Altering the report's format without destroying the report layout....{solv}

Hi,
I have developed a tabular report and the layout (lines, rectangles... etc as customer wants) ....
Now , i want to alter only the report style.... that is to change it to group left....
Is it possible... to select the group fields and the fields displayed in the report without redeveloping the report UI (lines , rectangles... e.t.c).
I have tried the report wizard... but the layout destroyed... and have to do the UI from the beginning.....
NOTE : I use Dev10g
Thanks ,
Sim

Hi Sim,
Group Left or Group Above means that you are grouping for 1 or more fields.
In the Data model, you will have to create a new group and drag the group fields to this new group.
In the Layout, you will need to add a new repeating frame below all the other repeating frame, frames, etc. ie. create a repeating frame over existing objects. You may need to move all existing objects down and to the right so that there is enough room to create a new repeating frame over these objects. With the repeating frame selected, from the Arrange Menu, select Send to back (F6) or Move Backwards (F8) several times so that the new repeating frame is below all the objects from the tabular layout.
Also, fix up the source property for the repeating frame. Create a new field(s) inside this new repeating frame for your group left field(s).
Good luck.
John

Similar Messages

  • Computer iMac7,1 has been giving sundry problems for some time. Within the last six weeks I have reinstalled the OS (Snow Leopard), without affecting the overall contents of the hard drive. ±3 weeks later the problems became more serious and I again reins

    Computer iMac7,1 has been giving sundry problems for sometime. Within the last six weeks I have reinstalled the OS (Snow Leopard),without affecting the overall contents of the hard drive.
    ±3 weeks later the problems became more serious and I againreinstalled the OS and installed OS 6.6.7 from the internet.
    I used the option to restore from the external backup driveand went back some time as it was my intention to reinstall individualcomponent in an attempt to find out where the problem might lie. This hasintroduced an entirely new problem! If I open Time Machine from the desktop itappears that all backups from late 2009 to June 2011 are intact. But, in thiscase there are none of the restore functions &c on screen. The latter areonly shown if Time Machine is opened from the menu bar or from the dock but, inthis case, available are only backups in late 2009!
    I also opened the Apple Hardware Test in an attempt toestablish the nature of the problem. The ‘quick’ version said there’s nothingwrong; the more detailed one reported “Error detected, 4HD/11/40000004.” I haveagain tried to employ this test but nothing I do can induce it to open!!!
    What to do? I need help urgently and would appreciate anyadvice that offers solutions to the problem.

    To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

  • How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

    How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

    Hi Pawan,
    You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
    ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
    processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
    Follow MSDN-
    http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
    http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
    I hope this helps.
    Rachit
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How can I transfer music from my old iphone 4 to the new iphone 5S without having the music synced to my laptop (e.g. my itunes library is empty)?

    How can I transfer music from my old iphone 4 to the new iphone 5S without having the music on the old phone synced to my laptop (e.g. my itunes library on the laptop is empty) ?
    I tried the "Transfer Purchases" option - however this only worked for apps - not sure if I'm missing some sort of setting.
    I do not want to use iCloud as I do not have enough space for my music.
    Thanks!

    You cannot. The music must be in the iTunes library first. See these User Tips:
    Recover your iTunes library from your iPod or iOS device
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

    I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
    I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
    thanks!

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • F110 run the payment run directly without running the proposal run first

    Hello to you all,
    Does any one know I do I block the option to run the payment run directly without running the proposal run first?
    Thanks in advance,
    Yoav

    Hi
    First delete the payment run output by the following :
    Goto Edit on menu bar --> Payment --> Delete Output
    then run the proposal run again and after that process payment run.

  • Manually set up the essbase 11 client (without using the fusion installer)

    Hi All,
    is it possible to install the Essbase 11 client without using the Fusion Installer?
    I tryed to copy the "bin" and "locale" directory from an exisiting installation and set up the ARBORPATH environment variable - without success.
    Did I miss anything? Maybe some Registry entries? Or isn't it possible to set up the essbase client manually?
    Every answer would be appreciated.
    Cheers,
    Martin

    Hi John,
    thanks for the hint that the addin is also available for any version.
    I have an application which uses the C-API (essapinu.dll, essotlnu.dll, ...) and I want to test it with diffrent Essbase Client Versions against diffrent Essbase Servers.
    These are the (client) versions which I want to test:
    EssbaseRtc11110WindowsFiles
    EssbaseRtc11111WindowsFiles
    EssbaseRtc11112WindowsFiles
    EssbaseRtc11113WindowsFiles
    EssbaseRtc9203WindowsFiles
    EssbaseRtc9210WindowsFiles
    EssbaseRtc9301WindowsFiles
    EssbaseRtc9310WindowsFiles
    I hoped it would be enough to replace some directorys on a machine instead of starting a lot of installers.
    Cheers,
    Martin

  • Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    Hi, Alan -
    How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
    You can, but you'll need to expand your cabling a bit.
    You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
    If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
    I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

  • How do i find out what the IEMI number is without having the phone or package?

    how do i find out what the IEMI number is without having the phone or package?

    If you ever backed your iPhone up to your computer, launch iTunes, go to the Preferences, select Devices, and hover your cursor over the backup file for the iPhone. That should show you the IMEI number.
    If not, and you don't have the phone nor the packaging, you'll need to call your cell carrier and see if perhaps they can tell you.
    Regards.

  • When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

    When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

    I suspect that beautify doesn't touch CSS that it is not aware  of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
    Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
    Randy

  • How to keep the watch to display without press the button on my iPod Nano 6th)?

    Dear Guys,
    I have purchased a watchband for my ipod nano 6th recently, overall is okay but i don't know how to keep the watch to display without pressing the sleep/resume button on edge? Also, the screen is not showing the watch immeditaly when I press the button, it shows the music/cd folder, then I need to scroll the screen back to the watch display.  Please help.

    There is no way to keep the display on permanently, as doing so would significantly reduce the overall life of the battery.  It would maybe last only hour, maybe not even.
    As for having your iPod wake up to the watch view, head to Settings -> General -> Time on Wake -> On.
    B-rock

  • Changing the partition format without reinstall the Mac OS X

    Hi,
    Does anyone know how to change the file system format of the partition without needed to reinstall the OS X ?
    E.g. "Mac OS Extended (Journaled)" > "Mac OS Extended (Case-sensitive, Journaled)"
    this link will give an idea of list of file system format available http://images.macworld.com/images/legacy/2006/10/images/content/pickformat.jpg
    The main reason I need this is because of I wish to avoid reinstallation as it take time to install and update to latest patch...
    I have MacBook with 3 partitions with formated to "Mac OS Extended (Journaled)" on all 3 partitions. 1st and 2nd partition installed Mac OS X 10.6 and 10.7, and created an image (by using carbon copy cloner) for each partition and saved it into 3rd partition as backup.
    I tried to below but it doesn't help:
    1. Boot into 10.7.
    2. Erase the 1st partition 10.6, reformat it to "Mac OS Extended (Case-sensitive, Journaled)".
    3. Restore 10.6 image that created previously.
    4. After restore completed, the 1st partition file system format back to "Mac OS Extended (Journaled)".
    Is there's anyway to change the partition file system format without needed reinstall Mac OS X ?

    Or is there any backup tool that it will only back file and folder level but not file system format ??
    That what all backup tools do.
    If so, then I can create a backup image of the existing entire partition file and folder only, then reformat the partition to case-sensitive, then restore back the file and folder...
    Yes, that's what I'm suggesting. Be aware that it's a one-way conversion. Once you have a case-sensitive file system, you generally can't go back to case-insensitive without losing data. I hope you have a good reason for wanting to do this and that you know how to deal with the problems it may cause.

  • Is There A Way To Republish A Report In CMC Without Deleting The Object?

    We're using Business Objects Enterprise 11.5 to manage over 700 reports. Right now, whenever a user requests a change to a report (which happens several times a week) we go into CMC and delete the object completely, and create a new one. This seems pretty wasteful.
    It seems to me like there should be some "Browse" function somewhere that would allow us to grab an updated .rpt file and replace the current one, but for the life of me I can't find it.

    That's a pretty lousy design IMO.
    No comment
    Crystal Reports needs to connect to the CMS, which by default listens on 6400. You can't force it to use another port, unless the CMS also listens on that port.
    As for your IT dept not wanting that port open, the Import Wizard, Publishing Wizard, every client tool needs to connect to the CMS on this port (or the port the CMS listens on).
    The gist is that Crystal Reports will have to connect to the CMS on 6400 (in your case).

  • Is there a way to make the spell check work on the entire web page without making the content editable? Or at least those boxes that appear when you enable spell check on the entire page, can you make them disappear?

    I found an addon that allows you to spell check on the webpage but it make the entire page editable and these boxes appear on everything i highlight. Can i get rid of the boxes?

    I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged  a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
    There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
    I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround

  • HT4865 How to delete the preowner icloud account without knowing the password?

    How to delete icloud account from pre owner without knowing the password?

    II'm in the same situation. Purchased a refurbished IPhone 5. I had to do a factory reset and when I reset it again, itunes tells me that the phone is linked to someone else. Called the company I bought the phone from and they say iTunes can do a master reset to link my iTunes account to the phone. Have any of you heard of this being possible?

Maybe you are looking for