Alternate ingredients being added at a ratio that does not sum to 100%
Hi
Sometimes we have alternate ingredients that are added at 10% of the original ingredient’s mass.
There is no back-fill, we simply add less.
If we add these to the alternate ingredients list with a factor of 0.1, and we do not make up for the other 0.9, will we have any issues in the system?
Please let me know.
Thanks & Regards
Ganesh.K
That is the intention of the alternate factor, so you are ok setting the factor to less than or more than 1.
Similar Messages
-
Tutor: Adding a Prior Activity that does not link to a document
When the docs are published, the Prior Activities come across as broken links if a document filename is not included in the formatting.
Is there a way around this so that if someone clicks on a prior activity which is not linked to a document, it doesn't do anything - rather than appearing as a broken link?
Thank you.Can you provide the exact text that you are putting under the Prior Activity heading?
Kind regards,
Emily -
Customer Query to idetify customers that does not have any transactions
Dear All,
I am using the following query to find out the customers that does not have any transactions in the system:
SELECT customer_number, customer_name, DECODE(status,'A','ACTIVE') current_status
--count(*)
FROM ra_customers
WHERE customer_id NOT IN (select distinct bill_to_customer_id from ra_customer_trx_all)
ORDER BY customer_name ASC
Is this right?
The above query is to identify those customers that were added by mistake and that does not have any transactions been done.
Please update...
Many thanks in advance...santark wrote:
Dear All,
I am using the following query to find out the customers that does not have any transactions in the system:>
SELECT customer_number, customer_name, DECODE(status,'A','ACTIVE') current_status
--count(*)
FROM ra_customers
WHERE customer_id NOT IN (select distinct bill_to_customer_id from ra_customer_trx_all)
ORDER BY customer_name ASC
You are will only see customers which have not been BILL TO there could be SHIP TO Customers as well hence look out for all the usages of customers in the AR transactions to get the query right.
Is this right?
The above query is to identify those customers that were added by mistake and that does not have any transactions been done.
Please update...
Many thanks in advance...Thanks -
With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.
Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?
-
E90 - Clock - Adding a new City that's not in the ...
How do I add a city, in Clock, that does not exist in the list?
I am trying to put San Antonio (Texas) and the closest I can get is Dallas.
Sheesh, the more I use this E90, the more it's starting to annoy me.
...LyallI don't mind listing only a few cities, but it would be nice to be able to enter your own city and time zone to add to the list.
It's all part of being user friendly and allowing someone to have their own location listed, rather than a city nearby.
...Lyall -
How do I find free downloads that I hve added to my library that are not in my library or in icloud?
Hi revsteph,
If you have songs that you know you have purchased, but are not showing up in your iTunes Libarary, you may want to see if you can redownload them. You may find the following article helpful:
Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Cheers,
- Brenden -
HT3702 how do I cancel an application that I am being billed for monthly that does not work
How do I cancel an application that I am being billed for monthly that does not work anymore?
How to report an issue with Your iTunes Store purchase
iTunes Store: Purchasing and managing auto-renewing subscriptions -
i just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.
Welcome to the Apple Community.
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p. -
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!
Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections? -
Need to create a sales order that does not create demand
Hi,
We need to create a no cost sales order - that does not create demand
In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
Thanks,
SMHello,
For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
Transfer of requirements / Begin assembly order from SD
Availability check for sales
Product allocation active
Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
Regards,
Sarthak -
Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful" -
Using a dll function that does not have any inputs from a VI
Hello all, I'm very new to Labview, I have wraped a dll library using the LVlib wizard and now I am trying to use it in a project. I have a function that does not take any inputs or return any thing except that a struct is populated with some status information as part of the call. I am able to draw a StartInterface VI because my void startInterface(const char* configFile, struct status_struct* status) takes the location of a configutation file as an input. But I can not figure out how to connect my Call Library Node to my a function vi that does not have any inputs ( void shutdownInterface(struct status_struct* status)).
Note that the status struct is deffined to be only and out put at the creation of the LVLIB.
Thanks, MikeThanks for the responses guys:
I think I am aware of the conotations of inputs and outputs when I created the lvlib I specified the argument struct status_struct* status as only an output instead of the default of input and output.
I do not think that I am doing anything as complex as function callbacks. My immediate goal is to have an executable (I have application builder) with two buttons and two three text fields one text field for the input of the config file, two text-fields for a cstring that is contained in the status struct; one button to start the interface and one button to stop the interface.
This is in all likely hood a case of my self being too dense and missing something fundimental ;-) I just can't figure out how to wire the shut down method after I've configured the call library node. See the attached pictures:
Attachments:
Start.jpg 7 KB
shurtdown.png 9 KB -
Where can I get a browser that does not blind me with WHITE pages?
Where can I get a browser that does not blind me with ghost WHITE pages? it's like being in a hospital -uggg!
Hello,
Your form author needs to read extend the form using Adobe Acrobat, then you should be able to fill and save the form in Reader. For more information, please see this http://www.adobepress.com/articles/article.asp?p=2158443&seqNum=3
~Deepak -
How can I get a count of files in a directory that does not include subfolders?
Information [Comand I] gives me an "items" number that includes subfolders; however, Box gives me a number that excludes subfolders and includes only files. I am trying to double check that I have migrated everything from a local directory to a Box; thus, I would like a way to a count of just the number of files in a local directory that does not include subfolders but rather is limited to files. This has been surprisingly hard to find.
Thanks,
StuSort the contents of the folder by Kind. While holding down the Shift key click on the first and last file and start to drag them. The number of the files being dragged will be displayed in a red circle.
Not elegant but works.
Maybe you are looking for
-
How do you order more than one project at a time from iPhoto?
Ordering different projects at the same time from iPhoto to save shipping costs
-
How to view sub folders on Apple TV
I have Home Sharing turned on. I have a folder on my server that has my videos. I have sub folders in this make folder, such as Home Movies -> Kid 1 or Home Movies -> Kid 2. When viewing these video files on my Apple TV's I see the content in the M
-
I accidentally created a couple of new photo albums when I backed up or synced my phone. Now I have hundreds of duplicate photos on the phone. One solution I saw online said to delete them using iTunes, but I don't actually see the photos in iTune
-
How to get info from calling Function Module without passing it.
Hi, I am facing a problem like from calling function module i want values of some variables and i dont want to change the import and export parameters, is there any way to get it done... Thanks in advance...
-
Can Transform Activity in BPEL Process have Multiple Input Scource Schema to Feed Destination Schema I want schemas s1. s2. s3 feed destination d1? is it possible?