All of a sudden i can't reply to emails. they just go into my outbox. what is smpt and why is it different to my email address please?
all of a sudden i cannot reply to emails. they just go into my outbox. ewhy is this and what is SMPT? and why is it different to my email address please?
SMTP stands for Simple Mail Protocol and is basically what handles your outbound emails.
Regards,
Steve
Similar Messages
-
I had no problem connecting to my network and now all of a sudden I can't connect my iPad. Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss. Anyone else have that problem? I've gone thru all my settings and can't seem to find a way to log into my network. Don't get the option to put in my password. It just give me the name of my network and option of dismiss instead of password.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
All of a sudden I cannot get wifi in my bedroomon my ipad. I never had trouble before. The signal is strong on my laptop. I did a hard reset with no results. When I bring the ipad into the other room it logs right on to the internet. There have been no physical changes ie: interfernce near my room. Any suggestions?
1. Turn router off for 30 seconds and on again.
2. Settings>General>Reset>Reset Network Settings. -
My mac mini is running very slow all of a sudden, how can i restore it's speed?
my mac mini is running very slow all of a sudden, how can i restore it's speed?
This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
All of a sudden i can't send email
all of a sudden i can't send email with my frontier accounts. it fetches incoming email fine but i can't reply or send new email. it just sits in the outgoing box never to be sent. i checked all my out going server- smtp.frontier.com, port-25, password and username settings with the isp and all are correct. even tried some new port numbers, was using 25, told to try 587 and 465 but none seem to work. i have 3 gmail accounts and they all work fine. is this a system failure with VZ or is something wrong with my droid x? or some other setting? please help. thanks, al
Email back to working again. I am able to send and receive with no issues. Strange behavior with email. No apparent reason for this happening other than the weather was bad yesterday, cloudy, overcast with thunderstorms. Maybe disrupted signal?
-
All of a sudden I can no longer toggle or clip angles in multiclip sequence
Hi,
I've got a project with a number of sequences, videos, angles, etc and all of a sudden I can no longer toggle between angles in the sequence timeline. It was working last night and then stopped and it's still unresponsive. Every time I click to switch an angle or cut to an angle I get the alert beep.
I am not out of disk space and haven't changed any settings as far as I am aware of.
ThanksNot sure what the deal is...have you added any new software or upgraded/updated anything since this started?
Have you tried opening an autosave version, to see if it works there?
Trashed prefs, run disk utility?
I'm not sure I've ever heard an 'alert beep', so would wonder if the drive is failing.
Can you be a little more explicit about exactly how it 'stopped working'...were you right in the middle of working on it, or had you stepped away for a bit?
Have you tried shutting down, then rebooting after 15-20 minutes? -
I can not send email from my iPad . Have been using it for over a year, all of a sudden I can only receive email. I have a wifi connection in my home and have a A T &T cellular data plan?
I have a 1st gen iPhone that I just updated the software to 2.0.2
Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
Anyone??? -
iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
MarcoHello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really. -
All of a sudden I can no longer open tabs by clicking "+" or right clicking on the tool bar. To open a new page, I have to open a whole new Firefox window. How can I fix this?
Also, Firefox crashes frequently. Is there a fix for this also?Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox 3.6 that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons
For the second issue, the [[Firefox crashes]] support article may help. -
All of a sudden I can't print my calendar in 'month' view. It only does day or list. Any thoughts.
All of a sudden I can't print my calendar in 'month' view. It only does day or list. Any thoughts?
Thank you so much... I put this in another thread too, but, through help I learned that it is the errors that's causing this. The problem is that I don't know enough to fix it. It happens in a nested table, (don't know CSS well enough either to use it instead) and I can't figure it out... its a full page table, 50% on each side, and a center cell that should contain a same-size nested table... as in, I want to put all the content in the center.
The error: "table" is not allowed within: "tr"
<body>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="50%" valign="bottom"></td>
<td width="980" align="center" valign="bottom"/><table width="980" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="980"> </td>
</tr>
<tr>
<td width="980" align="right" valign="bottom"> </td>
</tr>
</table>
</td>
<tr> <td width="50%" valign="bottom"></td>
</tr>
</table>
</body>
</html> -
All of a sudden I can no longer connect to iTunes store. There is no error message - it just hangs.
After 3 years of happily using iTunes store all of a sudden I can no longer connect. There is no error message, the attempted connection just hangs. Why?
I ran the iTunes diagnostic and got a positive result - I am, apparently, in contact with the Store. But I still cannot connect. I have carried out all ther suggested operations ... and still cannot connect! The diagnostics gave me the following report:
MicrosoftWindows Vista Home Premium Edition Service Pack 2 (Build 6002)
DellInc. Inspiron 530s
iTunes10.4.1.10
QuickTime7.7
FairPlay1.12.20
AppleApplication Support 2.0.1
iPodUpdater Library 10.0d2
CDDriver 2.2.0.1
CDDriver DLL 2.1.3.0
AppleMobile Device 3.4.1.2
AppleMobile Device Driver 1.57.0.0
Bonjour3.0.0.2 (333.2)
GracenoteSDK 1.9.1.485
GracenoteMusicID 1.9.1.102
GracenoteSubmit 1.9.1.133
GracenoteDSP 1.9.1.43
iTunesSerial Number 00C9ABD80C0C17E8
Currentuser is an administrator.
Thecurrent local date and time is 2011-09-16 09:59:06.
iTunesis not running in safe mode.
WebKitaccelerated compositing is enabled.
HDCPis not supported.
CoreMedia is supported.
VideoDisplay Information
AdvancedMicro Devices, Inc., ATI Radeon HD 2400 Pro
****External Plug-ins Information ****
Plug-inName: ilikesidebarplugin.dll
Plug-inLoaded: Yes
Plug-inVersion: Unknown
Plug-inFile Version: 0.1.2.17
Plug-inPath: C:\Program Files\iTunes\Plug-ins\ilikesidebarplugin.dll
GeniusID: 89d0032fba99eb83151c418c649bb3e6
iPodService10.4.1.10 is currently running.
iTunesHelper10.4.1.10 is currently running.
AppleMobile Device service 3.3.0.0 is currently running.
****Network Connectivity Tests ****
NetworkAdapter Information
AdapterName: {185DA300-4391-4FBB-9BC2-AC4894001787}
Description: Intel(R)82562V-2 10/100 Network Connection
IPAddress: 0.0.0.0
SubnetMask: 0.0.0.0
DefaultGateway: 0.0.0.0
DHCPEnabled: Yes
DHCPServer:
LeaseObtained: Thu Jan 01 01:00:00 1970
LeaseExpires: Thu Jan 01 01:00:00 1970
DNSServers:
AdapterName: {63090950-4731-4D95-89CB-57F1B6ABBACC}
Description: Broadcom802.11g Netværkskort
IPAddress: 192.168.1.106
SubnetMask: 255.255.255.0
DefaultGateway: 192.168.1.1
DHCPEnabled: Yes
DHCPServer: 192.168.1.1
LeaseObtained: Fri Sep 16 01:34:21 2011
LeaseExpires: Sat Sep 17 01:34:21 2011
DNSServers: 193.162.153.164
194.239.134.83
ActiveConnection: LAN-forbindelse
Connected: Yes
Online: Yes
UsingModem: No
UsingLAN: Yes
UsingProxy: No
SSL3.0 Support: Enabled
TLS1.0 Support: Enabled
FirewallInformation
Connectionattempt to Apple web site was successful.
Connectionattempt to browsing iTunes Store was successful.
Connectionattempt to purchasing from iTunes Store was successful.
Connectionattempt to iPhone activation server was successful.
Connectionattempt to firmware update server was successful.
Connectionattempt to Gracenote server was successful.
Lastsuccessful iTunes Store access was 2011-09-16 09:51:39. -
All of a sudden I can no longer open a new tab using either the icon on the tab bar, the keyboard short cut or the File menu option. I can open a new tab ONLY by clicking on a bookmark or link
This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbAD2/3.12.2.16749
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
My MOTO X was working fine, then all of a sudden, I can not receive text messages. I have checked the settings and they look correct to me, and I have done everything the web site recommends, except wiping the phone and starting over, to try and fix it. Has anyone else had this issue, and how did you resolve it?
Thanks so much.That's strange that your Moto X wont receive any text. Thank you for trouble shooting the issue. Let's see what's going on! Does your device have any physical or liquid damage? Does anyone else have an issue with calling or texting? What zip code are you in?
VanetrisC_VZW
Follow us on Twitter @VZWSupport -
I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?
Hi Mary,
I don't remember those arrows in 10.6, only 10.7 & up!?
I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved all the way to the left. Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
By wuzradioman here...
https://discussions.apple.com/thread/4218928?start=0&tstart=0
Maybe you are looking for
-
Error when copying update rules!!!
Hello All, I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly. Error when copying update rules Patch levels are SAP_BW - 0014 BI_CONT - 0005 Please help me in solving this er
-
Need more Info about "Load transactional data when master data not loaded"
Hi, Can you please explain me this option in the infopackage " Load transactional data when master data is not loaded".... Say i load a transactional data record which has a material no. AAAXX. In the fact table, the material no. is replaced with the
-
Determine (and Minimize) LabVIEW Build Dependencies?
Is there a way for LabVIEW to analyze a project and determine auto-magically exactly what additional installers need to be included with the main program installer? It seems to know it needs to add the associated run-time engine but that's it. This
-
Passing parameters from one form to another in swings
hi Could you please let me know is there any provision to pass the values between two forms in Swing.. For Example: I have two forms : 1 Login Page and 2. Main Form. After Login Confirmation i want the User name to be displayed in the second form. Th
-
My Apple TV and IPad drop after x mintues from "Home Sharing". To restart it, I need to close iTunes on my Windows 7 PC, open it , then I can listen again X minutes (15-90 minutes) to my music via "Home Sharing". Any idea why? What worked for you?