After installation - admin login fails

It appears that the installation went fine until I started the appserver and started the Administration Console . It prompts for the User Name and Password I created during the installation. However, when I enter the data, it doesn't recognize it and gives me an Authorization Failed error.
I am trying to login as admin and I know I have the password correct.
What did I do wrong?
-E.J.

Is your user name correct?
Also, in order to make it absolutely sure, you can do a little trick. Create another domain with the some user name and password of your choice using asadmin create-domain command and just copy config/admin-keyfile from new domain to old domain. For details, see:
http://blogs.sun.com/roller/page/bloggerkedar?catname=%2Fappserverfaq#a1
Thanks.

Similar Messages

Delegated Admin login fail

I installed Solaris 9 05/9 and JES05Q4 in a Sun Fire V440 recently.
I chose these components only:
Directory server
Administration server
Web server
Access manager
Messaging server
Delegated administrator
Directory preparation tools
I can use commadm to created users after installation and initial configuration, but I can't login to the delegated admin with any account. http://server.mydomain.com/da/DA/Login
After I check the DA log file, it shows:
WARNING: User [admin] has no valid role assigned, aborting login
What kind of role required for da login ?
Thanks in advance for any help.
dx

I recommend that you post your question to the Messaging Server forum (also listed at the bottom of the Java ES forums page):
http://swforum.sun.com/jive/forum.jspa?forumID=15
You might also want to search that forum for similar problem reports.

CF Admin login fails (invalid pw) for Windows User other than the one used to install CF 10

I installed CF 10 on a server running Windows Server 2008 R2 Standard having logged into the server as a Windows user in the administrator group. I set up CF 10 Administrator to use a single password (the default). I can log into CF Admin when authenticating to the server with the same Windows credentials used when installing CF 10 but if I log into the server as another Windows user in the administrator group I cannot log into CF Admin; I get an Invalid Password error. I thought the whole point of the single password was so that anyone who can log into the server could log into CF Admin. It works like that for my CF 8 and CF 9 machines.

It is a new design, based on security issues that arose in previous ColdFusion versions. See, for example, Charlie Arehart's blog for more details.

CSACS GUI login failed

DearPros,
After i installaed the CSACS 3.3 on windows 2003 server,when i access it via web browser i am getting the following message
http://192.168.100.3:2002
USERNAME :admin
PASSWORD : admin
Login failed...try again
I just login after the fresh installation.what is the defaukt username and password to use.
Thanks
swamy

Hi Swamy,
There is no default username and password associated with ACS software, as you are trying to access the server remotely you would first have to create an admin account on ACS server.
Logon to the server itself locally as ACS install Java runtime on it from www.java.com as 2003 does not have java pre-installed on it.Next open IE and goto http://127.0.0.1:2002
On the ACS GUI interface click on Administration Control-->Add administrator and create a admin account there make sure you click the Grant All button.
You can now login to ACS using this admin account.
I hope this helps.
Thanks
Gagan

Login to Glassfish (AS 9.1) Admin Module fails after AM 7.1 install

Hello Everyone,
I am trying to deploy Sun Java System Access Manager 7.1 on Sun Java System Application Server 9.1 running on RH Linux. After deploying the war file and performing the initial configuration using /amserver/configurator.jsp and then restarting the server instance, I am no longer able to login to the administrative module of the application server. Following error comes up in the Server.log file:
[#|2007-11-21T21:26:21.422-0800|INFO|sun-appserver9.1|javax.enterprise.system.core.security|_ThreadID=15;_ThreadName=httpWorkerThread-4848-0;admin;|SEC5046: Audit: Authentication refused for [admin].|#]
[#|2007-11-21T21:26:21.422-0800|WARNING|sun-appserver9.1|javax.enterprise.system.container.web|_ThreadID=15;_ThreadName=httpWorkerThread-4848-0;_RequestID=43616e0d-d1d5-4aaa-88aa-7e7913125a67;|Web login failed: Login failed: javax.security.auth.login.LoginException: No LoginModules configured for fileRealm|#]
In addition to running the configurator, I've also added the following permissions to the server.policy file:
grant codeBase "file:${com.sun.aas.instanceRoot}/applications/j2ee-modules/amserver/-" {
permission java.net.SocketPermission "*", "connect,accept,resolve";
permission java.util.PropertyPermission "*", "read, write";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.util.logging.LoggingPermission "control";
permission java.lang.RuntimePermission "shutdownHooks";
permission javax.security.auth.AuthPermission "insertProvider.Mozilla-JSS";
permission java.security.SecurityPermission "putProviderProperty.Mozilla-JSS";
permission javax.security.auth.AuthPermission "getLoginConfiguration";
permission javax.security.auth.AuthPermission "setLoginConfiguration";
permission javax.security.auth.AuthPermission "modifyPrincipals";
permission javax.security.auth.AuthPermission "createLoginContext.*";
permission java.security.SecurityPermission "insertProvider.Mozilla-JSS";
permission javax.security.auth.AuthPermission "putProviderProperty.Mozilla-JSS";
permission java.io.FilePermission "<<ALL FILES>>", "execute,delete";
permission java.util.PropertyPermission "java.util.logging.config.class", "write";
permission java.security.SecurityPermission "removeProvider.SUN";
permission java.security.SecurityPermission "insertProvider.SUN";
permission java.security.SecurityPermission "removeProvider.Mozilla-JSS";
permission javax.security.auth.AuthPermission "doAs";
permission java.util.PropertyPermission "java.security.krb5.realm", "write";
permission java.util.PropertyPermission "java.security.krb5.kdc", "write";
permission java.util.PropertyPermission "java.security.auth.login.config", "write";
permission java.util.PropertyPermission "user.language", "write";
permission javax.security.auth.kerberos.ServicePermission "*", "accept";
permission javax.net.ssl.SSLPermission "setHostnameVerifier";
permission java.security.SecurityPermission "putProviderProperty.IAIK";
permission java.security.SecurityPermission "removeProvider.IAIK";
permission java.security.SecurityPermission "insertProvider.IAIK";
Have I missed any steps? Are there any patches or workarounds for this issue?

Hi,
You can download the GUI files from this link according to the version you have:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=7.1&mdfid=277641082&sftType=Unified+Communications+Manager+Express+Complete+Support+File+Set&optPlat=&nodecount=3&edesignator=null&modelName=Cisco+Unified+Communications+Manager+Express&treeMdfId=278875240&treeName=Voice+and+Unified+Communications&modifmdfid=null&imname=&hybrid=null&imst=null&lr=Y
1. Download appropriate tar file to tftp server. cme-basic-x.x.x.tar ? contains basic CME
system files including GUI, MoH and phoneloads
cme-gui-x.x.x.tar ? contains basic CME GUI files only
2. Logon to privileged EXEC mode of router CLI
3. Enter archive command to extract contents of tar file to router Flash memory:
Router# archive tar /xtract tftp://ip-address/filename flash:
Example 1:
To extract contents of cme-basic-3.0.3.tar from tftp server 192.168.1.1 to flash:
archive tar /xtract tftp://192.168.1.1/cme-basic-3.0.3.tar flash:
Example 2:
To extract contents of cme-gui-3.0.3.tar from tftp server 192.168.1.1 to flash:
archive tar /xtract tftp://192.168.1.1/cme-gui-3.0.3.tar flash:
This will update all the gui files in the location which the gui checks on the flash.
Regards,
Tere

User logins fail; admin login is okay

I'm running 10.3.9 all the latest updates on a 1 Ghz DP G4 with 1Gig RAM.
Admin login works fine; three user logins go nowhere... beachball just spins and I have to power off the comp to get out.
If I log in as Admin user and switch to another login, password is accepted but the desktop remains blank.
Running the comp in target mode, I can see the files of the various users.
Disk Utility looses connection (as mentioned in another post), not certain if this is also an iTunes update issue.
Any ideas?
Thanks!
1Ghz DP G4 Mac OS X (10.3.9)

After following the information to move iTunes to the desktop, I was able to run Disk Utilities and repaired persmssions.
However, there was no change in the ability for users to login. These users are managed, not standard.
I reinstalled OS 10.3 in archive mode, checked logins (which were fine) and installed the 10.3.9 update. Logins are broken again.
I can change the users to standard and they can login with no problem, but the moment I restrict anything (such as cannot change the dock) the logins fail.
Changing the users to standard allows logins; make them managed and they fail.
Certainly seems like a permissions issue, but repairing permissions does no good.
Any suggestions other than doing a clean install?
1Ghz DP G4 1 gig memory Mac OS X (10.3.9)

COM+ Event System failed to fire the StartShell and Logon method after installation of PM 1.43

Hi Guys,
After installation of Power Manager 1.43, the following errors were immediate shown at event viewer: COM+ Event System failed to fire the StartShell and Logon method on subscription {F6FE5592-FCBC-44AD-A836-D37F5085ED5B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The subscriber returned HRESULT 80004001.
Please advice if this is a known issue? Thanks!

Hello,
this is a known problem. See this thread
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

Tried to install Illustrator CC and after 98% installation it said "failed" to install. Why?

Tried to install Illustrator CC and after 98% installation it said "failed" to install. Why?

The message I got was, 'Download error. Press retry to try again or contact customer support.(49).'

Integrated Security results in Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON' after code deployment

Sometimes, when we deploy new code to the server, we're getting the following error:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
we're using windows authentication and in our connectionstring use integrated security.
Only after restarting the server, the application can connect to the DB again. restarting IIS or recycling the application pool doesn't help.
Our application pool is configured using ApplicationPoolIdentity and we would like to keep it as such.
Any idea what we can do to prevent this error from occurring almost every time we deploy code?
Thanks

Hi amisol,
Thanks for your post here.
For your issue is related with asp.net security ,i suggest that you can post your issue to the link below:
http://forums.asp.net/25.aspx/1?Security
Best Regards,
Kevin Shen.

Archlinux fails to find lvm volumes after installation

Hi,
yesterday i installed archlinux on a logical volume, root and boot are both on this volume (/dev/mapper/volg-arch).
the filesystem is ext3. the setup recognized the volume group and activated all volumes, so the installation was no problem, but when i try to start the system after installation, no volume group can be found.
lvm2 was enabled during installation using USELVM="yes" in rc.conf and HOOKS="base udev autodetect pata scsi sata keymap lvm2 filesystems" in mkinitcpio.conf.
i use grub2 to boot the system with the following entry
menuentry "Arch" {
linux (volg-arch)/boot/vmlinuz26 root=/dev/mapper/volg-arch
initrd (volg-arch)/boot/kernel26.img
it boots, however it cannot find any volume groups and because of that cannot load the root-filesystem.
my other linux-system works great, which is installed on lvm2 and using grub2, too.
did i miss a configuration?

yes, grub2 supports it., which is really great.
mkinitcpio was run after modifying mkinitcpio.conf automatically by the setup.
its really odd that it works during the setup but not later.
:: Running Hook [lvm2]
Scanning logical volumes...
Reading all physical volumes. This may take a while...
No volume groups found.
Activating logical volumes...
No volume groups found
:: Running Hook [filesystems]
then it fails with errors (because of course no root-device could be found) and the ramfs-shell is started.
i think lvm-support is enabled,
because it is scanning for volumes.
edit:
just tried to boot with the following entry
menuentry "ArchInstall" {
linux (volg-arch-install)/isolinux/vmlinuz root=/dev/mapper/volg-arch
initrd (volg-arch-install)/isolinux/initrd.img
this is the volume where i copied the install-cd to (i have no cd-drive and did a hdd-install) and installed the system from.
IT WORKS! but of course it takes too long to load this setup-initrd for using the system.
so my initrd, generated by the setup, is wrong :-/
any hints?
Last edited by Lazer (2007-10-18 16:08:47)

Login failed. Please verify your login information or contact the sys admin

Hello
I've recently installed Oracle EBS 11.5.9 on Red Hat x-86 based linux.
I'm able to see the EBS login page but i can't login as SYSADMIN / SYSADMIN.
Infact i can't login @ all.
Error
Login failed. Please verify your login information or contact the system administrator

Hii Fadi
I plan to remove to EBS from my NAS partition and redo the whole thing cuz i've learned that i missed some steps in terms of OS parameters.
Just clear my 2 questions.
1.Teach me how to run rapid wiz from staging.
The default path in the last installation was /d01/Stage11i/and so on.I added only NAS directory destination path /vision before /d01 and when the install ran it asked me to manually provide source path and didn't run automatically.
NOW what i plan is
1.My NAS partition is called /vision. My stage directory named Stage11i is on local HD.I plan to copy my stage directory to NAS drive and run rapidwiz on my NAS from my stage directory and take all directory paths as default and move with the default installation.I believe this way rapidwiz would go automatic and install EBS overnight.No
Is my approach correct. ??.
2.My Linux x-86 RH4.0 is a test system running on 10.x.x.x ip network in the bank and it can be reached ( pinged ).However its not allowed to use DNS like the rest of the system.
In such a situation teach me howto resolve the DNS problem so that my team in the bank is able to access it from remote locations.
Tell me in terms of exact entries in the host file.
To me DNS shouldn't matter as long as i can ping the system.Cuz in the last instalation i was able to see the default EBS login page from remote bank site on the same network.
Secondly do post your blog link or email it to me at [email protected]
Regards
Fahad

How to redirect to a page after login fails?

Since I am working on an automated login from Forms I would like the login page to redirect to an error page if the login fails. I can't seem to find an option for this.
I am using a public page that branches to 101 with BRANCH_TO_PAGE_ACCEPT, but when login fails I see this login page.
Instead of that I would like to redirect to a public page that shows a message.
How can I do this?
Wendy

A login failure is when the user and/or pass is not correct. I do not want to show page 101 but a different page when this happens.
I am using the default login page but I am calling it with BRANCH_TO_PAGE_ACCEPT so the user never sees it and I want to keep it that way....

Flash Builder failed to lunch after installation.

Adobe Flash Builder can't lunch after installation completed successfully. it says to uninstall and reinstall again. if problem continues, contact adobe support. and it says: "error: 5"
~ Then after I uninstalled it. Download it again and reinstall again, same result. I did this numerous times now and no tech solutions so far!
What is going on here and how to fix this?

don't worry, it works now, after i rebooted the machine.

My login failed. I am the admin.

Put imac to sleep last night. This morning my login failed. I restarted it. Still failed. Any ideas?

Changing or resetting an account password

After installation - admin login fails

Similar Messages

Maybe you are looking for