After installing itunes I get an error that says that I have to unistall and reinstall itunes because I'm missing something but it does not tell me what it is.
After installing itunes on my pc i get an error that says that i have to uninstall and reinstall itunes. I finally got it to down load and now it says that I need an upgrade. It's getting very frustrating as I've never had this kind of trouble.
What is the precise wording of the message that is appearing?
What OS is on the computer?
Similar Messages
-
When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work
For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.
I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck! -
When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!
Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe? -
Yesterday, I went to the site for levno computers, using my web access for my work email. I opened the page to view the outlet items and was never able to get back out of it. Finally used ctrl,alt,delete and ended the task. After that the this is what my task bar looks like, I cannot resize or exit using tabs at the top or bottom they are not showing, nor is start showing in the lower left hand corner where I like it. I tried uninstalling and reinstalling that did not help.
== This happened ==
Every time Firefox opened
== July 9, 2010Hello Sher.
If you're talking about the menu bar, press ALT or F10 in your keyboard to make the Menu Bar temporarily visible. If you want it to be permanently visible, go into ''View > Toolbars > Menu Bar'', or right-click the Navigation Toolbar (the Reload button, for example) and select ''Menu Bar''.
If this doesn't help, right-click the navigation toolbar, select ''Customize...'' and click ''Restore Default Set''. If it doesn't appear right away, try pressing ALT or F10. You can go into ''View > Toolbars > Menu Bar'' to make it permanently visible, or right-click the Navigation Toolbar and select ''Menu Bar''.
If none of this helps, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Try disabling all add-ons (just to check), to see if Firefox goes back to normal. -
Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges. I am the administrator. I have tried everything I can think of. When I click the ingore option it doesn't install corectly and I get a message saying MSVCR80.dll file is missing.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Everytime I try to update to Itunes 11 I get an error message saying that Itunes has an invalid signature and can't be installed? I have tried to install it two times and get the same message each time. Any solutions to my problem?? Those who have installed ITUNES 11 is it hard to work with? maybe im lucky it wont update?? I don't know.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After installing CF10, I get this error msg,"This page can't be displayed"
After installing CF10, I get this error msg when I try to access the Administrator page,"This page can't be displayed"
I'm running Window Server 2003, 64 bit version with IIS 6.0.
Before I installed CF10, I uninstalled CF8.@Len said, “ BTW, there is no 64 Bit entry under Application Pools.”.
I suspect @Anit was assuming you were using IIS 7, in which case you could check the IIS app pool (advanced settings, for the app pool used by the site you are browsing) to see if it was set to “enable 32-bit applications: false”, assuming CF is configured as 64-bit, or if CF is configured 32-bit, then you would want that to be set to “enable 32 bit applications: true”.
It seems you’re using IIS 6, and there is no GUI means in the IIS 6 control panel to change the bitness of the app pool. There are various means discussing how to do that on the web, as well as a blog entry from Ben Forta, from back when people were deploying CF 7 (which was 32-bit only) 64-bit Windows and IIS:
http://www.forta.com/blog/index.cfm/2006/2/6/connecting-coldfusion-mx-7-to-64bit-iis-6
For those on IIS 7, here is at least one page showing how to configure it in IIS 7 (has no reference to CF, but I had a hard time finding any existing blog entry that showed screenshots of configuring this feature):
https://help.webcontrolcenter.com/KB/a1114/how-to-enable-32-bit-application-pool-iis-7-ded icatedvps.aspx
But back to your error, @Len, if setting the bitness of the IIS app pool is not the solution, I’ll note that there can be many other reasons that you get that error. What are you seeing in the Windows Event log (using “event viewer”), or the IIS logs (especially httperr.log), or the CF logs (\coldfusion10\cfusion\logs)?
/charlie -
When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation." But it gives me no more information as to what I can do. Help please?
Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?
-
Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?
Find out what that third party software the kext file belongs to and update or use the developers method to uninstall the third party software responsible for it.
I suspect it's a iTunes extension perhaps?
You also can use the manual method of Finder > Go > Computer and opening your drive, then your System/Library/Extensions folder and looking for the file and moving it out onto the desktop, you will need to be in Admin user and use your password, then reboot to clear the random access memory. However this method doesn't remove the parent program you still need to do that.
How to uninstall/install software on your Mac
The kext file wasn't loaded, so it's not running, but removing it from the Extensions folder or uninstalling what put it there will solve your notification problem as that's all it appears to be. -
I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."
-
When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014
Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension> -
When I access the itunes store I get an error message saying that Itunes has detected a problem and has to be closed. The rest of Itunes is working fine... Any help?
There could be any number of items causing this. First off is do you have an active internet connection? If so have you tried rebooting you computer?
Maybe you are looking for
-
Cannot deploy webdynpro project from SP11 of developer studio
Hi All, I have recently upgraded was java from SP09 to SP11 of netweaver 2004s. I have also upgraded developer studio to SP11. Now I cannot deploy webdynpro project from upgraded developer studio. SP09 developer studio can still deploy webdynpro proj
-
Preview doesn't do the obvious...
I am trying to set up a simple presentation of a series of images. I can create a slideshow of them in Preview but can not save the slideshow. It would have been obvious to let you save them as a QuickTime movie or print them to a multi-page pdf file
-
How can I shut off software update prompts
Hello, We use iPads - mostly 2nd gens - at some customer sites for tracking times. The devices are in kiosk cases, locked down, no access to the Home button, gestures shut off, etc, etc. Essentially, once on the screen we wanted displayed, there is n
-
Project.java is a simple drawing program. Modify the program to draw not only circles, but rectangles, filled circles, filled rectanges and lines. Modify the program so the user can change the color of a shape and clear the drawing. Use proper object
-
Can I take 2 quicktimes and stitch them together and just save it out? Bones