All text on computer is replaced with capital A in a Box

at first it was only when I was in safari and it was only the menu. then i restarted the computer and it is always like that now.
i read about this somewhere and people have said only a reinstall os osx would fix it but i am hoping for a better answer. if i do have to reinstall can you reinstall the os without losing data such as photos or do i have to back up everything and format and reinstall? i have never reinstalled the os on a mac so i have no idea what to do. thank you.

You can certainly reinstall using Archive and Install, which will preserve your user data and settings. Read the instructions and make sure to check "preserve user preferences and settings" and you should be just fine,

Similar Messages

HT1386 when I first bought my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?

when I first got my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?

Have you copied your library over from your old computer : http://support.apple.com/kb/HT4527 ?
There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141

TS1474 I have just tried to sync my iphone with my computer. All my purchased songs were replaced with what was on my computer which was nothing. How can i get them back onto my phone or computer?

Hi, I have just tried to sync my iphone with my computer. I must have clicked the wrong thing, now all the songs i purchased through my phone from itunes were replaced with the itunes that was on my computer, which is nothing. Any ideas on how can i get them back onto my phone or computer? I can see them in the itunes store under purchases, but there are no options for me to download them again.

Hi J8on,
Thanks for visiting Apple Support Communities.
You can find the steps to download past iTunes purchases to your computer or iPhone in this article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Regards,
Jeremy

Mac Terminal: computer name replaced with "virus"

Hi, I'm having an issue where, in my Mac terminal, the space where the computer name is shown is instead replaced with the word "virus".
virus:~<username>$
Additionally, my internet connection either works terribly or not at all, and this only seems to happen at night. I have no idea what's going on, but maybe somebody can shed some light on this?

The most plausible explanation is that someone with access to your computer is messing with you. There's a number of ways of changing the computer's name shown at the command prompt (at least one doesn't involve touching your computer at all):
1. If your computer is given a name by the DHCP server (your Internet gateway, or whatever you are using), an individual can modify the name that the DHCP service gives your computer and your computer will simply adopt that name when receives its IP address assignment. (Doesn't require access to your computer.)
2. If your computer didn't get assigned a host name by DHCP, then the system will do a reverse DNS lookup on the IP address it gets. If the DNS server (or /etc/hosts) returns 'virus' as the host name for that IP address, then your system will use that name. (Doesn't require access to your computer.)
3. If neither of the first two things happened, the system will use the name you set in the Sharing pane of System Preferences. (Someone can set this by simply walking up to your computer and setting it, or by logging in with an admin account and editing /Library/Preference/SystemConfiguration/preferences.plist).
4. Someone could also edit the default prompt used by bash. The environment variable PS1 contains the prompt template string, the default being PS1='\h:\W \u\$ ' -- the '\h' means host name. You can do
'echo $PS1' to see if it's set this way. PS1 can be set in /etc/profile, /etc/bashrc, ~/.profile, and ~/.bashrc
There's a couple of other possibilities if you are integrating with Active Directory or Open Directory

If I sync my ipod touch with itunes, it all will be lost, and replaced with the old ones!

I plugged my ipod touch with several pc's, and if I sync with my pc, so Will all the programs replaced the old I had before. But if I do, can I download all the purchased music and all the programs my free? Since I've been downloading it before? Jardar.

- Yes. If you sync with another coputer. the contents of the iPod will be replaced with those on the new computer.
- You can redownload most iTues puchases b:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- You can transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- For other music you will need a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- If yo want to retain app data like saved games, do the following after all the apps and other things on in the iTunes library:
---- Connect the iPod t the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup

DWCC2014.1 - When Inserting an Image, all code is wiped and replaced with HTML framework containing an iFrame

I recently upgraded to DW CC 2014.1 on my Mac - which caused me a number of issues. But the one I'm facing right now is very strange.
Whenever I try to insert an image - either via the shortcut, or through the top level dropdown dialogue - when the file browser comes up, all of my HTML code disappears, to be replaced with a starter template and an iframe. This happens about 90% of the time - but it sometimes works correctly, and I can't figure out why it does work that 10%.
Usually, I can just cancel the file browser and Undo to get my code back. But occasionally that doesn't work (and neither does Revert), and I have to close the document and re-open to my last save.
Here's what appears when my code vanishes:
Anybody know what's happening here? I don't use any specially created shortcuts. I've run into several issues with 2014.1 that have impacted my productivity, and it's getting increasingly frustrating.

I am experiencing the same issue.
Environment: Mac Pro 6,1/OS X 10.9.5/DreamWeaver CC 2014.1 6947 Build
Relevant software: DefaultFolder X 4.6.10 (16690)
Steps:
1) Position cursor on its own line in Code panel of Split View.
2) Press Cmd+Option+I [OR] select Insert > Image > Image
3) Navigate to image using file browser
4) Click OK
5) Repeat the above steps to insert a second image
Result with DefaultFolder X active:
1) The first insert completes as expected [OR] all HTML code between opening and closing body tags disappears, and a frame tag with a source attribute pointing to the file itself is inserted after the closing head tag
2) For subsequent inserts:
If the first insert completed as expected: If the cursor is indented from farthest-left, all HTML code between opening and closing body tags disappears, and a frame tag with a source attribute pointing to the file selected in the first insert appears after the closing head tag. If the cursor is not indented, *most* subsequent attempts will reproduce the issue
If the first insert produced the issue: all subsequent inserts will reproduce the issue, and the frame source will be the file itself
Result with DefaultFolder X disabled:
1) The first insert completes as expected [OR] all HTML code between opening and closing body tags disappears, and a frame tag with a source attribute pointing to the file itself is inserted after the closing head tag
2) For subsequent inserts:
If the first insert completed as expected: If the cursor is indented from farthest-left, all HTML code between opening and closing body tags disappears, and a frame tag with a source attribute pointing to the file itself, no matter what file is selected in the file browser dialog, appears after the closing head tag. If the cursor is not indented, *most* subsequent attempts will reproduce the issue
If the first insert produced the issue: all subsequent inserts will reproduce the issue, and the frame source will be the file itself

All contacts lost on backup. replaced with emails addresses from macbook

Today i backed up my BB to my macbook. I selected full back up as usual, only when i checked the macbook, the contacts from my phone hadn't copied over.
So, i looked on support which said i should select contacts on my phone , choose options and then switch off wireless synchronisation and try again , with USB again.
I did this. Now strangely all my phone numbers have vanished from my phone and have been replaced with email contacts from my macbook. All numbers- gone.
i tried then to go to restore on macbook again, using BB software desktop thingy it will allow me to back up everything apart from my contacts which is greyed out.
Can someone please help. Ive got 10 years worth of phone numbers on that phone and ive lost every single one.
Is there any way to get them back?
Whats happened?

Contact applecare. they have procedures for this.

All text on computer has gone into symbols

Suddenly I cannot read any file names or help menus or anything on the computer, as all text has converted into some kind of symbol font

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and the support article linked below for instructions. If Font Book finds any issues, resolve them, then boot in safe mode* (by holding down the shift key at the startup chime) to rebuild the font caches. Boot again as usual and test.
Mac 101: Font Book
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case only, after running Font Book, launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo atsutil databases -remove
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. After running the command, reboot as usual.

HT1329 i try to sync my ipods music to my new laptop and tells me that it will remove all of my ipod and replace with itunes library(which is blank) pleas help

I just got a new laptop and i have an ipod touch 4th gen, and i want to sync my music, and it told me its gonna delete all the music from my ipod if i proceed and it will replace it with whats in the library, yet nothing is in the library.. I just want to make it quick and easy, put whats on my ipod(music, apps etc.) move it to itunes so its on both my ipod and my itunes library, someone please help me

See Recover your iTunes library from your iPod or iOS device.
tt2

All the menus are coming up as capital A in a box and so are all the icons

All the Menus and icons are coming up as capital A with a square around them.The main tool bar is also this way which includes all the drop down menus.
Need to fix soon. Please help me out on fixing this annoying issue, Thanks, Eric

Hi, and welcome to Apple Support Communities.
Which version of Mac OS is installed?
How big is the hard drive and how much space remains available on it?
Have you tried repairing permissions?
http://support.apple.com/kb/HT2963?viewlocale=en_US

Find and replace with multiple files and with a watch folder

I am trying to create a watch folder that uses red_menace script to:
1. Have a folder that receives multiple xml files that run the script one by one.
2. then move the files to an output folder.
I tried modifying the set TheFIle to choose file -- the original text file to:
with multiple selections allowed
But that doesn't seem to work. I know i'm missing a step. Any help is much appreciated!
Thanks!
The way i'd like to setup things is having an input folder on the desktop (or just have the application on the desktop and I can drag the files onto it), and let it do it's thing. Once it's done have it export the xml files into an output folder.
Here's what i got so far:
on open
set TheFIle to choose file -- the original text file
set TheFolder to ("Macintosh HD:Users:user1:Desktop:out") -- the folder for the output file
set TheName to (GetUniqueName for TheFIle from TheFolder) -- the name for the output file
set TheText to read TheFIle -- get the text to edit
set Originals to {"KPCALDATE", "KPCALEVENT", "KPCALDAY", "KPCALBODY", "obituaries name", "" & return & "</cstyle></pstyle>" & return & "<pstyle name=\"obituaries text\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>", " .com", " .net", " .org", " .edu", "www .", "www. ", "Ho- nolulu", "<pstyle name=\"kicker 12\"><cstyle allcaps=\"1\">fashion news</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "<component name=\"Headline 1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline 1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 36\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>-", "-", "
Per serving:", "<pstyle name=\"Titlebar - mini, red\"><cstyle allcaps=\"1\">NATION & World </cstyle><cstyle allcaps=\"1\">Report</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "</cstyle></pstyle>"} -- the terms that can be replaced
set Replacements to {"subhed", "subhed", "subhed", "Normal", "obituaries text", ", ", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>
", ".com", ".net", ".org", ".edu", "www.", "www.", "Honolulu", "", "<component name=\"Headline1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 27\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>", " ", "
Per serving:", "","" & return & "</cstyle></pstyle>"} -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (replaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end open
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is missing value then set TheExtension to ""
set TheName to text 1 thru -((count TheExtension) + 2) of TheName
set NewName to TheName & "." & TheExtension
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & "." & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to replaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as Unicode text -- TID's are case insensitive with Unicode text
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
return SomeText
end replaceText
Message was edited by: gamebreakers

When you use the open or adding folder items to handlers, you need to add the parameters for the file items passed to them.
I'll go ahead and post the applet/droplet version of my original script from the previous topic for reference:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
-- search and replace multiple items applet/droplet/folder action
-- the terms to replace - edit as needed
property EditableItems : {¬
"one", ¬
"two", ¬
"three", ¬
"four", ¬
"five", ¬
"six", ¬
"seven", ¬
"eight", ¬
"nine", ¬
"ten", ¬
"eleven", ¬
"twelve", ¬
"thirteen", ¬
"fourteen", ¬
"fifteen", ¬
"sixteen", ¬
"seventeen", ¬
"eighteen", ¬
"nineteen", ¬
"twenty"}
-- the folder for the output file(s) - change as needed
property TheFolder : (path to desktop)
property LastEditItems : EditableItems
on run
the applet/droplet was double-clicked
open (choose file with multiple selections allowed)
end run
on open TheItems
items were dropped onto the applet/droplet
parameters - TheItems [list]: a list of the items (aliases) dropped
returns nothing
repeat with AnItem in TheItems
ReplaceMultipleItems from AnItem
end repeat
end open
on adding folder items to this_folder after receiving these_items
folder action - items were added to a folder
parameters - this_folder [alias]: the folder added to
these_items [list]: a list if items (aliases) added
returns nothing
repeat with AnItem in these_items
ReplaceMultipleItems from AnItem
end repeat
end adding folder items to
to ReplaceMultipleItems from SomeFile
replace multiple text items in SomeFile
parameters - SomeFile [alias]: the file to replace items in
returns nothing
set TheName to (GetUniqueName for SomeFile from TheFolder) -- the name for the output file
set TheText to read SomeFile -- get the text to edit
set Originals to (choose from list EditableItems default items LastEditItems with prompt "Select the terms to replace:" with multiple selections allowed) -- the specific terms to replace
set LastEditItems to Originals
set Replacements to (EditItems of Originals with Title given Prompt:"Edit the following replacement terms:") -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (ReplaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end ReplaceMultipleItems
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is in {missing value, ""} then
set TheExtension to ""
else
set TheExtension to "." & TheExtension
end if
set {NewName, TheExtension} to {TheName, (ChangeCase of TheExtension to "upper")}
set TheName to text 1 thru -((count TheExtension) + 1) of TheName
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to ReplaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as text
if SomeText contains OldItem then
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
try
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
on error ErrorMessage number ErrorNumber -- oops
set AppleScript's text item delimiters to TempTID
error ErrorMessage number ErrorNumber
end try
end if
return SomeText
end ReplaceText
to ChangeCase of SomeText to CaseType
changes the case or capitalization of SomeText to the specified CaseType using Python
parameters - SomeText [text]: the text to change
CaseType [text]: the type of case desired:
"upper" = all uppercase text
"lower" = all lowercase text
"title" = uppercase character at start of each word, otherwise lowercase
"capitalize" = capitalize the first character of the text, otherwise lowercase
returns [text]: the changed text
set SomeText to SomeText as text
if CaseType is not in {"upper", "lower", "title", "capitalize"} then return SomeText
return (do shell script "/usr/bin/python -c \"import sys; print unicode(sys.argv[1], 'utf8')." & CaseType & "().encode('utf8')\" " & quoted form of SomeText)
end ChangeCase
</pre>
Edit: how does the choose from list dialog handle those big strings? I'm guessing not very well - is that why you avoided using them?
Message was edited by: red_menace

I have just installed itune again. now i sync problem of existing music will be replace with new itune which is empty. how can i keep my pervious files and sync new....

i have just installed itune again. now when i sync it, it show me warning that all existing music will be replace with new itune which is empty. h
ow can i keep my pervious files of music photos and other files and sync with new installed itune

Use your backup copy of your computer to put everything back on the computer.

HT1473 How do I sync new purchased music onto my ipod without deleting/replacing with current library. I recently changed computers and new library doesnt have any of my playlists either.

Hi All:
I recently got a new computer, authorized new one with itunes and when I go into my library it has none of my playlists that I originally created. Also, I purchased new songs on itunes and as I did in the past, I connected my ipod Nano to automatically sync to get the new music and hopefully all my playlists would go into my itunes library and I received a message asking am I sure I want to delete all my ipod contents and replace with library contents? I canceled and dont want to loose my existing ipod collection as I have more songs on there than my itunes library plus my playlists are all on my ipod. What I want to do is sync new songs to ipod and sync my playlists from ipod to my itunes library.
Please help!!
Thank you so much!
Michelle

Welcome to Apple Support Communities
If you purchased all songs in the iTunes Store, plug your iPod to your Mac or PC and iTunes will ask you to transfer purchases.
If you didn't purchase any song or you have non-purchased songs from the iTunes Store, you have to use an application to transfer the songs to iTunes. Here is a list of applications you can use for that > https://discussions.apple.com/message/11319208#11319208

HT4191 Notes getting mixed up and or replaced with other users i-phone?

For some reason whenever I sync my i-phone 4s and my wife syncs her i-phone 4 to itunes on our laptop which is a compaq(I don't know if that might be a problem) by the way, some of her notes always gets deleted and gets replaced with my notes, and she'll have just a couple of her notes but most of mine. It's been driving us crazy for months now cuz we can't figure it out! Do we need to sync our phones on different computers? Is there a setting that I'm missing? What are we doing wrong????

Please let me know whether you experience the following issue, and submit feedback (or if you are an Apple Developer, a bug report). This issue is not related to synchronization.
Title/Subject:
Contacts 7.1 replaces one contact's Notes with another contact's Notes
Summary:
This issue's significance is severe because data is permanently lost: After searching for contacts and editing one of the contact's Notes, all found contacts' Notes are replaced with the changed contact's Notes.
Steps to Reproduce:
1. Launch the Contacts 7.1 app in OSX 10.8.2.
2. Search for a string that appears in several contacts' Notes field.
3. Click on one of the contacts in the search results.
4. Ensure that "Edit Card" mode is NOT enabled.
5. Alter the found string in the contact's Notes field.
6. Click on a different contact in the search results list.
Expected Results:
The change is saved and the changed contact disappears from the search results list.
Actual Results:
All found contacts disappear from the search results list, and all found contacts' Notes are replaced with the changed contact's Notes.
Regression:
This issue did not exist in OSX 10.7's Address Book app. I have not had the opportunity to test earlier releases of OSX 10.8's Contacts app.
Notes:
Example:
Suppose a search for "P1" finds three contacts:
Name: Alan | Note: Ask permission. P1
Name: Betsy | Note: Backup files. P1
Name: Charles | Note: Call. P1
While "Edit Card" mode is NOT enabled, in Alan's note, change "P1" to "P2". Then click on Betsy in the search results list. Betsy and Charles' Notes are erroneously and permanently replaced with Alan's Note:
Name: Alan | Note: Ask permission. P2
Name: Betsy | Note: Ask permission. P2
Name: Charles | Note: Ask permission. P2

Replace With After Effects Composition... What's the Point...???

Hi...
So I have a timeline that I want to CC in AE....
I select all the clips and choose "Replace with After Effects Compostion"
PPRO correctly initiates an AE launch which then correctly makes a Composition with all my clips in it...
Now, ALL the clips, while there in the AE Comp, DONT have the clip names I gave them in the Timeline in PPRO.
They have the original clips names. Like MVI_9987.MOV which is totally misleading....
Why on earth would PPRO NOT adopt the names of the clips in the timeline to the after effects compostion ??
This is my major gripe with Adobe, you have so many GREAT and VERY Innovative but totally NON-Thought-Thru' features. It is killing me.
This here among so manu other things is what makes your CS Suite (Aside from Photoshop) a Pro-Sumer Solution....
A professional solution is NOT regarded professional because it has fancy features, it is regarded as such because the features it HAS have been WELL contemplated and integrated.
I hope your CS6 version is going to take care of all those small problems...
But then again, been having those hopes since CS4

The bit I do not understand is why the need to rename the Clips and how that becomes of value in either PPRO or AEFX (or Resolve or elsewhere).
Say YOU have to colorize my movie that I am currently cutting. The timeline consists of about 630 clips, derived from about 300 sources (Clips in Bin)
The clips in the bin have the original rush name... Thus BLABLA.mov... This way you can alsways go back and in time. Adobe has integrated something called METADATA and THAT should be use to describe scenes, shots etc.
That is why adobe made a BIG deal out of integrating Metadata..
Now, in above scenario let us assume that you CC in AfterEffects. I'll send you the project via overnight on a hard drive, and tomorrow you open it either via Importing the Project into AE or by opening it in PPRO and hitting replace with AE comp.
You going to get 630 individual layers in the AE Com. The layer names are going to be derived from the source clips. So you are going to be looking at MAX 300 different names. YOU SHOULD be looking at 630 different names. But you are not.
AE will ignore the PPRO clipsnames and just generically name the layers by the source clip name.... Again... even if I had renamed all the source clips in the bins ONE source clip could be contain 7 differen subclips in the whole timeline.. ALL THOSE clips would share the same name... Thus nothing to do with it label..
So, now I have YOU on the phone, breathing down my neck, trying to communicate to me WHICH clip had THAT cool sunrise effect. I DID label it Sunrise... But PPRO and AE messed that up... So I go....
Hoooold On, Shooter..... Let me just open the timeline and count from left to right.... 1,2,3,4,5,6.... 459,,,, Ohhhh there it is... Clip number 459 from the left... Have fun Counting clips.
I hope you understand what I am saying, if not... OK... at least then I can understand why you DONT understand -) (No Disrespect Meant)
You make the following over dramatic claim about how fast your workflow is ....but to me, that would be slow and imprecise.
Based on your questions I can understand why you would feel that way.
I bet you are one of those guys thinking FCPx's event library sucks ;-)
Can you tell me how you name the clips in the workflow you describe here...?
I select the clip, hit ctrl-r (rename clip), give it a name and move on to the next...

All text on computer is replaced with capital A in a Box

Similar Messages

Maybe you are looking for