After upgrading kernel panic....
I upgraded Safari to 3.1.1 and when I did the automatic shut down after the update, the mac had a kernel panic. What do I do!?
Here is my fix:
- Downgrade back to iTunes 8.0
- Repair permissions
- Restart and zap the PRam
- Shutdown
- Start in Single User mode and execute fsck -f command
- Reboot and it's back to stable...
Hope it helps.
Similar Messages
-
Looking for a Reboot Tool that initiate a reboot after a kernel Panics?
Hello
Is their a program around that can be installed on OS X that initiate a reboot after a kernel panics occured? Or is it possible change the parameter of the firmware to reboot after a kernel panics. Some Tools like TinkerTool are able to change to sleep mode of the mac, maybe another tool is able to change the reboot mode
Regard
GérardUse a dongle such as this one. Implementation of it in software alone requires Mac OS X Server.
(40598) -
Error messages after upgrading kernel (devfs to udev) [SOL]
when installing the new kernel i got a message to change my menu.lst so it changed "/dev/discs/disc0/part3" to "/dev/hda3" (and nothing else) cause of udev instead of devfs.
after rebooting i get few error messages:
[after network start]
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
SIOCSIFBRDADDR: No such device
etho0: unknwon interface: No such devicekjs wrote:I'm also having an issue after upgrading neither eth0 nor eth1 are showing up in /dev .... I think it's due to the switch from devfs to udev...
for the record - network interfaces never show up in /dev - they're not normal devices
edit: I guess I should provide some help...
ifconfig and "ifconfig -a" will list network devices (also in /proc/net somewhere). If you do not have a network device that means that your module is not properly loaded for that device.
This should have nothing to do with a devfs/udev switch and everything to do with a kernel upgrade.
Just for some more info, can you please report the output of:
· lsmod
· uname -r
· ls /lib/modules
· ifconfig -a -
Help please - occasional shut-down after sleep & kernel panic
Hi all.
I have an intermittent problem here with an iMac 24in 2.66Ghz Intel Core 2 Duo model. This iMac was bought refurbished from the Apple store about 6 weeks ago.
About once a week, after putting the iMac to sleep, I come back to it later to find it has shut down. The only way to restart is to unplug from the wall and then plug in and switch on as normal.
This has happened on three occasions in the last couple of weeks, and by looking in System/Library/Logs/Diagnostic Reports I found what looks like a record of a kernel panic:
Interval Since Last Panic Report: 212782 sec
Panics Since Last Report: 1
Anonymous UUID: 78A693FE-D742-4CE4-8B70-71AEA8969BD7
Mon Nov 2 09:06:27 2009
panic(cpu 0 caller 0x1153324): "pmExitHaltToOff: CPU 1 not in LCPU_HALT(5)"@/SourceCache/AppleIntelCPUPowerManagement/AppleIntelCPUPowerManag ement-90/cstateCPU.c:2068
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5877bcc8 : 0x21acfa (0x5ce650 0x5877bcfc 0x223156 0x0)
0x5877bd18 : 0x1153324 (0x11603ac 0x1 0x5 0x120)
0x5877bd58 : 0x2aeb5d (0x5279e0a4 0x0 0x5877bd88 0x4fe457)
0x5877bd88 : 0xef36c8 (0xef31d2 0x3 0x0 0x221bd7)
0x5877bda8 : 0xef6b4e (0x814b000 0x2 0x0 0x8156080)
0x5877bdc8 : 0x55c367 (0x817ac80 0x860720 0xffffffff 0x0)
0x5877be18 : 0x571d45 (0x814b000 0x15 0x5877be48 0x4fa0a0)
0x5877be78 : 0x53db00 (0x7fc3400 0x4 0x1d 0x2)
0x5877beb8 : 0x53dbe1 (0x7fc3400 0x9647700 0x5877bee8 0x80e4e00)
0x5877bed8 : 0x5433ef (0x7fc3400 0x88de480 0x0 0x5404c5)
0x5877bf28 : 0x53af2f (0x7fc3400 0x88de480 0x80e4e00 0x57192e)
0x5877bf58 : 0x54707a (0x80e4e00 0x1 0x5877bf88 0x546c31)
0x5877bf88 : 0x5474d4 (0x8129440 0x8f29000 0x58cfdc 0xffffffff)
0x5877bfc8 : 0x29c68c (0x8129440 0x0 0x10 0x8e6eba0)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(90.0.0)@0x1151000->0x1168fff
com.apple.driver.AppleACPIPlatform(1.3)@0xee9000->0xf29fff
dependency: com.apple.iokit.IOACPIFamily(1.3.0)@0x91e000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10B504
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: iMac9,1 (Mac-F2218FA9)
System uptime in nanoseconds: 212722738568754
unloaded kexts:
com.apple.driver.AppleUSBEthernetHost 2.0.0 (addr 0x58772000, size 0x16384) - last unloaded 123544687746330
loaded kexts:
com.apple.filesystems.webdav 1.6 - last loaded 201550497698325
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.driver.AppleMikeyHIDDriver 1.1.7
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.AppleMikeyDriver 1.7.4a1
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.AppleLPC 1.4.6
com.apple.driver.AGPM 100.8.15
com.apple.driver.AppleIRController 161
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.NVSMU 1.1.7
com.apple.GeForce 6.0.2
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 201
com.apple.iokit.CHUDProf 212
com.apple.driver.AppleBacklight 170.0.2
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.iokit.SCSITaskUserClient 2.5.1
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.nvenet 1.0.58
com.apple.driver.AppleUSBHub 3.7.8
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleSMBusController 1.0.2d0
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.nvidia.nv50hal 6.0.2
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.NVDAResman 6.0.2
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.1f7
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.AppleSMBusPCI 1.0.2d0
com.apple.iokit.CHUDKernLib 203
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 40
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2.1f7
com.apple.driver.AppleUSBBluetoothHCIController 2.2.1f7
com.apple.iokit.IOBluetoothFamily 2.2.1f7
com.apple.driver.AppleUSBHIDMouse 1.3.0f1
com.apple.driver.AppleHIDMouse 1.3.0f1
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.1
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IONetworkingFamily 1.8
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 4 GB, SMC 1.45f0
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.91.19)
Bluetooth: Version 2.2.1f7, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD6400AAKS-40H2B0, 596.17 GB
Serial ATA Device: OPTIARC DVD RW AD-5670S
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1002, 0x04300000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0x04320000
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x0205, 0x04310000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
Since this last one I have reset the PRAM/NVRAM and updated to OS X 10.6.2. Is this likely to help or is there a more fundamental problem here?
Thanks for any help on this.HI,
"AppleIntelCPUPowerManagement-"
First, try resetting the SMC. (System Management Controller)
http://support.apple.com/kb/HT1543
Considering this iMac is well within the one year limited warranty, I'd take it back if resetting the SMC does not work. You should not have to trouble shoot kernel panics whether it's refurbished or not but read here for help to resolve kernel panics... something might help.
http://www.thexlab.com/faqs/kernelpanics.html
If you have installed any 3rd party software / hardware, uninstall and try using the iMac to see if it's stable.
Carolyn -
After a kernel panic my log says hfs removed orphaned or unlinked files and directories
Today, September 14, I had my first ever kernel panic on a MacBook Pro that was purchased in July of this year. After reboot, a file that I use every day seemed to be missing all updates since September 6. There were no newer versions in my TimeMachine backups either. During my investigation to determine how that could be, I found these entries in my log of the post-panic reboot:
Sep 14 12:49:12 localhost kernel[0]: hfs: mounted xxx on device root_device
Sep 14 12:49:12 localhost kernel[0]: hfs: mounted xxx on device root_device
Sep 14 12:49:12 localhost kernel[0]: hfs: Removed 596 orphaned / unlinked files and 1920 directories
Sep 14 12:49:14 xxx kernel[0]: hfs: mounted Recovery HD on device disk0s3
Sep 14 12:49:14 xxx kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
Sep 14 12:49:15 xxx kernel[0]: hfs: early journal init: volume on disk1s2 is read-only and journal is dirty. Can not mount volume.
Sep 14 12:49:31 xxx kernel[0]: hfs: Removed 0 orphaned / unlinked files and 91 directories
Sep 14 12:49:31 xxx kernel[0]: hfs: mounted MacBook Backup B on device disk1s2
The removed orphans and directories seem very concerning to me. Is there a way to tell what was removed and why?
What should I do next?You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
Resuming a burn after a kernel panic
I was burning a long audiobook in the background while dealing with email, walked out of the room for a minute and returned to find that there was a kernel panic. Before I had to reboot, the burn was on the last CD of the 3rd part of a 4 part audiobook. The computer, of course, kicked out the CD during reboot.
After the dust settled, I put the CD back in the computer to see what, if anything, I might be able to tell about its status. It does not show up in the devices list as a finished CD would.
Is there any way to resume this burn successfully? I hate to have to burn all 7 disks of the 3rd part over again just to get the last one. How can I get JUST the sound file for the 7th section?If your HD is unbootable, some of these options will not work with a stuck CD. Because the CD in question is not a bootable CD, the Mac will try to boot from the HD. But since it can't (cause the OS is messed up) it'll crash and stop booting.
In my experience, holding down the OPTION key while booting has sometimes worked - because it forces the unit to wait for user input on the startup disc. When you're in the grey menu, press and hold down the EJECT key on your keyboard and your CD might eject. -
White screen with file icon and Question mark after a kernel panic???
I'm using my girlfriends 20" iMac and her computer keeps having kernel panics. And then at times when we restart the computer, we get a white screen with a file icon and a question mark inside. Any ideas on what to do???? Her graduation project is on that computer and she is stressed like you wouldn't believe. Safe to say, I'm taking the brunt of it. Please help!!!
It sounds like you might be having a hard drive problem. The folder icon with question mark means the computer can't find a startup drive/system folder. I suggest that you back up all important data, especially her project. Before bringing it in for service, run the Apple Hardware Test - put in your original system restore DVD and restart the computer, holdng down the "D" key. Run the extended diagnositics (it will take over an hour (depending on how much RAM you have) and will tell you if there is anything wrong with your hardware. If it dinds a problem then you can take it to the nearest Apple authorized service provider to check it out.
-
After bios upgrade, kernel panics
I'm stumped. My machine won't boot after a BIOS upgrade. Both Windows and Linux are hosed.
It's not that the BIOS upgrade didn't work: upon booting, I can enter the BIOS setup and change settings, etc. Grub seems to be OK, too -- I can press 'c' when the grub menu comes up and do things there. For example, I can read files on the disk, etc. /boot/grub/menu.lst looks fine.
Most puzzling of all, I can't even boot Linux from an Arch live CD! The grub menu comes up, I select the kernel I want, and the machine freezes.
Diagnostics go by so fast on the screen I can't read them to get any further idea what's going on.
Any ideas?
-RodA risky (given the freezing conditions) but good option would be to downgrade the bios by using a bootable cd/dvd with DOS/FreeDOS.
-
Nvidia driver problem after upgrade kernel
After kernel update to 3.10.10 do not start X. I use nvidia proprietary drivers.
same thing happened to me. The maintainer should have had linux-3.10.10 depend on nvidia-325.15-5.
Instead, he probably just thought he would upload them at the same time hoping that it would be ok.
Obviously mirrors sync differently, and we both got screwed. Luckily I could still get to a VT, and upgrade after the nvidia pkg synced. -
Lost all multipath LUNs after upgrading kernel to 3.8.13-55
I need some help please....
I have the OVM repo on both my servers, I ran a yum-check update and it showed there were xen packages to upgrade to 3.3.2 and a new kernel (3.8.13-55). After applying a yum -y update, and rebooted the server into the new kernel, none of my LUNs showed up.
I ran a multipath -ll command it was only showing the internal RAID controller. Started to troubleshoot by process of elimination.
When i boot back into the 3.8.13-26.4.2 kernel, all my LUNs come back. Multi path -ll shows all the mappings and I can start my VM's up.
Tried a second time to boot into the new kernel, same problem. We are running on HP DL360p G8 servers using HP branded 2x 8GB F/C HBA's
I ran the upgrade on the second server and the same behaviour is exhibited.
Luckily we boot off of SD cards and I made a dd backup before i did any of this. So i restored back to the 3.3.1 image and performed a yum update on all components except the kernel and the OVM console now shows 3.3.2 (the VM manager was already upgraded to 3.3.2)
We are very very concerned about this.. We are in the final stages of testing this before we roll this out to production. I'm at a loss why Oracle would show a kernel upgrade when it clearly breaks something to do with multi path.
Do you have to do anything specific in Oracle VM once a kernel is replaced? I come from a vSphere backgrounds and this is all new to me. Any suggestions?After doing some probing, I think the issue is the fact the drivers for these HP Brocade 82B HBA's are more than 2 years old. If i look on HP's site, they have new firmware and drivers for these cards, however, Oracle won't support 3rd party drivers on Oracle VM. So we're kind of in a bind here, can anyone shed some light on this? I find this truly to be a horrible virtualization platform, the VM manager is atrocious and has 0 reporting features built in. Its a real pity you are forcing people to use this junk, when far more established solutions are in place (vSphere) that are robust and work and are very very reliable. This whole CPU pinning is only valid with Oracle VM is a load of BS if you ask me. Am i just supposed to sit and wait for Oracle to possibly upgrade the drivers ?
[root@prd-oravm-02 ~]# modinfo bfa
filename: /lib/modules/3.8.13-26.4.2.el6uek.x86_64/kernel/drivers/scsi/bfa/bfa.ko
version: 3.1.2.1
author: Brocade Communications Systems, Inc.
description: Brocade Fibre Channel HBA Driver fcpim
license: GPL
firmware: ct2fw-3.1.0.0.bin
firmware: ctfw-3.1.0.0.bin
firmware: cbfw-3.1.0.0.bin
srcversion: 0E58B18DCDDBAFD81911FBD
alias: pci:v00001657d00000022sv*sd*bc0Csc04i00*
alias: pci:v00001657d00000021sv*sd*bc0Csc04i00*
alias: pci:v00001657d00000014sv*sd*bc0Csc04i00*
alias: pci:v00001657d00000017sv*sd*bc*sc*i*
alias: pci:v00001657d00000013sv*sd*bc*sc*i*
depends: scsi_transport_fc
intree: Y
vermagic: 3.8.13-26.4.2.el6uek.x86_64 SMP mod_unload modversions
parm: os_name:OS name of the hba host machine (charp)
parm: os_patch:OS patch level of the hba host machine (charp)
parm: host_name:Hostname of the hba host machine (charp)
parm: num_rports:Max number of rports supported per port (physical/logical), default=1024 (int)
parm: num_ios:Max number of ioim requests, default=2000 (int)
parm: num_tms:Max number of task im requests, default=128 (int)
parm: num_fcxps:Max number of fcxp requests, default=64 (int)
parm: num_ufbufs:Max number of unsolicited frame buffers, default=64 (int)
parm: reqq_size:Max number of request queue elements, default=256 (int)
parm: rspq_size:Max number of response queue elements, default=64 (int)
parm: num_sgpgs:Number of scatter/gather pages, default=2048 (int)
parm: rport_del_timeout:Rport delete timeout, default=90 secs, Range[>0] (int)
parm: bfa_lun_queue_depth:Lun queue depth, default=32, Range[>0] (int)
parm: bfa_io_max_sge:Max io scatter/gather elements, default=255 (int)
parm: bfa_log_level:Driver log level, default=3, Range[Critical:1|Error:2|Warning:3|Info:4] (int)
parm: ioc_auto_recover:IOC auto recovery, default=1, Range[off:0|on:1] (int)
parm: bfa_linkup_delay:Link up delay, default=30 secs for boot port. Otherwise 10 secs in RHEL4 & 0 for [RHEL5, SLES10, ESX40] Range[>0] (int)
parm: msix_disable_cb:Disable Message Signaled Interrupts for Brocade-415/425/815/825 cards, default=0, Range[false:0|true:1] (int)
parm: msix_disable_ct:Disable Message Signaled Interrupts if possible for Brocade-1010/1020/804/1007/902/1741 cards, default=0, Range[false:0|true:1] (int)
parm: fdmi_enable:Enables fdmi registration, default=1, Range[false:0|true:1] (int)
parm: pcie_max_read_reqsz:PCIe max read request size, default=0 (use system setting), Range[128|256|512|1024|2048|4096] (int)
parm: bfa_debugfs_enable:Enables debugfs feature, default=1, Range[false:0|true:1] (int)
parm: max_xfer_size:default=32MB, Range[64k|128k|256k|512k|1024k|2048k] (int)
parm: max_rport_logins:Max number of logins to initiator and target rports on a port (physical/logical), default=1024 (int) -
Airportd crash after wake - kernel panics, 10.8.3 instability
I opened up my CPU from sleep and the screen flashed (that was the uh oh moment). Device woke and shortly thereafter the following occured (see crash log below). Any advice as to how to proceed would be appreciated-this does not include guiding me through resetting my PRAM, SMC, [insert generic troubleshoot]:
Thanks.
Process: airportd [6275]
Path: /usr/libexec/airportd
Identifier: airportd
Version: 832.18.1
Code Type: X86-64 (Native)
Parent Process: launchd [1]
User ID: 0
Date/Time: 2013-05-14 22:44:01.497 -0400
OS Version: Mac OS X 10.8.3 (12D78)
Report Version: 10
Crashed Thread: 3 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000000000b0
VM Regions Near 0xb0:
-->
__TEXT 00000001014e2000-0000000101521000 [ 252K] r-x/rwx SM=COW /usr/libexec/airportd
Thread 0:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff95dded16 kevent + 10
1 libdispatch.dylib 0x00007fff943d6dea _dispatch_mgr_invoke + 883
2 libdispatch.dylib 0x00007fff943d69ee _dispatch_mgr_thread + 54
Thread 1:: Dispatch queue: com.apple.root.default-overcommit-priority
0 libsystem_kernel.dylib 0x00007fff95dde566 __sigsuspend_nocancel + 10
1 libdispatch.dylib 0x00007fff943d3da1 _dispatch_sigsuspend + 28
2 libdispatch.dylib 0x00007fff943d3d85 _dispatch_sig_thread + 45
Thread 2:: Dispatch queue: com.apple.airportd.server.autojoin.q
0 com.apple.CoreFoundation 0x00007fff909df1e3 +[__NSDictionaryM __new:::::] + 435
1 com.apple.CoreFoundation 0x00007fff909de079 -[__NSDictionaryI mutableCopyWithZone:] + 409
2 airportd 0x00000001014e6224 0x1014e2000 + 16932
3 airportd 0x00000001014e46c6 0x1014e2000 + 9926
4 airportd 0x00000001014e4091 0x1014e2000 + 8337
5 airportd 0x00000001014f3537 0x1014e2000 + 70967
6 libdispatch.dylib 0x00007fff943d7f01 _dispatch_call_block_and_release + 15
7 libdispatch.dylib 0x00007fff943d40b6 _dispatch_client_callout + 8
8 libdispatch.dylib 0x00007fff943d547f _dispatch_queue_drain + 235
9 libdispatch.dylib 0x00007fff943d52f1 _dispatch_queue_invoke + 52
10 libdispatch.dylib 0x00007fff943d51c3 _dispatch_worker_thread2 + 249
11 libsystem_c.dylib 0x00007fff905f3d0b _pthread_wqthread + 404
12 libsystem_c.dylib 0x00007fff905de1d1 start_wqthread + 13
Thread 3 Crashed:: Dispatch queue: com.apple.root.default-priority
0 libc++abi.dylib 0x00007fff8f5c8f08 __dynamic_cast + 30
1 com.apple.security 0x00007fff97542330 Security::KeychainCore::ItemImpl::required(OpaqueSecKeychainItemRef*) + 48
2 com.apple.security 0x00007fff9757feda SecKeychainItemCopyAttributesAndData + 34
3 com.apple.framework.CoreWLAN 0x00007fff97043597 copyPasswordForKeychainItem + 51
4 com.apple.framework.CoreWLAN 0x00007fff970440ce copyKeychainPassword + 169
5 com.apple.framework.CoreWLAN 0x00007fff970307f4 CWKeychainCopyPassword + 185
6 airportd 0x00000001014f59d2 0x1014e2000 + 80338
7 airportd 0x00000001014f5f48 0x1014e2000 + 81736
8 airportd 0x00000001014ee557 0x1014e2000 + 50519
9 airportd 0x00000001014f0c1c 0x1014e2000 + 60444
10 airportd 0x00000001014f4a72 0x1014e2000 + 76402
11 libdispatch.dylib 0x00007fff943d7f01 _dispatch_call_block_and_release + 15
12 libdispatch.dylib 0x00007fff943d40b6 _dispatch_client_callout + 8
13 libdispatch.dylib 0x00007fff943d51fa _dispatch_worker_thread2 + 304
14 libsystem_c.dylib 0x00007fff905f3d0b _pthread_wqthread + 404
15 libsystem_c.dylib 0x00007fff905de1d1 start_wqthread + 13
Thread 4:
0 libsystem_kernel.dylib 0x00007fff95dde6d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff905f3f4c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff905f3d13 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff905de1d1 start_wqthread + 13
Thread 5:
0 libsystem_kernel.dylib 0x00007fff95dde6d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff905f3f4c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff905f3d13 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff905de1d1 start_wqthread + 13
Thread 6:
0 libsystem_kernel.dylib 0x00007fff95dde6d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff905f3f4c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff905f3d13 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff905de1d1 start_wqthread + 13
Thread 3 crashed with X86 Thread State (64-bit):
rax: 0x00000000000000c0 rbx: 0xffffffffffffffff rcx: 0xffffffffffffffff rdx: 0x00007fff7f8e0130
rdi: 0x00007fd2f241a408 rsi: 0x00007fff7f8e6500 rbp: 0x00000001017d2280 rsp: 0x00000001017d2230
r8: 0x00000001017d22ec r9: 0x00000001017d22e0 r10: 0x00007fd2f3109fc0 r11: 0x000000004646d7b7
r12: 0x00007fff7f8e0130 r13: 0x0000000000000000 r14: 0x00007fd2f241a408 r15: 0x00007fff7f8e6500
rip: 0x00007fff8f5c8f08 rfl: 0x0000000000010206 cr2: 0x00000000000000b0
Logical CPU: 6
Binary Images:
0x1014e2000 - 0x101520fff airportd (832.18.1) <CBD3B1F6-84A8-3C39-B6F9-2D8D6B477FEF> /usr/libexec/airportd
0x10153a000 - 0x101562fff libpcap.A.dylib (29) <A989E9D1-8025-310F-82B5-CD26069D633D> /usr/lib/libpcap.A.dylib
0x7fff610e2000 - 0x7fff6111693f dyld (210.2.3) <6900F2BA-DB48-3B78-B668-58FC0CF6BCB8> /usr/lib/dyld
0x7fff8e404000 - 0x7fff8e579fff com.apple.CFNetwork (596.3.3 - 596.3.3) <3739DC8D-8610-3740-80EC-43E130779CB8> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
0x7fff8e5c3000 - 0x7fff8e674fff com.apple.LaunchServices (539.7 - 539.7) <DA7C602E-5E01-31B8-925D-B45360CA089F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff8e6d6000 - 0x7fff8e6f8ff7 libxpc.dylib (140.42) <BBE558BD-5E55-35E4-89ED-1AA6B056D05A> /usr/lib/system/libxpc.dylib
0x7fff8eaab000 - 0x7fff8eaabfff libOpenScriptingUtil.dylib (148.3) <F8681222-0969-3B10-8BCE-C55A4B9C520C> /usr/lib/libOpenScriptingUtil.dylib
0x7fff8eab2000 - 0x7fff8eab3ff7 libsystem_sandbox.dylib (220.2) <6838A6FD-8626-3356-BB4F-BB4787216207> /usr/lib/system/libsystem_sandbox.dylib
0x7fff8eab4000 - 0x7fff8eacbfff com.apple.GenerationalStorage (1.1 - 132.3) <FD4A84B3-13A8-3C60-A59E-25A361447A17> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
0x7fff8eb36000 - 0x7fff8eba4fff com.apple.framework.IOKit (2.0.1 - 755.22.5) <1547DA6F-9793-30A2-8E92-7368DE84D46C> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff8ec60000 - 0x7fff8ec61ff7 libremovefile.dylib (23.2) <6763BC8E-18B8-3AD9-8FFA-B43713A7264F> /usr/lib/system/libremovefile.dylib
0x7fff8ecaf000 - 0x7fff8ecb2ff7 libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
0x7fff8ecb3000 - 0x7fff8ed1cfff libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
0x7fff8efcc000 - 0x7fff8efceff7 libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
0x7fff8f5c6000 - 0x7fff8f5ebff7 libc++abi.dylib (26) <D86169F3-9F31-377A-9AF3-DB17142052E4> /usr/lib/libc++abi.dylib
0x7fff8f683000 - 0x7fff8f685fff libquarantine.dylib (52) <4BE2E642-A14F-340A-B482-5BD2AEFD9C24> /usr/lib/system/libquarantine.dylib
0x7fff8f686000 - 0x7fff8f6a7ff7 libCRFSuite.dylib (33) <736ABE58-8DED-3289-A042-C25AF7AE5B23> /usr/lib/libCRFSuite.dylib
0x7fff8f6a8000 - 0x7fff8f6bffff com.apple.CFOpenDirectory (10.8 - 151.10) <7AD5F6E7-A745-3FF4-B813-9D064A8146EC> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff900a0000 - 0x7fff9019dfff libsqlite3.dylib (138.1) <ADE9CB98-D77D-300C-A32A-556B7440769F> /usr/lib/libsqlite3.dylib
0x7fff902df000 - 0x7fff902dffff com.apple.CoreServices (57 - 57) <9DD44CB0-C644-35C3-8F57-0B41B3EC147D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff9058f000 - 0x7fff9059eff7 libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
0x7fff905a2000 - 0x7fff905aafff liblaunch.dylib (442.26.2) <2F71CAF8-6524-329E-AC56-C506658B4C0C> /usr/lib/system/liblaunch.dylib
0x7fff905ab000 - 0x7fff905dcff7 com.apple.DictionaryServices (1.2 - 184.4) <FB0540FF-5034-3591-A28D-6887FBC220F7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff905dd000 - 0x7fff906a9ff7 libsystem_c.dylib (825.26) <4C9EB006-FE1F-3F8F-8074-DFD94CF2CE7B> /usr/lib/system/libsystem_c.dylib
0x7fff90810000 - 0x7fff90815fff libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
0x7fff90819000 - 0x7fff90878fff com.apple.AE (645.6 - 645.6) <44F403C1-660A-3543-AB9C-3902E02F936F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff908bc000 - 0x7fff90aa6ff7 com.apple.CoreFoundation (6.8 - 744.18) <A60C3C9B-3764-3291-844C-C487ACF77C2C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff90aa7000 - 0x7fff90e04ff7 com.apple.Foundation (6.8 - 945.16) <89BD68FD-72C8-35C1-94C6-3A07F097C50D> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff91337000 - 0x7fff9133cfff libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
0x7fff913f8000 - 0x7fff91400ff7 libsystem_dnssd.dylib (379.37) <616FC901-151E-38BF-B2C4-24A351C5FAAD> /usr/lib/system/libsystem_dnssd.dylib
0x7fff91401000 - 0x7fff91408fff com.apple.NetFS (5.0 - 4.0) <82E24B9A-7742-3DA3-9E99-ED267D98C05E> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff936cc000 - 0x7fff936deff7 libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
0x7fff938ad000 - 0x7fff938f9ff7 libauto.dylib (185.1) <73CDC482-16E3-3FC7-9BB4-FBA2DA44DBC2> /usr/lib/libauto.dylib
0x7fff93eaa000 - 0x7fff93f37ff7 com.apple.SearchKit (1.4.0 - 1.4.0) <C7F43889-F8BF-3CB9-AD66-11AEFCBCEDE7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff943d2000 - 0x7fff943e7ff7 libdispatch.dylib (228.23) <D26996BF-FC57-39EB-8829-F63585561E09> /usr/lib/system/libdispatch.dylib
0x7fff944b0000 - 0x7fff944bdfff libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
0x7fff944e6000 - 0x7fff944ecfff com.apple.DiskArbitration (2.5.2 - 2.5.2) <C713A35A-360E-36CE-AC0A-25C86A3F50CA> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff944ed000 - 0x7fff944f1fff libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
0x7fff944f2000 - 0x7fff94809ff7 com.apple.CoreServices.CarbonCore (1037.5 - 1037.5) <731D8F92-1C52-3613-BA01-EFEA54DADF41> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff950af000 - 0x7fff950dafff libxslt.1.dylib (11.3) <441776B8-9130-3893-956F-39C85FFA644F> /usr/lib/libxslt.1.dylib
0x7fff95186000 - 0x7fff951d7ff7 com.apple.SystemConfiguration (1.12.2 - 1.12.2) <A4341BBD-A330-3A57-8891-E9C1A286A72D> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff951d8000 - 0x7fff95257ff7 com.apple.securityfoundation (6.0 - 55115.4) <64EDD2F2-4DE2-3DE5-BE57-43D413853CF9> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x7fff95676000 - 0x7fff95677fff libDiagnosticMessagesClient.dylib (8) <8548E0DC-0D2F-30B6-B045-FE8A038E76D8> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff95684000 - 0x7fff9579c92f libobjc.A.dylib (532.2) <90D31928-F48D-3E37-874F-220A51FD9E37> /usr/lib/libobjc.A.dylib
0x7fff957f8000 - 0x7fff95847ff7 libcorecrypto.dylib (106.2) <CE0C29A3-C420-339B-ADAA-52F4683233CC> /usr/lib/system/libcorecrypto.dylib
0x7fff959c9000 - 0x7fff959d4fff libsystem_notify.dylib (98.5) <C49275CC-835A-3207-AFBA-8C01374927B6> /usr/lib/system/libsystem_notify.dylib
0x7fff95a3e000 - 0x7fff95a87fff com.apple.framework.CoreWiFi (1.2.2 - 122.12) <D237551E-0E2C-30FB-8FAA-003D8F25E819> /System/Library/Frameworks/CoreWiFi.framework/Versions/A/CoreWiFi
0x7fff95a88000 - 0x7fff95a96ff7 libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
0x7fff95ca9000 - 0x7fff95d4fff7 com.apple.CoreServices.OSServices (557.6 - 557.6) <1BDB5456-0CE9-301C-99C1-8EFD0D2BFCCD> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff95d50000 - 0x7fff95d5eff7 libkxld.dylib (2050.22.13) <4AAF0573-8632-3D06-BE32-C5675F77638D> /usr/lib/system/libkxld.dylib
0x7fff95dcc000 - 0x7fff95de7ff7 libsystem_kernel.dylib (2050.22.13) <5A961E2A-CFB8-362B-BC43-122704AEB047> /usr/lib/system/libsystem_kernel.dylib
0x7fff95f57000 - 0x7fff95f5dff7 libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
0x7fff95f73000 - 0x7fff95f79fff libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
0x7fff961c3000 - 0x7fff961d0ff7 com.apple.NetAuth (4.0 - 4.0) <F5BC7D7D-AF28-3C83-A674-DADA48FF7810> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
0x7fff964cb000 - 0x7fff964deff7 libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
0x7fff964df000 - 0x7fff9654cff7 com.apple.datadetectorscore (4.1 - 269.2) <4FD4A7CE-BB00-3AAB-B7AA-AE395D5400EC> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x7fff96826000 - 0x7fff9682aff7 com.apple.TCC (1.0 - 1) <F2F3B753-FC73-3543-8BBE-859FDBB4D6A6> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
0x7fff9682b000 - 0x7fff9682bfff libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
0x7fff9682c000 - 0x7fff96929ff7 libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
0x7fff96be6000 - 0x7fff96be7ff7 libdnsinfo.dylib (453.19) <14202FFB-C3CA-3FCC-94B0-14611BF8692D> /usr/lib/system/libdnsinfo.dylib
0x7fff96c53000 - 0x7fff96c61fff libcommonCrypto.dylib (60027) <BAAFE0C9-BB86-3CA7-88C0-E3CBA98DA06F> /usr/lib/system/libcommonCrypto.dylib
0x7fff9702a000 - 0x7fff97075fff com.apple.framework.CoreWLAN (3.0.2 - 302.12) <896D75EB-069B-3674-936E-27A81568BECB> /System/Library/Frameworks/CoreWLAN.framework/Versions/A/CoreWLAN
0x7fff972bf000 - 0x7fff972c0fff libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
0x7fff9733e000 - 0x7fff97374fff libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
0x7fff97416000 - 0x7fff9741dfff libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
0x7fff97422000 - 0x7fff976f3ff7 com.apple.security (7.0 - 55179.11) <73958084-5BBC-3597-A751-7370B0C247E5> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff97c87000 - 0x7fff97c88ff7 libSystem.B.dylib (169.3) <FF25248A-574C-32DB-952F-B948C389B2A4> /usr/lib/libSystem.B.dylib
0x7fff98150000 - 0x7fff98151fff liblangid.dylib (116) <864C409D-D56B-383E-9B44-A435A47F2346> /usr/lib/liblangid.dylib
0x7fff985c9000 - 0x7fff985f7ff7 libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
0x7fff98eae000 - 0x7fff98f16ff7 libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
0x7fff98f17000 - 0x7fff98f3fff7 com.apple.SystemConfiguration.EAP8021X (12.0.0 - 12.0) <50EAD1D3-E866-314E-B998-64D1B882A176> /System/Library/PrivateFrameworks/EAP8021X.framework/Versions/A/EAP8021X
0x7fff9a017000 - 0x7fff9a217fff libicucore.A.dylib (491.11.2) <FD6282D8-DF3F-3842-8C2E-CF478D2B9669> /usr/lib/libicucore.A.dylib
0x7fff9a4ea000 - 0x7fff9a56bfff com.apple.Metadata (10.7.0 - 707.5) <4140B1F6-7D73-33C7-B3F2-4DB349C31AE9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 4816
thread_create: 4
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=80.5M resident=35.9M(45%) swapped_out_or_unallocated=44.6M(55%)
Writable regions: Total=92.3M written=1904K(2%) resident=2440K(3%) swapped_out=0K(0%) unallocated=89.9M(97%)
REGION TYPE VIRTUAL
=========== =======
MALLOC 80.5M
MALLOC guard page 32K
Memory tag=251 8K
STACK GUARD 28K
Stack 67.6M
VM_ALLOCATE 16K
__DATA 3348K
__LINKEDIT 52.1M
__TEXT 28.3M
__UNICODE 544K
mapped file 18.3M
shared memory 12K
=========== =======
TOTAL 250.7MBack up all data.
Triple-click the line below to select it:
/Library/Keychains/System.keychain
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with an item selected. Restore the iitem from a backup that predates the issue. Reboot and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
Kernel Panic after Installing Lion
Hey guys, I have a Mid 2009 Macbook pro. I installed Lion yesterday along with 8gigs of Ram and a 128gig SSD. I have been getting kernel panics sporadically after that. Please help me out. Here's my log:
Thu Jul 21 03:29:40 2011
panic(cpu 1 caller 0xffffff80002c268d): Kernel trap at 0xffffff80004d9e40, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00000000014e3000, CR3: 0x0000000014dff000, CR4: 0x0000000000000660
RAX: 0xffffff8015a742c0, RBX: 0x000000000008b088, RCX: 0x0000000009000000, RDX: 0xffffff8013b1fdd8
RSP: 0xffffff80ff33bbd0, RBP: 0xffffff80ff33bc10, RSI: 0x000000000008b088, RDI: 0xffffff8013b1fdd8
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x000000000000000c, R11: 0x0000000000000000
R12: 0xffffff80006cacb0, R13: 0xffff0080214601f8, R14: 0xffffff8013b1f808, R15: 0xffffff8013b1fdd8
RFL: 0x0000000000010282, RIP: 0xffffff80004d9e40, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000000014e3000, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80ff33b890 : 0xffffff8000220702
0xffffff80ff33b910 : 0xffffff80002c268d
0xffffff80ff33bab0 : 0xffffff80002d7a3d
0xffffff80ff33bad0 : 0xffffff80004d9e40
0xffffff80ff33bc10 : 0xffffff80004d1482
0xffffff80ff33be20 : 0xffffff8000316b83
0xffffff80ff33be80 : 0xffffff8000303a2c
0xffffff80ff33bf60 : 0xffffff80005ca198
0xffffff80ff33bfb0 : 0xffffff80002d7f59
BSD process name corresponding to current thread: PluginProcess
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 269301107403
last loaded kext at 12176466780: com.vmware.kext.vmnet 3.0.0 (addr 0xffffff7f821d5000, size 45056)
last unloaded kext at 201340563382: com.apple.driver.AppleUSBTCKeyEventDriver 220.8 (addr 0xffffff7f81baa000, size 8192)
loaded kexts:
com.vmware.kext.vmnet 3.0.0
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
com.bresink.driver.BRESINKx86Monitoring 8.0
com.parallels.kext.prl_vnic 6.0 12090.660720
com.parallels.kext.prl_netbridge 6.0 12090.660720
com.parallels.kext.prl_usb_connect 6.0 12090.660720
com.parallels.kext.prl_hid_hook 6.0 12090.660720
com.parallels.kext.prl_hypervisor 6.0 12090.660720
com.Cycling74.driver.Soundflower 1.5.2
at.obdev.nke.LittleSnitch 2.4.0
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AGPM 100.12.40
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.1.1f11
com.apple.driver.AppleMikeyDriver 2.1.1f11
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.GeForce 7.0.2
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.driver.AppleUSBTCButtons 220.8Hi everyone!
I have this exact problem too!
Installed upgraded from Snow Leopard to Lion as soon as it came out. Everything was ok until I installed my Kingston SSDNow 128gb SSD and 2 Kingston 4GB DDR3 RAM sticks (8gigs total), I cloned my HDD onto my brand new SSD, everything worked great.... until I got my first kernel panic...
After lots of times of having to force-reboot my mac because of those kernel panics, I finally decided to do a clean install of lion. I did, and everything worked fine until, guess what?, kernel panic.
I'm starting to think that it may be my SSD or my RAM sticks that are defective but I can't actually believe that cause they are both brand new (bought them toghether 2 months ago).
So... today my mac got completely fu@#*ed up... it wouldn't even recognize my external HDD. I had to backup to a network shared drive and did a clean install (again...).
That was 6 hs ago, and now I'm posting this after a kernel panic.
I dont know what to do... did any one found a solution for this?
I'd apreciate your help very much.
Best regards,
Santiago
This are my Mac's specs:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
KINGSTON SV100S2128G:
Capacity: 128.04 GB (128,035,676,160 bytes)
Model: KINGSTON SV100S2128G
Revision: D110225a
Serial Number: 08BB10038403
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 4 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x0198
Part Number: 0x393930353432382D3035312E4130304C4620
Serial Number: 0x840CE1F7
BANK 1/DIMM0:
Size: 4 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x0198
Part Number: 0x393930353432382D3035312E4130304C4620
Serial Number: 0x840CCBF8 -
Kernel Panic after installing Mac OSX Lion
I have a late 2009, 15" Macbook Pro that I've upgraded to mountain lion about three weeks ago and when I upgraded the first time I kept getting kernel panics like no tommorrow. I used my flash drive which had lion uploaded to it to "downgrade" to lion in case this happens. I also had mountain lion on the flash drive to so I did a clean install of mountain lion through my flash drive. After that, kernel panics still seem to appear. I got frustrated and called apple support, and lets say that after many hours of testing, installing, and configuring that they just told me to simply go to an apple store, which was a two hour drive from Pine Plains, NY to Danbury, CT only to have them reenstall mountain lion (again) through a network. When I finally got it back and tested it for an hour I thought things would be fine... But lo and behold, another kernel panic appeared. I've taken the liberty to track the programs that I've installed and used during the testing as well as the kernel panic that was reoccuring.
Macbook Pro "Panic" Run test
Software installed:
Adobe Shockwave Player
Adobe Flash Player
Adobe Reader
Software Used:
Safari - Surfed the web to test system stability.
watched a youtube video to test system stability.
Terminal - Changed, created and deleted test directories to test system stabilityiTunes - Downloaded a song and played it to test system stability. Cinch - Installed and ran cinch to test system stability. iPhoto - Installed and ran iPhoto to test system stability.Notes:
10 min - system appears to be stable, changed the energy saver setting from "Better Battery Life" to "Performance".
24min - installed software (see software installed) and used Safari, Terminal, and iTunes. System still appears to be stable.
34min - switched energy settings from "Performance" to "Better Battery Life", restarted the system. System still stable.
38min - secure deleted a file, system still stable.
46min - Shut down and powered up a computer.
1 hour - Installed and ran iPhoto, and Cinch.
9 hours - installed google chrome. Surfed the net (mostly youtube.com)
10 hours - first kernel panic, during surfing!
Kernel Panic Below:
Sun Aug 19 00:42:43 2012
panic(cpu 0 caller 0xffffff801c8b7b95): Kernel trap at 0xffffff7f9d356a88, type 6=invalid opcode, registers:
CR0: 0x0000000080010033, CR2: 0x000000000778a000, CR3: 0x000000001f48c000, CR4: 0x0000000000000660
RAX: 0xffffff81052d5000, RBX: 0xffffff80302d8004, RCX: 0x0000000000100040, RDX: 0xffffff80302d8374
RSP: 0xffffff8104e23b90, RBP: 0xffffff8104e23cf0, RSI: 0x0000000000000000, RDI: 0xffffff8030000804
R8: 0x0000000000000001, R9: 0xffffff8104e23b54, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0x000000000000502d, R15: 0xffffff80302dc004
RFL: 0x0000000000010002, RIP: 0xffffff7f9d356a88, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000778a000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8104e23830 : 0xffffff801c81d5f6
0xffffff8104e238a0 : 0xffffff801c8b7b95
0xffffff8104e23a70 : 0xffffff801c8ce4ad
0xffffff8104e23a90 : 0xffffff7f9d356a88
0xffffff8104e23cf0 : 0xffffff7f9d3780b8
0xffffff8104e23e10 : 0xffffff7f9d09175d
0xffffff8104e23e40 : 0xffffff7f9cf7b9e6
0xffffff8104e23ef0 : 0xffffff801cc47078
0xffffff8104e23f30 : 0xffffff801cc45b8a
0xffffff8104e23f80 : 0xffffff801cc45cb9
0xffffff8104e23fb0 : 0xffffff801c8b2677
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9cf0a 000->0xffffff7f9d20cfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9ce6f000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f9cef6000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f9ceb3000
com.apple.nvidia.nv50hal(8.0)[9CD95A4A-FD94-349E-A4B6-FC3B74E197F5]@0xffffff7f9 d21a000->0xffffff7f9d53cfff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9cf 0a000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9ce6f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x000000001c600000
Kernel text base: 0xffffff801c800000
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 18573602043659
last loaded kext at 1644310813972: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f9ea1f000, size 229376)
last unloaded kext at 747282899652: com.apple.driver.AppleUSBTCKeyEventDriver 235.4 (addr 0xffffff7f9e4ae000, size 8192)
loaded kexts:
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.0f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.AppleMuxControl 3.2.6
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
I'll try to figure out how to read this as soon as possible, but until then I need your help to solve this problem.That panic was not caused by third-party software.
If the panic is recurrent, the possibilities are (1) a damaged OS X installation; (2) a hardware fault, which could be internal or in a wired peripheral device; and (3) an obscure bug in OS X.
You can rule out the first possibility by reinstalling the OS. Probably there will be no change. In that case, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or unless it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at leasttwo independent backups.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed. -
Help!! Kernel panics after installation!!
Hi,
I am new to Arch Linux (migrating from Fedora). I am having some problems with the installation on my Sony VAIO CW (C2D, Nvidia GT230M). At first I couldn't get past the installation of X in the Beginner's guide, but after some tweaking with conf files I finally got it to work. But after reboot, kernel panic occured. This started happening intermittently from there onwards. Then I tried to install GNOME which failed miserably as in it panics and crashes everytime system starts.
Then I tried KDE and things are much better compared to GNOME. The problem is whenever I try logging into a new KDE session, kernel panics. Only KDE Failsafe mode works (with sound). I honestly dont know what to do as I have no idea why the problem is occuring also. I plan to stay with Arch, as nouveau works much better than it used to in Fedora (3d support). Can anybody help with this issue?
Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz GenuineIntel GNU/Linux
10-nouveau.conf
Section "Device"
Identifier "n"
Driver "nouveau"
EndSection
Xorg.0.log
[ 50.605]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 50.605] X Protocol Version 11, Revision 0
[ 50.605] Build Operating System: Linux 2.6.35-ARCH x86_64
[ 50.605] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64
[ 50.605] Kernel command line: root=/dev/sda5 ro
[ 50.605] Build Date: 01 November 2010 10:29:19PM
[ 50.605]
[ 50.605] Current version of pixman: 0.20.0
[ 50.605] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 50.605] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 50.605] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 28 01:33:51 2010
[ 50.606] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 50.617] (==) No Layout section. Using the first Screen section.
[ 50.617] (==) No screen section available. Using defaults.
[ 50.617] (**) |-->Screen "Default Screen Section" (0)
[ 50.617] (**) | |-->Monitor "<default monitor>"
[ 50.617] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 50.617] (**) | |-->Device "n"
[ 50.617] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 50.617] (==) Automatically adding devices
[ 50.617] (==) Automatically enabling devices
[ 50.618] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 50.618] Entry deleted from font path.
[ 50.618] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 50.618] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 50.618] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 50.618] (II) Loader magic: 0x7d3360
[ 50.618] (II) Module ABI versions:
[ 50.618] X.Org ANSI C Emulation: 0.4
[ 50.618] X.Org Video Driver: 8.0
[ 50.618] X.Org XInput driver : 11.0
[ 50.618] X.Org Server Extension : 4.0
[ 50.619] (--) PCI:*(0:1:0:0) 10de:0a2a:104d:905e rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 50.619] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 50.619] (II) LoadModule: "extmod"
[ 50.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 50.629] (II) Module extmod: vendor="X.Org Foundation"
[ 50.629] compiled for 1.9.2, module version = 1.0.0
[ 50.629] Module class: X.Org Server Extension
[ 50.629] ABI class: X.Org Server Extension, version 4.0
[ 50.629] (II) Loading extension MIT-SCREEN-SAVER
[ 50.629] (II) Loading extension XFree86-VidModeExtension
[ 50.629] (II) Loading extension XFree86-DGA
[ 50.629] (II) Loading extension DPMS
[ 50.629] (II) Loading extension XVideo
[ 50.629] (II) Loading extension XVideo-MotionCompensation
[ 50.629] (II) Loading extension X-Resource
[ 50.629] (II) LoadModule: "dbe"
[ 50.630] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 50.637] (II) Module dbe: vendor="X.Org Foundation"
[ 50.637] compiled for 1.9.2, module version = 1.0.0
[ 50.637] Module class: X.Org Server Extension
[ 50.637] ABI class: X.Org Server Extension, version 4.0
[ 50.637] (II) Loading extension DOUBLE-BUFFER
[ 50.637] (II) LoadModule: "glx"
[ 50.637] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50.650] (II) Module glx: vendor="X.Org Foundation"
[ 50.650] compiled for 1.9.2, module version = 1.0.0
[ 50.650] ABI class: X.Org Server Extension, version 4.0
[ 50.650] (==) AIGLX enabled
[ 50.650] (II) Loading extension GLX
[ 50.651] (II) LoadModule: "record"
[ 50.651] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 50.652] (II) Module record: vendor="X.Org Foundation"
[ 50.652] compiled for 1.9.2, module version = 1.13.0
[ 50.652] Module class: X.Org Server Extension
[ 50.652] ABI class: X.Org Server Extension, version 4.0
[ 50.652] (II) Loading extension RECORD
[ 50.652] (II) LoadModule: "dri"
[ 50.652] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.661] (II) Module dri: vendor="X.Org Foundation"
[ 50.661] compiled for 1.9.2, module version = 1.0.0
[ 50.661] ABI class: X.Org Server Extension, version 4.0
[ 50.661] (II) Loading extension XFree86-DRI
[ 50.661] (II) LoadModule: "dri2"
[ 50.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 50.662] (II) Module dri2: vendor="X.Org Foundation"
[ 50.662] compiled for 1.9.2, module version = 1.2.0
[ 50.662] ABI class: X.Org Server Extension, version 4.0
[ 50.662] (II) Loading extension DRI2
[ 50.662] (II) LoadModule: "nouveau"
[ 50.662] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 50.675] (II) Module nouveau: vendor="X.Org Foundation"
[ 50.675] compiled for 1.9.0, module version = 0.0.16
[ 50.675] Module class: X.Org Video Driver
[ 50.675] ABI class: X.Org Video Driver, version 8.0
[ 50.675] (II) NOUVEAU driver
[ 50.675] (II) NOUVEAU driver for NVIDIA chipset families :
[ 50.675] RIVA TNT (NV04)
[ 50.675] RIVA TNT2 (NV05)
[ 50.675] GeForce 256 (NV10)
[ 50.675] GeForce 2 (NV11, NV15)
[ 50.675] GeForce 4MX (NV17, NV18)
[ 50.675] GeForce 3 (NV20)
[ 50.675] GeForce 4Ti (NV25, NV28)
[ 50.675] GeForce FX (NV3x)
[ 50.675] GeForce 6 (NV4x)
[ 50.675] GeForce 7 (G7x)
[ 50.675] GeForce 8 (G8x)
[ 50.675] (++) using VT number 7
[ 50.676] drmOpenDevice: node name is /dev/dri/card0
[ 50.676] drmOpenDevice: open result is 7, (OK)
[ 50.676] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 50.676] drmOpenDevice: node name is /dev/dri/card0
[ 50.676] drmOpenDevice: open result is 7, (OK)
[ 50.676] drmOpenByBusid: drmOpenMinor returns 7
[ 50.676] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 50.676] (II) [drm] nouveau interface version: 0.0.16
[ 50.676] (II) Loading sub module "dri"
[ 50.676] (II) LoadModule: "dri"
[ 50.677] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.677] (II) NOUVEAU(0): Loaded DRI module
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 50.677] drmOpenDevice: node name is /dev/dri/card0
[ 50.677] drmOpenDevice: open result is 8, (OK)
[ 50.677] drmOpenByBusid: drmOpenMinor returns 8
[ 50.677] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 50.677] (II) [drm] DRM interface version 1.4
[ 50.677] (II) [drm] DRM open master succeeded.
[ 50.677] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5"
[ 50.677] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 50.677] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 50.677] (==) NOUVEAU(0): RGB weight 888
[ 50.677] (==) NOUVEAU(0): Default visual is TrueColor
[ 50.677] (==) NOUVEAU(0): Using HW cursor
[ 50.696] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 50.794] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 50.803] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 50.804] (II) NOUVEAU(0): EDID for output LVDS-1
[ 50.804] (II) NOUVEAU(0): Manufacturer: SNY Model: 5fa Serial#: 0
[ 50.804] (II) NOUVEAU(0): Year: 2002 Week: 45
[ 50.804] (II) NOUVEAU(0): EDID Version: 1.4
[ 50.804] (II) NOUVEAU(0): Digital Display Input
[ 50.804] (II) NOUVEAU(0): 6 bits per channel
[ 50.804] (II) NOUVEAU(0): Digital interface is undefined
[ 50.804] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 50.804] (II) NOUVEAU(0): Gamma: 1.00
[ 50.804] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 50.804] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 50.804] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 50.804] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 50.804] (II) NOUVEAU(0): redX: 0.600 redY: 0.342 greenX: 0.295 greenY: 0.570
[ 50.804] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.111 whiteX: 0.312 whiteY: 0.328
[ 50.804] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 50.804] (II) NOUVEAU(0): Supported detailed timing:
[ 50.804] (II) NOUVEAU(0): clock: 72.0 MHz Image Size: 309 x 174 mm
[ 50.804] (II) NOUVEAU(0): h_active: 1366 h_sync: 1424 h_sync_end 1482 h_blank_end 1540 h_border: 0
[ 50.804] (II) NOUVEAU(0): v_active: 768 v_sync: 772 v_sync_end 776 v_blanking: 780 v_border: 0
[ 50.804] (II) NOUVEAU(0): Monitor name: Nvidia Defaul
[ 50.804] (II) NOUVEAU(0): Monitor name: t Flat Panel
[ 50.804] (II) NOUVEAU(0): Ranges: V min: 0 V max: 61 Hz, H min: 29 H max: 47 kHz, PixClock max 85 MHz
[ 50.804] (II) NOUVEAU(0): EDID (in hex):
[ 50.804] (II) NOUVEAU(0): 00ffffffffffff004dd9fa0500000000
[ 50.804] (II) NOUVEAU(0): 2d0c0104901f1100eaa8e099574b9225
[ 50.804] (II) NOUVEAU(0): 1c505400000001010101010101010101
[ 50.804] (II) NOUVEAU(0): 010101010101201c56ae50000c303a3a
[ 50.804] (II) NOUVEAU(0): 440035ae10000018000000fc004e7669
[ 50.804] (II) NOUVEAU(0): 6469612044656661756c000000fc0074
[ 50.804] (II) NOUVEAU(0): 20466c61742050616e656c00000000fd
[ 50.804] (II) NOUVEAU(0): 00003d1d2f0800002020202020000003
[ 50.804] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
[ 50.804] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 50.804] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 50.804] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.804] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 50.804] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 50.903] (II) NOUVEAU(0): EDID for output VGA-1
[ 50.912] (II) NOUVEAU(0): EDID for output HDMI-1
[ 50.912] (II) NOUVEAU(0): Output LVDS-1 connected
[ 50.912] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 50.912] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 50.912] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 50.912] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
[ 50.912] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 50.912] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 1376)
[ 50.912] (**) NOUVEAU(0): Driver mode "1366x768": 72.0 MHz (scaled from 0.0 MHz), 46.8 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 50.912] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 50.912] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 50.912] (**) NOUVEAU(0): Display dimensions: (310, 170) mm
[ 50.912] (**) NOUVEAU(0): DPI set to (111, 114)
[ 50.912] (II) Loading sub module "wfb"
[ 50.912] (II) LoadModule: "wfb"
[ 50.912] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 50.972] (II) Module wfb: vendor="X.Org Foundation"
[ 50.972] compiled for 1.9.2, module version = 1.0.0
[ 50.972] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.972] (II) Loading sub module "fb"
[ 50.972] (II) LoadModule: "fb"
[ 50.972] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 50.992] (II) Module fb: vendor="X.Org Foundation"
[ 50.992] compiled for 1.9.2, module version = 1.0.0
[ 50.992] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.992] (II) Loading sub module "exa"
[ 50.992] (II) LoadModule: "exa"
[ 50.992] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 50.993] (II) Module exa: vendor="X.Org Foundation"
[ 50.993] compiled for 1.9.2, module version = 2.5.0
[ 50.993] ABI class: X.Org Video Driver, version 8.0
[ 50.993] (II) Loading sub module "shadowfb"
[ 50.993] (II) LoadModule: "shadowfb"
[ 50.994] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 50.994] (II) Module shadowfb: vendor="X.Org Foundation"
[ 50.994] compiled for 1.9.2, module version = 1.0.0
[ 50.994] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.994] (--) Depth 24 pixmap format is 32 bpp
[ 50.999] (II) NOUVEAU(0): Opened GPU channel 2
[ 50.999] (II) NOUVEAU(0): [DRI2] Setup complete
[ 50.999] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 50.999] (II) NOUVEAU(0): GART: 512MiB available
[ 51.001] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 51.027] (II) EXA(0): Driver allocated offscreen pixmaps
[ 51.027] (II) EXA(0): Driver registered support for the following operations:
[ 51.027] (II) Solid
[ 51.027] (II) Copy
[ 51.027] (II) Composite (RENDER acceleration)
[ 51.027] (II) UploadToScreen
[ 51.027] (II) DownloadFromScreen
[ 51.027] (==) NOUVEAU(0): Backing store disabled
[ 51.027] (==) NOUVEAU(0): Silken mouse enabled
[ 51.029] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 51.029] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 51.029] (==) NOUVEAU(0): DPMS enabled
[ 51.029] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 51.029] (--) RandR disabled
[ 51.029] (II) Initializing built-in extension Generic Event Extension
[ 51.029] (II) Initializing built-in extension SHAPE
[ 51.029] (II) Initializing built-in extension MIT-SHM
[ 51.029] (II) Initializing built-in extension XInputExtension
[ 51.029] (II) Initializing built-in extension XTEST
[ 51.029] (II) Initializing built-in extension BIG-REQUESTS
[ 51.029] (II) Initializing built-in extension SYNC
[ 51.029] (II) Initializing built-in extension XKEYBOARD
[ 51.029] (II) Initializing built-in extension XC-MISC
[ 51.029] (II) Initializing built-in extension SECURITY
[ 51.029] (II) Initializing built-in extension XINERAMA
[ 51.029] (II) Initializing built-in extension XFIXES
[ 51.029] (II) Initializing built-in extension RENDER
[ 51.029] (II) Initializing built-in extension RANDR
[ 51.029] (II) Initializing built-in extension COMPOSITE
[ 51.029] (II) Initializing built-in extension DAMAGE
[ 51.225] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 51.225] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 51.225] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 51.225] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 51.225] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
[ 51.225] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 51.227] (II) NOUVEAU(0): NVEnterVT is called.
[ 51.245] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
[ 51.245] resize called 1366 768
[ 51.660] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event5)
[ 51.660] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 51.660] (II) LoadModule: "evdev"
[ 51.660] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 51.676] (II) Module evdev: vendor="X.Org Foundation"
[ 51.676] compiled for 1.9.0, module version = 2.5.0
[ 51.676] Module class: X.Org XInput Driver
[ 51.676] ABI class: X.Org XInput driver, version 11.0
[ 51.676] (**) Sony Vaio Keys: always reports core events
[ 51.676] (**) Sony Vaio Keys: Device: "/dev/input/event5"
[ 51.700] (--) Sony Vaio Keys: Found keys
[ 51.700] (II) Sony Vaio Keys: Configuring as keyboard
[ 51.700] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[ 51.700] (**) Option "xkb_rules" "evdev"
[ 51.700] (**) Option "xkb_model" "evdev"
[ 51.700] (**) Option "xkb_layout" "us"
[ 51.723] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 51.723] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 51.723] (**) Video Bus: always reports core events
[ 51.723] (**) Video Bus: Device: "/dev/input/event4"
[ 51.726] (--) Video Bus: Found keys
[ 51.726] (II) Video Bus: Configuring as keyboard
[ 51.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 51.726] (**) Option "xkb_rules" "evdev"
[ 51.726] (**) Option "xkb_model" "evdev"
[ 51.726] (**) Option "xkb_layout" "us"
[ 51.743] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 51.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 51.743] (**) Power Button: always reports core events
[ 51.743] (**) Power Button: Device: "/dev/input/event2"
[ 51.756] (--) Power Button: Found keys
[ 51.756] (II) Power Button: Configuring as keyboard
[ 51.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 51.756] (**) Option "xkb_rules" "evdev"
[ 51.756] (**) Option "xkb_model" "evdev"
[ 51.756] (**) Option "xkb_layout" "us"
[ 51.757] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 51.757] (II) No input driver/identifier specified (ignoring)
[ 51.760] (II) config/udev: Adding input device UVC Camera (05ca:18b5) (/dev/input/event7)
[ 51.760] (**) UVC Camera (05ca:18b5): Applying InputClass "evdev keyboard catchall"
[ 51.760] (**) UVC Camera (05ca:18b5): always reports core events
[ 51.760] (**) UVC Camera (05ca:18b5): Device: "/dev/input/event7"
[ 51.783] (--) UVC Camera (05ca:18b5): Found keys
[ 51.783] (II) UVC Camera (05ca:18b5): Configuring as keyboard
[ 51.783] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b5)" (type: KEYBOARD)
[ 51.783] (**) Option "xkb_rules" "evdev"
[ 51.783] (**) Option "xkb_model" "evdev"
[ 51.783] (**) Option "xkb_layout" "us"
[ 51.784] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 51.784] (II) No input driver/identifier specified (ignoring)
[ 51.786] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 51.786] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 51.786] (**) Logitech USB Receiver: always reports core events
[ 51.786] (**) Logitech USB Receiver: Device: "/dev/input/event10"
[ 51.800] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 51.800] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 51.800] (--) Logitech USB Receiver: Found relative axes
[ 51.800] (--) Logitech USB Receiver: Found x and y relative axes
[ 51.800] (II) Logitech USB Receiver: Configuring as mouse
[ 51.800] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 51.800] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.800] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 51.800] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 51.800] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 51.800] (II) Logitech USB Receiver: initialized for relative axes.
[ 51.800] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
[ 51.800] (II) No input driver/identifier specified (ignoring)
[ 51.801] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 51.801] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 51.801] (**) Logitech USB Receiver: always reports core events
[ 51.801] (**) Logitech USB Receiver: Device: "/dev/input/event11"
[ 51.816] (--) Logitech USB Receiver: Found 1 mouse buttons
[ 51.816] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 51.816] (--) Logitech USB Receiver: Found relative axes
[ 51.816] (--) Logitech USB Receiver: Found absolute axes
[ 51.816] (--) Logitech USB Receiver: Found keys
[ 51.816] (II) Logitech USB Receiver: Configuring as mouse
[ 51.816] (II) Logitech USB Receiver: Configuring as keyboard
[ 51.816] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 51.816] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.816] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 51.816] (**) Option "xkb_rules" "evdev"
[ 51.816] (**) Option "xkb_model" "evdev"
[ 51.816] (**) Option "xkb_layout" "us"
[ 51.816] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 51.817] (II) Logitech USB Receiver: initialized for absolute axes.
[ 51.821] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 51.821] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 51.821] (**) AT Translated Set 2 keyboard: always reports core events
[ 51.821] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 51.843] (--) AT Translated Set 2 keyboard: Found keys
[ 51.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 51.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 51.843] (**) Option "xkb_rules" "evdev"
[ 51.843] (**) Option "xkb_model" "evdev"
[ 51.843] (**) Option "xkb_layout" "us"
[ 51.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 51.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 51.843] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 51.844] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event8"
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 51.856] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 51.856] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 51.856] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 51.856] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 51.857] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 51.857] (II) No input driver/identifier specified (ignoring)
[ 51.857] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 51.857] (II) No input driver/identifier specified (ignoring)
[ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event6)
[ 51.858] (II) No input driver/identifier specified (ignoring)
[ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 51.858] (II) No input driver/identifier specified (ignoring)
[ 80.420] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
[ 80.420] (II) NOUVEAU(0): Using hsync ranges from config file
[ 80.420] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 80.420] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 80.420] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
dmesg.log
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.841 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.25 BogoMIPS (lpj=8422803)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10111.72 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
reserve RAM buffer: 00000000be000000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x0800-0x0803] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290907981.066:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-28 01:33:02 UTC (1290907982)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226256
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226255
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226252
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226251
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226241
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226214
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226213
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226212
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226211
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226210
EXT4-fs (sda5): 10 orphan inodes deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[958]: starting version 164
fuse init (API version 7.15)
iTCO_vendor_support: vendor-support=0
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (55 C)
ACPI: Invalid active0 threshold
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (55 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
input: PC Speaker as /devices/platform/pcspkr/input/input3
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2:I tried another fresh install to see if me installing GNOME before messed up anything. The same problem persists, I made another fresh install. I only did a net install with Arch Linux core and haven't yet installed xorg or anything yet (havent even synced pacman yet). Weirdly nouveau is already loaded, this is the output of dmesg,
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2527.164 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.92 BogoMIPS (lpj=8423880)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10112.47 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
pci 0000:04:00.4: supports D1 D2
pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
reserve RAM buffer: 00000000be000000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x0800-0x0803] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1756k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290893788.056:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-11-27 21:36:28 UTC (1290893788)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[949]: starting version 164
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sony-laptop: Sony Notebook Control Driver v0.6.
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input1
ACPI: AC Adapter [ADP1] (on-line)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (56 C)
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input2
ACPI: Invalid active0 threshold
ACPI: acpi_idle registered with cpuidle
input: Sony Vaio Jogdial as /devices/virtual/input/input3
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (56 C)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Switching to clocksource hpet
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.28
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
ACPI: Video Device [NGFX] (multi-head: yes rom: no post: no)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
usb 1-2: new high speed USB device using ehci_hcd and address 2
firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:04:00.3: setting latency timer to 64
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io 0xe000-0xe01f] conflicts with ACPI region SMI1 [io 0x0800-0xffff0803 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
usb 2-1: new high speed USB device using ehci_hcd and address 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.4: setting latency timer to 64
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
firewire_core: created device fw0: GUID 080046030321aebd, S400
hda_codec: ALC262: SKU not ready 0x411111f0
hda_codec: ALC262: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 7-1: new full speed USB device using uhci_hcd and address 2
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
phy0: Selected rate control algorithm 'iwl-agn-rs'
usbcore: registered new interface driver hiddev
usb 8-1: new full speed USB device using uhci_hcd and address 2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
scsi 4:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
[drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
[drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[TTM] Zone kernel: Available graphics memory: 2011272 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff88013bfac400
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
Adding 2803304k swap on /dev/sda6. Priority:-1 extents:1 across:2803304k
wlan0: authenticate with 94:44:52:78:c1:98 (try 1)
wlan0: authenticated
wlan0: associate with 94:44:52:78:c1:98 (try 1)
wlan0: RX AssocResp from 94:44:52:78:c1:98 (capab=0x411 status=0 aid=1)
wlan0: associated
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BE000000 mask FFE000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bdea7000 (usable)
modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
modified: 00000000bdf39000 - 00000000be000000 (usable)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fd690] fd690
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 18000-1e000
RAMDISK: 37e39000 - 37ff0000
ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: FACS 00000000bdf19e40 00040
ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bdea7
0: 0x000bdf39 -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040121
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759718 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [19300 - 19aff]
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:22000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
early_res array is doubled to 128 at [19b00 - 1aaff]
pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
Kernel command line: root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (69 early reservations)
#1 [0001000000 - 00017f99a8] TEXT DATA BSS
#2 [0037e39000 - 0037ff0000] RAMDISK
#3 [00017fa000 - 00017fa1f8] BRK
#4 [00000fd6a0 - 0000100000] BIOS reserved
#5 [00000fd690 - 00000fd6a0] MP-table mpf
#6 [000009bc00 - 00000fd410] BIOS reserved
#7 [00000fd624 - 00000fd690] BIOS reserved
#8 [00000fd410 - 00000fd624] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00017fa200 - 00017fb200] BOOTMEM
#14 [0000019000 - 0000019300] BOOTMEM
#15 [0001ffc000 - 0001ffd000] BOOTMEM
#16 [0001ffd000 - 0001ffe000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00017fb200 - 0001813200] BOOTMEM
#19 [0001813200 - 000182b200] BOOTMEM
#20 [000182b200 - 0001843200] BOOTMEM
#21 [0001844000 - 0001845000] BOOTMEM
#22 [00017f99c0 - 00017f9a01] BOOTMEM
#23 [00017f9a40 - 00017f9a83] BOOTMEM
#24 [00017f9ac0 - 00017f9ee8] BOOTMEM
#25 [00017f9f00 - 00017f9f68] BOOTMEM
#26 [00017f9f80 - 00017f9fe8] BOOTMEM
#27 [0001843200 - 0001843268] BOOTMEM
#28 [0001843280 - 00018432e8] BOOTMEM
#29 [0001843300 - 0001843368] BOOTMEM
#30 [0001843380 - 00018433e8] BOOTMEM
#31 [0001843400 - 0001843468] BOOTMEM
#32 [0001843480 - 00018434e8] BOOTMEM
#33 [0001843500 - 0001843568] BOOTMEM
#34 [0001843580 - 00018435e8] BOOTMEM
#35 [0001843600 - 0001843668] BOOTMEM
#36 [0001843680 - 00018436e8] BOOTMEM
#37 [0001843700 - 0001843768] BOOTMEM
#38 [0001843780 - 00018437e8] BOOTMEM
#39 [0001843800 - 0001843868] BOOTMEM
#40 [0001843880 - 00018438e8] BOOTMEM
#41 [0001843900 - 0001843968] BOOTMEM
#42 [0001843980 - 00018439e8] BOOTMEM
#43 [0001843a00 - 0001843a20] BOOTMEM
#44 [0001843a40 - 0001843a60] BOOTMEM
#45 [0001843a80 - 0001843aa0] BOOTMEM
#46 [0001843ac0 - 0001843ad2] BOOTMEM
#47 [0001843b00 - 0001843b12] BOOTMEM
#48 [0001a00000 - 0001a1c000] BOOTMEM
#49 [0001a80000 - 0001a9c000] BOOTMEM
#50 [0001b00000 - 0001b1c000] BOOTMEM
#51 [0001b80000 - 0001b9c000] BOOTMEM
#52 [0001843b40 - 0001843b48] BOOTMEM
#53 [0001843b80 - 0001843b88] BOOTMEM
#54 [0001843bc0 - 0001843bd0] BOOTMEM
#55 [0001843c00 - 0001843c20] BOOTMEM
#56 [0001843c40 - 0001843d70] BOOTMEM
#57 [0001843d80 - 0001843dd0] BOOTMEM
#58 [0001843e00 - 0001843e50] BOOTMEM
#59 [0001845000 - 000184d000] BOOTMEM
#60 [0001b9c000 - 0001f9c000] BOOTMEM
#61 [0005800000 - 0005a00000] BOOTMEM
#62 [0001843e80 - 0001843e88] BOOTMEM
#63 [0001843ec0 - 0001843ec8] BOOTMEM
#64 [000184d000 - 000184d240] BOOTMEM
#65 [0005a00000 - 0009a00000] BOOTMEM
#66 [000184d240 - 000186d240] BOOTMEM
#67 [000186d240 - 00018ad240] BOOTMEM
#68 [000001ab00 - 0000022b00] BOOTMEM
Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 2527.035 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.65 BogoMIPS (lpj=8423450)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10112.21 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791 -
Kernel panic on first boot after 10.6.8 update
Hi,
Here are the fact:
1) I systematically get a kernel panic on first boot after an attempt to update to 10.6.8 (was able to revert to 10.6.7 using Time Machine; now I'm running my tests on a clone). While doing the update, there are NO USB connexion to my laptop, nor ethernet connexion. Only the power cable.
2) I DO NOT use the software Hands Off which is known to cause such an issue
3) I've tested this on two different hard drive (with a clone of my system)
4) I disabled all third app on startup just to be sure this wasn't a conflict problem
5) After a kernel panic, I'm always able to boot in safe mode
6) I did try both the normal update and the combo update (same result)
Now I'm kinda stuck. The next test I'm thinking performing is to update while in safe mode. But I don't know if it will help.
And yes, my permissions are all fine. Any idea how to troubleshoot this? I believe I need to be in 10.6.8 in order to update to Lion?
Many thanks in advance!
ParneixHi,
Sorry about that. Below you'll find the log of my latest kernel panic.
I did follow instructions suggested by user "ds store". The only "kext" file that I've got (by running the commands in the Terminal) was related to the software LittleSnitch. I downloaded it again in order to run the uninstaller. I'll try again to update to 10.6.8 under those conditions and report here.
Mon Jul 4 11:00:32 2011
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x57cf1b5a, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x096b8100, ECX: 0x01500000, EDX: 0x00000001
CR2: 0x00000000, EBP: 0x57dd3df8, ESI: 0x00000001, EDI: 0x096b8100
EFL: 0x00010206, EIP: 0x57cf1b5a, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x57dd3be8 : 0x21b837 (0x5dd7fc 0x57dd3c1c 0x223ce1 0x0)
0x57dd3c38 : 0x2abf6a (0x59e3d0 0x57cf1b5a 0xe 0x59e59a)
0x57dd3d18 : 0x2a1a78 (0x57dd3d30 0x10001 0x57dd3df8 0x57cf1b5a)
0x57dd3d28 : 0x57cf1b5a (0xe 0x9790048 0x9790010 0x10)
0x57dd3df8 : 0x57cf1951 (0x96b8100 0x57cf1f64 0x57cf1f5c 0x7d22fc0)
0x57dd3e18 : 0x543f60 (0x96b8100 0x6c03f00 0x1 0x506b76)
0x57dd3e78 : 0x542137 (0x6c03f00 0x96b8100 0x7d28a00 0x9791da0)
0x57dd3f28 : 0x5426e9 (0x6c03f00 0x7d20340 0x0 0x516766)
0x57dd3f78 : 0x5443d5 (0x6c03f00 0x8 0x57dd3fac 0x1)
0x57dd3fc8 : 0x2a179c (0x9773aa0 0x0 0x2a17ab 0x7c1b000)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.CHUDKernLib(3)@0x57cf0000->0x57cf3fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 54454580752
unloaded kexts:
(none)
loaded kexts:
com.Cycling74.driver.Soundflower 1.5.1 - last loaded 54075922238
com.Logitech.Control Center.HID Driver 3.2.0
at.obdev.nke.LittleSnitch 2.2.05
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.CHUDUtils 3
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.iokit.CHUDProf 3
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AirPortBrcm43xx 423.91.27
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.nvenet 2.0.17
com.apple.driver.AppleBacklight 170.0.46
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.GeForce 6.3.6
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBTCKeyEventDriver 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.iokit.KLog 2.4.5
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f13
com.apple.iokit.CHUDKernLib 3
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.nvidia.nv50hal 6.3.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.AppleProfileFamily 41
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Maybe you are looking for
-
Delivery based on qty specified in delivery schedule in Scheduling Agreemnt
Hi, We have a scenario where we need to create delivery based on the quantities entered in the delivery schedule in Scheduling Agreement, eg. on 10.11.2011 qty to be delivered is 10 on 15.11.2011 qty to be delivered is 20 We have sufficient stock and
-
OSX 10.5 Does not Recognize Login Password- Please Help!! This is insane!!
Ok, so this problem is incredibly annoying and has got me perplexed. I recently re-installed Mac OSX 10.5 for various reasons.I am running a Macbook Pro that is 2 years old apprx. I did the following steps: 1. Booted from Install DVD (authentic) 2. E
-
Trying to get ITunes Match to work on my phone.
-
POP server rejected password message??? What happened?
I get this error message: The POP server "pop-server.roadrunner.com" rejected the password for user "[email protected]" Please re-enter your password, or cancel. I just got it this evening and my mail won't accept my password. I tried to access my ma
-
Getting error while mapping HL7 message to Backend message
Hi all, can anybody help me in this regard, i am doing mapping between HL7 message fields and backend fields and here HL7 message is target message and i am getting error when i tested my mapping. error is: " min != max " why this error is comming? i