AlterNative for Script componant?

Hi all,
we are having Some Package.. we are using Script componant for generating surrogate key..
we are facing some prb using script componant.
so we need any other alternative for that.. plz response me
thanks in advance.
pandiyan
pandiyan

Hi pandiyan,
Based on your screenshot, the issue is that PerformUpgrade method failed.
To fix this issue, please refer to the following links:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/02cb6ff1-b380-42f7-afd5-da7629445dba/upgrading-packages-from-2005-to-2012-custom-components-and-delyavalidation-woes?forum=sqlintegrationservices
http://toddmcdermid.blogspot.in/2008/09/using-performupgrade.html
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

How to maintain alternative material in a BOM for a component.

how to maintain alternative material in a BOM for a component.if stock for existing bom component is less then it should consider other alternative material in the same BOM

HI,
You can maintain alternate material for BOM Component by specifying Alternate Item group as below;
Go to CS03/CS02--> Items-> Select Component and go to details->Basic Data Tab--> General Data
Pls. find more details about Alternate Item group maintainance as below:
Alternative item: group
Consolidation of alternative items within a BOM. Every material in the assembly can be included in the alternative item group.
Use
As soon as you enter an alternative item group, you see an additional dialog box with the following data: ranking order, strategy, usage probability.
You can maintain alternative items in the following situations:
Alternative positions with specific usage probability
These alternative items are incorporated with a specific usage probability. Enter the usage probability for each alternative item in the group, so that:
dependent requirements are determined in requirements planning
dependent requirements are changed to a reservation in the production order
Alternative positions as information
You can enter an alternative item for information purposes. This item would then, for example, only be taken into account in situations involving missing parts.
As there should be neither dependent requirements nor a reservation for this item, enter no usage probability.
Procedure
Enter the same character string to denote the alternative items of an alternative item group.
Enter the same strategy for all alternative items in the alternative item group.
Dependencies
Alternative items are valuated in the following way:
Dependent requirements determination
Requirements planning determines the dependent requirements according to the usage probabilities that have been entered.
If the usage probability is 0%, then no procurement is planned for the item. For information purposes, however, dependent requirements with 0 as quantity are created.
Withdrawal posting
You can control the withdrawal posting for the resevation in the production order in the following way:
Withdrawal according to usage probability (manual change is possible)
Withdrawal if there is 100% availability
(Check ranking order and strategy)
Example: See Strategy for alternative position
Further you can also maintain alternate material if you want to stop using this material at certain time as below:
In material master of the material ,
Go to MRP-4 View----> Under Discongtinued parts specify
Discontinuation Indicator
Eff-out.
Follow-up matl
So system will automatically consider follow up material in BOM as per the settings you have maintained for the material to be replaced.
Hope this helps.
Regards,
Tejas

Script Component WebService Binary code for the script is not found

I am using SSIS 2012 to access a Public Web Service
http://marketinformation.natgrid.co.uk/MIPIws-public/public/publicwebservice.asmx
However, when adding reference to WebService (not Service Reference),
I receive the dreaded msg "Binary code for the script is not found"
I have spent an age ploughing through the forums.
Many replies seem to suggest not using Script Component to acces WebService.
Should I write a .NET app ?
Any thoughts how I should proceed would be most welcome.
thanks JohnJames

Hi JohnJames,
If I understand correctly, you already add this public web service via Add Service Reference option in the Script Component. Then you receive the error message when you trying to call the bindings and Contract settings stored in app.config file to access
the web service.
Please note that we cannot all the web service normal way as SSIS Script Component task doesn’t recongnise the app.config file. To fix this issue, we should define the BINDINGS via code rather than depending on the App.config file. For more details, please
see the following blog:
http://social.technet.microsoft.com/wiki/contents/articles/22587.consume-webservice-via-ssis-script-component.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Script Component - variables locked for read and write not available outside of post execute

Hello,
I have two Data flow task,
Frist one has OLE DB Source and Script Component as Transformation
I have package level variable called AllSiteIds
In first DFT, i have a local varibale that is declared before PreExecute method and after ScriptMain:UserComponent line.
This local variable is used in Input process method to concatenate the one of the row values like below
SiteId = SiteId + Row.SID.ToString()+",";
The package level variable AllSiteIds is set for ReadWrite on script component.
In my post execute i am setting package level variable AllSiteIds
Variables.AllSiteIds = SiteId;
In my second DFT, i have OLEDB source and Script transformation and i am accessing the package level variable AllSiteIds in Preexcute but not able to do so and getting error mentioned in subject.
My goal is to create string of all SiteIds delimited by comma and have it available in second DFT to be used in Preexcute.
The sql command i am using to get all unique siteid's is
Select SiteId from dbo.Services
Group By SiteId
Order By SiteId
Using the result from above i need to create comma delimited string of all site ids' and store it in variable so i can use it in pre excute of second DFT.
Please suggest on how to accomplish above?

If all you want is to generate a string of ids then you can simply use a Execute sql task for this and use a query based on FOR XML PATH which will generate the string of ids
http://visakhm.blogspot.in/2014/01/rowset-concatenation-with-special.html
then inside execute sql task set resultset option as single row and store the result ina SSIS varaiable of type string.
Once this is done you can then use this variable inside the subsequent data flow task
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

The binary code for the script is not found error for the Script component - SSIS 2012

Hi,
I'm implementing a SSIS 2012 pkg. For a data flow task, I'm using a Visual Basic 2010 script component with an Oracle input flow. For the script component I've an input column and I've created an output column. Inside the script code I've edited only inside
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer).
The written code is:
If Year(Row.OFFDATAORI) < 1900 Then
Row.OFFDATAORIconv = CDate(CStr("1900" + "-" + Right("00" + CStr(Month(Row.OFFDATAORI)), 2) + "-" + Right("00" + CStr(DatePart(DateInterval.Day, Row.OFFDATAORI)), 2))
Else : Row.OFFDATAORIconv = Row.OFFDATAORI
End If
It is to note that OFFDATAORI isn't the name of the input column for the script component.
When I close the script component I've an error about "The binary code for the script is not found".
Any helps to me, please?
Thanks

Hi,
I've solved. There was a syntax error, a bit hidden.
Bye

Error in SSIS Script Component

Development environment : SQL Server Business Intelligence Development Studio 2008
I have developed SSIS package to insert/update records to production Database. In this case I'm using a Script component to call a Stored Procedure to do the data access. I putted a User defined variable into
ReadOnlyVariables container. When execute the package I got the following error.
ERROR:
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSVariables100'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{22992C1D-393D-48FB-9A9F-4E4C62441CCA}'
failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSVariables100.Unlock()
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponent.UnlockReadOnlyVariables()
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PostExecute()
Appreciate if any assistance regarding this!
Kind Regards,

What is your readonly variable meant to store: a value to be supplied as argument to the stored procedure?
Either way, I agree with SSISJoost, try to use Execute Sql Task, I prefer to make as much as possible use of the SSIS components.
Maybe the reason why you write a script is that you assume one cannot call an EXEC stored procedure immediately in a data source in a data flow component. But you can prepare the Exec statment in a string variable and then use that string variabl in
a Oled db source with SQL command as variable.
Jan D'Hondt - SQL server BI development

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Assigning value to a variable in Script Component.

I'm pretty new to SSIS development and need to figure out a problem with assigning a value to a user defined variable. I created a pretty simple package. It reads a flat file, extracts date from a header record and subsequently uses derived column component
to reformat data to the desired output format. One of the columns (FileRunDate,
string, length 8) in the derived component is defined as a string and in the expression I'm assigning it to a variable I set earlier in the script component -
@[User::vRunTimeDate]. When the process runs, the output file gets generated, however FileRunDate reflects
originally set varible's value. It seems that the variable assignment in the script task does not work, even though in the debug mode, I do see how the value is being set. The variable has an attribute of ReadWrite. Is it due to the fact that the value is
being set in the same workflow?
Any feedback is greatly appriciated.

Unfortunately I'm unable to add a screenshot of the process, for some reason I get an error message when I try to do that. In a nutshell the entire workflow consist of flat file source component, following by a script component (this is where I read and
assign the variable)
public override void PostExecute()
IDTSVariables100 vars;
base.PostExecute();
// Set run date
if (strRunDate != null)
VariableDispenser variableDispenser = (VariableDispenser)this.VariableDispenser;
variableDispenser.LockForWrite("User::vRunTimeDate");
variableDispenser.GetVariables(out vars);
// Set the variable
vars["User::vRunTimeDate"].Value = strRunDate;
//Unlock the variable
vars.Unlock();
//Variables.vRunTimeDate = strRunDate;
then goes conditional split ( filtering out unwanted records), which is connected to a derived column component (this is where one of the columns get assigned a variable's value), one more script component (this where I identify
specific data element and do a replace command) and finally flat file destination.
BTW, the article in the provided URL clearly states that variable won't reflect assigned value till the entire workflow has finished. If that's the case, then I think I know my
answer. Is there is such a thing as putting execution of different steps in a different step, so anything executed subsequently will see that value?

SSIS script component to use defined connection manager to load data from a Oracle

In SSIS script compoment, I can connect to oracle with hard-coded connectionstring:
OracleConnection conn;
conn = new OracleConnection();
conn.ConnectionString = "Data Source=XE;User ID=hr;Password=******";
however, when I defined an connection managers in the script compoment and call it as follows:
    IDTSConnectionManager100 connMgr;
    OracleConnection conn;
    public override void AcquireConnections(object Transaction)
        connMgr = this.Connections.MyADONETConnectionManager;
        conn = (OracleConnection)connMgr.AcquireConnection(null);
I got error below:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task source [Script Component C# Oracel HR Oracle [21]]: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'Oracle.DataAccess.Client.OracleConnection'. Instances of types that represent COM
components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface.
   at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
   at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction)
   at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
Error at Data Flow Task source [SSIS.Pipeline]: Script Component C# Oracel HR Oracle failed validation and returned error code 0x80004002.
Error at Data Flow Task source [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task source: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
I did not find any example for Orale. A similar SQL server example is as linked below:
http://technet.microsoft.com/en-us/library/ms135939(v=sql.110).aspx
can anybody shed some light? I appreciate it...
thanks,
Steve

You need to create a connectionmanager for Oracle connection and use it within the script task
See
http://www.mssqltips.com/sqlservertip/1787/oracle-parameterized-queries-in-sql-integration-services-ssis/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SSIS Script Component Conditional Split to Flat File Destination

I have a flat file which needs to be split into multiple flat files based on value in RecordType column.
For example, if (RecordType == 20), then direct all rows to a new text file,
I have around 15 different record types. I have managed to write some C# code for Conditional Split, but
still trying to figure out what is the next step to save these rows to a text file.
I will be grateful if someone please point me to the right direction.
Many Thanks
#region Namespaces
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using System.IO;
#endregion
[Microsoft.SqlServer.Dts.Pipeline.SSISScriptComponentEntryPointAttribute]
public class ScriptMain : UserComponent
string copiedAddressFile;
private StreamWriter textWriter;
private string columnDelimiter = ",";
private string filepath = @"C:\DestFiles";
private string[] columns;
public override void PreExecute()
IDTSInput100 input = ComponentMetaData.InputCollection[0];
columns = new string[input.InputColumnCollection.Count];
for (int i = 0; i < input.InputColumnCollection.Count; i++)
columns[i] = input.InputColumnCollection[i].Name;
public override void Input0_ProcessInputRow(Input0Buffer Row)
if (Row.intRecordType ==20)
Row.DirectRowToRecordType20();
else if (Row.intRecordType ==10)
Row.DirectRowToRecordType10();

see similar example
http://www.sqlis.com/sqlis/post/Using-the-Script-Component-as-a-Conditional-Split.aspx
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Update and Write Back DataTable in Object Variable Using Script Component

Hi All..
I'm trying to update an Object Type Variable [ReadWrite] with a Data Flow Task Script Component. Variable is already holding a record set with Column(s) like, ID, Name, IsProcessed.
Now in my Data Flow Script Component, I'm trying to 1st) Fill a DataTable with my variables value then 2nd) Loop through each Input Rows in Data Flow Component and accordingly if there is a match of ID then updating IsProcessed Column in DataTable. 3rd &Finally,
Copy datatable back to Object Type Variable.
Below is the code used and just for your ref. I tried Printing content of whole DataTable after Update. This looks perfect but not sure why my variable is able to capture it.
using System;
using System.Data;
using System.Data.OleDb;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using System.Windows.Forms;
using System.Collections.Generic;
using System.Text;
[Microsoft.SqlServer.Dts.Pipeline.SSISScriptComponentEntryPointAttribute]
public class ScriptMain : UserComponent
DataTable dt = new DataTable();
OleDbDataAdapter adapter = new OleDbDataAdapter();
List<string> listriuid = new List<string>();
public override void PreExecute()
base.PreExecute();
public override void PostExecute()
base.PostExecute();
adapter.Fill(dt, this.Variables.varobjChildPackageLog);
dt.AcceptChanges();
foreach (DataRow row in dt.Rows)
if (listriuid.Contains(row["ID"].ToString()))
row["IsProcessed"] = "Y";
// Just to see the Final Data Table Output
//StringBuilder b = new StringBuilder();
//foreach (System.Data.DataRow r in dt.Rows)
// foreach (DataColumn c in dt.Columns)
// b.Append(c.ColumnName.ToString() + ":" + r[c.ColumnName].ToString());
//MessageBox.Show(b.ToString());
this.Variables.varobjChildPackageLog = dt;
dt.Dispose();
adapter.Dispose();
public override void RIUIDInput_ProcessInputRow(RIUIDInputBuffer Row)
try
listriuid.Add(Row.ID.ToString());
catch (Exception ex)
MessageBox.Show(ex.Message.ToString());
Regards, Avik M.

why do you need to do this in script task.
This is just a matter of using lookup task while you retrive data from source itself to find the matches and use a derived column transform to check and set appropriate value for IsProcessed column. The object variable itself is not required and you dont
even require a looping statement either!
If both source and lookup tables are in same server then you can just wrap them inside source sql query itself to do matching and retrieve the value for IsProcessed within select statement itself in OLEDB Source inside data flow.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Alternative for OAAD?

Hi Guys,
Since OAAD transaction has disadvantage of suitable for single photo upload at a time,what could be an alternative for that?
Warm Regards,
Mohandoss P.

Helo Prem,
Tcode SE 78 is used to upload a photo from ur PC to SAP environment,this uploaded photo will be utilized in future in smartforms or SAP script.First Clear about SE78 and OAAD.
Warm Regards,
Mohandoss P.

Alternative for the ActiveX object for the other browsers excluding IE?

I need open a word document (Doc/Docx) then edit and save in client side itsetf.forthat i'm using ActiveXObject and javascript.it is working fine with IE but it's not working in other browsers(Chrome,Firefox).
var w = new ActiveXObject('Word.Application');
w.Visible = true; //set to false to stop the Word document from opening
obj = w.Documents.Open("D:\\test.docx");
docText = obj.Content;
w.Selection.TypeText("Hello world!");
w.Documents.Save();
what is Alternative for the ActiveX object (OR) How can i edit a word document (Doc/Docx) by using client side scripting?
Punch bala

This problem is haaping to you there is reasons are
1. Old FF , so 1st update your browser
2.or net speed , beczzz gmail needs high speed .. high means not like 3G ..it should be approximately 25-30kbps . As u wrote this doesn't happen in IE , becz IE is mad for work in low speed also bt it takes time to load .. ones load never refresh without you permition bt FF works fastly so it try to open as it has dwnloded ,, bt half part cant be stable long .so it refreshes..........
So now update ur browser n use high n stable INTERNET ....

Document Service - Alternatives for dynamic conversion?

In WebCenter Portal, there's the Documents Service. If you are for example in the Document Manager task flow and click a document, it will show you a preview of the document (if configured properly, see:
http://docs.oracle.com/cd/E28280_01/webcenter.1111/e12405/wcadm_documents.htm#BABBCAHI) This preview is dynamically created using the Dynamic Converter component in WebCenter Content.
I've found that some users don't see the advantage of having a dynamically created preview. Generating the preview can take very long for complex documents and often the preview (of for example, a large Excel sheet) does not reveal a lof of information and people choose to download the document anyway.
Do we have any alternatives for the preview functionality? Perhaps a direct download, or alternative plugins? The only alternative I see is showing the document properties instead, but that's not very user-friendly. Any ideas?

Hi Jaap ,
I think you can take a look at the Thumbnail functionality , which would show a snippet of the actual file rather than doing an entire Dynamic conversion . Not sure how much of in-context would this solution be , but just an idea .
Use case : https://forums.oracle.com/thread/2472735
Thanks,
Srinath

Major Bug in SSIS 2012 Script Component - Potentially

I think there is a major issue with the Script Component in SSIS when running SSDT on Windows 8.1. I have a Script Component that functions as a data source. The script compiles successfully. However, when returning back to the Data Flow Task, I still get the
following error which I'd get when an error exists in the Script.
Validation error. Data Flow Task Script Component [2]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
The script compiles successfully so this is frustrating. This is incorrect and I believe it's an issue with SSDT/SSIS when run on Windows 8.1. I've applied SQL Server 2012 SP1 with CU7 and the error still exists. Can someone else confirm this as
a bug?
<a href="http://martinsbiblog.spaces.live.com" target="_blank">http://martinmason.wordpress.com</a>

I'm simply doing the following:
Add a Data Flow Task.
Add a Script Component. Configure as a Source.
Double click on the Script Component.
Click on the Edit Script button.
Compile the script. Compiles successfully.
Close the VSTAProject editor.
Close the Script Component properties page.
When returning to the Data Flow, the "Binary code for the script is not found" error is return
Running as an Administrator did not solve the problem. Again, this is only an issue with SSIS on Windows 8.1 so if you're not running on Windows 8.1, do not bother replying. I've applied SP1 and CU7 and the problem was not resolved.
Really regretting upgrading to Windows 8.1.
<a href="http://martinsbiblog.spaces.live.com" target="_blank">http://martinmason.wordpress.com</a>

AlterNative for Script componant?

Similar Messages

Maybe you are looking for