All Files (-69) Another Explanation?

Is there another explanation for (-69)?
I don't think the files are really corrupted because through everything I have done, there hasn't been any consistency in error messages until now. Plus, I started fresh with a CD and it didn't work.
I'd appreciate any advice. I'm about ready to give up on Apple.
I've already:
Done the 5 R's many times
Updated iTunes to 7.0.2 (and uninstalled/reinstalled)
Updated iPod (dock) to 2.3 (iTunes says it is updated too)
Tried an earlier version of iTunes 4.7
Used the disc that came with iPod to start over
Checked the hard drives on my computer
Stopped and started iPod services
Removed all files and added them again from from where iTunes saves them also from my back up drive
I am on Windows XP service pack 2 and the USB cable works fine for charging.

Still looking for solutions for the above question.

Similar Messages

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

The events and projects folders have to be on the top level of the drive for FCP to recognize them.

Letter-Spacing is different if I open my file at another Mac of us (Value is at both mac 0, but the text is longor), and if I cklick into the text-box, Illustrator says that the file was made in an other Version of Illustrator. We have on all macs the sam

Letter-Spacing is different if I open my file at another Mac of us (Value is at both mac 0, but the text is longor), and if I cklick into the text-box, Illustrator says that the file was made in an other Version of Illustrator. We have on all macs the same system, os 10.8.3, cs6 and UTC4. And of course we`re using exactly the same font....

Packpool,
I believe the first thing to do is to update to 16.0.5.
Adobe - Illustrator : For Macintosh

How to move all FC X files to another drive?

I want to move all my FC X stuff. Everything currently resides on a Western Digital Firewire 800 eSATA drive. I'm working on a MacPro tower with 20 GB of RAM and 4 cores. I'm not overly pleased with the performance when FC X accesses this drive and it gets hot, really hot (burn your hand hot) when backround rendering for large files. I suspect moving the whole kit and kaboodle to an internal SATA would improve overall performance a bit and I can use smcFanControl to regulate the temperature.
The question: By doing this will FC X lose all the links to the source files that I've already used in projects? If so, how do I reconnect media?
I have about two tons of source footage that I imported from cam archives primarily as an excersise when I was first beginning to learn about importing footage in the new app, so much of it is not critical (I can always reimport from the original archives safely held on another drive) however, they've already been analysed and sorted into smart collections at this point and I may want to use some on future projects. So - should I delete events not used in projects thus far and then properly move the ones that are used in projects via the Move command in the FILE drop down menu or just copy all the files and folders in the FC X folder on the eSATA drive to the internal drive via the finder? I'm not currently in the middle of any projects. All have been succesfully completed and rendered out as movies. The clients are all happy and the most important thing - the checks all cleared, so no worries there. Benefits? Pitfalls? Any opinions? We're talking about 1.5 TB of data here.
Jimbo
Damage Control ✴
[email protected]
Doctors Of Chaos

WizOfAhhhs wrote:
VERY USEFUL answers! Unfortunately they don't have a button for that.
Now there's an idea...! maybe worth sending apple feedback about their discussion group
WizOfAhhhs wrote:
I just noticed you're a Bruce from down under. I just returned from Sydney where we worked on the pyro displays for the new year show in the harbor. Hope you got to see the show and enjoyed it. Channel 9 covered it very well, I thought. Posted on uTube. Too bad they didn't put it up there at higher resolution. Maybe it's on Vimeo in hi-res, haven't checked.
Hahah... that's too funny, Bruce from down under. Yes Bruce is a common ozzy names just as much as Scott, Gavin, Turner etc.... But yeah how lucky are you...!
WizOfAhhhs wrote:
Ausie to the rescue!!! Thanks for all the help, Blimpie. All files successfully moved and linked to current projects. FCP X running much more smoothly/faster and no more BAD ACCESS errors causing crashes.
That's cool Jimbo, glad I could help. Next time your here in Sydney pop me an email, we should meet up.
WizOfAhhhs wrote:
I guess the eSATA firewire 800 drive was just not quite fast enough for constant read/write access or maybe it was overheating. I put all the camera archives over there and everything seems fine now.
Shouldn't be the case, I've cut successfully from a 500gb My Passport Studio HD But keeping in mind I transcode my media.
WizOfAhhhs wrote:
BTW, the really large events files not referenced in any current projects were able to be moved via the finder much faster than from within FCP X without any noticeable problems.
I always transfer via finder however I try not suggesting that because it's something you have to feel very comfortable with.
Thanks for the link, I'll check it out.... Happy editing
Tony

IN Premiere Pro CC how can I group copy all files in time line to another part of the time line

How can I group copy all files from one part of the timeline to another part

From the Premiere Pro manual (I believe track targeting matters, too. That is, the targeted tracks only are copied):
Copy command enhanced to operate on a range in a sequence
The existing Copy command (Edit > Copy, Ctrl+C (Windows), Command+C (Mac OS)) is enhanced when used in the Timeline panel. If there are no clips or keyframes selected, and an In Point or Out Point is set, then the range of time between the In point and Out point is copied to the clipboard.

My iMac all of the sudden started going in and out of the dashboard, then started changing all files on the desktop to 2's. It also did this when having another window open. Do I have a virus?

My iMac all of the sudden started going in and out of the dashboard, then started changing all files on the desktop to 2's. It also did this when having another window open. Do I have a virus?

There are no viruses that can affect Apple OS X.
What files do you keep on the Desktop? How many?
Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Here is Apple's take on the subject:
http://www.apple.com/pro/tips/immaculate_desktop.html

TS2972 transferred all songs to file in another computer now want to transfer back

transferred all songs to file on another computer, turned on home sharing, set up new computer and now want to seperate the songs to our own computer..

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
If you already have iTunes Version 11 installed...
From the View menu > Select " Show Sidebar "
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

Using Terminal to copy all files (hidden and not hidden) and folders from one place to another

How -using Terminal- can I copy all files (hidden and not hidden) and folders (and their contents) from one place to another

ditto
DITTO(1)                  BSD General Commands Manual                 DITTO(1)
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ...
           dst_directory
     ditto -h | --help
DESCRIPTION
     In its first form, ditto copies one or more source files or directories
     to a destination directory. If the destination directory does not exist
     it will be created before the first source is copied. If the destination
     directory already exists then the source directories are merged with the
     previous contents of the destination.

How do I copy and paste from one page or file to another page or file - on the same screen?

How do I copy and paste from one page or file to another - on the same screen?

Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale.

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How do I move content from one file to another ?

Hi,
I have two separate DVD Studio Pro files that I created a while back (single-sided DVD).
Now I want to put them both on a dual layer DVD. However, I can't figure out for the life of me how to copy content between files. I don't want to "recreate" one of the DVDs from scratch.
How do I move the menus, tracks, stories, etc from one DVD Studio Pro file to another ?
Thanks,
Damon

You do not need to move the media into the new project assuming all the media is available and on the same hard drive. Usually I keep all DVD SP projects and media on an external drive so it is easy-ish to do. Of course if you copy the assets into the folder for a project it makes thingss easier to move around to other drives. In other words I will create a Poject folder called "MYPROJECT" and in there I will placefolders "MYPROJECTM2Vs", "MYPROJECTAC3S", "MYPROJECTGRAPHICS" etc so if I have to move projects to other computers easier to re-link. Takes up a bit more room if you use the same asset in more than one project but with the costs of Drives so low right now it is worth the lkess hassle to me...
What is the error you are getting?

How can I copy layers from one .fla file to another .fla file?

Hi,
How can I copy layers from one .fla file to another .fla file? Please do help.
Thanks.

Select all the frames you want to copy, right click and select copy frames then select the file you want to paste them into and right click again and then paste frames.
The layers the frames are should come across with them.

Script to search all files in specified folder for multiple string text values listed in a source file and output each match to one single results txt file

I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.

I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if

All Files (-69) Another Explanation?

Similar Messages

Maybe you are looking for