Alerts after SRW.MESSAGE
Hi all,
I need help to solve this problem.
I am using a trigger After_parameter_form, where I have pl/sql code to validate some parameters.
If the parameter value is incorret I'm using SRW.MESSAGE procedure to show a message to the user.
Well, the problem is after show my message, the reports runtime show its message REP:0771 - After Form Trigger Failed <ok> <help>.
Question. Can I hide the runtime's message ?
Thanks
Marcio
Propably you can use
"raise SRW.PROGRAM_ABORT;" , which terminates the report.This may help you try this.
Similar Messages
-
After effects alert last log message
What to do when I get this message when opening after effects cs6?
cs6 after effects Alert last log message was: <140735200987488> >GPUManager> <2>Sniffer Result Code: 3. Generating crash log, which may take a few minutes.
I just cannot open after effects anymore.Hi,
Now I here again, my Mac os X version is 10.7.5
Prosessor is 2.66ghz intel core 2 duo
memory 4gt 1067 mhz DDR3
Graphic card: NVIDIA GeForce 9400 256 MB
After effects version is 11.0 if I am checking it right
I have used after effects about three mounths and suddenly it just quiet working. That´s not good for my work. Luckily I got almost everything in premiere pro. Because I can´t even use files from AE in Premiere pro.
I have rebooted machine.
I haven´t reinstall AE yet. I will.
How do I trash preferences and from where? I cannot open AE at all. -
DISPLAY ONLY CUSTOM MESSAGE WITH SRW.MESSAGE
Hi.I created a report with Report Builder 9i.I also created two form parameters of type date.I put inside the validation trigger in the property inspector the following plsql code.
function FROM_DATEValidTrigger return boolean is
v_date VARCHAR2(12);
date1 date;
begin
v_date := :from_date;
date1:=TO_DATE(v_date, 'DD/MM/YYYY');
return (TRUE);
EXCEPTION
WHEN OTHERS THEN
SRW.MESSAGE(546,'My Message');
return (FALSE);
end;
This code works fine.Supose the user input wrong data for example 29/02/2003 displays an alert message
with my custom message.But after this displays an another message from the Report Builder like this:
Rep-0546:Invalid parameter input.
My question is .Is it possible display only my custom message with the SRW.MESSAGE built in procedure?
Thanks in advance Panagiotis.Hi,
I am using this function in my Validation process to display Error when user gives null input
function DEPT_IDValidTrigger return boolean is
begin
-- Check for Null Value here
if(:DEPT_ID is null) then
raise SRW.NULL_ARGUMENTS;
else
return true;
end if;
Exception
-- Exception For Null Value
when SRW.NULL_ARGUMENTS then
srw.message(100, 'Please Enter Dept ID');
raise srw.program_abort;
end function ___ ;
Function is correct but the error message i am getting at the client side is as follows ::
"*MSG-00100: Please enter Dept IDREP-1419: 'dept_idvalidtrigger': PL/SQL program aborted.* "
It seems it is adding some system level error.
but i want only my custom message to be displayed on the client side ::
*"Please Enter Dept ID"*
Is this Possible in Oracle 6i. -
How to set an 'alert' or reminder message for end-user Acrobat X form.
Hi,
I'm trying to see if I can add an alert or reminder message for the end user who will be filling in a form that I'm creating from Acrobat Pro X.
Does it require a script if so, could anyone share one that is already exists?
If it doesn't need a script, how can I set that up?
What I want to do, is to remind end-user to fill in Numbers Only and not text. I have already set my properties for numbers only and provided an example. But, In-case end users did not understand, I'd like to have a message for them to say that they must type in number and not text.
Currently, with the limitation I've made, they couldn't type in any letters but, they might be frustrated and not fill in anything!
Please help!
Thanks,Thank you for the code.
Is it correct to put that code under VALIDATE > run custome validate script, within the Properties box?
Because I tried it, and it worked only AFTER I typed a number onto the field.
Since my goal is to have the alert BEFORE, so if someone typed in a text, they should see the alert and correct themselves to type in a number instead.
Please clarify.
Thanks! -
Where can we see the SRW.MESSAGE
Hi
I am new to Oracle Reports. I have a report developed in EBS and it has SRW.MESSAGE statements. After the report is run where can I see the log of these messages. Can some help.
ThanksHello rajesh as you told that the cost esimate is deleted.
Then there is no way to see the cost estimate.
You canonly see the cost esimate in CK40N or in CK13N but you can not see the itemiaxation of that material for ehich we create the cost estimate.
Hope it will clear you
IF this informetion is usefull for you please assign some points
Regards
Ravi -
ISE advanced eval license alerts after full base install.
Has anyone had an issue with the advanced eval license triggering the below alerts after a full base license has been installed and the advanced eval license has expired?
How can I keep the license expiration warnings and avoid receiving warnings for an expired eval licence?
This is on Cisco ISE Software Version 1.2.0 full running on a ISE-3315-K9. There is no requirement to go to a full advanced license.
License Expiration
Details :
Advanced License expires in 30 days
Description :
The License installed on the ISE nodes have been expired or about to expire
Suggested Actions :
Please contact CISCO Account team to purchase new licenses
*** This message is generated by Cisco Identity Services Engine (ISE) ***Gary,
The way to supress this message is to disable the License Expiration Alarm.
To do this, go to Administration > System > Settings. Choose Alarm Settings from the Left Menu.
Scroll down and select Licensing | License Expiration from the list of Alarms.
Click the Edit Button and use the dropdown to change the Status to Disable. Click Submit and you're done.
I would then set a Calendar reminder through Outlook (or on your phone) to enable this feature once the expiration date for your Advance License has passed.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton -
Oracle Reports builder 10g
I have an lov that is dependent upon the lov above it. If the user picks a choice in the second lov that does not correspond the report will crash. I want to add a message that says 'Incorrect lov for parameter XYZ'. How do i do this in the after parameter form.Something like this in your after-parameter-form might be all you need.
IF <CHOICE IS NOT VALID> THEN
SRW.MESSAGE(1,'Incorrect lov for parameter XYZ');
RETURN (FALSE);
END IF;Hope this helps.
p.s. you would have to supply the logic for the <CHOICE IS NOT VALID> criteria
Edited by: jl1997 on Mar 15, 2011 9:30 AM -
Alert after silent installation of Essbase excel add-in
Hi,
We have to deploy excel add-in for many users , so we are planning to do it using the silent installation.We succeded in recording the resonse file and running the silent installation. But problem is we are not getting any alert after the instaltion is complete.Only way is we need to go into All Programs, where in it is showing that some new programs are installed.
Could you please suggest us a way for getting an alert message either in the command prompt(from where we run the silent installation) or in the form of a pop-up.
Regards
PratThe Excel addin has the most versitility for reporting and adhoc analysis. You can do things in it that you can't do with Web analysis. Pleus paower users who have a good knowledge of Excel prefer working in excel than on the web
-
Trouble change ringtone and alert after update
i can't change ringtone n alert after update firmware with my e5, tell me please if you have solution
Can you provide more details..like how exactly you are trying.. ? Any error message ?
-
Vf_vmnic linkstate alerts after vMotion
We upgraded our UCS infrastructure from 2.1 (1f) -> 2.1 (3c). Ever since we've started receiving linkstate down/up alerts from vCenter whenever a VM is vMotion'ed. We're not doing high performance / DirectPath I/O.
I understand with the nature of dynamic vNIC's, these linkstate changes are normal with a vMotion. What I don't understand is why we only started receiving alerts after the upgrade. I've had a case open with Cisco TAC for more than 2 months, they can't reproduce the behavior - though their test environment is running 2.2 and they don't want to downgrade.
Does anyone know how to suppress these messages? Either from the UCS or ESXi side of things? We get a couple dozen emails each day due to this from vCOPS, and unfortunately vCOPS notifications aren't flexible enough to weed them out. I've been told vCOPS v6 contains a complete retooling of the notification system, but the beta isn't due until the end of the year.
Thanks,
Reece
VMware ESXi 5.1u1
vem status -v
Package vssnet-esxmn-next-release
Version 5.1-1.1.1.1
Build 1
Date Mon Sep 24 11:51:42 PDT 2012
Number of PassThru NICs are 48
VEM modules are loaded
DVS Name Num Ports Used Ports Configured Ports MTU Uplinks
VM-FEX 256 73 256 1500 vmnic12,vmnic10
DVS Name Num Ports Used Ports Configured Ports MTU Uplinks
Management 256 7 256 1500 vmnic1,vmnic0
DVS Name Num Ports Used Ports Configured Ports MTU Uplinks
NAS 256 6 256 9000 vmnic4,vmnic2
DVS Name Num Ports Used Ports Configured Ports MTU Uplinks
vMotion 256 6 256 9000 vmnic8,vmnic6
Number of PassThru NICs are 48
VEM Agent (vemdpa) is running
hostd.log:2014-08-07T15:13:31.002Z [45C82B90 info 'Vimsvc.ha-eventmgr'] Event 38445 : Physical NIC vf_vmnic7 linkstate is down.
vmkernel.log:2014-08-07T15:13:30.047Z cpu14:8243)<6>enic 0000:17:00.0: vf_vmnic7: Link DOWN
vmkernel.log:2014-08-07T15:13:30.502Z cpu11:8714)hardPts: hard_niv_port_update:4912: Unclaimed VF<vf_vmnic7/0x2000008/Idx:8>
vmkernel.log:2014-08-07T15:13:30.502Z cpu11:8714)hardPts: hard_niv_process_link_event_vf:916: Got a Link DOWN on VF vf_vmnic7 in state: Connected Unclaimed, Ignoring
vobd.log:2014-08-07T15:13:30.503Z: [netCorrelator] 6561411644570us: [vob.net.vmnic.linkstate.down] vmnic vf_vmnic7 linkstate down
vobd.log:2014-08-07T15:13:31.000Z: [netCorrelator] 6561695768710us: [esx.problem.net.vmnic.linkstate.down] Physical NIC vf_vmnic7 linkstate is down -
Keep getting Keychain password changed alert after removing password
I Keep getting a "Keychain password changed" alert after removing a user account password my mother applied to the account and then forgot. How do I keep this message from continuing to appear?
I am not really sure how the keychain system works as I have never used it on my own Mac.keychain is where you store the passwords you use on various websites, in mail and other apps. I suspect you use it too. but it's normally quite unobtrusive.
by default the password to unlock the keychain is the same as the account password. but this does not have to be and you can change it. when you reset the account password the keychain password was not reset. unless you can recall the old account password the old keychain is of no use to you. go to the folder homedirectory/library/keychains and delete the file login.keychain (or move it somewhere else). then log out/in. a new empty keychain will be created with the password the same as the new account password and you can start saving passwords in that. -
Is there a way to hide the reading pane in iPad mail after a message is read?
Is there a way to hide the reading pane in iPad mail after a message is read?
Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.
-
Delivery gets created in VL01N - Return scenario even after error message
Hi,
I am having following issue explained in details in steps -
We have a service return scenario and following steps have been followed in ECC.
Material code used in this case is batch managed material.
Step 1 u2013
We have created a sales order(VA01) with document type ZRE(Itu2019s a kind of return order). This return order actually coming from CRM.
Step 2 u2013
We are creating delivery using VL01N transaction for return order.
Step 3 u2013
We avoid giving batch number in VL01N and try to save the delivery document. System prompt error saying u201CEnter batchu201D. Subsequently we press return keys to cancel the error message and try to come out of the transaction.
Step 4 u2013
Instead inputting batch number, we try come out of the document creation step.
Step 5 u2013
We go to document flow button of sales order and we could see the delivery created although we came out of the delivery creation process after the error message, without saving the document.
Also note instead of coming out of the document creation, if we again try to save the document, system throws update termination with a reason saying u201CError info... ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPRECu201D, which is quite obvious as system has already created the delivery and we are trying to create / save the document once again in VL01N
We are in dilemma now.
What is the cause of this abnormal behaviour? I don't know.
Any one experienced this, feedback is appreciated,
Regards,
DipakHi,
The SAPSQL_ARRAY_INSERT_DUPREC error is not bothering me much.
My worry is once "Enter batch" error message comes, I am not interested to create the delivery any more.
So I come out of the transaction by pressing return key.
Now when I press return key, system gives me the delivery number, this should not be the case as message given was an error message.
If I go to the SE16N, I could see the delivery number in database.
Also system prompts me to save the delivery which I am not interested to do, just I want to come out after error message.
What could be the reason, I don't know. Ever after error message system gives you the delivery.
Which is very strange.
Any input is apprecited,
Regards,
Dipak -
File Adapter: Run OS command unix after processing message
Hi,
in file adapter configuaration, after processing message, I've configured the channel that it has to call an unix script.
The sintax in configuration is:
sh /XS0/usr/sap/XS0/DVEBMGS01/work/TEST_FILE_XI/OUT/rename_lib_contabili.sh <variable>.
I tried also without the entire path and without the sh command at start of it.
We have a XI 3.0 sp20.
I don't understand, What other I have to do.
Regards,
AntonelloHi Carme,
I found a warning that "describes" the error...
2009-09-29 13:36:15 Success Write to file "/XS0/usr/sap/XS0/DVEBMGS01/work/TEST_FILE_XI/OUT/LIBROGIORNALE_test_mov.zip" as binary, size 7248 bytes
2009-09-29 13:36:15 Success Execute OS command "/home/xs0adm/scripts/rename_lib_contabili.sh LIBROGIORNALE_test_mov.zip"
2009-09-29 13:36:15 Warning Error when executing OS command "/home/xs0adm/scripts/rename_lib_contabili.sh LIBROGIORNALE_test_mov.zip"
2009-09-29 13:36:15 Success File processing complete
2009-09-29 13:36:15 Success MP: Leaving module processor
2009-09-29 13:36:15 Success The message was successfully delivered to the application using connection
File_http://sap.com/xi/XI/System.
2009-09-29 13:36:15 Success The message status set to DLVD.
if I try to execute this script from Unix schell or ABAP OS shell this working fine.
You have any idea?!
Thanks,
Antonello -
System went down after this message Client is not known to the mess server
Hi Guru's,
I am running 4.6c on Ora 8i, Windows 2000 Server. We have 1 application server. The central instance and DB is on same host.
<b>Initially i got following error message 2 times in the system log reading:-</b>
No free memory available in class PERM . Memory block ID "abtsv2", 958955044 bytes
<b>After above message I got an information message Continuously 30 minutes in the system log reading:-</b>
Client cinsapp1_PRI_00 is not known to the message serve
<b>Then stoped the workproccess one by one</b>
Stop Workproc 5, PID 4800
Stop Workproc13, PID 4468
Stop Workproc18, PID 4508
Stop Workproc11, PID 4452
Stop Workproc14, PID 4476
Stop Workproc12, PID 4460
Stop Workproc17, PID 4500
Stop Workproc24, PID 4560
Stop Workproc23, PID 4552
Stop Workproc25, PID 4576
Stop Workproc10, PID 4444
Stop Workproc16, PID 4492
Operating system call recv failed (error no. 10054)
Operating system call WSASend failed (error no. 10053)
<b>Finally R/3 system was stoped.</b>
Please let me know the process how to check the trace for this problem. If any body got same problem please suggest me how can i resolve this problem.
Thanks in advance,
RameshHi Experts,
How you fixed this issue, Please share with us.
because i am also facing the same problem in one of our SAP server.
Thanks & regards,
Pandiyan
Maybe you are looking for
-
Is there a way to block access to neighbor's wi-fi network? I'm trying to restrict kids from internet after hours. I can control access to my router, but not all my neighbors. Any ideas?
-
Word 2011 crashes when using "save as" in mountain lion
Dear fellow Mac-users, I have recently re-installed Mountain Lion 10.8.3 (I stepped down from Mountain Lion to Lion due to exchange server frustrations), and I have noticed that it is completely impossible to use "save as" without crashing word 14.3.
-
Hello, I have seen that a "fix pack 2" has just been released for CR 2008... what's inside ?? where can I find a release note for this fix pack ? thanks in advance for info. Regards, Gilles
-
My friends aren't getting my "delivered" iMessages
The title pretty much says it all. My friends have their read reciepts on too and none of them have seen them. What do I do to fix this problem?
-
Help! I am a newbie at this. Have an Iphone 4s has been working fine. I use my calendar for appts. and I have assigned ringtones for certain contacts. Today for no reason that I know of the calendar is empty and the special ringtones are gone. I just