All the profit centers in a plant

hi
can any one tell me how to see the all the existing Profit centers in a plant
either through a table or through a transaction

Hi Reddy,
a report based on table BSEG will to 100% sure NOT solve your issue as in table BSEG only the transactional data posted to FI is stored. If the plant information is available depends on the application (does the application transfers the plant information?) but also depends on your customizing (is the field status activiated for plant? etc)
You can check with the PCA assignment monitor which profit center is assigned to a material as the profit center assignment is made on material/plant level. (Example: You have material a in plant x and in plant y, then you can assign a profit center to material a in plant x AND you can assign a different profit center to material a in plant y).
A possibility will be an ABAP report on table MARC which is a master data table for materials. In this table you have the plant information and you have the profit center information available. Based on this table you can write an own ABAP to determine which profit centers are assigned to a plant or vice versa.
Cheers,
Daniela

Similar Messages

  • How to set the profit centers

    Hello experts
    i want to know about profit centers i have created a profit center also defined the distribution rule for the profit center
    i want to know how the transaction takes place according to profit center and its distribution rule do i have to define the gl account for a profit center pls explain with example.....

    HI,
    SAP Business One enables you to define profit centers so that you can monitor and regulate the costs of your business processes effectively. The profit center reports give you important information about the costs and revenues that have arisen, sorted by area and department.
    First of all, you define the various cost centers or departments in your company as profit centers. You then assign revenue and expense accounts to the profit centers so that any data relevant to a profit center can be updated automatically for all transactions entered in the system. Costs are allocated to the profit centers using information that you define in a distribution rule. This means that any costs incurred will be allocated to the profit centers on the basis of a specific key. If you decide that the way in which costs are allocated no longer reflects the way in which your company works, you simply change the distribution rule as required. You can use the Profit Center Report to generate a profit and loss statement for any profit center and period.
    In addition to conventional financial accounting (where the values of all business transactions are recorded), many companies also perform cost accounting. The aim of cost accounting is to determine how profitable a companyu2019s business activities are.
    Hope this helps,
    Son.

  • Having Multiple Material Codes with Different Profit Centers in one Plant

    Hi,
    Can someone explain me what impact it will have, if there are different Material Codes with multiple profit centers in a single plant? For example, say Material 1 has Profit Center as PC1 and Material 2 has Profit Center as PC2 and they are in a single plant. Will this have impact on Financial Transactions?
    Thanks and Regards,
    Sameer Joshi

    Hi Sameer
    No negative impact.. It is very much possible and logical
    All the purchases made - > Stocks and vendor liability will be tagged to the PC of the Material
    All the sales made -> COGS, Revenue and Customer Liability will be tagged to the PC of the material, unless you overwrite using a Substitution
    Br, Ajay M

  • How can I get all prctr ( profit centers ) ?

    While creating function module,
    I have created import parameter as 'ZIMPORT_PRCTR' for Profit Center
    ( cepc-prctr ) in my zfunction module .
    It takes( imports ) input of multiple values Profit Center.
    Next what I need to do is, if end user enters multiple values of profit center
    ( IF ZIMPORT_PRCTR[] IS NOT INITIAL. )
    Then…  I have to use user entered values for picking up some other data from other tables.
    Ques). IF user don’t enter any profit center value, then
    I need to take all profit centers into consideration and pick up other data from other tables  .
    How can I get all profit centers ( if user does’t enters any value )
    And I don't have any values to use in my where condition ?
    Could you please help me ?

    create one structure in Se11 like
    profit center low
    profit center high
    option
    sign ( Like select-option ,see the rsparams structure),use this strucire in Function module ..
    when compare the data in select query ,in where condition use as in operator,if user does not enter any value ,it gets the all the value from table.

  • Blocking of all the postings in a particular plant

    Experts,
    I want to block all transaction postings to a particular plant.
    How to do it without deleteing any IMG assignments?

    Hi
    You can mark all the materials maintained in the plant for deletion, this will stop all the transactions using the material master.
    Thanks & Regards
    Kishore

  • The ability to measure cash in and outflows based on the Profit Centers

    Hi,
    As you may be aware, we are currently undertaking a global project to split our Balance Sheet based on the divisional structure (Profit Centres in SAP).  The splitting of Receivables and Payables by Profit Centre. We have an additional requirement in the area of cash flow. What is required is the ability to measure cash in and outflows based on the profit centre that the movement relates to.
    Please help me on the above issue.
    Regards
    Srinivas

    Ok closing based on my research
    It is often not possible to set the size of a buffer so that it never becomes full. Above a certain size, which is greatly dependent on the hardware and the operating system, the performance advantage of the buffer is canceled out by increased operating system paging. A buffer that occupies too much main memory forces the operating system to perform expensive paging.

  • Two profit centers in same plant for one material

    Dear All
    We have this request from a customer.
    There is a material in 1 plant but need to track that same materials in 2 different cost elements depending on where these are used (e.g. for sales will be booked to profit center 1 and demo will be booked to profit center 2)
    Now we can partially achieve this by splitting them into 2 storage locations however this will only give a report on quantity and not separate valuation since 1 material can only have 1 profit center per plant. So we can know there are for example 4 sales item in sales storage location and 2 item in demo storage location but we will not know their price valuation as it will show 1 combined value for all 6, and we cannot assume valuation per item to be total divided by 6 because the value for the sales item and demo item need to be different.
    Is there a way to achieve this?
    We could copy the material to another material with different material number but this is not ideal since it will create problems at the backend when updating material data and also causes duplication which we want to avoid.
    Any suggestions on how this can be achieved -- e.g. I am sure most companies have demo units which are separate from delivery units how is this scenario managed in those companies?
    Regards
    Anant

    Hi
    Use split valuation. Using Split valuation one material can have multiple valuation prices. In your case you can create two Valuation types (Demo and Sale item) for valuation category say XYZ. Then you can manage different price for Demo and Sale item even if the material is same.
    Read below example: If you have same material grade A and grade B. Grade A is $100/Kg and Grade B is $80/Kg. This kind of scenario is possible by using Split Valuation.
    Regards,
    J.Sankar

  • Material Code with Different profit Centers in One Plant

    Hi Experts,
    There is one requirement in my project that given in detailed below please:
    Material code                     Plant                       Profit Center
    MSR009                            2011                       2011
                                                                            2012
                                                                            2013
    one material code, one plant and 3 profit center,. the material should trigger with different profit center from sales order to revenue booking..
    So is it possible to map that configuration in SAP, if yes please guide me
    Thanks and regards
    Madhu

    Hi,
    Profit centre is trigured through
    Material master
    Company code + Cost element
    When you create sales order it id derived form material master if you maintained in material master
    Else at the time of invoice creation and account posting it is derived from company code + cost element combination(Which is mentianed in OKB9 by FICO people)
    kapil

  • All profit centers are not showing up in KCH6N

    Hi All,
       We have loaded a list of profit centers to a new box and all of them are not showing up in KCH6N. CEPC table has all the loaded PC's.
      Thank you in advance,

    Hi,
    How did you load these profit centers - LSMW, ALE or manual? 
    If it is anything other than ALE, it will be available under the corresponding nodes when your do a expand all nodes.
    If you have uploaded the profit centers in the new system through an ALE, the problem is that it updates the table CEPC directly without using the t-codes and therefore the standard hierarchy doesn't get updated.  Even SAP recommends not to update the standard master data tables directly and it should be done by using the relevant t-codes either manully or through LSMW
    We had such an experience and we had to reload all the profit centers through LSMW again.
    Thanks and Regards,
    Bhuvaneswari.S

  • Problem while running the Profit center Plan/Actual Report in Background

    Hi
    While executing the T.Code s_alr_87009722 (Profit Centre plan/Actual Comparision Report) on fourground it is giving all the profit centers/groups in the particular profit center group. But when i run the same report in back ground mode it is picking only the last profit center in that group. Please help me regarding the same.
    Regards
    Surya

    hi prakash ramu,
    even it is not working. it is directly talking me to spool request..
    i think it is not possible, while ur running the report in background.,
    any how if possible could u pls send me the code...
    thanks
    ramu

  • Mass Activation for Profit Centers

    Hi
    I have two company codes (1000 & 2000). Now each company code had different profit centers. But i was able to use each others' profit center. (For ex: I was able to post in company code 1000 using profit center related to company code 2000).
    Hence i removed the tick in profit center to company code assignment. After removing tick, when i saved it, it saved into inactive status.
    So i will have to manually activate all the profit centers. There are around 2200 profit centers. So manual activation of profit center is not possible. Please help.

    Hi,
    You can try these transactions:
    KE55 ---> treatment collective profit centers for master data
    KE56 ---> treatment collective profit centers for company code
    Regards,
    Lyoré

  • Multiple profit centers under one code

    Hi Team,
    When we have more than one profit centers created under same code, the system gives "+" for the name and when we double click on the name1, it displays all the profit centers.
    Incase I want the name and details of the profit center as on today, how do we get it?
    Please refer this text at
    http://help.sap.com/saphelp_47x200/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
    for better understanding and it reads-
    *If a field within the validity period or an analysis period contains several values, the system displays a u201C+u201D in that field. You can drill down to the values for the different intervals by choosing  or by double-clicking on the corresponding field.*
    *The hierarchy area is always time-independent. It applies for the entire validity period and cannot therefore be changed for individual analysis periods.*
    Hope somebody has a solution for this...
    Thanks
    Raghu

    Hi,
    I assume you are referring to a profit centre with several analysis periods. You can see the field values for the relevant analysis period by selecting the analysis period via u201Cset analysis periodu201D icon (F8) in KE53.
    When viewing the profit centre for the complete validity period, the u201C+u201D sign for fields with different values for different analysis periods cannot be prevented as there is no possibility to display multiple field values.
    Regards
    Karl

  • Cannot delete profit centers

    Hi, we're planning to re-upload our profit center data using LSMW. The problem is I cannot seem to delete the profit centers. After marking/deactivating all the profit centers for deletion (via t-code KE54) I processed the transaction to delete the inactive profit centers (t-code KEOD2). I made sure that it was an update run, therefore upon completion of the transaction, the profit centers should've been deleted. Surprisingly though, all the profit centers that should've been deleted earlier, were still in the system and their status have changed from Inactive: Delete to Active.
    Anything wrong with what I did gurus? Hoping for your brilliant suggestions and comments.
    Regards!

    Dear Patrick,
    In order to delete Profit Centers please refer to the following notes that provide comprehensive and detailed information to resolve your issues and suggest how to improve performance should you need to delete many profit centers.
    Note: 9158     Delete profit center
    Note: 376005 Performance when deleting profit centers
    I hope this helps to resolve the issue for you. I wish you all the best in your endeavours.
    Kind Regards,
    Brendan

  • Multiple Profit Centers in ISU

    Hi All,
    We are implementing SAP ISU for an Energy business which has multiple profit centers. In EK02 for a combination of Main Transaction , Sub Transaction , Account Determination ID , we can assign only one profit center.Now I want to generate Invoice from multiple profit centers but the Revenue GL Account will be same for all Profit Centers.So I want to know whether mapping of multiple profit centers with same GL account is possible in anyway.Account determination id I cannot use to achieve the same as account determination id is used for subledger code.
    Thanks in Advance,
    Banasri

    Hi,
    Thanks for your reply.
    I am elaborating the scenario as below:
    In my company I will create around 50 profit centers but the revenue GLs are same for all the profit centers.Now in EK02 , the key parameters are Co.Code/Division/Main Transaction/Sub Transaction/Acct Determination Id.
    Now for invoicing , I will use Main/Sub - 0100/0002.This main/sub will be used in 50 profit centers with same GL.But if I don't change any of the key parameters in EK02 , then I cannot change either the CO Acct Assignment key or GL Account.So only option remains is to use 50 Acct Determination Ids for 50 profit centers.But again these Acct Determination Ids are more relevant for sub-ledger code.So my question is whether there is any other way of assigning 50 profit centers to same main/sub , other than manipulating Acct Determination Ids.
    Thanks,
    Banasri

  • How to find the profit center group for a profit center?

    How to find the profit center group for a profit center?

    Hi,
    try this also
    In order to pass the setid parameter of the FM, you have to concatenate the following things
    Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
    In my example below, I have declared as constants and concatenating to gv_setid.
    gc_01016 is the set id for profit centers
    gc_kokrs is the controlling area
    gp_pprct is the Profit Center group entered in the selection screen.
    You will get KOKRS value from the cepc-kokrs.
    data :   gc_0106(4)   TYPE c VALUE '0106',
               gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
               gv_setid          LIKE sethier-setid,
               gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
      CONCATENATE gc_0106  gc_kokrs gp_pprct INTO gv_setid.
      CONDENSE gv_setid.
      CALL FUNCTION 'G_SET_TREE_IMPORT'
        EXPORTING
          client                    = sy-mandt
          fieldname                 = 'RPRCTR'
          langu                     = sy-langu
          setid                     = gv_setid
          tabname                   = 'GLPCT'
          no_table_buffering        = 'X'
        TABLES
          set_values                = gt_set_values_1
        EXCEPTIONS
          set_not_found             = 1
          illegal_field_replacement = 2
          illegal_table_replacement = 3
          OTHERS                    = 4.
    By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
    Regards,
    Venkatesh

Maybe you are looking for