Allowing Lync Mobility Access for AD Group
Is there any way to allow the Lync 2010 Mobility access to specific AD Group. Exp. once i add the users to group then they should get Lync Mobility access.
Please advice
Kris
I thought about this a bit more, if you had a scheduled task, you'd also want the inverse. You'd want to turn the policy off for users pulled out of the group. I wrote this up:
http://www.lyncfix.com/?p=574
Of course, the tricker you get, the more you'll probably want a full script. But, here's a command that would take "Your Group" and if a Lync user is not a member, it would set the MobilityDisabled policy. If they are a member, it would
set the MobilityEnabled policy. If you'd rather user the global policy instead of MobilityDisabled, you could set the policy to $null instead.
Get-CsUser | ForEach {$myuser=$_;if (-not (Get-ADGroupMember “Your Group” | Where { $_.samaccountname -eq $myuser.samaccountname } )) { Grant-CsMobilityPolicy $myuser.identity -policyname “MobilityDisabled“} else {Grant-CsMobilityPolicy $myuser.identity -policyname “MobilityEnabled“}}
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
Similar Messages
-
I have a current machine Windows 7 Pro with a Cisco VPN 3.5v client that currently connects with access to a customers network.
They shipped a second machine Windows 8.1 Pro without adding local accounts, that is pre-joined to a sub-domain the first system has access to.
Would it be possible to use the first machine as a ICS or Router to allow the second machine to see or access for log in, without returning to the customer site and plugging in for a log in point?
Trying to save a 3 to 4 hr trip and lugging a system back for myself and the rest of the team.
ThanksHi,
Please refer to this part
http://windows.microsoft.com/en-hk/windows/using-internet-connection-sharing#1TC=windows-7
ICS and VPN connections
If you create a virtual private network (VPN) connection on your host computer to a corporate network and then enable ICS on that connection, all Internet traffic is routed to the corporate network and all of the computers on your home network
can access the corporate network. If you don't enable ICS on the VPN connection, other computers won't have access to the Internet or corporate network while the VPN connection is active on the host computer
Yolanda Zhu
TechNet Community Support -
hi
When i try to sign in to Microsoft Lync Mobile on your Apple iOS-based device (such as an iPhone or iPad), i receive
one of the following error messages:
Can't connect to the server. It might be unavailable. Also please check your network connection,
sign-in address and server addresses.
what can i do ?
please help me
tanksHi aylin.f
In addition to what other people said, if you want to use mobility feature, you must deploy cumulative update for Lync Server 2010: November 2011.
After you install the CU for Lync Server 2010 and set the
ports , you need to install the new Microsoft Lync Server 2010 Mobility Service and Microsoft Lync Server 2010 Autodiscover Service.
Click the link below for more information.
Deploying Mobility
Hope it can be helpful.
Best regards,
Eric -
Prevent external calls from Lync mobile
I would like to allow people from my compagny to use lync mobile but I don't want them to call external number from lync mobile. ( for cost reasons, in order to avoid phone call initialisation from the compagny)
some precisions:
We are using lync 2010.
All people have a lync account and can call external number from their lync desktop.
So is there a mean to prevent people calling external number from lync mobile?
Thank youHi,
Agree with Anthony, If EnableMobility is set to True and EnableOutsideVoice is set to False, the user can run Lync Mobile but will not be able to use Call via Work.
Please make sure when you running the cmdlet you are a member of
RTCUniversalServerAdmins
More details:
http://technet.microsoft.com/en-us/library/hh690021.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Remove access for each member of a particular dimension from Hyperion Planning Applciation
We are trying to remove access for groups for each member of a particular dimension( which has more than 1000 members) of a Hyperion Planning application. We are going through Administration->Manage DImensions -> member , Under security click view and select the group and then remove access But the problem is there are more than 1000 members under this dimension , so it will be time consuming to go to each member and then remove access for the group. Is there any other way we can do this?
Also is there a way to bulk delete native directory groups from Hyperion Shared services, instead of deleting each native group manually one by one?The reaso we want to go for Relational tables is that when we did Exportsecurity utility for that planning application and imported back the SecFile.txt without doing any changes ,still it errored out giving errors like :
"The following access not imported:-"PLN-ORG-0278-999 Bureau Strtgc & Oprtnl ""PLNning",0278-999,READWRITE,MEMBER due toInvalid user name found in the file."
It is erroing out even if we did not do any modifications to the secfile.txt.
Moreover there are more than 1000 members for which we have to remove access permissions manually one by one. It is a tedious process.
So we are looking at other options like , which relational tables have got Native directory groups information, and the sql queires we can execute to remove the unwanted Native directory groups from Shared Services? -
Hello everyone,
I tried run a query in AD to find distribution and security group created after a certain date, but I could not run a query on the field "whenCreated" attribute if someone can provide me a powershell maybe on how to generate a list for any
groups created after a certain date, it would be awesome.
Thanks!
Chad
ChadI get all the below information for each group, I did not know I was going to give me this much information when I only need the CN or Samaccountname, that why I asked in my previous reply on how to export just the CN name...
CanonicalName : corp.com/corpGroup/ITCreative Group In
ternet
CN : ITCreative Group Internet
Created : 5/15/2013 9:30:59 AM
createTimeStamp : 5/15/2013 9:30:59 AM
Deleted :
Description : Internet access for Creative group
DisplayName :
DistinguishedName : CN=ITCreative Group Internet,OU=corpGroup
,DC=corp,DC=com
dSCorePropagationData : {6/10/2014 1:10:47 PM, 6/10/2014 12:59:17 PM,
6/3/2014 8:50:20 AM, 2/25/2014 10:53:20 AM..
GroupCategory : Security
GroupScope : Global
groupType : -2147483646
HomePage :
instanceType : 4
isDeleted :
LastKnownParent :
ManagedBy :
member :
MemberOf : {}
Members
Modified : 7/23/2014 11:26:55 AM
modifyTimeStamp : 7/23/2014 11:26:55 AM
Name : ITCreative Group Internet
nTSecurityDescriptor : System.DirectoryServices.ActiveDirectorySecur
ity
ObjectCategory : CN=Group,CN=Schema,CN=Configuration,DC=itserv
e,DC=com
ObjectClass : group
ObjectGUID : b00724b8-a76e-4457-bde7-8a858f60d3e3
objectSid : S-1-5-21-1551699216-1247871332-452798024-1927
3
ProtectedFromAccidentalDeletion : False
SamAccountName : ITCreative Group Internet
sAMAccountType : 268435456
sDRightsEffective : 15
SID : S-1-5-21-1551699216-1247871332-452798024-1927
3
SIDHistory : {}
uSNChanged : 497056326
uSNCreated : 95639022
whenChanged : 7/23/2014 11:26:55 AM
whenCreated : 5/15/2013 9:30:59 AM
Chad -
Hi,
why SAP system allows to create recordinfo for material groups ?
RegardsInfo record record contains following information.If you create next time with the same material group it pulls all existing data and will update to currently created PO for reference.
Units of measure in which materials are ordered from the vendor
The applicable reminder levels
Prices and Conditions with validity period (Present and Future)
Applicable Tax Code
Planned Delivery Time
Standard & Maximum Quantity
Tolerance limits for over-deliveries and under-deliveries
Number of Last Purchase Order or Quotation
Text
Vendor evaluation data
An indicator for showing vendor as regular vendor for the material
The vendor sub-range to which the material belongs
The availability period during which the vendor can supply the material -
Requirement:
How to allow Airwatch MDM access to the Captive-Portal guest users in pre-authentication role for Android and Blackberry devices?
What is Airwatch MDM?
Airwatch MDM is Mobile Device Management. The Airwatch is an enterprise which helps to manage and secure data traveling through the mobile devices like Laptops, Tablets, Android, iPhones, iPads etc.
Solution:
Why we need to allow access to Airwatch MDM?
The network administrator can force the guest users to register to Airwatch MDM before they get authenticated and access the internet. So that the network administrator could manage the guest devices through Airwatch Management tool. This can be achieved by CPPM server. To download the Airwatch MDM app and register with the Airwatch MDM server certain domains should be permitted in the captive portal pre-authentication role. This KB provides the configuration steps to allow the guest users to download the Airwatch MDM app and register with the Airwatch MDM server.
Configuration:
Below is the configuration
Configuration steps:
1. Create the following netdestinations
netdestination Airwatch
name *.awagent.com
name *.awmdm.com
name air-watch.com
netdestination Google-Play
name android.clients.google.com
name .ggpht.com
name gstatic.com
name accounts.google.com
name clients1.google.com
name clients2.google.com
name clients3.google.com
name clients4.google.com
name i.ytimg.com
name google-analytics.com
name .1e100.net
name android.l.google.com
name mtalk.google.com
name clients.l.google.com
name googleapis.com
name gvt1.com
netdestination BlackBerry
name *.blackberry.com
2. Now define the rules in the session acl and map it to the pre-authentication Role of the captive portal.
ip access-list session Airwatch_Access
any alias Airwatch svc-http permit
any alias Airwatch svc-https permit
ip access-list session Google-Play-Store
any alias Google-Play any permit
ip access-list session BlackBerry-Access
any alias BlackBerry any permit
3. Now map the session ACLs to captive-portal pre-authentication Role as follows
user-role Guest-Pre-Auth-Role
access-list session Airwatch_Access
access-list session Google-Play-Store
access-list session BlackBerry-Access
access-list session logon-control
access-list session captiveportal
4. Now whitelist the list of domain names in the Captive Portal profle
aaa authentication captive-portal Airwatch-Captive-Portal-Profile
white-list Airwatch
white-list Google-Play ------------>Netdestinations where you defined the Domains.
white-list BlackBerry
Verification
Now the user will be placed under the "Guest-Pre-Auth-Role" before the authentication. The user can now go the Google Play-Store or BlackBerry Appworld to download the Airwatch MDM and register to Airwatch Management Server.Thanks so much getting these names listed out. I have been working on this very issue for a few weeks and was basing my firewall rules on IP's. It was not going well. Now access is working and testing can commence! Thanks,Chris
-
Lync Mobile for external users not working
Hello,
We have Lync Server Enterprise pool with 2 front end server, 2 edge server & TMG for reverse proxy.
PC client internally & externally working. Internal mobile users are working. But not working for external mobile users.
I used 2 tools to check this.
Web based connectivity analyser, it runs without any error.
But when I use installed version of lync connectivity analyser its throws error that. Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.mydomain.com
Also, I am able to download a .json file when you access
https://lyncdiscover.mydomain.comHello,
Sorry for late response. My TMG server was not functioning, now it is working for lync mobile is still having problem. I am pasting the lync analyser full reports:
Network access: NetworkAccessExternal
Logging test parameters:
SIP Uri: [email protected]
User Name:
Discovery Type: Automatic Discovery
Selected client: ApplicationLyncMobile2013
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
Sending HTTP request to
https://lyncdiscoverinternal.contoso.com/[email protected]
Cookie found in autodiscover response: StatusCode: 403, ReasonPhrase: 'Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. )', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Length: 2040
Content-Type: text/html
Autodiscover: SendRequest(): the URL
https://lyncdiscoverinternal.contoso.com/[email protected] couldn't be connected. Complete HTTP headers:\r\n Connection: close
Pragma: no-cache
Cache-Control: no-cache
Couldn't connect to URL
https://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
System.Exception: Couldn't connect to URL
https://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.contoso.com/
Starting automatic discovery for unsecure (HTTP) internal channel
Sending HTTP request to
http://lyncdiscoverinternal.contoso.com/[email protected]
Cookie found in autodiscover response: StatusCode: 403, ReasonPhrase: 'Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. )', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Length: 2040
Content-Type: text/html
Autodiscover: SendRequest(): the URL
http://lyncdiscoverinternal.contoso.com/[email protected] couldn't be connected. Complete HTTP headers:\r\n Connection: close
Pragma: no-cache
Cache-Control: no-cache
Couldn't connect to URL
http://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
System.Exception: Couldn't connect to URL
http://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured internal channel against
http://lyncdiscoverinternal.contoso.com/
Starting automatic discovery for secure (HTTPS) external channel
Sending HTTP request to
https://lyncdiscover.contoso.com/[email protected]
Cookie found in autodiscover response: StatusCode: 200, ReasonPhrase: 'OK', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: Keep-Alive
Pragma: no-cache
X-MS-Server-Fqdn: SGRFLYNC1.contoso.com
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Mon, 24 Nov 2014 13:36:49 GMT
Server: Microsoft-IIS/8.0
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Content-Length: 1065
Content-Type: application/vnd.microsoft.rtc.autodiscover+xml; v=1
Expires: -1
Parsing the response for URL
https://lyncdiscover.contoso.com/[email protected]. Full response: <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="External"><Root><Link token="Domain" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=contoso.com"
/><Link token="User" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=contoso.com"
/><Link token="Self" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=contoso.com"
/><Link token="OAuth" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=contoso.com"
/><Link token="External/XFrame" href="https://lyncdiscover.contoso.com/Autodiscover/XFrame/XFrame.html" /><Link token="Internal/XFrame"
href="https://lync.contoso.com/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://lyncdiscover.contoso.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
Autodiscover URL
https://lyncdiscover.contoso.com/[email protected] redirected to
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=contoso.com
Sending HTTP request to
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
Cookie found in autodiscover response: StatusCode: 403, ReasonPhrase: 'Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. )', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Length: 2040
Content-Type: text/html
Autodiscover: SendRequest(): the URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] couldn't be connected. Complete HTTP headers:\r\n Connection: close
Pragma: no-cache
Cache-Control: no-cache
Couldn't connect to URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] (HTTP status code Forbidden)
System.Exception: Couldn't connect to URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] (HTTP status code Forbidden)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<ParseResponse>d__16.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured external channel against
https://lyncdiscover.contoso.com/
Starting automatic discovery for unsecure (HTTP) external channel
Sending HTTP request to
http://lyncdiscover.contoso.com/[email protected]
Cookie found in autodiscover response: StatusCode: 200, ReasonPhrase: 'OK', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: Keep-Alive
Pragma: no-cache
X-MS-Server-Fqdn: SGRFLYNC1.contoso.com
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Mon, 24 Nov 2014 13:36:49 GMT
Server: Microsoft-IIS/8.0
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Content-Length: 1065
Content-Type: application/vnd.microsoft.rtc.autodiscover+xml; v=1
Expires: -1
Parsing the response for URL
http://lyncdiscover.contoso.com/[email protected]. Full response: <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="External"><Root><Link token="Domain" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=contoso.com"
/><Link token="User" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=contoso.com"
/><Link token="Self" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=contoso.com"
/><Link token="OAuth" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=contoso.com"
/><Link token="External/XFrame" href="https://lyncdiscover.contoso.com/Autodiscover/XFrame/XFrame.html" /><Link token="Internal/XFrame"
href="https://lync.contoso.com/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://lyncdiscover.contoso.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
Autodiscover URL
http://lyncdiscover.contoso.com/[email protected] redirected to
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=contoso.com
Sending HTTP request to
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
Cookie found in autodiscover response: StatusCode: 403, ReasonPhrase: 'Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. )', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Length: 2040
Content-Type: text/html
Autodiscover: SendRequest(): the URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] couldn't be connected. Complete HTTP headers:\r\n Connection: close
Pragma: no-cache
Cache-Control: no-cache
Couldn't connect to URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] (HTTP status code Forbidden)
System.Exception: Couldn't connect to URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] (HTTP status code Forbidden)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<ParseResponse>d__16.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured external channel against
http://lyncdiscover.contoso.com/
None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
Automatic discovery of the Lync server failed. Please verify the server requirements at
http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully. -
Deny IPSEC and allow Clientless VPN for a group
Hello,
I'm trying to block the L2TP over IPSEC,and allow Clientless VPN for a group from the Active Directory (with a radius server).
But I've failed to deny the ipsec access...
I have two groups that have a differents class.25 attributes:
CN=IPSEC_user;
CN=WebSSL_user;
And I want deny the ipsec acces for CN=WebSSL_user but I want allow this one to access Clientless SSL VPN! and vice versa forCN=IPSEC_user;
For the group IPSEC_user there is no problem (I've disabled almost everything in a DAP), But for CN=WebSSL_user I don't know how to deny the IPSEC access.Oh I completely overlooked that, you were using CN instead of OU. Note that the CN is ignored by the ASA, so only the OU is used to define the group-policy.
I'm just guessing now, but if you meant to assign a tunnel-group, that is not possible, because the radius authentication only takes place after a tunnel-group has already been selected (since authentication is a property of the tunnel-group).
In this kind of scenario that is usually not a problem, it is ok for all users to even connect to the same tunnel-group, and just get different group-policies.
If for some reason you do want to have 2 tunnel-groups and want to prevent that users connect to the 'wrong' one, then you can use the group-lock feature for that - this will deny the connection if the user connected to the wrong TG.
i.e.
group-policy WebSSL_user attributes
vpn-tunnel-protocol webvpn
group-lock value myWebSSLTunnelGroup
hth
Herbert -
I created a new apple id for my iphone and ipad which work great and allow me to access Icloud. on my macbook air I can't get it to use my new apple id for icloud. It keeps going back to my old apple id and doesn't afford me to alter it. I use system preferences-icloud and it just wants to verify the old apple id but doesn't afford me the opportunity to delete teh account or edit it like the iphone5 and ipad. Help?
Welcome to the Apple Community.
You need to use the sign out option on the left side. -
How can I transfer music from my home PC in my iTunes library to my iPhone for without Internet access will home sharing allow me to access my iTunes library from my iPhone 4 without Internet
Why don't you just sync it to your phone?
-
Is there an app for the ipad that will allow you to access your mac.
Is there an app for the ipad that will allow you to access your mac via wifi or cell network.
Yep, two of the most popular apps are "LogMeIn Ignition" and "iTeleport." Check them out, they'll both set you back by about 30$ though.
-
Error while accessing application of Mobile Sales for Handhelds
Hi all,
I am working with Mobile Sales for Handhelds. I downloaded a source code for "Mobile Sales & Service for HH using CRM 4.0 SP08" from SAP note 824427. After creating a WAR file out of this code and assigning it to the user through web console successfully, I synchronized. But when I tried to access the application by the link, I get a Included servlet error. The stack trace is as follows :
Included servlet error: 500
Location: /CRMHHSALES/start
Error Location: /CRMHHSALES/main/BaseMenu.jsp
Internal Servlet Error:
org.apache.jasper.JasperException: Unable to compile class for JSPNote: sun.tools.javac.Main has been deprecated.
C:\Program Files\SAP Mobile Infrastructure\work\localhost_8080%2FCRMHHSALES\_0002fsystem_0002fError_0002ejspError_jsp_0.java:15: Class com.sap.crm.handheld.logic.gui.Skin not found in import.
import com.sap.crm.handheld.logic.gui.Skin;
^
C:\Program Files\SAP Mobile Infrastructure\work\localhost_8080%2FCRMHHSALES\_0002fsystem_0002fError_0002ejspError_jsp_0.java:16: Class com.sap.crm.handheld.core.utils.EncodingHelper not found in import.
import com.sap.crm.handheld.core.utils.EncodingHelper;
^
C:\Program Files\SAP Mobile Infrastructure\work\localhost_8080%2FCRMHHSALES\_0002fsystem_0002fError_0002ejspError_jsp_0.java:17: Class com.sap.crm.handheld.logic.gui.Skin not found in import.
import com.sap.crm.handheld.logic.gui.Skin;
^
3 errors, 1 warning
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:282)
at org.apache.jasper.servlet.JspServlet.doLoadJSP(JspServlet.java:612)
at org.apache.jasper.servlet.JasperLoader12.loadJSP(JasperLoader12.java:146)
at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:542)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:258)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:268)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:429)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:500)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
at org.apache.tomcat.core.Handler.service(Handler.java:287)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.facade.RequestDispatcherImpl.doInclude(RequestDispatcherImpl.java:400)
at org.apache.tomcat.facade.RequestDispatcherImpl.include(RequestDispatcherImpl.java:270)
at com.sap.crm.handheld.core.webtools.ControllerServlet.displayPage(Unknown Source)
at com.sap.crm.handheld.core.webtools.ControllerServlet.saveStateAndDisplayPage(Unknown Source)
at com.sap.crm.handheld.core.webtools.ControllerServlet.handleRequest(Unknown Source)
at com.sap.crm.handheld.core.webtools.ControllerServlet.handleRequestWrapper(Unknown Source)
at com.sap.crm.handheld.core.webtools.ControllerServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:402)
at org.apache.tomcat.core.Handler.service(Handler.java:287)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
at java.lang.Thread.run(Thread.java:534)
Can anybody help me in this issue?
Thanks in advance.
Saptak.Hi Saptak Kulkarni ,
<<<
org.apache.jasper.JasperException: Unable to compile class for JSPNote: sun.tools.javac.Main has been deprecated.
C:\Program Files\SAP Mobile Infrastructure\work\localhost_8080%2FCRMHHSALES\_0002fsystem_0002fError_0002ejspError_jsp_0.java:15: Class com.sap.crm.handheld.logic.gui.Skin not found in import.
import com.sap.crm.handheld.logic.gui.Skin;
^
C:\Program Files\SAP Mobile Infrastructure\work\localhost_8080%2FCRMHHSALES\_0002fsystem_0002fError_0002ejspError_jsp_0.java:16: Class com.sap.crm.handheld.core.utils.EncodingHelper not found in import.
import com.sap.crm.handheld.core.utils.EncodingHelper;
^
C:\Program Files\SAP Mobile Infrastructure\work\localhost_8080%2FCRMHHSALES\_0002fsystem_0002fError_0002ejspError_jsp_0.java:17: Class com.sap.crm.handheld.logic.gui.Skin not found in import.
import com.sap.crm.handheld.logic.gui.Skin;
^
>>>
Check whether u have imported these classes or not,,
import com.sap.crm.handheld.logic.gui.Skin;
import com.sap.crm.handheld.core.utils.EncodingHelper;
import com.sap.crm.handheld.logic.gui.Skin;
these classes in your JSP file during modification ..
i think u have used these all external classes in your JSP files without importing these classes...
If u have imported these class files , then check , u have properly set path for these library (jar files) in the MI client itself.
<b>If ur MI applications are using some extra jar files , then in the client device , that jar files must present in the lib directory of MI installation</b>.
<b> These jar files must be set in the classpath while starting the MI client...</b>
just refer this forum for setting classpaths in the client device for additional jar files ...
Re: External API in MI application
Regards
Kishor Gopinathan -
I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?
Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love
Maybe you are looking for
-
Error message: "playlists selected for updating no longer exist"
I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message: "Cannot be updated because all of the playlists selected for updating no longer exist.
-
I recently had a Mail server crash and the RAID it lie on did its rebuild. Afterwards all my accounts seem to be working fine except one. I have an IMAP account setup, locally administered. The user can log in with their credentials from a client sof
-
Why is my iPad 2 no longer able to screen share to external monitor?
I used to connect my ipad 2 to various shared displays via HDMI and VGA converter cords quite frequently. The other day I connected and no signal is found...tried multiple screens, projector and different cords. Convinced its my iPad. Fixable? Hardwa
-
Unplayed Episodes/Stations- how to choose to begin playing oldest unplayed episode?
The release notes say this is an option but I can't figure out how. (The only options in settings are "my podcast" order, most recent and manual- but I don't see any way to manually adjust the order, either.) Also, apparently there is no way to get a
-
I am not found of "avchd" format at all. very messy codec, I shot a wedding film In AVCHD 1920x1080i results are fine but clients are not demanding for BLU-RAY they want DVD. Should i create AVCHD project in PPRO5.5 (i dont want to) very heavy to wor