

Since one week my iphone, after synchronisation, gives me error message 13 objects could not get synchronized, look in itunes for more information. however, I dont find any info there

since one week my iphone, after synchronisation, gives me error message "13 objects could not get synchronized, look in itunes for more information." however, I dont find any info there, neither on the mac I synch with nor on the iphone

Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

I am new to Final Cut Pro, it is day 2. I want to export my project to a DVD I follow the instructions but after preparing the media nothing happens. What might be the problem

This is day 2 for me with Final Cut. I now want to burn my project to a DVD. After preparing the media nothing happens, there is no signal that there is any activity in any way. What might be the problem?

Did you open the background rendering HUD? Cmd-9.

After applying custom keystore in weblogic admin_server, server is not get started

Hi All, (Thanks in advance)
I have a big problem now. I applied the SSL configuration to weblogic and OBIEE. It was working fine with Demo Keystore. After creating selfsigned keystore and applying to weblogic admin_server, the server get shutdown and now it is not starting. here is the log, I have checked the username/password many times. also I removed boot.properties file and it get generated again during startup.
I used the following commands to generate custome keystores.
$JAVA_HOME/jre/bin/keytool -genkey -keyalg RSA -alias selfsigned -keystore identity.jks \
-dname "CN=`hostname`, OU=My Department, O=My Company, L=Birmingham, ST=West Midlands, C=GB" \
-storepass password1 -validity 3600 -keysize 2048 -keypass password1
$JAVA_HOME/jre/bin/keytool -selfcert -v -alias selfsigned -keypass password1 -keystore identity.jks \
-storepass password1 -storetype jks -validity 3600
$JAVA_HOME/jre/bin/keytool -export -v -alias selfsigned -file "`hostname`-rootCA.der" -keystore identity.jks \
-storepass password1
# Trust? yes
$JAVA_HOME/jre/bin/keytool -import -v -trustcacerts -alias selfsigned -file "`hostname`-rootCA.der" \
-keystore trust.jks -storepass password1
####<Apr 28, 2014 6:46:00 PM GST> <Info> <WebLogicServer> <MYHOSTSERVER> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398696360069> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Apr 28, 2014 6:46:00 PM GST> <Notice> <Log Management> <MYHOSTSERVER> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398696360215> <BEA-170019> <The server log file /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Log Management> <MYHOSTSERVER> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398696360232> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Diagnostics> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360426> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360522> <BEA-002622> <The protocol "t3" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360522> <BEA-002622> <The protocol "t3s" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360522> <BEA-002622> <The protocol "http" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360523> <BEA-002622> <The protocol "https" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360524> <BEA-002622> <The protocol "iiop" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360524> <BEA-002622> <The protocol "iiops" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360525> <BEA-002622> <The protocol "ldap" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360526> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360530> <BEA-002622> <The protocol "cluster" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360531> <BEA-002622> <The protocol "clusters" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360536> <BEA-002622> <The protocol "snmp" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360536> <BEA-002622> <The protocol "admin" is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360536> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <RJVM> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360571> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address         :7002 (SSL)
Public Address         N/A
Http Enabled         true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360611> <BEA-002609> <Channel Service initialized.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360633> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360633> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360634> <BEA-000406> <PosixSocketMuxer was built on Apr 24 2007 16:05:00>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360658> <BEA-000436> <Allocating 4 reader threads.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360659> <BEA-000446> <Native IO Enabled.>
####<Apr 28, 2014 6:46:00 PM GST> <Info> <IIOP> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360842> <BEA-002014> <IIOP subsystem enabled.>
####<Apr 28, 2014 6:46:09 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696369085> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Apr 28, 2014 6:46:09 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696369777> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370127> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_POF2C8zjWtAwo24sMoFyQ+Komsg=>
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370185> <BEA-090074> <Initializing Authenticator provider using LDIF template file /u01/app/obiee/user_projects/domains/bifoundation_domain/security/DefaultAuthenticatorInit.ldift.>
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370328> <BEA-090075> <The Authenticator provider has had its LDIF information loaded from: /u01/app/obiee/user_projects/domains/bifoundation_domain/security/DefaultAuthenticatorInit.ldift>
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370690> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/AdminServer/data/ldap/XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370716> <BEA-090074> <Initializing Authorizer provider using LDIF template file /u01/app/obiee/wlserver_10.3/server/lib/XACMLAuthorizerInit.ldift.>
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371107> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: /u01/app/obiee/wlserver_10.3/server/lib/XACMLAuthorizerInit.ldift>
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371736> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/AdminServer/data/ldap/DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371737> <BEA-090827> <LDIF template file /u01/app/obiee/wlserver_10.3/server/lib/DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371753> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/AdminServer/data/ldap/XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371753> <BEA-090074> <Initializing RoleMapper provider using LDIF template file /u01/app/obiee/user_projects/domains/bifoundation_domain/security/XACMLRoleMapperInit.ldift.>
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371787> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: /u01/app/obiee/user_projects/domains/bifoundation_domain/security/XACMLRoleMapperInit.ldift>
####<Apr 28, 2014 6:46:12 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696372038> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
####<Apr 28, 2014 6:46:12 PM GST> <Notice> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696372038> <BEA-090082> <Security initializing using security realm myrealm.>
####<Apr 28, 2014 6:46:12 PM GST> <Critical> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696372064> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
####<Apr 28, 2014 6:46:12 PM GST> <Critical> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372067> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
    at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
    at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
    at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
    at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
    at $Proxy36.login(Unknown Source)
    at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
    at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
    at $Proxy54.authenticate(Unknown Source)
    at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
    at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<Apr 28, 2014 6:46:12 PM GST> <Notice> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372142> <BEA-000365> <Server state changed to FAILED>
####<Apr 28, 2014 6:46:12 PM GST> <Error> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372143> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Apr 28, 2014 6:46:12 PM GST> <Notice> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372147> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Apr 28, 2014 6:46:12 PM GST> <Info> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372164> <BEA-000236> <Stopping execute threads.>

hi Puneeth, Thanks for the solution to run the weblogic. Now i have change SSL certificate to Demo. But also i have checked the default password for certificates is blank. i ran the following commad with blank password , and it runs without any error. After checking all these, I am getting the following error log, for bi_server1.
####<Apr 29, 2014 6:20:42 PM GST> <Info> <WebLogicServer> <AUHSPDC03OBIAP2> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398781242221> <BEA-000000> <WebLogic Server "bi_server1" version:
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Apr 29, 2014 6:20:42 PM GST> <Notice> <Log Management> <AUHSPDC03OBIAP2> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398781242366> <BEA-170019> <The server log file /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Log Management> <AUHSPDC03OBIAP2> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398781242383> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Diagnostics> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242643> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242773> <BEA-002622> <The protocol "t3" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242774> <BEA-002622> <The protocol "t3s" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242774> <BEA-002622> <The protocol "http" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242775> <BEA-002622> <The protocol "https" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242776> <BEA-002622> <The protocol "iiop" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242776> <BEA-002622> <The protocol "iiops" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242777> <BEA-002622> <The protocol "ldap" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242778> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242782> <BEA-002622> <The protocol "cluster" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242783> <BEA-002622> <The protocol "clusters" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242787> <BEA-002622> <The protocol "snmp" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242788> <BEA-002622> <The protocol "admin" is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242788> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <RJVM> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242802> <BEA-000570> <Network Configuration for Channel "bi_server1"
Listen Address         AUHSPDC03OBIAP2:9804 (SSL)
Public Address         N/A
Http Enabled         true
Tunneling Enabled     true
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Server> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242831> <BEA-002609> <Channel Service initialized.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Socket> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242853> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Socket> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242853> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Socket> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242853> <BEA-000406> <PosixSocketMuxer was built on Apr 24 2007 16:05:00>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Socket> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242878> <BEA-000436> <Allocating 4 reader threads.>
####<Apr 29, 2014 6:20:42 PM GST> <Info> <Socket> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781242879> <BEA-000446> <Native IO Enabled.>
####<Apr 29, 2014 6:20:43 PM GST> <Info> <IIOP> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781243056> <BEA-002014> <IIOP subsystem enabled.>
####<Apr 29, 2014 6:21:13 PM GST> <Info> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781273079> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Apr 29, 2014 6:21:13 PM GST> <Info> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781273641> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Apr 29, 2014 6:21:14 PM GST> <Info> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781274003> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_k2qDRpL7zl4bwzJMUfuX1cN+738=>
####<Apr 29, 2014 6:21:14 PM GST> <Info> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781274363> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Apr 29, 2014 6:21:14 PM GST> <Info> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781274872> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Apr 29, 2014 6:21:14 PM GST> <Info> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781274888> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Apr 29, 2014 6:21:15 PM GST> <Info> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781275099> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server bi_server1 for security realm myrealm.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781275100> <BEA-090082> <Security initializing using security realm myrealm.>
####<Apr 29, 2014 6:21:15 PM GST> <Critical> <Security> <AUHSPDC03OBIAP2> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398781275125> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
####<Apr 29, 2014 6:21:15 PM GST> <Critical> <WebLogicServer> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275126> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
    at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
    at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
    at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
    at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
    at $Proxy36.login(Unknown Source)
    at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
    at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
    at $Proxy54.authenticate(Unknown Source)
    at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
    at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275253> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file /u01/app/obiee/wlserver_10.3/server/lib/DemoIdentity.jks.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275282> <BEA-090169> <Loading trusted certificates from the jks keystore file /u01/app/obiee/wlserver_10.3/server/lib/DemoTrust.jks.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275289> <BEA-090169> <Loading trusted certificates from the jks keystore file /u01/app/obiee/Oracle_BI1/jdk/jre/lib/security/cacerts.>
####<Apr 29, 2014 6:21:15 PM GST> <Alert> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275470> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 00:12:27 GST 2002,
               To: Wed Mar 23 00:12:27 GST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275506> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275516> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275527> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275529> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275536> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275539> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275544> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275561> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275568> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Info> <WebLogicServer> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275581> <BEA-000307> <Exportable key maximum lifespan set to 500 uses.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275602> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275611> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275619> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275621> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275627> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275628> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275632> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275646> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <Security> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275651> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <WebLogicServer> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275833> <BEA-000365> <Server state changed to FAILED>
####<Apr 29, 2014 6:21:15 PM GST> <Error> <WebLogicServer> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275834> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Apr 29, 2014 6:21:15 PM GST> <Notice> <WebLogicServer> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275839> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Apr 29, 2014 6:21:15 PM GST> <Info> <WebLogicServer> <AUHSPDC03OBIAP2> <bi_server1> <main> <<WLS Kernel>> <> <> <1398781275857> <BEA-000236> <Stopping execute threads.>

TS5185 Hi After I have report a junk message I coudl not get Imessge from other iphone. and could not send any message in blue color but green which need to pay for.

Hi After I have report a junk message to 7726, I coudl not get Imessge from other iphones. and could not send any message in blue color but green which need to pay for. Does Apple blocked my imessage ? I have checked the setting. imessage is on.
Thanks,
J

Make sure that your date and time settings and time zone are accurate (Settings - General - Date and Time). Reset your phone to 'Set Automatically' and then try signing in again - this worked for me. My date/time settings were not automatic (candy crush cheats!!).

Photoshop elements 12.1: closes down right after opening the program, what can be the problem?

Hi!
I have just purchased Photoshop elements 12, and updated it to 12.1.
Installation and updating went well, but now the program closes down right after opening it.
What can be the problem?
Thanks!

Hi kalle-veikka,
If an organizer is not launching then try the steps mentioned in the given link :- https://forums.adobe.com/thread/1475087
If the issue is with editor then share the log file, locate the log path from given link :- http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0CDcQF jAC&url=http%3A%2F%2Fhelpx.ado…
Sarika

Can not get microphone after privacy on ipad 2 on ios 7, Can not get microphone after privacy on ipad 2 on ios 7

Can not get microphone after privacy on ipad 2 on upgrade iOS 702 . What can i doe ? Thans

The above helped me find this solution:
do the following steps:
General > Restrictions > [scroll down to ] PRIVACY: > Microphone > Allow changes
Not: Settings > Privacy > Microphone
If you are installing an app like Soundhound, you will have to delete it then just reinstall it. The app then will ask you if it is "OK" to use the microphone. Push "yes". Then go back to the Settings app and follow the chain:
Settings > Privacy > Microphone > SoundHound push tab to the right until it turns green and you are set.

Why is Codename Kids Next door series 1-5 available to buy in United States Itunes but not United Kingdom Itunes?

I hope you can help me.
I purchase songs/programmes fro UK itunes store, and I am interested in buying the Codename Kids Next Door series. I have seen on the UK Itunes that Series 6 is available for purchase, but not any of the other series.
I am interested in buying them, so I hope you can tell me why series 6 is available for purchase but not the others?
Many Thanks

Because whomever owns the U.K. distribution rights to that series has not provided/allowed itunes to sell it yet.

After entering "Country or Region" United States, I do not get a next button to advance through the process. What might be the cause?

Similar Messages

Maybe you are looking for