ALV: how to handle event for multi (lead) row selection ?

Hi,
I use editable ALV and configure it for multi (lead) selection. Works fine.
But I could not find any event handler for reading the selected lines.
There is only the Event handler ON_LEAD_SELECT: this works only for 1 line
(the lead line). But I could not read multi lines. Who can help?
Thanks in advance, Christian

Hi Christian,
did you try a custom button?
Try a call
node->GET_SELECTED_ELEMENTS
I cant remember if ALV sends event when multi-selection is on for each row selection.
ie as each row is selected, do you get control ?
If so, then you should still be able to call node->GET_SELECTED_ELEMENTS .
regards
Phil.

Similar Messages

How to Handle Events for JOptionPane buttons?

Hi All,
I need a help...
I am trying to develop a simple SWING application that consists of multiple elements (mainly text fields) and a Submit button. On pressing Submit button, it should validate all the fields and then do something else. But if some fields are left blank, then it should give a pop-up message and on clicking the OK button on the pop-up message, the focus should go to that text field which is left null.
The problem is I am not able to understand how to Capture this OK button click-event of the pop-up message. I mean how to do something when the OK/Cancle button of the pop-up window is clicked.
Please Help me.
Thanks in Advance,
Ujjal

As already pointed out, JOptionPane has some static methods which show a dialog, and return an int, or a string. The whole point of this class is to remove the need for any event handling by the developer, that is, you simply call the showDialog method or whatever, and it returns a value telling you, for example, which button was pressed - no need for action listeners at all. The result of the showDialog method (or whichever you use) tells you which button was pressed. Check the javadocs for JOptionPane for details of several constants that indicate which button was pressed
The class exists to make simple dialogs trivial to generate - you're overcomplicating things!

How to handle events for Tab Control

Hi,
I have a Tab control with 4 tabs and I would like when I go to a specific tab all the contents of that tab being updated. Could you please help me with this?
How should I set the event structure
Thanks

Tab Control->Value Change is the event you want. You can then use a case structure to do whatever you need it to based on the "New Value".
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to handle Events in OO abap.

Hii all as im new to SAP and ABAP , i want to know , what are events all about and how to handle events?
Like how to guide double click to call a transaction , or to create a hot sopt and then , calling the transaction...........
Please Help.

Hi Chandan,
possibly you are not just new to ABAP but new to obeject oriented programming in general. In oo, you use events to trigger methods that are registered as 'listeners' for the event.
As I have no idea on your current knowledge, I don't know what I could recommend to start with.
My personal approach is first to have a task I want to complete and then find and understand the methods to get there.
Regards,
Clemens

How to handle Event in JACOB API

Hi,
I am read the outlook mail using JACOB[Java Com Bridge] API successfully, now i want to handle events for outlook mail using JACOB. and also i can able to catch the new mail event. but i am unable to catch any deleted mail and move mail from one folder to another folder. This is extremely important for my project. so any one please tell me how to handle and catch the Outlook deleted event and move event using JACOB.
Thanks in Advance,
With Regards,
Ganesh

Windows can be closed in a number of ways and the simplest way to trap them would be to handle Window Closing in code behind.
This is also the easiest way to show dialogs if that's how you wanted the warning message to appear.
This:
chxAllowToClose.IsChecked
Looks like a checkbox to me, seeing as you have IsChecked.
That presumably means you already have that bound to a viewmodel and visible to the user.
You can therefore just test that value from the view.
If you prefer to hide that instead then there are several options.
You could have a dependency property and a binding in code behind which binds to the viewmodel. Test that in your event.
Or
You could save the value when it changes to application.current.resources. Since dependency properties and bindings are a bit wordy this is easier.
Or
You could have just a variable in the view code behind and use messenger to tell that when the value changes from the viewmodel:
http://social.technet.microsoft.com/wiki/contents/articles/26070.communicating-between-classes.aspx
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

Handling events for

I have a JApplet (menuhandle.java) that adds a menubar. While handling events for the "Open" menu item under File menu(to make it show the OpenFileDialog box) a NullPointerException was thrown. How should this be overcome?
public void actionPerformed(ActionEvent e)
if (e.getActionCommand() =="Open")
chooser = new JFileChooser();
int returnVal = chooser.showOpenDialog(new menuhandle());
chooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
ExampleFileFilter filter = new ExampleFileFilter();
filter.addExtension("dcm");
filter.setDescription("Dicom files");
chooser.setFileFilter(filter);
if(returnVal == JFileChooser.APPROVE_OPTION)
File file=chooser.getSelectedFile();
if(filter.accept(file))
str=file.getName();
I need to display the Open File dialog box and also retrieve the file the user actually selected, in order to do certain manipulations with it. Can somebody tell me how to go about this?

Just a guess, but could the problem be related tothe
fact that for security purposes many file
manipulation functionality is disabled in applets?Indeed. The SecurityManager for unsigned applets does
not allow the use of JFileChooser
Thanx a lot. But if i make menuhandle .java as a simple class (without extending JApplet) and then try to use this class from inside another applet........will this work? Or will the SecurityManager still not allow the use?

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to handle bdc for more than one transaction?

how to handle bdc for more than one transaction?

Hi srk,
I am providing you with some references below. Hope this prove to be helpful to you.
Method 1:
Use one BDC_OPEN_GROUP
Multiple BDC_INSERT
One BDC_CLOSE_GROUP.
Call function BDC_OPENGROUP.
Build BDC data and call lBDC_INSERT for transaction 1
Build BDC data and call lBDC_INSERT for transaction 2
Build BDC data and call lBDC_INSERT for transaction 3
paas the tcodes to bdc_insert.
call function BDC_CLOSE_GROUP.
Also check this out:
Here we need to record 2 transactions (shdb).
Once completion of the recording. Populate the data into input internal table .
Loop the internal table and process the 2 transactions
like
1. BDC_OPEN_GROUP
2. LOOP AT ITAB
a. Populate first transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
b. Populate second transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
ENDLOOP.
3. BDC_CLOSE_GROUP
the above info can be found at : How to use 2 transactions in BDC?
Also check this out:
Suppose u have created recordings for transactions 'MM01' 'XK01' and 'VA01'.
Then do this:
bdc_open_group.
after this we have to fill the bdcdata structure for one transaction.here 'MM01'.
bdc_insert.
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'xk01'.
bdc_insert .
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'va01'.
bdc_insert.
bdc_close_group.
Hope these are useful to you.
Please reward if any of the above are useful.
Regards,
Kalyan

How to Put Legend for Multi Series Stacked Graph...?

Hi Experts,
Please guide me how to put Legend for Multi Series Stacked Graph...?
Its very URGENT...!!!!
Thanks in advance...
Regards,
Manoj

I searched the forum using "jcombobox multiple columns". The first posting I read had a link to a posting with 4 different solutions.
Why is it so hard to search the forum before posting a question????

ALV: how to display only subtotals and total rows in the output

ALV: how to display only subtotals and total rows in the output
i am getting output
i am getting subtotals for respective fields
but i want to display only subtotals and totals rows in the output
i have tried the
totals_only parameter in slis_layout_alv
but it is not working.

hi,
For TOTAL
For the amount field / quantity field in the field catalog give DO_SUM = 'X' for WHOLE total
For SUBTOTAL
For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
DATA: lt_sort type SLIS_T_SORTINFO_ALV,
ls_sort type slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'Give the field name that you do the sum'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO lt_sort.
fieldcatalog-do_dum = 'X'.
for subtotals
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOTAL = 'X'.
APPEND WA_SORT TO IT_SORT.
Refer
http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
regards,
Prabhu
reward if it is helpful

Can we handle exceptions for the expressions in select query?

Hi all,
Can we handle exceptions for the expressions in select query.
I created a view, there I am extracting a substring from a character data and expected that as a number.
For example consider the following query.
SQL> select to_number( substr('r01',2,2) ) from dual;
TO_NUMBER(SUBSTR('R01',2,2))
1
Here we got the value as "1".
Consider the following query.
SQL> select to_number( substr('rr1',2,2) ) from dual;
select to_number( substr('rr1',2,2) ) from dual
ORA-01722: invalid number
For this I got error. Because the substr returns "r1" which is expected to be as number. So it returns "Invalid number".
So, without using procedures or functions can we handle these type of exceptions?
I am using Oracle 10 G.
Thanks in advance.
Thank you,
Regards,
Gowtham Sen.

SQL> select decode(ltrim(rtrim(translate(substr('r21', 2, 2), '0123456789', ' ' ), ' '), ' '), null, (substr('r21', 2, 2)), null) from dual;
DE
21
SQL> ed a
SQL> select decode(ltrim(rtrim(translate(substr('rr1', 2, 2), '0123456789', ' ' ), ' '), ' '), null, (substr('rr1', 2, 2)), null) from dual;
D
-

How to create tcode for modulepool program with selection screen?

hi,
How to create tcode for modulepool program with selection screen?
thanks,
sagar

Hi,
We need to goto SE80.
In our program we right click on object name and goto create
-> transaction. Enter the module pool program and screen number and save and activate.
Or by SE93 also we can create a transaction code for our program.
Hope ths helps.
plz reward if useful.
thanks,
dhanashri..
Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

How to handle event structures for two buttons and two counters.

     *I have two buttons A and B, and have to compare the difference in hits between them. So do I place an event structure within a while loop for each button (2 buttons, 2 event structures, 2 while loops), or does it need to be one event structure with cases for both buttons whithin one while loop?
     *How do I pass the values of buttons A and B's hit counters out of the while loop in order to calculate the differences between them after each increment, not just the final count after the stop button is hit?
    *How would I make one stop button work to handle both buttons A and B?   I tried to place the actual stop button in one button A's structure and its global in B's structure, but It wont seem to let me use a local variable for a latchable control
Checker

You should probably have not started a new thread and waited until your question in the original thread was answered. You can modify altenbach's example for a second button. You have a single event structure with a new event for the second button. You have a second shift register to track the number of times the second button is pressed. Inside the while loop but outside the event structure, you just have a subtract function in or to report the difference. do not modify the posted example for the stop button. It works perfectly as is.

How to handle events in Swng

Hi!
I would like to know which one of the following is the best way to handle events in Swing application.
Method 1
Write annonymus inner classes in the same class
Method 2
=======
Write a seperate class which extends the adapter class of the event handling and create an object of that in the main class and assign it to the components with addActionHandler() method.
I am trying to use the second one and I have the following design issue.
I have a class frmMain.java in which I have a frame and to that frame I am adding a panel which consists of 'N' No. of components.
I want to make this panel added to the frame when I click on a menu item (login) and want to remove the panel from frame when I click on a menu item(logout).
I have a main class called Application.java where I create the object of my frame(frmMain.java).
Thanks in advance,
AV

1. Your JFrame is now subject to receive action events from anywhere. You will have to be more careful that you respond only to the right events.
2. If you have a lot of possible consequences to an event(for example, based on button pressed), you'll need a long if...then...else statement to determine what to do based on the source of the event.
3. With individual ActionListener classes, it's easier to add the same listener to multiple components and no need to worry about source.
4. Kind of the same thing: With individual classes, the event and its consequences are so tightly coupled.
End preaching....basically, my style boils down to what I call the tool set vs Swiss army knife rule. Java seems designed around the concept of a large number of specific purpose classes vs a smaller number of multi purpose classes and I think its a design methodology that makes sense, because I believe strongly in functional isolation in my code.

How to handle events in webdynpro abap

Hi,
can any body explain how to handle the events in webdynpro abap.
i want to know some concepts in general.
Thanks,

Hi Mahesh,
you can create event handlers under the actions tab in you view. evry event handler has an importing parameter wdevent of type ref to cl_wd_custom_event.
you can also create events in your component controller and they can be handled within your views
check cl_wd_custom_event class for details about what all information you get when an event occurs.
for further details you can check out the following links
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/ed6f4169e25858e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/c751415e3b6532e10000000a1550b0/frameset.htm
also you can try the tutorial at the following link for further clarity
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2eb11b59-0a01-0010-dfa3-8292abdf9c4f
Regards,
Shweta
Message was edited by:
Shweta R Shanbhag

ALV: how to handle event for multi (lead) row selection ?

Similar Messages

Maybe you are looking for