ALE/IDOC on ABAP Trial Version: 53 but no actual update ???????
After installing ABAP Trial Version NW7 on my laptop, I copied ref client 000 to two clients (100 and 200), and set up a person business partner on each client with parnter number 1.
I then delegated BUS1006 on system 100 so that I had a YBUS1008 object with the same methods as BUS1006.
I then went thru the usual rhythm (SALE, WE20, SM59 to get the ALE stuff set up, and then used BDBG to generate my BAPI-ALE interface.
Everything went perfectly: I used SE37 on the sending system to execute the outbound function module with some changed data, and then used SALE to dispatch the IDOC that was created. Then on the input side, I used BD87 to process the IDOC.
The result of all this was a final IDOC status of "53" indicating successful posting of an application document.
But when I go into BUP2, the data for the business partner isn't actually changed.
If the IDOC posts with a "53", shouldn't I see the actual changed data in the business partner on the receiving system?
I'm sure I'm missing something simple here, but I'm not sure what it is.
Thanks for any help anyone can provide.
djh
Hi Atish -
Thanks for taking the time to reply.
Yes, the status 53 is on the receiving system, and I've used WE19 to test my inbound function module ZIDOC_INPUT_YBUS1006 (this is the one that BDBG generated.) In debugging mode in WE19, I see the function calls returning sy-subrc 0 for at least two levels down. In particular, ZIDOC_INPUT_YBUS100 calls BAPI_BUPA_ADDRESS_CHANGE and BAPI_BUPA_ADDRESS_CHANGE calls BUPA_ADDRESS_CHANGE, and both these calls return sy-subrc = 0.
But I haven't gone all the way down to the actual database update modules - maybe I have to dig deeper. I stopped when I saw that this line
MOVE-CORRESPONDING is_address TO lt_bapiad2vl.
was moving the data from the IDOC in BUPA_ADDRESS_CHANGE.
Also, one other thing that's puzzling me - when I call the inbound function module in WE19 in debugging mode, and then switch to "update debugging", I don't see code executing. It just goes to completion and comes back with a message saying the IDOC was saved and processed successfully by the function module.
If the system is really doing an update, shouldn't I see some code executing if I turn on "update debugging" once I'm in the debugger on the function module in WE19 ????
Also, I'm assuming that if the IDOC gets a status 53 with a message saying "application document posted", then the IDOC data must be correct and the inbound function module must have processed the IDOC correctly. Isn't this what a 53 means?
Anyway, thanks again for taking the time ... I'll post back if I see anything odd as I debug deeper.
Regards
djh
Similar Messages
-
Database Error during installation of SAP NetWeaver 7.01 ABAP Trial Version
Hi All,
I was installing the SAP NetWeaver 7.01 ABAP Trial Version but during the installation i got some MaxDB error.
Log.txt
(Apr 28, 2010 10:13:41 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file F:\sapdb\NSP\log.txt for details.
(Apr 28, 2010 10:13:41 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ASHISH/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ASHISH/LOCALS1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi,
In environment variables under system variables see if the path to java has been set,
JAVA_Home
C:\j2sdk1.4.2_11
JRE_PATH
C:\Program Files\Java\j2re1.4.2_11\bin\java.exe
Both these variables should be set.
The values would differ on the version of java that you are using and the
path where you have java installed.
I suggest you go with Java version 1.4.2_*.
Regards,
Vishnu -
BEx Analyzer through SAP Netweaver ABAP trial version
Hi, I have installed SAP Netweaver ABAP trial version but dont know how to get BEx analyzer. Can someone help to find out that.
Thanks,Hi ,
I doubt if the BW component is present in the NW 7.0 Abap trial.Please check this in Tcode spam -> supp. package levels (all components are listed.there, or via system information in the gui menu.
When component BW is present you can install Bex/Wad etc. via the sapgui CD.
Check these links...
For setting up BI in NW 7.0 Abap Trial version :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/how%2bto%2bguides
For beginning your first BI model in NW 7.0 :
A beginner's guide to your first BI model in NW2004S
ABAP Trial Version for Newbies :
ABAP Trial Version for Newbies: Part 1 ' Download and installation of the Trial Version '
Installation & Implementation Documentation Center
SAP NetWeaver 7.0
https://websmp105.sap-ag.de/instguidesNW70
SAP NetWeaver7.0 (2004s) Installation & Implementation Documentation
https://websmp105.sap-ag.de/~sapidb/011000358700005431532005E.pdf
https://websmp105.sap-ag.de/installnw70
https://websmp105.sap-ag.de/~sapidb/011000358700005431552005E
Hope this helps,
Regards
CSM Reddy -
SAP NetWeaver 7 Abap Trial Version - License
Hi,
We tried the link: http://www.sap.com/minisap to get the license for the SAP NetWeaver 7 Abap Trial Version but the page does not exist.
Is there a new link to get the license for the trial version?
Thanks,
ChrisHi CHRIS
The curriculum I am referring to can be found in collaborative workspace.
APPLICATION PROGRAMMING TECHNIQUES ABAP
Course Author(s): Brendan McCarthy and Stephen Paull (Victoria University)
Course Description:
This unit is taught over one semester (36 hours) and introduces SAPu2019s programming language ABAP with a focus on Report Programming.
On completion of this unit, students should be able to:
u2022 appreciate the advantages and disadvantages of using a commercial programming language to solve common business problems;
u2022 write programs to process the data necessary to produce reports;
u2022 write programs to use internal tables;
u2022 write programs that organise and process files;
u2022 demonstrate knowledge of the structure and use of files;
u2022 use a mini or mainframe computer system in a multi-user programming environment, and appreciate the advantages and difficulties of such an environment;
u2022 use structured programming techniques to produce solutions to a range of business problems;
u2022 design and document programs using techniques such as Structure Charts and Pseudocode.
The curriculum includes lecture material, workshops, tests, assignments and examinations.
The flight reservation data set is available in the IDES client. The link below provides access to PC based version of ABAP and the relevant data set.
good luck
PAUL HAWKING -
SAP NetWeaver 7.0 ABAP Trial Version
HI All
I have downloaded SAP NetWeaver 7.0 ABAP Trial Version but when I extract it . all the folders are empty plus startsap,bat cant be found. Can someone help on this.
ThanksHello Pratik,
after the successful download, the first and second file are required to install the complete trial software package. Place the files to the same folder and extract "SAP*.part1.rar" only with WinRAR.
Peter -
Uninstallation ABAP Trial Version
Hello,
I would like to uninstall the 7.01 ABAP Trial Version, but when I call the function for the uninstallation I receive the following error message:
Errors occurred during the uninstallation.
null
I've already checked the LOG file and it tells me that there is an 'java.lang.NullPointerException'
I've already searched the SDN but I couldn't find a solution.
Looking forward for some suggestions.
Best Regards
Frankyou might have better luck in the Application Server->Web AS Preview installation forum to get a proper answer.
-
NW2004s ABAP Trial Version Message Type X
Hie
I have installed NW2004s ABAP Trial Version but immediately after log on the system dumps with message type X, any transaction i try to execute dumps with that error. I am not even able to do ST22 it dumps as well!! Is there an installation step i missed out on??
regards
Isaac PrinceHi Prince,
What else have you tried? Normally, you will get this message when you use an outdated version of the SAPGUI or if the system load did not complete correctly. Have you tried restarting the system?
Another place to check are the work process traces under the work directory. One of the dev_w# files should tell you if you are running into memory issues.
Hope that helps!
J. Haynes -
Error: SAP NW 7.01 ABAP Trial Version: install successfully but don't work
Hi all,
i'm newbie.
i haved SAP NetWeaver 7.01 ABAP Trial Version on my notebook (Thinkpad X61 - Windows XP Pro) installed.
I have made as follows:
1- install MS Loopback Adapter
2- add in windows/system32/drivers/etc/hosts: 10.10.0.10 <machine name>
3- install SAP NetWeaver 7.01
There aren't any error.
If i start sapmmc, follow the syslog entry: "Communications data: Service initialization failed".
i can connect with the server on SAP Logon. it does almost everything, also database is ok, i can create a table,... . but i can't program. i made a example programm, this programm is saved, program window does not appear and it does as if it is running, but it really depends. BAPI don't work.
can someone help me, please ...
Thanks
Edited by: thi minh huyen pham on Jan 12, 2009 3:35 PMHello Thi Minh,
it looks you instaled everything ok. In trial version you can
construct new structures, but not the tables, as we should
use the tables of the flight data model.
Propably your program is also running ok, as some reports are
supposed only for debugging, and have not any results screen.
Try other reports.
Bye,
Peter -
SAP NW7.01 ABAP trial version installation on Windows Vista. Error message
Hi gurus,
I am installing SAPNW7.01 ABAP trial version.. getting following Error nessage ..ANy idea?
The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag.
I have WINDOWS VISTA with 32bit..I read in document for SAPNW7.01 ABAP trial vesrion, it can be installed on windows vista also..
Any one has any idea? I suspect it is error bcz of Java files..but I am not sure..
Thanks in advance..Hi Sanjeeva,
At first see where java is installed i.e JDK directory, as per as my knowledge it will be in WINDOWS directory like C drive.
For setting environmental variable (i.e JAVA_HOME,PATH), please follow the below link
http://www.astahost.com/info.php/Change-Windows-User-Environment-Variables_t19560.html
Thanks
Debdeep -
Installing SAP NW 7.01 ABAP Trial Version for dummies
Hello sappers...
Sorry if you thought this was a guide for dummies, though it could turn out to be if I get some help - I'm the dummy!
Not wanting to be left out, I too have had a host of issues trying to install this, over several days now... it feels like bashing your head against a brickwall. After staying up till 4am last night, then wiping my laptop and reinstalling Windows AGAIN to start from scratch this morning, and encountering the cranio-mural interface again, I feel like a crash test dummy!
I am installing on a new installation of Windows Vista Home Basic, I have a gig of RAM and plenty of hard drive space.
Forgive me if this is an ignorant question, but do I need to install the Loopback adaptor if I'm connected to the internet? If it's to generate an IP address, surely my computer has one. Note networking is not my strong point (though I'm an ok programmer - one project manager even gave me 4 out of 10!) - please be kind! Anyway, I have tried with and without this on my various attempts.
ANYWAY.... the sorry saga goes like this...
I seem to be able to install Max DB OR SAP NW 7.01 ABAP Trial Version u2013> NSP, but not both at the same time - I may have done once, and it seemed to work once, I even managed to sign on - then it wouldnt work in the morning - but then that was on Windows XP Pro on my wife's laptop which only has 500 meg of RAM.
My last attempt was fairly typical - Max DB is showing up in the program menu, but SAP NW 7.01 ABAP Trial Version u2013> NSP is not.
However, I seem to have managed to start the NSP server ok, using SAP Management console, thanks to a handy tip on this forum about using your Windows OS password when it prompts for credentials.
When I try to sign on I get 'partner 127.0.0.1:sapdp00 not reached WSAECONNREFUSED: Connection refused - error number 10061, return code -10, system call connect.
That's one of my better attempts.
Last night having deleted all the installed files from my C drive, uninstalled everything, tinkered with the registry to remove all relevant entries, I managed to run an installation that skipped out installing MaxDB (it was super quick!), yet did install the SAP NW 7.01 ABAP Trial Version u2013> NSP bits in my program menu - imagine my excitement at being able to start and stop the server, yet with no database it produced red windows on my screen saying 'sorry, you screwed up AGAIN' (or words to that effect). Trying to sign on produced equally disheartening error messages...
Am going to give it another try after taking a break, next time WITH loop back adaptor installed...
Please pardon lack of relevant detail, I didnt note everything I did on every attempt - substituting humour for detail is all that's saving my sanity at this stage...
Anyone that can help me achieve this will be my friend for ever... I'm a contractor bitten by the recession trying to learn some news skills.... the first one being how to install Netweaver at home...!
Log text gives
(Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Mar 4, 2009 12:51:11 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Mar 4, 2009 12:51:11 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)ok, this is the log from my latest attempt...
> Subprocess starts at 20090312182156
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182159
OK
7.7.06.07 C:\sapdb\NSP\db
> Subprocess starts at 20090312182159
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182159
OK
7.7.06.07 C:\sapdb\NSP\db
> Subprocess starts at 20090312182205
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182206
OK
7.7.06.07 C:\sapdb\NSP\db
> Subprocess starts at 20090312182206
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182206
OK
7.7.06.07 C:\sapdb\NSP\db
> Subprocess starts at 20090312182206
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
Execute Session Command : exit
> Subprocess stops at 20090312182209
OK
NSP C:\sapdb\NSP\db 7.7.06.07 fast offline
NSP C:\sapdb\NSP\db 7.7.06.07 slow offline
> Subprocess starts at 20090312182209
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
Execute Session Command : exit
> Subprocess stops at 20090312182209
OK
NSP C:\sapdb\NSP\db 7.7.06.07 fast offline
NSP C:\sapdb\NSP\db 7.7.06.07 slow offline
> Subprocess starts at 20090312182209
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -R C:\sapdb\NSP\db dbm_version
Execute Session Command : exit
> Subprocess stops at 20090312182209
OK
VERSION = 7.7.06
BUILD = DBMServer 7.7.06 Build 007-123-197-046
OS = WIN32
INSTROOT = C:\sapdb\NSP\db
LOGON = True
CODE = UTF8
SWAP = full
UNICODE = YES
INSTANCE = (unknown)
SYSNAME = Windows
MASKING = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
> Subprocess starts at 20090312182209
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182210
OK
7.7.06.07 C:\sapdb\NSP\db
> Subprocess starts at 20090312182210
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
Execute Session Command : exit
> Subprocess stops at 20090312182210
OK
NSP C:\sapdb\NSP\db 7.7.06.07 fast offline
NSP C:\sapdb\NSP\db 7.7.06.07 slow offline
> Subprocess starts at 20090312182211
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182211
OK
7.7.06.07 C:\sapdb\NSP\db
> Subprocess starts at 20090312182211
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
Execute Session Command : exit
> Subprocess stops at 20090312182211
OK
7.7.06.07 C:\sapdb\NSP\db
> Subprocess starts at 20090312182212
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182213
OK
State
OFFLINE
> Subprocess starts at 20090312182213
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182214
OK
State
OFFLINE
> Subprocess starts at 20090312182214
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182214
OK
State
OFFLINE
> Subprocess starts at 20090312182214
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
Execute Session Command : exit
> Subprocess stops at 20090312182228
> Subprocess call failed
ERR
-24988,ERR_SQL: SQL error
-902,I/O error
3,Database state: OFFLINE
Internal errorcode, Error code 9050 "disk_not_accessible"
20017,RestartFilesystem failed with 'I/O error'
> Subprocess starts at 20090312182303
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182304
OK
State
OFFLINE
> Subprocess starts at 20090312182304
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182305
OK
State
OFFLINE
> Subprocess starts at 20090312182305
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20090312182305
OK
State
OFFLINE
> Subprocess starts at 20090312182306
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
Execute Session Command : exit
> Subprocess stops at 20090312182316
> Subprocess call failed
ERR
-24988,ERR_SQL: SQL error
-902,I/O error
3,Database state: OFFLINE
Internal errorcode, Error code 9050 "disk_not_accessible"
20017,RestartFilesystem failed with 'I/O error' -
SAP Netweaver 7.01 ABAP Trial version
Hi Gurus,
I have installed the SAP Netweaver 7.01 ABAP trial version from SDN. I changed the settings of the Workbench Browser selection in SE80 to had checked the enhancement info system and all other checkbox.
se80 Utilities->Settings
I got a error saying only 8 can be selected. But by mistake i clicked on the enter and now it goes to dump.
now whenever I execute SE 80 i get the following dump
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_OBJECT_ERROR', was not
caught in
procedure "IF_WB_LAYOUT_MANAGER~GET_NEW_WINDOW_STYLE" "(METHOD)", nor was it
propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The dynamically specified class "CL_AMO_REPOSITORY" at CREATE OBJECT neither
exists as
local, nor as global class in the system, or is overshadowed by a local
data type of the same name.
How can I revert back to the original settings for SE80? I cannot change the settings since when i give the SE80 transaction it goes to dump.
Any help in this regard is highly appreciated.
Thanks,
NileshHi,
For Trial versions, the correct forum for this question would be
Software Downloads
@Moderators, please move to the "Trials, Previews & Other Downloads" forum if appropriate.
Regards,
Debasis. -
SAP NetWeaver 2004s ABAP Trial Version - error code = 200
Hi all,
installation of SAP NetWeaver 2004s ABAP Trial Version
which was attached to the book ABAP-Objects ends again and again with
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
Attached you find information about
1) Host-file
2) Network connections
4) Error - Log
It seems that the [# [#]
echo 7/tcp
echo 7/udp
discard
9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
#Active users
systat 11/tcp users #Active users
daytime 13/tcp
daytime
13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote
#Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen
4) == E R R OR L O G ================================================
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
an error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Jan 1, 2007 1:12:17 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err,
An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:12:17 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source
== Remark to threads ========================
Thread a)
"I found it is very useful to have a clean system" => not applicable to me
Thread b)
deals with removing relics of previous installations => hints considered but error still appears
Thread c)
not applicable to meHi all
I've read your entrys.
Saw that the solution is missing.
It can be found in the manuals:
1. Download the "Registry Clean Tool for SAP NetWeaver 2004s ABAP" and use it.
2. Download the latest Version of "SAP NetWeaver 2004s ABAP" and un-rar it.
3. Install the "Microsoft Loopback Adapter" an activate it.
4. Retry to install.
Summary:
So the error 200 was caused for the first time from trying an installation without a Loopback Adapter, and after that from trying to re-install without cleaning the registry.
Now its working fine.
Thomas -
Error after Install SAP NetWeaver 7.01 ABAP Trial Version
Hi Everyone,
I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
Someone could help me?Hello Marques Polastri ,
->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
Try to connect to the database NSP & let us know the results.
-> Please update with output of the following commands:
dbmcli db_enum
dbmcli -d NSP -u <control>,<pwd> db_state
Thank you and best regards, Natalia Khlopina -
Error Install : SAP NetWeaver 7.01 ABAP Trial Version
Hi Everyone,
I am getting this error while trying to install SAP Netweaver 7.01 ABAP Trial version.
(Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
* at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)*
* at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)*
* at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)*
* at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)*
* at java.lang.reflect.Method.invoke(Unknown Source)*
* at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)*
* at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)*
* at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)*
* at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)*
* at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)*
* at java.lang.Thread.run(Unknown Source)*
Can somebody give me suggestion how to resolve my probelm.
thanks,
Amir
PS : I have all the requirements systemdid u installed loopback adapter as mentioned in the installation instructions?
Yes, yesterday, I tried to install SAP with loopback adapter (Now, I am trying to install without loopback adapter because I have a DHCP server) -> the same error with or without loopback adapter
does your pc have internet connection available?
Yes, I have an internet connection available (I am in Hotel and there is Internet via DHCP server)
is the installation process completed?
Yes the installation process is completed and with success (but without C:\sapdb)
(Yesterday, when I had the first error and the installation process was not completed, I had the C:\sapdb.....strange)
how much time the installation taking.. usually the step of database installation and configuration takes a long time.
Not much time because there is not database installation
while logon to sap, what details are u giving.. the system number .. is it 00,
When I create the Item, I put the system number 00 but when I try to logon I have the error message that I posted in my previous message
which other SAP softwares are installed on ur pc.
In each time, when I tried to install SAP, I uninstalled all SAP software
I hope you can help me for the install
Note : I work on Vista sp1
Thank you for your help
Amir -
Sap netweaver abap trial version installation error
Hi all,
I have windows 64 edition.
i am trying to install sap netweaver 7.02 abap trial version 64 bit.But it gives folowing error
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log and C:\sapdb\data\wrk\MaxDBRuntimeForSAPAS_install_ _ .log.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.As written on the error message you have to check the log and post it here.
Regards,
Subhash
Maybe you are looking for
-
Driver program for BIll of lading smartform
Hi all, Can you please provide me the standard driver program for bill of lading smartform. or for purchase order smartform. Thanks and regards, Rajeev
-
Hi Experts I got error for file to file senario , at sender communication channel monitoring. adapters are green but when i check detialed monitoring i saw this error . can any body help me . First Error SOAPFault received from Integration Server. E
-
Hi, When im procuring asset by using a Statistical WBS in PO ,whether commitment will generate. Regards
-
Enhancement Request for Webutil
Hello Duncan, When would webutil include a facility to append client file to another client file, Application Server File to a Client File, and a Client File to an Application Server File? Currently, when there is a file transfer, the contents of the
-
IDVD '08 locks up on preview mode
i'm new to iDVD...i had created a dvd project using the default 7.0 theme (Revolution) that includes 3 different slideshows (about 20 pics per show with audio track playing with each show) and 2 video clips (originally shot in .AVI format). everythin