After PXE boot to machine nothing shows up. Blank SCCM page with no option to install OS images.

I am working on using PXE with SCCM 2012 and finally got my test VM to boot with the standard x86 boot image. This is the process:
1. Start up VM with no OS
2. Contacts SCCM and I press F12 to Network Boot
3. Boots into a SCCM screen and says " Windows is starting up" then " Preparing Network Connections".
4. Then all i see is a blank screen. After about a minute it will just reboot.
I found this post that discusses adding the drivers need for the boot images:
http://social.technet.microsoft.com/Forums/en-US/fd96466b-0521-48d8-b31e-4477468982fe/sccm-pxe-boot-initiated-but-nothing-happens-after-that?forum=configmgrosd
I added the entire VMware tools Driver folder to both my boot images. (All it had in there was a SCSI adapter)
Tried to redo the PXE and still get the same menages with the blank screen after that.
What am I missing here?

Sounds like your boot image is missing network drivers...
Couple of checks though:
If the VM in case has already been introduced somehow to ConfigMgr, check Devices -node from the console and search for "Unknown", if there are objects named "Unknown" (not the default x86 or x64 objects!), delete them
Add command line support (F8) to your boot image
Boot your VM, as soon as you get in to WinPE, hit F8 to open command prompt
Run ipconfig to see if the VM get's IP address
If the VM doesn't get IP address, you probably don't have the correct network driver in your boot image. You can obtain the correct driver by installing OS (the same architecture as you boot image, and based on the same FullOS of your boot image, ConfigMgr
2012 RTM=WinPE3.1=Windows 7, SP1=WinPE4.0=Windows 8, R2=WinPE5.0=Windows 8.1) on to your VMware VM and then use this tool:
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d to capture the needed drivers. Then you can import those drivers to ConfigMgr, categorize them and add the LAN and SCSI drivers to your boot image.

Similar Messages

Help help please...Photoshop CS, on a Windows XP machine. After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this p

Help help please... I'm running Photoshop CS, on a Windows XP machine. After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this product I must re-activate it". BUT the activation link informs me that they no longer support the product (neither online nor telephonically). So how can I re-activate this software?

Hello Helios & Eb29075,
+1. Please check log file for error message.+
+2. Check status of EM.+
+3. Please see:+
+How To Drop, Create And Recreate DB Control In A 10g Database [ID 278100.1]+
+Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole__ not found [ID 555218.1]).+
As you said above, yes, I did find OC4J config issue & EM Config issue and resolved them. But still I couldn't get my DBConsole started.
Yes, I was able to drop DBConsole<sid> service using 'emca' repository drop. But, when I started recreating repository for DBConsole service, I wasn't able to do it. I tried several times but in vain.
Thanks,
A.P.

W520 - BIOS update (8buj19uc.iso) hangs after PXE booting

After PXE booting the latest 1.40 BIOS bootable CD,
the system hangs after pressing "2. Update system program"
Here my setup:
LABEL w520bios
MENU LABEL ^w. BIOS V1.40 W520 - 32bit - Normal    - ISO - (EN)
TEXT HELP
* Boot the W520 BIOS ISO image over PXE
ENDTEXT
LINUX memdisk
INITRD ../isos/bios/w520/8buj19uc.iso
APPEND iso raw
I need this feature, because we have several thinkpads to update!
Any help regard this topic is greatly appreciated

I had no clue what PXE is, so I looked it up:
The Preboot eXecution Environment (PXE, also known as Pre-Execution Environment; sometimes pronounced "pixie") is an environment to bootcomputers using a network interface independently of data storage devices (like hard disks) or installed operating systems.
http://en.wikipedia.org/wiki/Preboot_Execution_Environment
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674

It says I can drag Pages documents from iMac to iCloud. But nothing shows up. Using latest with all turned on. How do I get Pages up to iCloud? The little wheel like action menu does not appear.

It says I can drag Pages documents from iMac to iCloud. But nothing shows up.
Using latest with all turned on. How do I get Pages up to iCloud? The little wheel like action menu does not appear.

yes is tehre another way
the directions do not explain anything other than drag
or use the little action wheel menu

I purchased Fifa13 from the App Store, downloaded it in my pc..,but whrn i am trying to install it in my iad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa

I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
What can i do?
btw....,its happeniing only wth the fifa13, installed other apps from pc previously.

anybody answer me fast

After upgrade to ios7 on iPad mini, iTunes Store shows a blank white page.

After upgrade to ios7 on iPad mini, iTunes Store shows a blank white page. I ve rebooted, restored, reset, still not working.
Also having issues with some of my apps which I use to use every day before the upgrade. Nightmare....
What can I do to solve this problem?

You didn't mention which reset you tried that didn't work ...
Try this reset ...
Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
Try the iTunes Store.
No data is lost due to a reset.

After Mavericks OS upgrade, can no longer make any HTTP requests with the OPTIONS verb

My machine can no longer make any HTTP requests with the OPTIONS verb. This happens whether I try it curl, postman, or ajax.
curl -i -X OPTIONS http://www.google.com returns curl: (52) Empty reply from server
It should return a long string containing a 405 error code.
I suspect that this is related to the Mavericks upgrade I did earlier this week. I only have one mac (my dev machine) with Mavericks. Other macs are Mountain Lion and they don't have this problem.
Can anyone else with Mavericks confirm whether or not they have this problem too?
If this is Mavericks related, anyone know of a fix or workaround?

Turns out that it wasn't Mavericks related at all. Cisco AnyConnect has a security module running behind the scenes even when you're not VPNed into anything. It was blocking my OPTIONS verb requests. I was able to make these calls after uninstalling.
Re-installing with Web Security turned off should prevent it from happening. While I was uninstalling I did notice that there was a web security uninstall script in /opt/cisco/vpn/bin but I already committed to taking the whole app off my machine. Simply running that script could have done it too.
I must give credit to Ben Nadel. It was his blog post that helped me fix this issue.
http://www.bennadel.com/blog/2559-Cisco-AnyConnect-VPN-Client-May-Block-CORS-AJA X-OPTIONS-Requests.htm?&_=0.10495476494543254#comments_44093

I just installed win 7 using bootcamp only after windows booted I see nothing pertaining to bootcamp and on restart I do not get a choice to boot on OSx. It is like OSx isn't there any more. I don't have the drivers either. Any ideas?

It seems as if Windows is the only operating system, but the disk shows only the space that I gave for Windows not the entire 500 GB.

Reboot, hold the option key down at the chime, release it when the boot manager appears, select OSX
You really need to read the Boot Camp Documentation, and do you have a backup (in case you can't recover?)

IE 11 nothing show very old asp page

IE 11 show blank on a very old site (there are something by view code)
Before we use IE 8 (XP) without problem
after site is added to intranet in IE 11, it shows up
then internet rights are set according to intranet, it still shows blank page
what is the problem? thx.

Hi,
Let’s add this sites in compatibility list to fix this kind of compatible issue:
Fix site display problems with Compatibility View
http://windows.microsoft.com/en-IN/internet-explorer/use-compatibility-view#ie=ie-11
Alex Zhao
TechNet Community Support

I installed Lion Server and when I click on the Profile Manager I get an error and nothing shows - I can't figure out how to re install Lion Server to fix this - any ideas

I installed Lion Server on my Mac Pro. Everything looked to be working until I checked Profile Manager and I get an error message "Error Reading Settings" Not sure how to fix it. Tried to download Server agian but can't.

Look at /usr/lib/libpq library. I have had the same problem. There were following files:
-rwxr-xr-x 1 root wheel 163680 30 jul 21:17 /usr/lib/libpq.5.4.dylib
lrwxr-xr-x 1 root wheel 15 30 jul 21:20 /usr/lib/libpq.dylib -> libpq.5.4.dylib
Result for command sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh was:
Password:
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Couldn't drop device_management : #<RuntimeError: Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)>
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/activerecord/lib/active_record/connection_adapters/abstract/connection_spe cification.rb:76:in `establish_connection'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:69:in `create_database'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:31
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `call'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 597:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor. rb:242:in `synchronize'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 590:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 583:in `invoke'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2051:in `invoke_task'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2023:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2001:in `run'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 1998:in `run'
/usr/bin/rake:31
Couldn't create database for {"adapter"=>"postgresql", "username"=>"_devicemgr", "encoding"=>"UTF8", "pool"=>5, "database"=>"device_management"}
devicemgr:state = "STARTING"
There was missing symlink to right version of libpq dynamic library!
After I entered the following commands and now it works well for me:
$ cd /usr/lib
$ sudo ln -s libpq.5.4.dylib libpq.5.dylib
$ sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
devicemgr:state = "RUNNING"
Milan

HT1491 Going into iTunes from my iPhone 4...the page where it is supposed to be showing tones or music(I can switch between them all) is nothing but a blank white page...how do I fix this?

It worked the first couple days...I even purchased ringtones.

instead of writing such an essay, you could have explained better what you tried to do to get them.

After restoring my iPad Mini, iTunes showed "There is a problem with your iPad", what to do?

Help please.. what to do with my iPad??

that message does not give you alot to go on....
I would try to sync again, and see what happens. If that does nmot work, try a DFU restore. If that fails, I fear you are going to need to go to the store for their help.
DFU page
http://support.apple.com/kb/HT1808

Who I can show table in web page with WebDympro?

Hi all,
I'm worked in a proyect with Sap Netweaver Developer Studio. I like show a table of SAP in a web page. I use a Bapi for get date of the table sap and after this date i like show in a page web. For show in a page web i think that must user WebDympro but i don't know how make.
Please Help
Thank's in advanced
Vicente Zaragoza

There is a tutorial available:
<a href="
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/handling%20transactions%20with%20bapis%20in%20web%20dynpro.pdf
">https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/handling%20transactions%20with%20bapis%20in%20web%20dynpro.pdf</a>
Armin

When I open Mozilla Thunderbird mail it shows an icon'home' page with Email/Accounts/Advanced Features. How do I get out of this and back to my regular Email .

I'm sorry but I have lost my ability to get back to my opening Thunderbird page. It was working but went to a completely different start -up page as I mentioned in my original statement in my question. Also the system is very slow to respond and will repeatedly say it is not responding.

That is the screen that displays when you click on the actual email address in the Folder Pane instead of the Inbox folder.
If you have a folder pane showing click on the Inbox folder to see your mail.
If you are missing the folder pane, turn it back on.
From the Menu Bar select View-Layout-Folder Pane
No menu bar showing? Press the alt key.

Two times and dates show on the first page with an old set under the correct set.

I have a second tine and date showing on the first display page, like a shadow under the correct date and time. This is happenong on my iphone5, but was also there on my 4. Any ideas?

I would go to settings-general- reset all settings, if that doesn't work I'd do a reboot, and finally if I couldn't get that to work I'd do a restore as a new phone.

After PXE boot to machine nothing shows up. Blank SCCM page with no option to install OS images.

Similar Messages

Maybe you are looking for