Alot of Lockups from numerous OS X Applications
I'm getting a lot of lockups from different applications on my MacBook Pro. It's not that it happens all the time, but any time you throw something at it that's processor intensive it just halts. If you try to cancel the action you just get the spinning wheel. After that point, I can't even get to the Force Quit menu and have to key it in as a keyboard command. Even then sometimes I can be waiting up to 2 minutes to just get the Force Quit Window to show up.
It's becoming sort of a burden for me, I don't have these issues with my desktop (Win 7). I guess I'm just looking for some tips here, I've done most of the maintenance suggested including repairing permissions. Is there anything else that can be done or do I just have to wait for an update?
I'm slightly disappointed at this point, Apple has a reputation for software that just runs... but I'm finding it's applications to be far less stable compared to other software. I want to use their software, I think most of it is designed quite well... but I need it to be stable at all times if I'm gonna use it.
Hi mightymilk;
In your profile you list two Macs.
Which one are you using when you get the problem.
Please provide more details on the custom assembled Mac. TTBOK my knowledge that is not legally possible.
Allan
Similar Messages
-
How to store multiple files from SAp in to Application server?
Hi Guys,
Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
Any Logic or Code for how to do is welcomed.
plz help me urgently.
Thanks,
GopiHi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
DIRNAME(200) TYPE c, " name of directory.
sp_name(100) TYPE c," name of entry. (may end with *)
END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
dirname(75) TYPE c, " name of directory.
aliass(75) TYPE c, " alias for directory.
svrname(75) TYPE c, " svr where directory is availabl
sp_name(75) TYPE c, " name of entry. (may end with *)
sp_cs(10) TYPE c, " ContainsString pattern for name
END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = in_file
"FILETYPE = 'BIN'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
move g_tmp_file_path to in_file.
h_destin = ''.
SPLIT g_tmp_file_path at '\' into table itab.
loop at itab into g_tmp_file_path.
h_destin = g_tmp_file_path.
endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = '/BI0/PCO_AREA'
lfieldname = 'CO_AREA'
IMPORTING
dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'SP_NAME'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'destin'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = searchpoints
FIELD_TAB = lt_dfies
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
WHEN 'ORA'.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'ADA'.
CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'INF'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
WHEN 'DB6'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
ID 'VALUE' FIELD searchpoints-dirname.
IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
ELSE.
EXIT.
ENDIF.
WHEN OTHERS.
EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = sy-uname.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = 'all'.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
ID 'VALUE' FIELD programfiles_path.
IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
ENDIF.
CONCATENATE programfiles_path '\SAP\hostctrl'
INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
IF sy-opsys = 'Windows NT'.
searchpoints-dirname = '.\'.
ELSE.
searchpoints-dirname = './'.
ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
h_ind = sy-tabix.
IF searchpoints-sp_name IS INITIAL.
DELETE searchpoints INDEX h_ind.
ENDIF.
ENDLOOP.
ENDFORM. -
Re: [iPlanet-JATO] from a non jato application to jato application
Without getting into the details, the session id is passed around in a
cookie, but once you leave your JATO app "sandbox", you no longer have
access to the same session. This is not a JATO limitation, but a J2EE
spec constraint. The war file creates a Servlet Context. Other servlet
contexts have separate session sandboxes. If you deployed all your apps
within the same war file, your sessions would be mutually accessible.
or
You could do something like use a Session EJB and pass its reference
between apps I suppose.
Also, see JATO Tip #0011 for forwarding to a "non-JATO" target.
Hopefully, my reply will open up a conversation for more solutions,
ideas, if what I have proposed is insufficient.
craig
raju_jato wrote:
how can we forward a request from a non jato application(build using
jsp and servlet) to a jato application and back and have only one
session for both the applications.
thanks
For more information about JATO, including download information, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jspWithout getting into the details, the session id is passed around in a
cookie, but once you leave your JATO app "sandbox", you no longer have
access to the same session. This is not a JATO limitation, but a J2EE
spec constraint. The war file creates a Servlet Context. Other servlet
contexts have separate session sandboxes. If you deployed all your apps
within the same war file, your sessions would be mutually accessible.
or
You could do something like use a Session EJB and pass its reference
between apps I suppose.
Also, see JATO Tip #0011 for forwarding to a "non-JATO" target.
Hopefully, my reply will open up a conversation for more solutions,
ideas, if what I have proposed is insufficient.
craig
raju_jato wrote:
how can we forward a request from a non jato application(build using
jsp and servlet) to a jato application and back and have only one
session for both the applications.
thanks
For more information about JATO, including download information, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
Regaring file from FTP server to application server
Hi frnds,
Below is my code where i am transferring Presentation server file to FTP server.
Now i want to transfer that file from FTP server to application server.
any help. below i am providing my code.
<code>
*& Report demo
report z_demo_ftp.
Variables declaration
data : mi_handle type i,
pwd type char30,
slen type i,
key type i value 26101957,
it_file2 type filetable,
w_file2 like line of it_file2,
l_rc type i,
v_index type i,
v_file(30) type c,
v_path(100) type c,
v_path_tmp(100) type c.
*Internal table declaration
data: begin of mtab_data occurs 0,
line(132) type c,
end of mtab_data.
Selection scree parameters
parameters: p_file type string default 'C:\'.
Get the file path
at selection-screen on value-request for p_file.
data: p_file1 type string.
p_file1 = p_file.
call method cl_gui_frontend_services=>file_open_dialog
exporting
default_filename = p_file1
changing
file_table = it_file2
rc = l_rc
exceptions
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
read table it_file2 into w_file2 index 1.
p_file = w_file2-filename.
clear w_file2.
refresh it_file2.
split p_file at '\' into table it_file2.
describe table it_file2 lines v_index.
read table it_file2 into w_file2 index v_index.
concatenate 'put' w_file2-filename into v_file separated by space.
delete it_file2 index v_index.
clear w_file2.
loop at it_file2 into w_file2.
if sy-tabix = 1.
v_path = w_file2-filename.
endif.
if sy-tabix ge 2.
concatenate v_path '\' w_file2 into v_path.
endif.
endloop.
concatenate 'lcd' v_path into v_path_tmp separated by space.
endif.
Start of selection
start-of-selection.
pwd = 'file456'.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
exporting
source = pwd
sourcelen = slen
key = key
importing
destination = pwd.
Connect to FTP
call function 'FTP_CONNECT'
exporting
user = 'client'
password = pwd
host = 'saturn'
rfc_destination = 'SAPFTP'
importing
handle = mi_handle
exceptions
not_connected = 1
others = 2.
if sy-subrc = 0.
Excute FTP command
call function 'FTP_COMMAND'
exporting
handle = mi_handle
command = 'cd staff
tables
data = mtab_data
exceptions
tcpip_error = 1
command_error = 2
data_error = 3
others = 4.
Excute FTP command
call function 'FTP_COMMAND'
exporting
handle = mi_handle
command = v_path_tmp
tables
data = mtab_data
exceptions
tcpip_error = 1
command_error = 2
data_error = 3
others = 4.
Excute FTP command
call function 'FTP_COMMAND'
exporting
handle = mi_handle
command = v_file
tables
data = mtab_data
exceptions
tcpip_error = 1
command_error = 2
data_error = 3
others = 4.
if sy-subrc = 0.
loop at mtab_data.
write: / mtab_data.
endloop.
endif.
endif.
*FTP disconnect
call function 'FTP_DISCONNECT'
exporting
handle = mi_handle
exceptions
others = 1.call function 'FTP_DISCONNECT'
exporting
handle = mi_handle
exceptions
others = 1.
end-of-selection.
</code>
so what more code shuld i write.
regards,
kamalHi Che Eky ,
Actually the above code is for putting the presentation server file to FTP Server.
But now i need to Put the same file present in the FTP server to Application server.
So any help or code which will be helpful.
regards,
kamal -
Copy File from Presentation Server to Application Server in Background
Hi,
I need to copy Image file from Presentation Server to Application Server.
The below given code is workking fine in Foreground but whenevr I am trying to execute in Background, the job is cancelled and I am getting a dump.
data : wa_source type string,
wa_destination type string.
wa_source = 'C:\PARBIND.BMP'.
wa_destination = 'D:\PARBIND.BMP'.
start-of-selection.
call method cl_gui_frontend_services=>file_copy
exporting
source = wa_source
destination = wa_destination
* overwrite = SPACE
* EXCEPTIONS
* cntl_error = 1
* error_no_gui = 2
* wrong_parameter = 3
* disk_full = 4
* access_denied = 5
* file_not_found = 6
* destination_exists = 7
* unknown_error = 8
* path_not_found = 9
* disk_write_protect = 10
* drive_not_ready = 11
* not_supported_by_gui = 12
* others = 13
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
In backgound Error is....
Exception condition "CNTL_ERROR" raised.*
Any solution is appreciated.
Thanks
ArbindHi Arbind,
Just realize... when you run it in foreground, you have a foreground to capture the file location. so it runs fine..
but when you are running it in background, there is no foreground to check that is no gui present... how can it check where the C:\.... location is??
no need of reading any oss note... just see.. the name is cl_GUI_FRONTEND_service.. its only for front end..
u need open dataset, read dataset, close dataset kind of things while running in background. or RFCs to read the file... (search SDN). -
File copy from SHARED folder to Application server
Hi
I have a file which is in a shared folder. My requirement is to copy this file into the application server.
The function module C13Z_FILE_UPLOAD_BINARY is working fine with local files. But I could not use it to copy the file in shared folder.
Please help me out.
Points will be awarded for sure !!
Thankshi,
use OPEN DATASET ... TRANSFER ... CLOSE DATASET to transfter the data on to the required file path ... else use transaction
CG3Z - to upload file from presentation server to application server.
Regards,
Santosh -
When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!
hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
Files from FTP server to Application server
Hi All,
I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface. Actually the process is already established at clientsite for placing master data files like product, plant etc from FTP server to App server through FTP adapter. Now my requirement is to move transaction data file with completely different structure as master data to App server. If we place these trasaction data file in same folder/directory as master data files does SAP XI pick this file also. If not what are the steps I need to follow to achieve this. I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
Right now our process for master data files is SAP XI picks the files and deletes the file from FTP server folder. The master data file names are plant_attr.csv, product_attr.csv etc and transcation data file name is salestrasactiondata.csv. I need to move these files to application server on daily bases.
I appreciate your help .
Regards
Bob.> I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface.
Hello Bob,
Yes it is possible.
There can be two ways of doing it.
1. N:1 mapping, BPM will require for this.
N:1 Mapping refer this blog
IDOCs (Multiple Types) Collection in BPM
BpmPatterns CollectMerge
part1 BPM with Patterns explained Part-1
part2 BPM with Patterns explained Part-2
Second option
Create 3 scanarios in integration directory and correspondingly in integration repositoy create different data types, message types, mappings & interface mappings and then in each of scenario us different message interface and interface mapping.
> I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
>
If you are using N:1 scenario then use *.csv in your sender adapter under file name parameter and then all the files will be picked up from same directory.
If you are using second option (3 different scenarios) then also you can pick the different files from same directory. You will be having 3 sender adapters in this case, So, one for picking master data, and another for product data and the last one for transaction data.
So, in case of master data use "plant_*.csv" as a file name and directory name.
In case of product data, use "product_*.csv " as a file name and source directory will remain same.
similarly do it for transaction data.
So by this way all 3 sender adapters will perform their job to pick the different files from same source directory.
Regards,
Sarvesh -
Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System 0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue. -
Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?
jerryone1942 wrote:
Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?
It depends upon the capabilities of your printer. If you have an HP printer with a photo tray then the Photo app will print to whatever size you load in to that tray.
There's some more information here:
Using AirPrint to Print Various Photo Sizes
With other printers the user is given a choice from the printer's loaded paper sizes. You can see an example of that here:
The Many Faces of the iOS Print Panel -
Retrieve data from a non-peoplesoft application using HTTP Get
I need to retrieve data from a non-peoplesoft application. They want us to submit a HTTP GET request to their URL with a series of parameters. I am thinking about using HTTP Targert connector to accomplish this. Does anyone have sample peoplecode?
Currently we are on 8.51.10 Tools...
If there is any better way .. please let me know ..I have used HTTP Get to get XML file from a government sanction list by hitting URL http://www.treasury.gov/ofac/downloads/sdn.xml
There is a delivered PS program that does that for vendor sanctions. I had to get the online setup correctly by creating a new custom Node with HTTP Target Connector. The program name is BSP_IMPORT. The below code is responsible for the calling the node and retrieving the data. Play around with the code below see if you can get it to meet your needs.
BSP_IMPORT_AET.BANKNODE.Value is just the custom external code that I created.
PMT_FLAT_FILE_INBOUND message is just a none rowset based message to use the web service call.
Local TR:FileUtilities:FTP &oFTPUtil = create TR:FileUtilities:FTP();
+/* HTTP */+
+/*******************************************************************************/+
Local Message &msgHTTP;
Local Message &msgResult;
+&msgHTTP = CreateMessage(Message.PMT_FLAT_FILE_INBOUND);+
+&oFTPUtil.PopulateFTPGetIBInfo(&msgHTTP, BSP_IMPORT_AET.BANKNODE.Value);+
+&msgResult = %IntBroker.ConnectorRequest(&msgHTTP);+
+/* check to see if the file is wrapped */+
+&strAllLines = &msgResult.GenXMLString();+
+&strAllLines = Substitute(&strAllLines, Char(26), " "); /* Added this line to remove invalid characters */+
+/*******************************************************************************/+
Edited by: Maher on Mar 20, 2012 3:28 PM -
How to create a .mdf SQL Server database from a Data-Tier Application file that has data?
This is a noob question, though I do use SQL Server databases all the time with Entity Framework when I code in C# using Visual Studio 2013. The development environment is found below at [A]. I am trying to make a clone of a SQL Server 2008 R2
database (.mdf) that exists online. I can read, connect and work with this database in Visual Studio 2013, but I wish to make a local copy of the database, as an .MDF file. Somewhere in my notes I have a way of creating a local copy from
an online database when using Visual Studio but I forgot how (it seems, reviewing my notes, that it deals with ADO.NET which is deprecated in Visual Studio 2013 these days, or so it seems). So I'm looking for another way. What I did was create
(or export) a "Data-Tier Application File" from the online SQL Server database, with data, and it seems to have worked in that this Data-Tier Application file exists on my hard drive and seems to have data in it ("SQL Server Replication Snapshot"
is the format it seems). It contains skeleton code to create a database, but when I tried to execute it with SQL Server 2014 Management Studio, I got a bunch of errors.
So my question is:
1) Can I somehow create a .MDF SQL Server Database from an Data-Tier Application file that has data? What tool do I use? I saw this link, http://social.technet.microsoft.com/wiki/contents/articles/2639.how-to-use-data-tier-application-import-and-export-with-a-windows-azure-sql-database.aspx
and it relates to Azure, but is there a tool for C#Visual Studio 2013, standalone?
2) If there's an easy way to create a .mdf SQL Server Database file from an online file, within SQL Server Management Studio? I don't think so, since it would require Administrator permissions on the online server, which I don't have. I have permission
to read, update, delete the online database file, but strangely not to download it (the service I use has a tool for backup, but not for download).
3) same question as 2), but for Visual Studio 2013? I don't think so, since I notice none of the templates even mentions ADO.NET anymore, but instead they go with Entity Framework. Using EF I can of course do anything I want with the online database
(CRUD), but it remains online. Maybe there's a switch to make a local copy? I guess I could write a short program to suck all the data out of the online database and put it into a new, duplicate database having the same tables, that I create on
my localhost, but my question here is if there's an easier way than this, maybe a tool or command I can run from inside Visual Studio?
Any advice on any of the above questions is appreciated.
Thank you,
Paul
[A] Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Microsoft Web Developer Tools 2013 2.0.40926.0
SQL Server Data Tools 12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools 1.0
Windows Azure Mobile Services ToolsThanks but these links are too general to help.
"2. what do you mean by online file?" - I mean the SQL Server database file is on a remote web server that I rent from, but I am not the administrator of. I can access my database using SQL Server Authentication, but nothing more.
Paul
What do you mean by too general? It explains on how you can use data tier application to create and deploy databases
May be this will help you to understand better
http://www.databasejournal.com/features/mssql/article.php/3911041/Creating-Data-Tier-Applications--in-SQL-Server-2008-R2.htm
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Hi, My name is Bheki Yende
I'm experiencing a problem with an app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on this pls.
This is an inconvenience, I don't understand why I have to contact the developer for a faulty product in your store.
I've paid iTunes to get this, so iTunes must fix this problem for me or give my money back.
ThanksThis is a user forum, you are not speaking to Apple here.
You will need to contact iTunes support here, regarding this issue. They will usually respond within 24 hours. -
Invoking SOLMAN WS from a NON-SAP application
Hello All,
Has any one accessed the SAP SolMan web services from a non-sap application ? For my project, I need to talk to solman through its exposed operations as defined in the WSDL file
http://mycompany.com:8003/sap/bc/srt/rfc/sap/ict_service_desk_api?wsdl
When I invoke this WS through eclipse, after taking in the UID & PWD, it is returning appropriate values for:
RequestSystemGuid
RequestGuid
Getpossiblevalues
It fails for all other operations. For e.g. ListUnclosedIncidents returns and error called :
ErrorCode (unsignedByte): 13
Similary for the operation 'ReadCompleteIncident'
What is it that needs to be done to surmount this error ? Any pointers, suggestions ?
Thanks
KarthikHi, did you accomplish to solve your problem using the list unclosed incidents operation?
Best Regards
Nasoft -
How to execute a BI query/view from a web dynpro application?
Hi all,
I am trying to connect to a BI system from a Web Dynpro application. I have to execute a view/query and process the output in my application. Please guide me about how to establish the connection to the BI system from my web dynpro application and then execute the query/view.
I have tried executing/modelling the BI query/view using Visual Composer but I get an error saying 'QueryView Instantiation failed' when I try to drag the view/query on to the design board.
Please guide me and help me achieve this.
Thanks & Regards,
KishanHi Kishan,
Define system for BI in portal and define JCo destination, then from WDJ application use can query BI.
Create the Technical System and connect with JCO Destinations
or
Connecting through the BI Connecters (ex: XMLA Connecter)
Refer below link:-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
In this document you will get details related to connector and other admin activity.
Hope this may help you.
Deepak!!!
Maybe you are looking for
-
IPod not recognized by Windows, previously updated once on Mac
I've had this 30gb iPod for about a week, and have only been able to update it once. I updated it on my sister's iBook for convinence, and when I tried to update it on my Compaq Presario, it didn't recognize it and will only charge after I have reset
-
Q190 unable to get video from HDMI
I originally set up my Q190 using VGA out to the monitor. After purchasing a HDMI to DVI cable and connecting it, I have been unable to get any video to display on the monitor via the HDMI port. I have rebooted several times, checked every setting I
-
Blog like alternative for iweb for postin new material?
I'm a little shocked I didn't think of this until now but on my website the main page is broken down into 2 columns. The main column works just like a blog where pictures are posted to stories and it's suppose to be updated almost daily. Problem is t
-
Hi Can any one tell me how to make a select option in the screen for a filed in the module pool. Regds.
-
Linux doesn't seem to know battery status
I have a sony vaio vgn-p11z. The first thing I mentioned was the broken status display of notion after an update, but this wasn't that bad. acpitool says there is no battery present, acpi however displays valid data about battery 0. The thing that re