ALV- REFRESH_TABLE_DISPLAY
Hello Guys,
I have an ALV Grid with an editable field. By changing this value, we recalculated the value of another column of AVL automatically. This happens right on the inner table, but are reflected in the Grid if the method I Execultar: ALV-> REFRESH_TABLE_DISPLAY.
It turns out that this method makes the focus go to the first record of the ALV.
Does anyone know how to avoid this effect?
Hi Ricardo ,
Try calling method like below ;
DATA : gs_stbl type lvc_s_stbl .
** Row,Col Stable
gs_stbl-row = 'X'.
gs_stbl-col = 'X'.
call method go_alv->refresh_table_display
exporting
is_stable = gs_stbl.
Regards
Similar Messages
-
Problem handling data_changed event in OO ALV
I'm displaying my internal table with an OO ALV and I'm trying to handle the data_changed event in order to do some checking before actually modify my internal table.
this is the code of how I was planing to do that:
handle_data_changed
FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed
e_onf4
e_onf4_before
e_onf4_after
e_ucomm.
METHOD handle_data_changed.
* IF er_data_changed->mt_mod_cells-fieldname = 'COD_M'.
* do something
* else if er_data_changed->mt_mod_cells-fieldname = 'QUANTIDADE'.
* do something else
* endif.
* alv->refresh_table_display.
ENDMETHOD. "handle_data_changed
but it gives me this error:
"MT_MOD_CELLS" is a table without a header line and therefore has no component called "FIELDNAME".
My question is, how can access the cell that is being modified, and the new data?Dont know if this is the most clever way to do it but i solved it like this
DATA: wa_data_changed TYPE lvc_s_modi,
wa_tabi TYPE zsl_mat_c.
READ TABLE er_data_changed->mt_mod_cells INDEX 1
INTO wa_data_changed.
IF wa_data_changed-fieldname = 'COD_M'.
* do something
ELSEIF wa_data_changed-fieldname = 'QUANTIDADE'.
* do something else
ENDIF.
thanks for your help -
Trigger DATA_CHANGED event from triggered DATA_CHANGED event in second ALV
Hello,
I do have 2 ALVs (class CL_GUI_ALV_GRID) in a Splitter-Control.
Both ALVs do have registered the event DATA_CHANGED in seperate handler methods.
If there is a change in first ALV(line insertion with values), there will be inserted a new line with values in the second ALV. After handling the event at first ALV, I call CHECK_CHANGED_DATA of the second ALV and REFRESH_TABLE_DISPLAY of the second ALV. I would expect that the call of CHECK_CHANGED_DATA would trigger the event DATA_CHANGED, but it does not trigger the event DATA_CHANGED of the second ALV.
The problem is maybe that the input at the data is not made by the user(UI).
What could I do to trigger this event and check the new data at second ALV?
Yours JoergHello ,
yeah thats correct , but in your case what you can do is
g_grid1(first alv) >CHECK_CHANGED_DATA( Importing E_VALID = l_Valid )>in the implementation method of this ..update global variable g_second = 'X' in order to refresh ALV2.
g_grid1(first alv) -->Refresh_table_display( ).
if g_second = 'X'.
g_grid2-->SET_TABLE_FOR_FIRST_DISPLAY. so it will refresh the second alv contents.
endif.
regards
Prabhu -
First try with ALV Grid and Abap Objects
Hi,
this is my first try to write a simple report which just reads a textfile and display it in an ALV Grid. As a basis, I used some examples from SDN, but it did not work as expected
I would like just to use a docking container. I do not need a separate area for the ALV Grid. The report gives no syntax errors, but it just display the report title, nothing else. SAP R/3 Release is 4.7. Below is the source code of the report. Any idea what is missing?
*& Report Z_PLAN_TEXT_UPLOAD *
REPORT z_plan_text_upload.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_dynnr TYPE sy-dynnr,
gf_repid TYPE sy-repid.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Local Class Definition
* Local Class Implementation
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
SKIP.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SKIP.
PARAMETERS:
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn.
SELECTION-SCREEN END OF BLOCK b1.
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
gf_dynnr = sy-dynnr.
gf_repid = sy-repid.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog
CHANGING gt_fieldcat.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
* PARENT =
repid = gf_repid
dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
* RATIO =
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid IS INITIAL.
CREATE OBJECT go_alv_grid
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid is initial
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Kostenstelle' .
ls_fcat-seltext = 'Kostenstelle' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalogI have added some more functionality to my report. The good thing is, the report works as it should.
BUT, I'm not really sure, whether this is a good (correct) design. The report works the following way:
1. Read planning data form text file into internal table
2. Display the internal table
3. Convert the data and display the converted result
4. Post the converted data to the system
5. Display log with messages
The main thing is, I would like to know, do i really need two dynros, to display the two different internal tables or is it possible just to use one ALV-Grid? I was not able to find another solution. Any comment or help to the report is appreciated.
*& Report Z_PLAN_TEXT_UPLOAD_TEST *
REPORT z_plan_text_upload_test.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_okcode TYPE ui_func,
gf_balloghndl TYPE balloghndl.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid_0100 TYPE REF TO cl_gui_alv_grid,
go_alv_grid_0200 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungsposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Bapi Strukturen
DATA:
gs_headerinfo TYPE bapiplnhdr,
gt_indexstructure TYPE TABLE OF bapiacpstru,
gs_indexstructure LIKE LINE OF gt_indexstructure,
gt_coobject TYPE TABLE OF bapipcpobj,
gs_coobject LIKE LINE OF gt_coobject,
gt_pervalue TYPE TABLE OF bapipcpval,
gs_pervalue LIKE LINE OF gt_pervalue,
gt_return TYPE TABLE OF bapiret2,
gs_return LIKE LINE OF gt_return,
gt_control TYPE TABLE OF bapipcpctrl,
gt_totvalue TYPE TABLE OF bapipcptot.
TYPES:
BEGIN OF gy_bapi_input,
version TYPE versn,
* perio TYPE co_perio,
fisc_year TYPE gjahr,
coobject(10) TYPE c,
cost_elem TYPE kstar,
wkgbtr01 TYPE wkgxxx,
wkgbtr02 TYPE wkgxxx,
wkgbtr03 TYPE wkgxxx,
wkgbtr04 TYPE wkgxxx,
wkgbtr05 TYPE wkgxxx,
wkgbtr06 TYPE wkgxxx,
wkgbtr07 TYPE wkgxxx,
wkgbtr08 TYPE wkgxxx,
wkgbtr09 TYPE wkgxxx,
wkgbtr10 TYPE wkgxxx,
wkgbtr11 TYPE wkgxxx,
wkgbtr12 TYPE wkgxxx,
END OF gy_bapi_input.
DATA:
gt_bapi_input TYPE TABLE OF gy_bapi_input,
gs_bapi_input LIKE LINE OF gt_bapi_input.
* Anwendungs-Log
DATA: gs_balsmsg TYPE bal_s_msg.
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SELECTION-SCREEN SKIP.
PARAMETERS:
gp_kokrs LIKE coep-kokrs,
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn,
gp_test AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b1.
* Local Class Definition
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar_0100 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0100 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm,
handle_toolbar_0200 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0200 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm.
PRIVATE SECTION.
ENDCLASS. "lcl_event_handler DEFINITION
* Local Class Implementation
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_toolbar_0100.
PERFORM handle_toolbar_0100
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0100.
PERFORM handle_user_command_0100
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
METHOD handle_toolbar_0200.
PERFORM handle_toolbar_0200
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0200.
PERFORM handle_user_command_0200
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
ENDCLASS. "lcl_event_handler IMPLEMENTATION
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
PERFORM create_log.
gs_return-type = 'I'.
IF gp_test = 'X'.
gs_return-message = text-010.
ELSE.
gs_return-message = text-020.
ENDIF.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
gs_balsmsg-msgty = sy-msgty.
gs_balsmsg-msgid = sy-msgid.
gs_balsmsg-msgno = sy-msgno.
gs_balsmsg-msgv1 = sy-msgv1.
gs_balsmsg-msgv2 = sy-msgv2.
gs_balsmsg-msgv3 = sy-msgv3.
gs_balsmsg-msgv4 = sy-msgv4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDIF.
CALL SCREEN '0100'.
*& Module status_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999 "full-screen size !!!
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog_input
CHANGING gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0100 IS INITIAL.
CREATE OBJECT go_alv_grid_0100
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0100 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0100 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0100.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0100->handle_toolbar_0100
FOR go_alv_grid_0100.
SET HANDLER go_event_handler_0100->handle_user_command_0100
FOR go_alv_grid_0100.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0100->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0100->set_toolbar_interactive.
ENDMODULE. " status_0100 OUTPUT
*& Module status_0200 OUTPUT
* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0200'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog---------------------------------------*
PERFORM build_fieldcatalog_bapi_input
CHANGING
gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0200 IS INITIAL.
CREATE OBJECT go_alv_grid_0200
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0200 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0200 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0200.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0200->handle_toolbar_0200
FOR go_alv_grid_0200.
SET HANDLER go_event_handler_0200->handle_user_command_0200
FOR go_alv_grid_0200.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0200->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_bapi_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0200->set_toolbar_interactive.
CALL METHOD go_alv_grid_0200->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = go_alv_grid_0200.
ENDMODULE. " status_0200 OUTPUT
*& Module user_command_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0100 INPUT
*& Module user_command_0200 INPUT
* text
MODULE user_command_0200 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0200 INPUT
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalog
*& Form handle_toolbar_0100
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0100
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'KONV'.
ls_toolbar-quickinfo = 'Konvertieren'.
ls_toolbar-text = 'Konvertieren'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0100
*& Form handle_user_command_0100
* text
* -->P_E_UCOMM text
FORM handle_user_command_0100
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'KONV'.
PERFORM convert_data.
ENDCASE.
ENDFORM. " handle_user_command_0100
*& Form exit_program
* text
* --> p1 text
* <-- p2 text
FORM exit_program.
CALL METHOD go_alv_grid_0100->free.
IF NOT go_alv_grid_0200 IS INITIAL.
CALL METHOD go_alv_grid_0200->free.
ENDIF.
CALL METHOD go_docking_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = sy-repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(500).
ENDIF.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form handle_toolbar_0200
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0200
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'POST'.
ls_toolbar-quickinfo = 'Buchen'.
ls_toolbar-text = 'Buchen'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0200
*& Form handle_user_command_0200
* text
* -->P_E_UCOMM text
FORM handle_user_command_0200
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'POST'.
PERFORM post.
ENDCASE.
ENDFORM. " handle_user_command_0200
*& Form convert_data
* text
* --> p1 text
* <-- p2 text
FORM convert_data.
DATA: lf_perio(3) TYPE n.
LOOP AT gt_text_input INTO gs_text_input.
TRANSLATE gs_text_input-planbetrag USING '. '.
TRANSLATE gs_text_input-planbetrag USING ',.'.
CONDENSE gs_text_input-planbetrag.
gs_bapi_input-version = gp_versn.
gs_bapi_input-fisc_year = gp_gjahr.
gs_bapi_input-coobject = gs_text_input-kostenstelle.
gs_bapi_input-cost_elem = gs_text_input-kostenart.
lf_perio = gs_text_input-planperiode.
CASE lf_perio.
WHEN '001'.
gs_bapi_input-wkgbtr01 = gs_text_input-planbetrag.
WHEN '002'.
gs_bapi_input-wkgbtr02 = gs_text_input-planbetrag.
WHEN '003'.
gs_bapi_input-wkgbtr03 = gs_text_input-planbetrag.
WHEN '004'.
gs_bapi_input-wkgbtr04 = gs_text_input-planbetrag.
WHEN '005'.
gs_bapi_input-wkgbtr05 = gs_text_input-planbetrag.
WHEN '006'.
gs_bapi_input-wkgbtr06 = gs_text_input-planbetrag.
WHEN '007'.
gs_bapi_input-wkgbtr07 = gs_text_input-planbetrag.
WHEN '008'.
gs_bapi_input-wkgbtr08 = gs_text_input-planbetrag.
WHEN '009'.
gs_bapi_input-wkgbtr09 = gs_text_input-planbetrag.
WHEN '010'.
gs_bapi_input-wkgbtr10 = gs_text_input-planbetrag.
WHEN '011'.
gs_bapi_input-wkgbtr11 = gs_text_input-planbetrag.
WHEN '012'.
gs_bapi_input-wkgbtr12 = gs_text_input-planbetrag.
ENDCASE.
COLLECT gs_bapi_input INTO gt_bapi_input.
CLEAR gs_bapi_input.
ENDLOOP. "at gt_text_input
CALL SCREEN 0200.
ENDFORM. " convert_data
*& Form build_fieldcatalog_bapi_input
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_bapi_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'VERSION' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'FISC_YEAR' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COOBJECT' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COST_ELEM' .
ls_fcat-ref_table = 'BAPIPCPVAL' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR01'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR02'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR03'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR04'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR05'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR06'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR07'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR08'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR09'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR10'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR11'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR12'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. " build_fieldcatalog_bapi_input
*& Form post
* text
* --> p1 text
* <-- p2 text
FORM post.
DATA:
lf_index(6) TYPE n,
lf_kostl LIKE csks-kostl,
lf_aufnr LIKE aufk-aufnr,
lf_kstar LIKE cska-kstar.
DATA:
lt_csks TYPE TABLE OF csks.
break c5085345.
* Header
gs_headerinfo-co_area = gp_kokrs.
gs_headerinfo-fisc_year = gp_gjahr.
gs_headerinfo-period_from = '001'.
gs_headerinfo-period_to = '012'.
gs_headerinfo-version = gp_versn.
gs_headerinfo-plan_currtype = 'C'.
LOOP AT gt_bapi_input INTO gs_bapi_input.
* Fill index structure
CLEAR gs_indexstructure.
lf_index = sy-tabix.
gs_indexstructure-object_index = lf_index.
gs_indexstructure-value_index = lf_index.
gs_indexstructure-attrib_index = '000000'.
INSERT gs_indexstructure INTO TABLE gt_indexstructure.
* Fill coobject
CLEAR gs_coobject.
gs_coobject-object_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_kostl.
SELECT * FROM csks INTO TABLE lt_csks
WHERE
kokrs = gp_kokrs AND
kostl = lf_kostl.
IF sy-subrc = 0.
gs_coobject-costcenter = lf_kostl.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_aufnr.
CALL FUNCTION 'K_ORDER_READ'
EXPORTING
aufnr = lf_aufnr
EXCEPTIONS
not_found = 1.
IF NOT sy-subrc = 0.
gs_return-type = 'E'.
gs_return-message+0(10) = 'CO-Objekt '.
gs_return-message+10(10) = gs_bapi_input-coobject.
gs_return-message+20(20) = ' existiert nicht.'.
CONDENSE gs_return-message.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
EXIT.
ENDIF. "IF NOT sy-subrc = 0
gs_coobject-orderid = lf_aufnr.
ENDIF. "sy-subrc = 0
INSERT gs_coobject INTO TABLE gt_coobject.
* Period value
gs_pervalue-value_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-cost_elem
IMPORTING
output = lf_kstar.
gs_pervalue-cost_elem = lf_kstar.
gs_pervalue-fix_val_per01 = gs_bapi_input-wkgbtr01.
gs_pervalue-fix_val_per02 = gs_bapi_input-wkgbtr02.
gs_pervalue-fix_val_per03 = gs_bapi_input-wkgbtr03.
gs_pervalue-fix_val_per04 = gs_bapi_input-wkgbtr04.
gs_pervalue-fix_val_per05 = gs_bapi_input-wkgbtr05.
gs_pervalue-fix_val_per06 = gs_bapi_input-wkgbtr06.
gs_pervalue-fix_val_per07 = gs_bapi_input-wkgbtr07.
gs_pervalue-fix_val_per08 = gs_bapi_input-wkgbtr08.
gs_pervalue-fix_val_per09 = gs_bapi_input-wkgbtr09.
gs_pervalue-fix_val_per10 = gs_bapi_input-wkgbtr10.
gs_pervalue-fix_val_per11 = gs_bapi_input-wkgbtr11.
gs_pervalue-fix_val_per12 = gs_bapi_input-wkgbtr12.
INSERT gs_pervalue INTO TABLE gt_pervalue.
ENDLOOP. "at gt_bapi_input
* Buchungsbaustein
CALL FUNCTION 'BAPI_PRIM_COST_CHECK_AND_POST'
EXPORTING
header_info = gs_headerinfo
testrun = gp_test
* DELTA = ' '
TABLES
idx_structure = gt_indexstructure
object = gt_coobject
per_value = gt_pervalue
tot_value = gt_totvalue
contrl = gt_control
return = gt_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
LOOP AT gt_return INTO gs_return.
gs_balsmsg-msgty = gs_return-type.
gs_balsmsg-msgid = gs_return-id.
gs_balsmsg-msgno = gs_return-number.
gs_balsmsg-msgv1 = gs_return-message_v1.
gs_balsmsg-msgv2 = gs_return-message_v2.
gs_balsmsg-msgv3 = gs_return-message_v3.
gs_balsmsg-msgv4 = gs_return-message_v4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDLOOP. "AT gt_return
PERFORM show_log.
ENDFORM. " post
*& Form create_log
* text
* --> p1 text
* <-- p2 text
FORM create_log .
DATA: ls_balslog TYPE bal_s_log.
* Einige Verwaltungsdaten
ls_balslog-extnumber = 'ZPLAN010'.
ls_balslog-aluser = sy-uname.
ls_balslog-alprog = sy-repid.
* Create
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = ls_balslog
* IMPORTING
* e_log_handle = gf_balloghndl
EXCEPTIONS
log_header_inconsistent = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_log
*& Form add_log_message
* text
* -->P_GS_BALSMSG text
FORM add_log_message
USING
ps_balsmsg TYPE bal_s_msg.
break c5085345.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
* I_LOG_HANDLE =
i_s_msg = ps_balsmsg
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_messa
*& Form add_log_message_free_text
* text
* -->P_GS_RETURN_TYPE text
* -->P_GS_RETURN_MESSAGE text
FORM add_log_message_free_text
USING
ps_type
ps_message.
CALL FUNCTION 'BAL_LOG_MSG_ADD_FREE_TEXT'
EXPORTING
* I_LOG_HANDLE =
i_msgty = ps_type
* I_PROBCLASS = '4'
i_text = ps_message
* I_S_CONTEXT =
* I_S_PARAMS =
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_message_free_text
*& Form show_log
* text
* --> p1 text
* <-- p2 text
FORM show_log .
DATA:
l_s_display_profile TYPE bal_s_prof.
* get display profile
CALL FUNCTION 'BAL_DSP_PROFILE_NO_TREE_GET'
IMPORTING
e_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* use grid for display if wanted
l_s_display_profile-use_grid = 'X'.
* set report to allow saving of variants
l_s_display_profile-disvariant-report = sy-repid.
* when you use also other ALV lists in your report,
* please specify a handle to distinguish between the display
* variants of these different lists, e.g:
l_s_display_profile-disvariant-handle = 'LOG'.
* call display function module
* We do not specify any filter (like I_S_LOG_FILTER, ...,
* I_T_MSG_HANDLE) since we want to display all logs available
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
EXPORTING
i_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
No data in ALV when using MC_STYLE_ENABLED
Hi experts,
I want to display some data in a ALV-Grid control, with just one column which is editable. So the ALV-Grid looks well, when I only display the data. But when I add the attributes for the editable column into my internal table, then I cannot see any data in there. But I can see the rows with the editable column.
Here are the operations:
1) All items of an transparent table is viewed in the ALV-LIST1
2) User can select the specific rows which he/she want to edit.
3) User press a button in the toolbar of ALV-LIST1
4) The ALV-LIST2 comes up with the selected rows and one editabled column, but no data in there...
I already looked in this great example, but I cannot see any special command, posted here:
editing alv output
I also looked in the examples of BCALV_EDIT_0*.
Here is the code:
Definitions:
The method for creating the second ALV-Grid
METHOD create_alv_list2.
DATA: ls_selected_line TYPE lvc_s_row,
lf_row_index TYPE lvc_index,
lt_celltab TYPE lvc_t_styl,
ls_celltab TYPE lvc_s_styl,
l_index TYPE i,
lt_exclude TYPE ui_functions
IF container23 is initial.
CREATE OBJECT container23
EXPORTING container_name = 'LIST_AREA2'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = g_repid
txt2 = sy-subrc
txt1 = 'Control element couldn't be created'(510).
ENDIF.
CREATE OBJECT alv_list2
EXPORTING i_parent = container23.
ELSE.
CALL METHOD alv_list2->refresh_table_display.
ENDIF. "IF container23 IS INITIAL.
* Layout
g_lvc_layout-grid_title = 'Edit the rows'.
g_lvc_layout-sel_mode = ' '.
g_lvc_layout-stylefname = 'CELLTAB'.
CLEAR: lt_celltab,
wa_lab_dispo2,
it_lab_dispo2,
wa_lab_dispo3,
it_lab_dispo3
* catch all selected rows from ALV-Grid1
CALL METHOD alv_list1->get_selected_rows
IMPORTING et_index_rows = it_lvc_rows.
* write the lines into the it_lab_dispo3
LOOP AT it_lvc_rows INTO ls_selected_line.
lf_row_index = ls_selected_line-index.
READ TABLE it_lab_dispo INDEX lf_row_index INTO wa_lab_dispo.
wa_lab_dispo3-lab_dispo_struk = wa_lab_dispo.
APPEND wa_lab_dispo3 TO it_lab_dispo3.
ENDLOOP.
CLEAR: wa_lab_dispo3.
* make the cell XBEME editable
LOOP AT it_lab_dispo3 INTO wa_lab_dispo3.
l_index = sy-tabix.
ls_celltab-FIELDNAME = 'XBEME'.
ls_celltab-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
ls_celltab-STYLE2 = SPACE.
ls_celltab-STYLE3 = SPACE.
ls_celltab-STYLE4 = SPACE.
INSERT ls_celltab INTO TABLE lt_celltab.
INSERT LINES OF lt_celltab INTO TABLE wa_lab_dispo3-celltab.
MODIFY it_lab_dispo3 FROM wa_lab_dispo3 INDEX l_index TRANSPORTING celltab.
ENDLOOP.
CALL METHOD alv_list2->set_ready_for_input
EXPORTING i_ready_for_input = 1.
PERFORM exclude_tb_functions CHANGING lt_exclude.
* display the second grid
CALL METHOD alv_list2->set_table_for_first_display
EXPORTING i_structure_name = 'zmm_lab_dispo'
i_save = 'A'
it_toolbar_excluding = lt_exclude
is_layout = g_lvc_layout
CHANGING
it_outtab = it_lab_dispo3[]
CALL METHOD cl_gui_control=>set_focus
EXPORTING control = alv_list2.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc <> 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = g_repid
txt2 = sy-subrc
txt1 = 'Error in Flush ALV'(500).
ENDIF.
ENDMETHOD.
<b>If I follow my coding by processing the application, I could see that in the Method "SET_VALUES (CL_ALV_VARIANT)" which was executed by "CALL METHOD alv_list2->set_table_for_first_display" the table "it_outtab" is just filled with the data of my selected rows!
And after this Method their called "FUNCTION K_KKB_PUT_GLOBALS" which has only one command: </b>
create data gs_table_row like es_table_row.
<b>And the gs_table_row has the needed deep-structure.
After it i cannot see any really intressting backend-functions related to my Problem.
</b>
I also try to do something with the fieldcatalog but in this case I only could add columns to the existing table which was editable.
Regards,
SteffenHi Steffen,
Just give the name in capital letters and try:
display the second grid
CALL METHOD alv_list2->set_table_for_first_display
EXPORTING i_structure_name = <b>'ZMM_LAB_DISPO'</b>
i_save = 'A'
it_toolbar_excluding = lt_exclude
is_layout = g_lvc_layout
CHANGING
it_outtab = it_lab_dispo3[]
REgards,
Ravi -
Hi
Im using ALV OOPS.o/p I have 10 records with checkbox(at user command I have to select record selected by check box). Now on the menu bar I hav a button for "SELECT ALL". If "selected all" 10 recored will be selected. If I filter upon some criteria no. of records will be 3..Now in GUI if I select SELECT all it will display 3 records r selected, but I have to process further internally ,,,but internally 10 records are selected. So how to write code for that is after filterring 3 records r selected and I "select all"..only 3 records will be selected instead of 10?
Part of my code like this..
SELECT all
CALL METHOD G_GRID->CHECK_CHANGED_DATA
IMPORTING
E_VALID = L_VALID.
IF L_VALID EQ 'X'.
LOOP AT PT_OUTTAB INTO LS_OUTTAB.
DATA LS_CELLTAB TYPE LVC_S_STYL.
LOOP AT PS_OUTTAB-CELLTAB INTO LS_CELLTAB.
IF LS_CELLTAB-FIELDNAME = 'CHECKBOX'.
IF LS_CELLTAB-STYLE EQ CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
P_LOCKED = 'X'.
ELSE.
P_LOCKED = SPACE.
ENDIF.
ENDIF.
ENDLOOP.
IF L_LOCKED IS INITIAL
AND NOT LS_OUTTAB-CHECKBOX EQ '-'.
LS_OUTTAB-CHECKBOX = 'X'.
ENDIF.
MODIFY PT_OUTTAB FROM LS_OUTTAB.
ENDLOOP.
CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY.
ENDIF.Hello Kaushik
Using method go_grid->GET_FILTERED_ENTRIES you get an index list of the filtered entries.
DATA: lt_filtered TYPE lvc_t_fidx,
ld_indx LIKE LINE OF lt_filtered.
CALL METHOD go_grid->GET_FILTERED_ENTRIES
IMPORTING
ET_FILTERED_ENTRIES = lt_filtered.
LOOP AT lt_filtered INTO ld_indx.
READ TABLE gt_outtab INTO ls_outtab INDEX ld_indx.
ENDLOOP.
Regards
Uwe -
Here's how to do ALV (OO) with dynamic fcat, int table and editable data
Hi everybody
Here's a more useful approach to ALV grid with OO using dynamic table, data NOT from DDIC, dynamic FCAT and how to get changed lines from the grid when ENTER key is pressed.
It's really not too dificult but I think this is more useful than the ever present SFLIGHT methods from the demos.
This also defines a subclass of cl_gui_alv_grid so you can access the protected attributes / methods of that class.
You don't need to add the class via SE24 -- done fron this ABAP.
When you run it click Edit for the first time.
After editing data press ENTER and the break point should bring you into the relevant method.
Code developed on NW2004S trial version but also works on rel 6.40 on a "Real" system.
The code should work without any changes on any system >=6.40.
All you need to do is to create a blank screen 100 via SE51 with a custom container on it called CCONTAINER1.
The rest of the code can just be uploaded into your system using the SE38 upload facility.
When running the program click on the EDIT button to enable the edit functionality of the grid.
Change your data and when you press ENTER you should get the break-point where you can see the original table and changed rows.
This program is actually quite general as it covers Dynamic tables, building a dynamic fcat where your table fields are NOT in the DDIC, intercepting the ENTER key via using an event, and accessing the protected attributes of the cl_gui_alv_grid by defining a subclass of this class in the abap.
I've seen various questions relating to all these functions but none in my view ever answers the questions in a simple manner. I hope this simple program will answer all these and show how using OO ALV is actually quite easy and people shouldn't be scared of using OO.
Have fun and award points if useful.
Cheers
Jimbo.
<b>PROGRAM zdynfieldcat.
Simple test of dynamic ITAB with user defined (not ddic) fields
Build dynamic fcat
use ALV grid to display and edit.
*When edit mode set to 1 toolbar gives possibility of adding and
*deleting rows.
*Define subclass of cl_gui_alv_grid so we can use protected attributes
*and methods.
Add event handler to intercept user entering data and pressing the
*ENTER key.
When enter key is pressed get actual value of NEW table (all rows)
rather than just the changed data.
*use new RTTI functionality to retrieve internal table structure
*details.
Create a blank screen 100 with a custom container called CCONTAINER1.
James Hawthorne
include <icon>.
define any old internal structure NOT in DDIC
types: begin of s_elements,
anyfield1(20) type c,
anyfield2(20) type c,
anyfield3(20) type c,
anyfield4(20) type c,
anyfield5(11) type n,
end of s_elements.
types: lt_rows type lvc_t_roid.
Note new RTTI functionality allows field detail retrieval
at runtime for dynamic tables.
data: wa_element type s_elements ,
wa_data type s_elements,
c_index type sy-index,
c_dec2 type s_elements-anyfield5,
wa_it_fldcat type lvc_s_fcat,
it_fldcat type lvc_t_fcat,
lr_rtti_struc TYPE REF TO cl_abap_structdescr, "RTTI
lt_comp TYPE cl_abap_structdescr=>component_table,"RTTI
ls_comp LIKE LINE OF lt_comp, "RTTI
zog like line of lr_rtti_struc->components, "RTTI
struct_grid_lset type lvc_s_layo,
l_valid type c,
new_table type ref to data.
field-symbols: <dyn_table> type standard table,
<actual_tab> type standard table,
<fs1> type ANY,
<FS2> TYPE TABLE.
data: grid_container1 type ref to cl_gui_custom_container.
class lcl_grid_event_receiver definition deferred.
data: g_event_receiver type ref to lcl_grid_event_receiver.
data: ls_modcell type LVC_S_MODI,
stab type ref to data,
sdog type s_elements. .
class lcl_grid_event_receiver definition.
public section.
methods:
handle_data_changed
for event data_changed of cl_gui_alv_grid
importing er_data_changed,
toolbar for event toolbar of cl_gui_alv_grid
importing e_object
e_interactive,
user_command for event user_command of cl_gui_alv_grid
importing e_ucomm.
endclass.
*implementation of Grid event-handler class
class lcl_grid_event_receiver implementation.
method handle_data_changed.
code whatever required after data entry.
various possibilites here as you can get back Cell(s) changed
columns or the entire updated table.
Data validation is also possible here.
perform check_data using er_data_changed.
endmethod.
Method for handling all creation/modification calls to the toolbar
method toolbar.
data : ls_toolbar type stb_button.
Define Custom Button in the toolbar
clear ls_toolbar.
move 0 to ls_toolbar-butn_type.
move 'EDIT' to ls_toolbar-function.
move space to ls_toolbar-disabled.
move 'Edit' to ls_toolbar-text.
move icon_change_text to ls_toolbar-icon.
move 'Click2Edit' to ls_toolbar-quickinfo.
append ls_toolbar to e_object->mt_toolbar.
clear ls_toolbar.
move 0 to ls_toolbar-butn_type.
move 'UPDA' to ls_toolbar-function.
move space to ls_toolbar-disabled.
move 'Update' to ls_toolbar-text.
move icon_system_save to ls_toolbar-icon.
move 'Click2Update' to ls_toolbar-quickinfo.
append ls_toolbar to e_object->mt_toolbar.
clear ls_toolbar.
move 0 to ls_toolbar-butn_type.
move 'EXIT' to ls_toolbar-function.
move space to ls_toolbar-disabled.
move 'Exit' to ls_toolbar-text.
move icon_system_end to ls_toolbar-icon.
move 'Click2Exit' to ls_toolbar-quickinfo.
append ls_toolbar to e_object->mt_toolbar.
endmethod.
method user_command.
case e_ucomm .
when 'EDIT'. "From Tool bar
perform set_input.
perform init_grid.
when 'UPDA'. "From Tool bar
perform refresh_disp.
perform update_table.
when 'EXIT'. "From Tool bar
leave program.
endcase.
endmethod.
endclass.
class zcltest definition inheriting from cl_gui_alv_grid.
define this as a subclass so we can access the protected attributes
of the superclass cl_gui_alv_grid
public section.
methods: constructor, disp_tab.
endclass.
need this now to instantiate object
as we are using subclass rather than the main cl_gui_alv_grid.
class zcltest implementation.
METHOD constructor.
CALL METHOD super->constructor
exporting i_appl_events = 'X'
i_parent = grid_container1.
endmethod.
method disp_tab.
FIELD-SYMBOLS: <outtab> TYPE STANDARD TABLE.
break-point 1.
mt_outtab is the data table held as a protected attribute
in class cl_gui_alv_grid.
ASSIGN me->mt_outtab->* TO <outtab>. "Original data
do whatever you want with <outtab>
contains data BEFORE changes each time.
Note that NEW (Changed) table has been obtained already by
call to form check_data USING P_ER_DATA_CHANGED
TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Entered data is in table defined by <fs2>
In this method you can compare original and changed data.
Easier than messing around with individual cells.
do what you want with data in <fs2> validate / update / merge etc
endmethod.
endclass.
data :
ok_code like sy-ucomm,
save_ok like sy-ucomm,
i4 type int4,
Container Object [grid_container]
now created via method constructor
in the subclass zcltest.
Control Object [grid]
grid1 type ref to zcltest,
Event-Handler Object [grid_handler]
grid_handler type ref to lcl_grid_event_receiver.
start-of-selection.
call screen 100.
module status_0100 output.
now display it as grid
if grid_container1 is initial.
create object grid_container1
exporting
container_name = 'CCONTAINER1'.
create object grid1.
break-point 1.
create object grid_handler.
set handler:
grid_handler->user_command for grid1,
grid_handler->toolbar for grid1,
grid_handler->handle_data_changed for grid1.
perform create_dynamic_fcat.
perform create_dynamic_itab.
perform populate_dynamic_itab.
perform init_grid.
perform register_enter_event.
set off ready for input initially
i4 = 0.
call method grid1->set_ready_for_input
exporting
i_ready_for_input = i4.
endif.
endmodule.
module user_command_0100 input.
*PAI not needed in OO ALV anymore as User Commands are handled as events
*in method user_command.
*we can also get control if the Data entered and the ENTER is pressed by
*raising an event.
Control then returns to method handle_data_changed.
endmodule.
form create_dynamic_fcat.
get structure of our user table for building field catalog
Use the RTTI functionality
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( wa_data ).
Build field catalog just use basic data here
colour specific columns as well
loop at lr_rtti_struc->components into zog.
c_index = c_index + 1.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype = zog-type_kind.
wa_it_fldcat-intlen = zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-lowercase = 'X'.
if c_index eq 2.
wa_it_fldcat-emphasize = 'C411'.
endif.
if c_index eq 3.
wa_it_fldcat-emphasize = 'C511'.
endif.
append wa_it_fldcat to it_fldcat .
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to field sysmbol.
Use dynamic field catalog just built.
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
endform.
form populate_dynamic_itab.
load up a line of the dynamic table
c_dec2 = c_dec2 + 11.
wa_element-anyfield1 = 'Tabbies'.
wa_element-anyfield2 = 'ger.shepards'.
wa_element-anyfield3 = 'White mice'.
wa_element-anyfield4 = 'Any old text'.
wa_element-anyfield5 = c_dec2.
append wa_element to <dyn_table>.
endform.
form check_data USING P_ER_DATA_CHANGED
TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Get altered data back
ASSIGN p_er_data_changed->mp_mod_rows TO <FS1>.
stab = p_er_data_changed->mp_mod_rows.
ASSIGN STAB->* TO <FS2>.
LOOP AT <FS2> INTO sdog.
ALV grid display with altered data is now in <fs2>.
do any extra processing you want here
endloop.
now display new table
call method grid1->disp_tab.
endform.
form exit_program.
call method grid_container1->free.
call method cl_gui_cfw=>flush.
leave program.
endform.
form refresh_disp.
call method grid1->refresh_table_display.
endform.
form update_table.
The dynamic table here is the changed table read from the grid
after user has changed it
Data can be saved to DB or whatever.
loop at <dyn_table> into wa_element.
do what you want with the data here
endloop.
switch off edit mode again for next function
i4 = 0.
call method grid1->set_ready_for_input
exporting
i_ready_for_input = i4.
endform.
form set_input.
i4 = 1.
call method grid1->set_ready_for_input
exporting
i_ready_for_input = i4.
endform.
form switch_input.
if i4 = 1.
i4 = 0.
else.
i4 = 1.
endif.
call method grid1->set_ready_for_input
exporting
i_ready_for_input = i4.
endform.
form init_grid.
Enabling the grid to edit mode,
struct_grid_lset-edit = 'X'. "To enable editing in ALV
struct_grid_lset-grid_title = 'Jimbos Test'.
call method grid1->set_table_for_first_display
exporting
is_layout = struct_grid_lset
changing
it_outtab = <dyn_table>
it_fieldcatalog = it_fldcat.
endform.
form register_enter_event.
call method grid1->register_edit_event
exporting
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Instantiate the event or it won't work.
create object g_event_receiver.
set handler g_event_receiver->handle_data_changed for grid1.
endform.</b>Hi there
IE7 doesn't give me the add new page option and I get 404 error when trying to access the "How to contribute" section.
I'll load up Firefox later (this browser usually works when IE7 doesn't always work properly).
I'll copy the stuff to the wiki when I've got the browser sorted out.
Cheers
jimbp -
hi all,
i am facing one problem regarding checkbox in alv.
i have to buttons on alv report as 'select all' (to select all) and 'send mail'(as i have to send mail to selected record)
wat i have done till now is:
1. when i run the report and cleck on checkboxes the action is reflected in internal table..n i can capture the data.
2.when i click on select all button all the records get selected and i can capture the data again.
now the problem :
when i clcik on "select all" and all the record get selected ..but when i deselect any of those record..the changes in internal table lost i.e. the checkbox field because empty for all the record.....
PLZ GIVE SOLUTION FOR FUNCTION "REUSE_ALV_GRID_DISPLAY" ONLY...
now the code:
************LAYOUT**************
DATA: gd_layout TYPE SLIS_LAYOUT_ALV.
gd_layout-colwidth_optimize = 'X'.
gd_layout-zebra = 'X'.
gd_layout-box_fieldname = 'CHECKBOX'.
gd_layout-box_tabname = 'IT_CONF'.
****alv display*************
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = 'Detailed List'
it_fieldcat = fieldcat
i_callback_program = sy-repid
i_callback_user_command = 'USER_CMD'
i_callback_pf_status_set = 'EMAILS'
IS_LAYOUT = gd_layout
TABLES
t_outtab = it_conf
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
endform. "alv_display
*& Form sush1
text
-->RT_EXTAB text
FORM emails USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'EMAILS'.
ENDFORM. "emails
*& Form user_cmd
text
-->P_UCOMM text
-->LS_SELFIELDtext
FORM user_cmd USING p_ucomm LIKE sy-ucomm ls_selfield type slis_selfield.
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA.
ENDIF.
IF p_ucomm = 'EMAIL'.
loop at it_conf where checkbox = 'X'.
**[[[[[[[U MAY NOT SEE THIS THIS IS FOR MAIL PUPOSE]]]]]]]]]]]]*********
select single sachn telnr into (tc_name , tc_num ) from t526
where SACHX = it_conf-zztc
and werks = it_conf-werks .
******find the emil of employee.
clear : p_0105,p_0105[].
CALL FUNCTION 'HR_READ_INFOTYPE'
EXPORTING
pernr = it_conf-pernr
infty = '0105'
BEGDA = pn-begda
ENDDA = pn-endda
TABLES
infty_tab = p_0105
EXCEPTIONS
infty_not_found = 1
OTHERS = 2.
if sy-subrc = 0.
read table p_0105 with key subty = 10.
move p_0105-USRID_LONG to email.
endif.
find immediate superior by Z FM.
clear pernr_s.
CALL FUNCTION 'ZHR_GET_IMMMED_SUPERIOR'
EXPORTING
pernr = it_conf-pernr
begda = '18000101'
endda = '99991231'
IMPORTING
v_pernr = pernr_s
EXCEPTIONS
not_found = 1
OTHERS = 2.
if sy-subrc = 0.
find the email of the immed. superiors personal number..
clear : p_0105,p_0105[].
CALL FUNCTION 'HR_READ_INFOTYPE'
EXPORTING
pernr = pernr_s
infty = '0105'
BEGDA = pn-begda
ENDDA = pn-endda
TABLES
infty_tab = p_0105
EXCEPTIONS
infty_not_found = 1
OTHERS = 2.
read table p_0105 with key subty = 10.
move p_0105-USRID_LONG to email_s.
endif.
if email <> ' '.
perform send_mail using it_conf-ename email email_s tc_name tc_num.
endif.
if email_s <> ' '.
perform send_mail using it_conf-ename email email_s tc_name tc_num.
endif.
****MAIL PART IS OVER*******************************************
endloop.
endif.
*****FOR "SELECT ALL " BUTTON**************
IF p_ucomm = 'SELECT'.
flag = 1.
loop at it_conf.
move 'X' to it_conf-checkbox.
MODIFY IT_CONF.
endloop.
ls_selfield-refresh = 'X'.
endif." Please see the code of myin in the 'SELECT' & 'DESELECT'.
case save_ok.
when 'EXIT'.
perform exit_program.
when 'SELECT'.
perform select_all_entries changing gt_outtab[].
when 'DESELECT'.
perform deselect_all_entries changing gt_outtab[].
when 'RESET'.
perform reset_selected_entries changing gt_outtab[].
when 'SWITCH'.
perform switch_activation changing gt_outtab[].
endcase.
form select_all_entries changing pt_outtab type standard table.
data: ls_outtab type gs_outtab.
data: l_valid type c,
l_locked type c.
*§A4ad. Before you (a)set, reset or (d)evaluate checkboxes,
* you must check the input cells.
* If all entries are ok, ALV transferes new values to the output
* table which you then can modify.
call method g_grid->check_changed_data
importing
e_valid = l_valid.
if l_valid eq 'X'.
loop at pt_outtab into ls_outtab.
perform check_lock using ls_outtab
changing l_locked.
if l_locked is initial
and not ls_outtab-checkbox eq '-'.
ls_outtab-checkbox = 'X'.
endif.
modify pt_outtab from ls_outtab.
endloop.
call method g_grid->refresh_table_display.
endif.
endform.
form check_lock using ps_outtab type gs_outtab
changing p_locked.
data ls_celltab type lvc_s_styl.
loop at ps_outtab-celltab into ls_celltab.
if ls_celltab-fieldname = 'CHECKBOX'.
if ls_celltab-style eq cl_gui_alv_grid=>mc_style_disabled.
p_locked = 'X'.
else.
p_locked = space.
endif.
endif.
endloop.
endform.
form deselect_all_entries changing pt_outtab type standard table.
data: ls_outtab type gs_outtab.
data: l_valid type c,
l_locked type c.
*§A4ad. Before you (a)set, reset or (d)evaluate checkboxes,
* you must check the input cells.
* If all entries are ok, ALV transferes new values to the output
* table which you then can modify.
call method g_grid->check_changed_data
importing
e_valid = l_valid.
if l_valid eq 'X'.
loop at pt_outtab into ls_outtab.
perform check_lock using ls_outtab
changing l_locked.
if l_locked is initial
and not ls_outtab-checkbox eq '-'.
ls_outtab-checkbox = ' '.
endif.
modify pt_outtab from ls_outtab.
endloop.
call method g_grid->refresh_table_display.
endif.
reward points if it is usefull ......
Girish -
Report with 5 ALV grids on 1 screen
I am trying to build a screen/report with 5 ALV grids which are interactive. One grid will display all sales order. When I click on a Sales order Hotspot, the items of the sales order would appear in the ALV grid box below.
When i click on an sales order item hotspot, i want the delivery information in another alv grid in the same screen.
There should be 2 more grids - one displaying the customer information -name,address, in one grid and one grid for open items if any. Any advice is welcome . Should I be creating a split container/docking container or multiple containers ? Sample code is welcome.
Edited by: Shareen Hegde on Apr 2, 2008 9:25 PMHello Shareen
Below I have added my sample report ZUS_SDN_THREE_ALV_GRIDS showing three interactive ALV grids. Perhaps it might be useful to you. I would prefer one or multiple splitter containers over multiple "stand-alone" containers.
*& Report ZUS_SDN_THREE_ALV_GRIDS
*& Display Customer data in three ALV lists:
*& 1st ALV: Customers
*& 2nd ALV: Sales order of selected customer (double-click)
*& 3rd ALV: Positions of selected sales order (double-click)
*& Double-click on material -> display material (MM02)
*& NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
*& Flow logic of dynpro '0100':
*&PROCESS BEFORE OUTPUT.
*& MODULE STATUS_0100.
*&PROCESS AFTER INPUT.
*& MODULE USER_COMMAND_0100.
REPORT zus_sdn_three_alv_grids.
DATA:
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_splitter_2 TYPE REF TO cl_gui_splitter_container,
go_cell_top TYPE REF TO cl_gui_container,
go_cell_bottom TYPE REF TO cl_gui_container,
go_cell_left TYPE REF TO cl_gui_container,
go_cell_right TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
go_grid3 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1,
gt_vbak TYPE STANDARD TABLE OF vbak,
gt_vbap TYPE STANDARD TABLE OF vbap.
PARAMETERS:
p_bukrs TYPE bukrs DEFAULT '1000'.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender. " sending control, i.e. ALV grid that raised event
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
ls_knb1 TYPE knb1,
ls_vbak TYPE vbak,
ls_vbap TYPE vbap.
* Distinguish according to sending grid instance
CASE sender.
WHEN go_grid1.
READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
CALL METHOD go_grid1->set_current_cell_via_id
EXPORTING
* IS_ROW_ID =
* IS_COLUMN_ID =
is_row_no = es_row_no.
* Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDERS' ).
WHEN go_grid2.
READ TABLE gt_vbak INTO ls_vbak INDEX e_row-index.
CHECK ( ls_vbak-vbeln IS NOT INITIAL ).
CALL METHOD go_grid1->set_current_cell_via_id
EXPORTING
* IS_ROW_ID =
* IS_COLUMN_ID =
is_row_no = es_row_no.
* Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN go_grid3.
READ TABLE gt_vbap INTO ls_vbap INDEX e_row-index.
CHECK ( ls_vbap-matnr IS NOT INITIAL ).
SET PARAMETER ID 'MAT' FIELD ls_vbap-matnr.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
WHEN OTHERS.
RETURN.
ENDCASE.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = p_bukrs.
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
EXPORTING
parent = go_docking
rows = 1
columns = 2
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_left.
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 2
RECEIVING
container = go_cell_right.
* Create 2nd splitter container
CREATE OBJECT go_splitter_2
EXPORTING
parent = go_cell_left
rows = 2
columns = 1
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter_2->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_top.
CALL METHOD go_splitter_2->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_cell_top
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
EXPORTING
i_parent = go_cell_bottom
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid3
EXPORTING
i_parent = go_cell_right
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid3.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'KNB1'
CHANGING
it_outtab = gt_knb1
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_vbak.
CALL METHOD go_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAK'
CHANGING
it_outtab = gt_vbak " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_vbap.
CALL METHOD go_grid3->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAP'
CHANGING
it_outtab = gt_vbap " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
CALL SCREEN '0100'.
* Flow logic of dynpro:
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "ORDERS"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Refresh display of detail ALV list
CALL METHOD go_grid3->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
* User has pushed button "Display Orders"
WHEN 'ORDERS'.
PERFORM customer_show_orders.
WHEN 'ORDER_DETAILS'.
PERFORM order_show_details.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form CUSTOMER_SHOW_ORDERS
* text
* --> p1 text
* <-- p2 text
FORM customer_show_orders .
* define local data
DATA:
ld_row TYPE i,
ls_knb1 TYPE knb1.
CALL METHOD go_grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM vbak INTO TABLE gt_vbak
WHERE kunnr = ls_knb1-kunnr.
REFRESH: gt_vbap.
ENDFORM. " CUSTOMER_SHOW_ORDERS
*& Form ORDER_SHOW_DETAILS
* text
* --> p1 text
* <-- p2 text
FORM order_show_details .
* define local data
DATA:
ld_row TYPE i,
ls_vbak TYPE vbak.
CALL METHOD go_grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_vbak INTO ls_vbak INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM vbap INTO TABLE gt_vbap
WHERE vbeln = ls_vbak-vbeln.
ENDFORM. " ORDER_SHOW_DETAILS
Regards
Uwe -
Regarding making hyperlink in OOPs ALV
Please see the following ALV Code. Its based on OOPs. There is no fieldcatalog defined in the program. In the output I want to make a hotspot on the filed VBELN & want to call T.code VA03 using SET PARAMETER ID. Please help. If I would have made it through Function Modules, It could have been easier as I can modify the fieldcatalog. Please help me urgently. Points will be rewarded.
*& Report ZTEST_OOPS_REPT1 *
REPORT ztest_oops_rept1 .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TYPE-POOLS: slis.
TABLES: vbak.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_vbak.
INCLUDE STRUCTURE vbak.
TYPES: END OF st_vbak.
TYPES: tt_vbak TYPE STANDARD TABLE OF st_vbak.
DATA: gi_vbak TYPE tt_vbak.
*declaration for fieldcatalog
DATA: lit_fieldcat TYPE slis_t_fieldcat_alv,
ls_fieldcat TYPE slis_fieldcat_alv.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_vbak TYPE st_vbak,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE vbak.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK ch1 WITH FRAME.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln OBLIGATORY.
SELECTION-SCREEN END OF BLOCK ch1.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS. "lcl_event_receiver DEFINITION
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "handle_toolbar
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD. "handle_user_command
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZTEST_ALV'.
SET TITLEBAR 'ZTEST_ALV'.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'SALES ORDER'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'. "B for single selection.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAK'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING
it_outtab = gi_vbak.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
text
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'BACK'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
text
FORM get_data.
Read data from table VBAK
SELECT *
FROM vbak
INTO TABLE gi_vbak
WHERE vbeln IN s_vbeln.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_vbak INDEX g_selected_row-index
INTO g_wa_vbak.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_vbak TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
Update traffic light field
Update database table
MODIFY vbak FROM g_screen200.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes
*& Module STATUS_0200 OUTPUT
text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'ZTEST_ALV'.
SET TITLEBAR 'ZTEST_ALV'.
ENDMODULE. " STATUS_0200 OUTPUT
" lit_fieldcat_initUse FM -LVC_FIELDCATALOG_MERGE to derive the field catalog for table VBAK. It will give you the field catalog. You can modify the column VBELN by changing HOTSPOT = 'X".
and in your code - at the method SET_TABLE_FOR....DISPLAY , you comment out the structure name and pass the modified field catalog.
Hope it helps. -
ALV report for 5 Grids using Objects and Method
I have few questions in ALV 5Grids ,could you please correct me in the following program logic...
Using this program logic i am able to generate the five Grids and able to populate Header details from VBAK into Grid1,If you click in the Grid 1 and it is populating item details in Grid2 from VBAP,parallally populating the customer data in Grid5 from KNA1.
Now the pending issue is ,
if you click in the Grid2 then we should populate the shipping details in Grid3 and
if you click in the Grid3 then we should populate the billing details in Grid4.
Program Logic;
REPORT ZAREPAS20.
Tables : vbak,vbap,likp,lips,vbrk,vbrp,kna1.
DATA : OK_CODE LIKE SY-UCOMM,
G_CONTAINER TYPE SCRFNAME VALUE 'BCALV7_GRID_DEMO_0100_VASU',
DOCKING TYPE REF TO CL_GUI_DOCKING_CONTAINER,
SPLITTER_1 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
SPLITTER_2 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
splitter_3 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
CELL_TOP1 TYPE REF TO CL_GUI_CONTAINER,
CELL_BOTTOM1 TYPE REF TO CL_GUI_CONTAINER,
CELL_TOP2 TYPE REF TO CL_GUI_CONTAINER,
CELL_BOTTOM2 TYPE REF TO CL_GUI_CONTAINER,
CELL_LEFT TYPE REF TO CL_GUI_CONTAINER,
CELL_middle TYPE REF TO CL_GUI_CONTAINER,
CELL_RIGHT TYPE REF TO CL_GUI_CONTAINER,
GRID1 TYPE REF TO CL_GUI_ALV_GRID,
GRID2 TYPE REF TO CL_GUI_ALV_GRID,
GRID3 TYPE REF TO CL_GUI_ALV_GRID,
GRID4 TYPE REF TO CL_GUI_ALV_GRID,
GRID5 TYPE REF TO CL_GUI_ALV_GRID.
DATA : GT_VBAK TYPE STANDARD TABLE OF VBAK,
GT_VBAP TYPE STANDARD TABLE OF VBAP,
GT_LIKP TYPE STANDARD TABLE OF likp,
GT_LIPS TYPE STANDARD TABLE OF lips,
GT_VBRK TYPE STANDARD TABLE OF vbrk,
GT_VBRP TYPE STANDARD TABLE OF vbrp,
GT_KNA1 TYPE STANDARD TABLE OF kna1.
DATA:begin of itab1 occurs 0,
vbeln type likp-VBELN,
erzet type likp-ERZET,
lfart type likp-LFART,
posnr type lips-POSNR,
END OF ITAB1.
DATA:begin of itab2 occurs 0,
vbeln like vbrk-vbeln,
posnr like vbrk-fktyp,
fkart like vbrk-fkart,
fklmg like vbrp-fklmg,
end of itab2.
*selection screen for selecting range of values
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
select-options: S_vbeln for VBAK-vbeln.
selection-screen end of block b1.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender. " sending control, i.e. ALV grid that raised event
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD HANDLE_DOUBLE_CLICK.
*DEFINE LOCAL DATA.
DATA : itab_vbak type VBAK,
itab_vbap type VBAP,
itab_likp type likp,
itab_lips type lips,
itab_vbrk type vbrk,
itab_vbrp type vbrp,
itab_kna1 type kna1.
*DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
CASE SENDER.
WHEN GRID1.
READ TABLE gt_VBAK INTO itab_vbak INDEX e_row-index.
CHECK ( itab_vbak-vbeln IS NOT INITIAL ).
CALL METHOD GRID1->set_current_cell_via_id
EXPORTING
is_ROW_ID =
is_COLUMN_ID =
is_row_no = es_row_no.
Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN GRID2.
READ TABLE gt_VBAP INTO itab_vbap INDEX e_row-index.
CHECK ( itab_vbap-vbeln IS NOT INITIAL ).
CALL METHOD GRID2->set_current_cell_via_id
EXPORTING
is_ROW_ID =
is_COLUMN_ID =
is_row_no = es_row_no.
Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN GRID3.
READ TABLE gt_LIPS INTO itab_LIPS INDEX e_row-index.
CHECK ( itab_lips-vgbel IS NOT INITIAL ).
CALL METHOD GRID3->set_current_cell_via_id
EXPORTING
is_ROW_ID =
is_COLUMN_ID =
is_row_no = es_row_no.
Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DELIVERY_DETAILS' ).
WHEN GRID4.
READ TABLE gt_VBRP INTO itab_VBRP INDEX e_row-index.
CHECK ( itab_vbrp-vgbel IS NOT INITIAL ).
CALL METHOD GRID4->set_current_cell_via_id
EXPORTING
is_ROW_ID =
is_COLUMN_ID =
is_row_no = es_row_no.
Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'BILLING_DETAILS' ).
WHEN GRID5.
READ TABLE gt_KNA1 INTO itab_KNA1 INDEX e_row-index.
CHECK ( itab_kna1-kunnr IS NOT INITIAL ).
SET PARAMETER ID 'KUN' FIELD itab_KNA1-KUNNR.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
WHEN OTHERS.
RETURN.
ENDCASE.
endmethod.
endclass. "lcl_eventhandler IMPLEMENTATION
start-of-selection.
*write :/ 'FEDEX INT''''L' .
SELECT * FROM vbak INTO TABLE gt_VBAK
where vbeln IN S_VBELN.
creating docking container
create object docking
exporting
parent = cl_gui_container=>screen0
ratio = 90
exceptions
others = 6.
if sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create splitter container
CREATE OBJECT splitter_1
EXPORTING
parent = docking
rows = 1
columns = 3
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_left.
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 2
RECEIVING
container = cell_middle.
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 3
RECEIVING
container = cell_right.
Create 2nd splitter container
CREATE OBJECT splitter_2
EXPORTING
parent = cell_left
rows = 2
columns = 1
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_2->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_top1.
CALL METHOD splitter_2->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = cell_bottom1.
Create 3rd splitter container
CREATE OBJECT splitter_3
EXPORTING
parent = cell_middle
rows = 2
columns = 1
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_3->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_top2.
CALL METHOD splitter_3->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = cell_bottom2.
Create ALV grids
CREATE OBJECT grid1
EXPORTING
i_parent = cell_top1
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid2
EXPORTING
i_parent = cell_bottom1
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid3
EXPORTING
i_parent = cell_top2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid4
EXPORTING
i_parent = cell_bottom2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid5
EXPORTING
i_parent = cell_right
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
Display data
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAK'
CHANGING
it_outtab = gt_VBAK
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_vbap.
CALL METHOD grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAP'
CHANGING
it_outtab = gt_VBAP " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_LIPS.
CALL METHOD grid3->set_table_for_first_display
EXPORTING
i_structure_name = 'LIPS'
CHANGING
it_outtab = gt_LIPS " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_VBRP.
CALL METHOD grid4->set_table_for_first_display
EXPORTING
i_structure_name = 'VBRP'
CHANGING
it_outtab = gt_VBRP " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_KNA1.
CALL METHOD grid5->set_table_for_first_display
EXPORTING
i_structure_name = 'KNA1'
CHANGING
it_outtab = gt_KNA1 " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Link the docking container to the target dynpro
CALL METHOD docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
CALL SCREEN '0100'.
Flow logic of dynpro:
*PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
*PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
end-of-selection.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
SET TITLEBAR 'xxx'.
Refresh display of detail ALV list
CALL METHOD grid2->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid3->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid4->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid5->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR
'EXIT' OR
'CANCEL'.
SET SCREEN 0.LEAVE SCREEN.
USER HAS PUSHED BUTTON "DISPLAY OREDERS"
WHEN 'ORDER_DETAILS'.
PERFORM ORDER_SHOW_DETAILS.
when 'DELIVERY_DETAILS'.
PERFORM DELIVERY_SHOW_DETAILS.
WHEN 'BILLING_DETAILS'.
PERFORM BILLING_SHOW_DETAILS.
WHEN OTHERS.
ENDCASE.
CLEAR : OK_CODE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ORDER_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM order_show_details .
define local data
DATA:
ld_row TYPE i,
itab_VBAK TYPE VBAK.
CALL METHOD grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_VBAK INTO itab_VBAK INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM KNA1 INTO TABLE gt_KNA1
WHERE KUNNR = itab_VBAK-KUNNR.
SELECT * FROM VBAP INTO TABLE gt_VBAP
WHERE VBELN = ITAB_VBAK-VBELN.
*REFRESH: gt_LIPS.
ENDFORM. " ORDER_SHOW_DETAILS
*& Form DELIVERY_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM DELIVERY_SHOW_DETAILS .
define local data
DATA:
ld_row TYPE i,
itab_VBAP TYPE VBAP.
CALL METHOD grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_VBAP INTO itab_VBAP INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT LIKPVBELN LIKPERZET LIKPLFART LIPSVBELN
INTO CORRESPONDING FIELDS OF TABLE ITAB1
FROM ( LIKP INNER JOIN LIPS ON LIKPVBELN = LIPSVBELN )
WHERE LIKP~VBELN IN S_VBELN.
*REFRESH: gt_LIPS.
ENDFORM. " DELIVERY_SHOW_DETAILS
*& Form BILLING_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM BILLING_SHOW_DETAILS .
define local data
DATA:
ld_row TYPE i,
itab_LIPS TYPE LIPS.
CALL METHOD grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_LIPS INTO itab_LIPS INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT VBRKVBELN VBRKFKTYP VBRKFKART VBRPFKLMG
INTO CORRESPONDING FIELDS OF TABLE ITAB2
FROM ( VBRK INNER JOIN VBRP ON VBRKVBELN = VBRPVBELN )
WHERE VBRK~VBELN IN S_VBELN.
ENDFORM. " BILLING_SHOW_DETAILSHi,
ALV means ABAP List Viewer. Most convenient way to use it is through reuse library (cf.
transaction se83) available from release 4.6 of SAP R/3.
ALV is available in two modes: list and grid. List mode is good old list processing with
standard functionnalities, and grid mode is using a new OCX object displaying grids.
Classical reports needs more coding to set the horizontal and vertical lines.we need to adjust
the lines manually.Even interactive also takes lot of code.
ALV reports reduces the code when compared to classical reports.we use function modules to
generate the output.
that r REUSE_ALV_LIST_DISPLAY,REUSE_ALV_GRID_DISPLAY,REUSE_ALV_HIERSEQ_LIST_DISPLAY etc..
the following threads will give some examples of the functions which you are expecting
Header
regarding function module
hide ALV field
Simply Display selection parameter values in the ALV OUTPUT
Drag and drop in a report
https://www.sdn.sap
Reprots
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you
use - ABAP Objects calls or simple function modules. -
Modify percentage total in Blocklist ALV
Hi Experts,
I want to modify the percentage total in the grand totals line.
for eg:
A B C
5 10 50 %
3 5 40%
Total
8 15 90%
Instead I want it to display : C = ( (15 - 8) / 15 ) * 100 = 46% .
The below code is working fine in case of ALV grid.
But how can I achieve the same in ALV BLOCKLIST . Please help.
FORM top_of_page .
*get global reference.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = lo_grid.
ET_FIELDCAT_LVC =
*get the subtotal
call method lo_grid->get_subtotals
importing
ep_collect00 = it_00.
change the data
ASSIGN it_00->* TO <ft_tab>.
LOOP AT <ft_tab> ASSIGNING <fs_tab>.
ASSIGN COMPONENT 'VAR_PCT' OF STRUCTURE <fs_tab> TO <ff_field>.
ASSIGN COMPONENT 'TOT_PLAN' OF STRUCTURE <fs_tab> to <fs_value1>.
ASSIGN COMPONENT 'TOT_ACTUAL' OF STRUCTURE <fs_tab> to <fs_value2>.
IF NOT <fs_value2> IS INITIAL.
<ff_field> = ( ( <fs_value2> - <fs_value1> ) / <fs_value2> ) * 100.
ENDIF.
ENDLOOP.
**Refresh the table display
CALL METHOD lo_grid->refresh_table_display
EXPORTING
i_soft_refresh = 'X'.
ENDFORM.
Thanks,
KiranHi Experts,
I want to modify the percentage total in the grand totals line.
for eg:
A B C
5 10 50 %
3 5 40%
Total
8 15 90%
Instead I want it to display : C = ( (15 - 8) / 15 ) * 100 = 46% .
The below code is working fine in case of ALV grid.
But how can I achieve the same in ALV BLOCKLIST . Please help.
FORM top_of_page .
*get global reference.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = lo_grid.
ET_FIELDCAT_LVC =
*get the subtotal
call method lo_grid->get_subtotals
importing
ep_collect00 = it_00.
change the data
ASSIGN it_00->* TO <ft_tab>.
LOOP AT <ft_tab> ASSIGNING <fs_tab>.
ASSIGN COMPONENT 'VAR_PCT' OF STRUCTURE <fs_tab> TO <ff_field>.
ASSIGN COMPONENT 'TOT_PLAN' OF STRUCTURE <fs_tab> to <fs_value1>.
ASSIGN COMPONENT 'TOT_ACTUAL' OF STRUCTURE <fs_tab> to <fs_value2>.
IF NOT <fs_value2> IS INITIAL.
<ff_field> = ( ( <fs_value2> - <fs_value1> ) / <fs_value2> ) * 100.
ENDIF.
ENDLOOP.
**Refresh the table display
CALL METHOD lo_grid->refresh_table_display
EXPORTING
i_soft_refresh = 'X'.
ENDFORM.
Thanks,
Kiran -
Do not include some lines in Subtotals and totals in ALV
Hello All,
I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
As of now I am using ALV grid display and doing the sums by
l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
<b>Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have</b>.
I will be thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.Hi,
see this code,
Complete code for the ALV grid example
This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
The example shows:
How to setup the ALV grid
How to ste focus to the grid
How to set the title of the grid
How to allow a user to save and reuse a grid layout (Variant)
How to customize the ALV grid toolbar
Refresh the grid
Set and get row selection and read line contents
Make and exception field (Traffic light)
Coloring a line
Steps:
Create screen 100 with the ALV grid. Remember to include an exit button
Add a change button to the ALV grid toolbar
Create screen 200 the Change screen
The screens:
The code:
REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for traffic light
TYPES: traffic_light TYPE c.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_sflight TYPE st_sflight,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
gs_layout-info_fname = 'LINE_COLOR'.
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
Value of traffic light field
g_wa_sflight-traffic_light = '1'.
Value of color field:
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'EXIT200'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
FORM get_data.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
clear g_wa_sflight-line_color.
ELSE.
g_wa_sflight-traffic_light = '3'.
clear g_wa_sflight-line_color.
ENDIF.
MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes -
Back from ALV Grid with multiple refresh
I have a report that from a selection screen shows an editable ALV Grid, and after I save it, it will refresh the grid.
My problem is when I hit the BACK button it returns to the "previous grid" instead of the selection screen
I am using the following:
WHEN 'BACK_C'.
LEAVE to SCREEN '0'.
How can I force it to go back to the selection screen?
sidenote: I have tried using call
selection-screen '1000'
but it adds a new problem as in the selection screen hitting back will return to the grid and I can never exit the report.Neither solution works.
If it helps, I'm refreshing the grid with:
DATA : ref_grid TYPE REF TO cl_gui_alv_grid.
IF ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref_grid.
ENDIF.
CALL METHOD ref_grid->refresh_table_display( ).
It seems when I refresh the grid it generates a completely independent grid screen and there's no way to skip them all and return to the selection screen. -
Return from ALV Grid to Selection screen
hi,
I want to go back from ALV grid to selection screen.
I am using the following code:
WHEN 'BACK'.
CALL METHOD grid1->refresh_table_display.
CALL METHOD grid1->free.
CALL METHOD custom_container1->free.
CALL SELECTION-SCREEN 1000.
it is working,but when i press BACK button from selection screen to program it is showing ERROR IN FLUSH 4 Error.
Also I tried with method FLUSH
WHEN 'BACK'.
CALL METHOD grid1->refresh_table_display.
CALL METHOD grid1->free.
CALL METHOD custom_container1->free.
CALL METHOD cl_gui_cfw=>flush.
it's still showing same Error.
Please help on this.
Regards,
SankarHi,
My grid name is grid1.
I tried with :
DATA grid1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = grid1.
CALL METHOD grid1->check_changed_data.
CALL METHOD grid1->refresh_table_display.
LEAVE TO SCREEN 0.
Even, I tried with declaring another grid : grid2
DATA grid1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = grid1.
CALL METHOD grid1->check_changed_data.
CALL METHOD grid1->refresh_table_display.
LEAVE TO SCREEN 0.
In both cases, I am getting the following Error : OBJECTS_OBJREF_NOT_ASSIGNED
Maybe you are looking for
-
I'm not sure what I've done but I need help please
Hi everyone. I seem to have done something really stupid. In the finder window, I renamed the 'folder' that has the house next to it, from Michaellastname just to Mike. Following that, I went into Front Row to watch a movie saved in my "Movie" folder
-
Why does some video need to be rendered in FCE 4 before I can work on it?
I've been trying to get a handle on FCE 4 because it's very different than iMovie '08. I have a bunch of content in iMovie that I'd like to mess with in FCE 4, so I exported from iMovie as FCE XML and imported in FCE. There is some video that I re-en
-
Cannot create workspace 10.2.0.1
New installation of 2.2.1 On 10g 10.2.0.1. Package referenced below will not compile and creating a new workspace throws the error below. I've installed bug patch 4554072. An upgrade from 2.0 on another box is running without issue. Any ideas. Thanks
-
Installed the latest version (5.0) of BB Desktop. It then downloaded and installed Roxio Media Manager, which always opens up trying to configure itself, and gives the error "Unrecognized character in the My Pictures path". Did a search of the regist
-
How to insert a copyright notice into a photo in iPhoto ?
I would like to insert copyright info into my photos to prevent unauthorized usage, Is this possible in iPhoto or does it require an external photo editing program?