AIR 17 iOS - Unable to enumerate devices.

Hi,
with the latest AIR 17 SDK I'm getting a "Unable to enumerate devices" error with adt.
AIR version 16 Build 283 actually works fine.
Windows 7 64-Bit
iTunes 12.1.1.4

i am the same problem.. Air 16 is work. But. Latest itunes with beta 17 is not find device
win 7 64bit.sp1...... Flash cc 14.2.0.20 ..... Air beta 17.0.0.123......iTunes 12.1.1.4.....ipad air 2 md796kh/a iOS 8.1.3
and display list
and make button ........error...... not found iTunes mobile device library...but display device

Similar Messages

Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)

uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Unable to enumerate USB device on port 1

I can't use my Newman Mp3 player in archlinux.And I googled,but I still don't know how to do
uname -a
Linux foolfrog 2.6.28-ARCH #1 SMP PREEMPT Sun Mar 8 10:18:28 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
dmesg
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 2-1: new high speed USB device using ehci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access Newman Mp3 Player 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] 2013696 512-byte hardware sectors: (1.03 GB/983 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 06 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 2013696 512-byte hardware sectors: (1.03 GB/983 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 06 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:1: Direct-Access Newman USB SD 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:1: [sdc] Very big device. Trying to use READ CAPACITY(16).
usb 2-1: reset high speed USB device using ehci_hcd and address 3
usb 2-1: reset high speed USB device using ehci_hcd and address 3
sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 8
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
sd 4:0:0:1: [sdc] READ CAPACITY(16) failed
sd 4:0:0:1: [sdc] <6>sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
Result: hostbyte=0x07 driverbyte=0x00
sd 4:0:0:1: [sdc] Use 0xffffffff as device size
sd 4:0:0:1: [sdc] Sector size 0 reported, assuming 512.
sd 4:0:0:1: [sdc] 4294967296 512-byte hardware sectors: (2.19 TB/2.00 TiB)
usb 2-1: USB disconnect, address 3
sd 4:0:0:1: [sdc] Write Protect is off
sd 4:0:0:1: [sdc] Mode Sense: 00 00 00 00
sd 4:0:0:1: [sdc] Assuming drive cache: write through
sd 4:0:0:1: [sdc] READ CAPACITY failed
sd 4:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:1: [sdc] Sense not available.
sd 4:0:0:1: [sdc] Write Protect is off
sd 4:0:0:1: [sdc] Mode Sense: 00 00 00 00
sd 4:0:0:1: [sdc] Assuming drive cache: write through
sd 4:0:0:1: [sdc] READ CAPACITY failed
sd 4:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:1: [sdc] Sense not available.
sd 4:0:0:1: [sdc] Write Protect is off
sd 4:0:0:1: [sdc] Mode Sense: 00 00 00 00
sd 4:0:0:1: [sdc] Assuming drive cache: write through
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg3 type 0
usb-storage: device scan complete
hub 6-0:1.0: unable to enumerate USB device on port 1
I can use my MP3 player in winxp,but can't use it int Vista,and Ubuntu also can't use it.Could you help me?

I've been having the same problem with a usb stick of mine, the same error - unable to enumerate USB device. I figure explaining my experiences here may help someone else trying to figure this out.
This seems to be hardware related, unfortunately. I don't know if anyone can correct me. I have two laptops, one old one new. Both use 2.6.29. This one usb stick I have just wont work on the old laptop, regardless of kernel version or distribution. Other usb mass storage devices work.
I suspect that this is a combination between a kernel bug and hardware issues. All google searches on this error seem to indicate that the only way people fixed this was through replacement hardware.
I know that the usb flash drive I'm using has a hidden second volume on it. A 1GB read writeable volume, and a 4MB volume that is uneraseable, includes a pdf document that came with it. This is not a second partition, the OS sees it as a virtual CDROM drive. (I got the stick for free at a conference.) I don't know how this is implemented in hardware, but on other systems (on mac/windows/linux), a second volume appears after 10 seconds of insertion. I suspect this quirk is what prevents me from using this as a usb boot stick too.
My guess is that the usb device does not follow specification exactly, and borks on certain OS/hardware combinations. I would call my usb stick broken, and it only manifests itself on some hardware. The newman mp3 player may be similar, not following the usb specs 100%. As you said, it won't work in Vista either.
Do you have a different usb mass storage device that you can try? Plug in a hard disk, a thumb drive, a different mp3 player, see if it works right away. It makes me sad when hardware doesn't work on Linux, but sometimes that means a trip to ebay and newegg. I'm going to be doing that with my thumb drive.

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I've just seen this message for the first time and it's showing on 10 devices.
What I really love about Apple Configurator is the copious amount of context driven help offered to you.
"Unable to send ClearPasscode command to device.
The device was disconnected.
Check the USB connection to the device."

AIR for iOS device compatibility

When I tried to test a game I have been making in Flash on my iPod Touches (I tried it on 1st and 2nd generation ones), iTunes tells me that it is not compatible with either iPods when I try to sync the devices. However, a few weeks ago, I got a simple "Hello World"-type app I compiled with AIR for iOS to work on the 2nd gen iPod Touch, but when I tried it again today, I had the same problem as I did with my game.
It doesn't make sense that an AIR for iOS app would work one time and not another, so I have serious doubts that it is because they are incompatible with earlier iOS devices. I thought that I followed all the steps listed in order to test the apps on my devices, but there is certainly a chance that I did something wrong. Has anyone else had this problem? Does this mean that I am setting up my certificates incorrectly or doing something else wrong?

Multitouch.inputMode = MultitouchInputMode.GESTURE;
stage.addEventListener(TransformGestureEvent.GESTURE_ZOOM, f);
function f(event:TransformGestureEvent):void{
mc.scaleX *= event.scaleX;
mc.scaleY *= event.scaleY;

Air for iOS, why isn't the setting for device being remembered?

in flash CC with air3.7 and air3.8, everytime i open the general tab in the air for ios settings, the device is marked as iphone and ipad. i change it to iphone only, close the settings, save the file. when i open the settings again, i have to click on the general tab and the device is set back to iphone and ipad.
i consider this a bug. this has never happened in any other version of air. i had to reject an apple binary when i noticed it was set to be a universal app, which it isn't, and had i not caught the error, i would've been waiting only to be rejected by apple...
how can this be fixed? thanks

iOS 7 apparently requires at least 512MB of RAM. The fourth generation iPod touch only has 256MB, and therefore won't get it.
(89510)

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any su

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)

Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How can i activate Bluetooth on my Ipad Air with iOS 8.2 ?

Hello!
My first problem is my bad English.... :-(
My second problem is with Bluetooth on my Ipad.
I can't activate the Bluetooth function on my Ipad Air with iOS 8.2.
At Settings>Bluetooth there isn't a activate or YES/NO button.
It allways shows a wait symbol (little turning circle)
Do you have you any tipps for me?
Best regards
Hostie64

You can try the standard troubleshooting steps in this order:
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
See here For more details on restore: https://support.apple.com/en-us/HT201252
If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

How to record a time-limited video with Adobe AIR for iOS

I am trying to record a time-limited video with Adobe AIR for iOS.
For example, I want to implement the following function. Start a one-minute timer before launching CameraUI to record video. When the timeout event happens after one minute, stop recording video, close the CameraUI view and obtain the video data so far.
I have several questions related to that.
1. How to stop recording video from outside the CameraUI view(in this case, from the timeout event handler) and then close the CemeraUI view? As far as I know, to close the CameraUI view, the only way is to press the [Use Video] button or the [Cancel] button from inside the CameraUI view. Is it possible to close it from outside?
2. Even if the first problem mentioned above is solved, then how can I get the video data so far(in this case, the video data before the timeout). I know that normally we can get a MediaPromise object from MediaEvent parameter of the complete handler, and read the video data from the MediaPromise object. But obviously in this case, we can not access the MediaPromise object just because the complete handler itself will not be executed since the [Use Video] button is not pressed.
3. Is it possible to add a stopwatch to show possible remaining recording time when CameraUI view is open? It seems that the CameraUI automatically uses the full screen of iOS device(in my case, iPad) and there is no extra space to show the stopwatch.
Are there any solutions or workarounds about the three problem above? I really appreciate it if anyone has any idea about this. Thanks in advance.

You'd have more control by using the Camera object, showing the camera on a video object inside a Sprite, and capturing that. Then you could put whatever graphics alongside it on the stage.. I've used FlashyWrappers in a test to capture the video to the library. It took some work, but the test worked well...
Flash/AIR record videos of your apps and games: Rainbow Creatures

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

How to make an air for ios enterprise distribution Flash CS5.5?

Hi, There seems to be only:
Quick publishing for device testing
Quick publishing for device debugging
Deployment - Ad hoc
Deploymnet - Apple App Store
How does one do Deployment for in-house Enterprise Apps from Flash CS5.5 with AIR for iOS?
Thanks!

maweibezahn,
The plist in step 2 is created so you can download the app onto the device. This file stands alone, and does NOT need to be included in the app package, but it does need to reside in the same spot on the web server. Below is an example plist file for an app. You then access the following link from mobile safari to install:
<a href="itms-services://?action=download-manifest&url=http://www.myserver.com/myAppPlist.plist">Tap Here to Install myApp On Your iPhone</a>
----------myAppPlist.plist------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>items</key>
          <array>
                              <dict>
                                        <key>assets</key>
                                        <array>
                                                  <dict>
                                                            <key>kind</key>
                                                            <string>software-package</string>
                                                            <key>url</key>
                                                            <string>http://www.myserver.com/myApp.ipa</string>
                                                  </dict>
                                        </array>
                                        <key>metadata</key>
                                                  <dict>
                                                            <key>bundle-identifier</key>
                                                            <string>com.myServer.myApp</string>
                                                            <key>bundle-version</key>
                                                            <string>1.0.0</string>
                                                            <key>kind</key>
                                                            <string>software</string>
                                                            <key>title</key>
                                                            <string>My App Name</string>
                                                  </dict>
                              </dict>
          </array>
</dict>
</plist>

AIR for iOS app works perfectly in emulator, not at all on an actual iPad

I'm new to mobile development, so I'm hoping I am doing some simple wrong, like a wrong checked box or something.
I have an app that I have written for iPad. It's fully functioning when I run it through the emulator (I have to change it to Flash 10.1 and use Device Emulator because nothing else will accept touch events) but doesn't really work on the iPad. Some of the features work, and some don't. It's like it's just not quite compiling all the code, and I'm very confused.
My publish settings:
Player: AIR for iOS
Script: Actionscript 3.0
Included .swf, .xml, and all relevant .as class files
Published using quick publish for device testing
Are there some AS 3.0 features that won't work in iOS? If so it would be really great to have a list of those somewhere.
What am I doing wrong? Why won't my app work on an actual device if it tests perfectly in the emulator?

My original question has not been answered, but I am running across the same problem in a different way.
I have added to my code, continuing to build the app, (hoping the problem can be solved eventually), and once again, the app works perfectly in Device Central but not on the iPad.
I have buttons to select different levels of the puzzle. Each time you press a button, the level automatically updates itself on the board. So if you are playing the shape level, the shape of the puzzle piece is on the board. If you are playing the name level, the name of the puzzle piece is on the board. Etc.
This works perfectly on my computer. However - again - when I transfer it to an iPad, choosing the "shape" level will cause the names to pop up.
I have double and triple checked the variable names to make sure they match up and are correctly spelled and capitalized. It just doesn't function in iOS.
Here is the code to switch levels and automatically generate a new random puzzle piece:
function changeLevel (e:TouchEvent): void {
    trackUSAPiece = ["pieceAL", "pieceAK", "pieceAZ", "pieceAR", "pieceCA", "pieceCO", "pieceCT", "pieceDE", "pieceFL", "pieceGA", "pieceHI", "pieceID", "pieceIL", "pieceIN", "pieceIA", "pieceKS", "pieceKY", "pieceLA", "pieceME", "pieceMD", "pieceMA", "pieceMI", "pieceMN", "pieceMS", "pieceMO", "pieceMT", "pieceNE", "pieceNV", "pieceNH", "pieceNJ", "pieceNM", "pieceNY", "pieceNC", "pieceND", "pieceOH", "pieceOK", "pieceOR", "piecePA", "pieceRI", "pieceSC", "pieceSD", "pieceTN", "pieceTX", "pieceUT", "pieceVT", "pieceVA", "pieceWA", "pieceWV", "pieceWI", "pieceWY"]
    if (e.target == nameLevel) {
        PuzzleGlobals.currentLevel = "Name";
        nameLevel.gotoAndStop("Active");
        abbrevLevel.gotoAndStop("Inactive");
        shapeLevel.gotoAndStop("Inactive");
        for (var j=0; j<(PuzzleGlobals.TOTAL_NUMBER_USA); j++) {
            this[trackUSAPiece[j]].gotoAndStop("wholeName");
    else if (e.target == abbrevLevel) {
        PuzzleGlobals.currentLevel = "Abbrev";
        abbrevLevel.gotoAndStop("Active");
        nameLevel.gotoAndStop("Inactive");
        shapeLevel.gotoAndStop("Inactive");
        for (var k=0; k<(PuzzleGlobals.TOTAL_NUMBER_USA); k++) {
            this[trackUSAPiece[k]].gotoAndStop("abbrev");
    else if (e.target == shapeLevel) {
        PuzzleGlobals.currentLevel = "Shape";
        shapeLevel.gotoAndStop("Active");
        nameLevel.gotoAndStop("Inactive");
        abbrevLevel.gotoAndStop("Inactive");
        for (var l=0; l<(PuzzleGlobals.TOTAL_NUMBER_USA); l++) {
            this[trackUSAPiece[l]].gotoAndStop("shape");
function addNewPiece (e:TouchEvent): void {
    ri = Math.floor(Math.random()*(1+PuzzleGlobals.TOTAL_NUMBER_USA));
    if (PuzzleGlobals.statesOnBoardUSA == PuzzleGlobals.TOTAL_NUMBER_USA) {
        //play BOOP sound indicating no new pieces left
    else {
        if (usaPiece[ri] != null) {
            bmc.addChild(this[usaPiece[ri]]);
            if (PuzzleGlobals.currentLevel == "Shape") {
                this[usaPiece[ri]].height = this[usaPuzzle[ri]].height;
                this[usaPiece[ri]].width = this[usaPuzzle[ri]].width;
            this[usaPiece[ri]].x = e.stageX;
            this[usaPiece[ri]].y = e.stageY;
            usaPiece[ri] = null;
            PuzzleGlobals.statesOnBoardUSA++;
        else {
            addNewPiece(e);
Here is the code that creates the piece:
        public function GeoPiece(): void {
            if (PuzzleGlobals.currentLevel == "Name") {
                this.gotoAndStop("wholeName");
            else if (PuzzleGlobals.currentLevel == "Abbrev") {
                this.gotoAndStop("abbrev");
            else if (PuzzleGlobals.currentLevel == "Shape") {
                this.gotoAndStop("shape");
            this.addEventListener(TouchEvent.TOUCH_BEGIN, geoPieceBegin);
Is it possible I have a bad compiler or something? Do I need to reinstall the entire program? I just can't figure out why it would work in one operating system and not in another.
Thanks
Amber

Squareup integration with Adobe AIR based ios Application

Hi All,
Does anyone is having any experice to work with 'Squareup' i.e. https://squareup.com/
I want to integrate it with my adobe air based ios application.Is there any native extension is available for this?
Any information will be appriciated.
with Regards,
Shardul

Hi, please forget my last message. I was changing so many things I finished using a wrong mobileprovision. That's why I couldn't install the app in the device.
On the other hand I have found the problem. Some changes in one of our ANE were not tested in iOS 5.0.1 devices and it made the app crash because it found a Adobe Air 3.5 bug. Adobe fixed it in AIR 3.6

AIR for iOS Data Protection question again

We are looking into Protecting Data Using On-Disk Encryption for our AIR for iOS iPad apps. An article on the adobe site (Protecting content on an iOS device with DPS | Adobe Developer Connection) mentioned this can be achieved by generating Data Protection enabled AppID/provisioning profile to pacakage in the app.
After we packaged and published the app using the appropriately configured provisioning profile (Complete protection), we run an analysis on the iPad files. It's reporting that the files are using an encryption class, but the wrong one.
We run into two kinds of scenarios -
1. For App ID that "complete" data protection service is specified, the class utilized should be NSFileProtectionComplete. Instead, the class being utilized in the files is NSFileProtectionCompleteUntilUserAuthentication
2. for App ID without any data protection service selected, the files saved in the app documentDirectory is utilizing "NSFileProtectionCompleteUntilUserAuthentication".
We cannot find why is it using the wrong class when specified with another class, and why are other apps utilizing the class when they weren't designed to any data protection? Could something in Adobe AIR be overriding it or setting a default to use "NSFileProtectionCompleteUnitlUserAuthentication"?
Any feedback is greatly appreciated. We cannot find much information on this issue but data encryption has become more and more critical now. Thank you very much.

This is the Power View forum.
Try asking here:
http://answers.microsoft.com/en-us/office/forum/office_mobile-excel-os_device_ipad?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1406945625798
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Please clarify availability of H 264 encoding in AIR for iOS/Android

Hello,
I've written an app to send a live camera stream via RTMP in H 264/Nellymoser from mobile devices. The app works fine on AIR when tested on my Win7 desktop, but when I publish to AIR 3.2 for Android or AIR for iOS, it seems that the H264VideoStreamSettings are simply ignored and the video ends up in Sorenson. Is H264 supported for encoding/publishing on AIR for mobile devices? If not, is this planned for the future?
Thanks!

Unfortunately, the release notes say H.264 encoding from AIR is for the desktop version only:
http://helpx.adobe.com/x-productkb/multi/release-notes-flash-player-11.html
H.264/AVC Software Encoding for Cameras (desktop) — Stream high-quality video from your computer's camera with higher compression efficiency and industry stanard support, enabling both immersive real-time communications such as video chat/conferencing and live video broadcasts.

AIR 17 iOS - Unable to enumerate devices.

Similar Messages

Maybe you are looking for