ALV Report coloring columns

In my ALV report I am displaying SO & DN as separate columns. I want to give them each a different color.
In my BUILF_FIELDCATALOG, I tried the following but that gives them the same color i.e. blue. I would like to give them different colors. Also it puts them side by side even though when I comment the code out for the delivery, it goes back to the correct column.
     WHEN 'VBELN_VA'.
        wa_fieldcatalog-seltext_l = 'Order No.'.
        wa_fieldcatalog-reptext_ddic = 'Order No.'.
        wa_fieldcatalog-emphasize = 'X'.
        wa_fieldcatalog-key = 'X'.
        MOVE: wa_fieldcatalog-seltext_l TO wa_fieldcatalog-seltext_m,
              wa_fieldcatalog-seltext_l TO wa_fieldcatalog-seltext_s.
        ADD 1 TO wa_fieldcatalog-col_pos.
      WHEN 'VBELN_VL'.
        wa_fieldcatalog-seltext_l = 'Delivery'.
        wa_fieldcatalog-reptext_ddic = 'Delivery'.
*        wa_fieldcatalog-emphasize = 'X'.
*        wa_fieldcatalog-key = 'X'.
        MOVE: wa_fieldcatalog-seltext_l TO wa_fieldcatalog-seltext_m,
              wa_fieldcatalog-seltext_l TO wa_fieldcatalog-seltext_s.
        ADD 1 TO wa_fieldcatalog-col_pos.

Use the following Form to color the cells after building the field catalog ....
[code]
*&      Form SET_CELL_COLORS
      text
FORM SET_CELL_COLORS.
LOOP AT ITAB.
   L_INDEX = SY-TABIX.
   IF ITAB-VGBEL = 'DELETED'.
     LS_CELLCOLOR-FNAME = 'VGBEL'.
     LS_CELLCOLOR-COLOR-COL = '6'.
     LS_CELLCOLOR-COLOR-INT = '1'.
     LS_CELLCOLOR-COLOR-INV = '1'.
     APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
     MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
   ENDIF.
   IF ITAB-FACT = 'XXXXXX'.
     LS_CELLCOLOR-FNAME = 'FACT'.
     LS_CELLCOLOR-COLOR-COL = '3'.
     LS_CELLCOLOR-COLOR-INT = '1'.
     LS_CELLCOLOR-COLOR-INV = '1'.
     APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
     MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
   ENDIF.
     LS_CELLCOLOR-FNAME = 'CL_QUANT'.
     LS_CELLCOLOR-COLOR-COL = '6'.
     LS_CELLCOLOR-COLOR-INT = '0'.
     LS_CELLCOLOR-COLOR-INV = '1'.
     APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
     MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
ENDLOOP.
ENDFORM. " SET_CELL_COLORS
/code]

Similar Messages

On ALV report in1 column I want to put Icon on every row of that column.

On ALV report there is 1 column I want to put Icon on every row of that column.That ALV program uses object oriented concept all class and methods.
I want to use that icon on that row. That icon name is ICON_OKAY
In my program when I assign values to internal table at that time I am assigning that ICON_OKAY value to that row as follow.
Itab-
Itab-icon = ICON_OKAY.
Append itab.

please follow below procedure to display icon in ALV
1) In corresponding fieldcatelog entry do
fieldcatalog-icon = 'X'
2) While filling the internal table fill the corresponding key value of icon , for example ICON_OKAY value is '@0V@' so statement would be
Itab-icon = '@0V@'
to get list of corresponding key for icon open include <ICON> in se38

ALV Report - displaying column name in two fields.

Dear All,
I am working on ALV report , report is ready but now i have to format it according to client requirment, in which have to show column name in two row like.
supppose there is field by name
"Date of receipt of processed Goods"
can i display it like
"Date of receipt of
processed Goods "
Assured points for suitable answer.
Looking foward to your response.
Best Regards,
Gulrez Alam

Hi Ellery,
As Philipp said, there is no need for populating the field using PL/SQL. You would just need to go to the Paper Layout in the Reports Editor, click on "Text" in the Drawing toolbar, drag it to the appropriate place in your layout to create the field, and write what you want in that field. Below that, you can create the field(s) which will display the actual totals. I'm assuming that creating the totals field is not a problem.
Navneet.

Two line column heading in ALV Report

Hi Experts,
My requirement is that I have to create an ALV report with columns having two lines of headings. Like a main heading called Consultants under which 5 to 10 columns of departments(Dept Num, Num of Ppl , Manager etc. ) and then Contractors(Name, Address Etc ) underwhich there would be 5 to 10 departments. Right now my report has the depts of...
How can i do that . If u would suggest by CL_SALV_TABLE then it would be great.
Thanks a lot !
Sau

i don't think you can do it using cl_gui_alv_grid or cl_salv_table.

Print Preview and Export not working FROM ALV Report

Hi
I have this ALV report which is working fine. But when I try to do a print preview it doesn't show the columns which r sorted. The columns r there but the data starts from the one which is not sorted so the layout is all messed up. In the ALV report the columns that r sorted groups them into one, I mean they just show only one time rest of the row for the same thing is blank it doesn't repeat the same data in those column. I am not sure whether that's causing it or not.
Please help.

Hi Anwarul,
do not sort passing parameters for sorting. Create a layout (called ALV variant) or do the sorting online clicking columns(s) and sort icons. It will not change when displayed in print preview.
What function/object do you use?
Regards,
Clemens

Colors in ALV report - column wise

Hi,
I have a ALV report. I want color in my report like Column Wise.
ex.
Document No........Date.........Amount......Document No......Date........Amount........Document Nov........Date.............Amount....
2008000123...10.07.2009....2000.00......2008000133....10.07.2009....2000.00.....2008000143.......10.07.2009.......2000.00
2008000124...10.07.2009....2000.00......2008000134....10.07.2009....2000.00.....2008000144.......10.07.2009.......2000.00
2008000125...10.07.2009....2000.00......2008000135....10.07.2009....2000.00.....2008000145.......10.07.2009.......2000.00
Please see, there is 3 times Document No, Date and Amount. I want that there should come diff. colors for diff. document numbers.
It is possible or not. If yes, then how...
Thanks...

Hi,
go though this link....
i hope this will help u
TABLES:
SPFLI.
TYPE-POOLS:
SLIS.
PARAMETERS:
P_COL TYPE I ,
P_ROW TYPE I,
P_COLOR(4) TYPE C .
DATA:
T_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FS_FIELDCAT LIKE LINE OF T_FIELDCAT,
FS_LAYOUT TYPE SLIS_LAYOUT_ALV ,
W_COLOR(4) ,
W_ROW TYPE I,
W_FIELDNAME(20),
W_PROG TYPE SY-REPID.
DATA:
BEGIN OF T_SPFLI OCCURS 0,
COLOR(4),
CHECKBOX ,
CELL TYPE SLIS_T_SPECIALCOL_ALV,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
CITYFROM TYPE SPFLI-CITYFROM,
CITYTO TYPE SPFLI-CITYTO,
DISTANCE TYPE SPFLI-DISTANCE,
END OF T_SPFLI.
DATA:
FS_CELL LIKE LINE OF T_SPFLI-CELL.
SELECT *
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE T_SPFLI.
W_COLOR = P_COLOR.
T_SPFLI-COLOR = P_COLOR.
IF P_COL IS INITIAL AND P_ROW GT 0.
MODIFY T_SPFLI INDEX P_ROW TRANSPORTING COLOR.
ENDIF.
FS_FIELDCAT-FIELDNAME = 'CARRID'.
FS_FIELDCAT-REF_TABNAME = 'SPFLI'.
FS_FIELDCAT-COL_POS = 1.
FS_FIELDCAT-KEY = 'X'.
FS_FIELDCAT-HOTSPOT = 'X'.
APPEND FS_FIELDCAT TO T_FIELDCAT.
CLEAR FS_FIELDCAT .
FS_FIELDCAT-FIELDNAME = 'CONNID'.
FS_FIELDCAT-REF_TABNAME = 'SPFLI'.
FS_FIELDCAT-COL_POS = 2.
FS_FIELDCAT-KEY = 'X'.
FS_FIELDCAT-HOTSPOT = 'X'.
APPEND FS_FIELDCAT TO T_FIELDCAT.
CLEAR FS_FIELDCAT .
FS_FIELDCAT-FIELDNAME = 'DISTANCE'.
FS_FIELDCAT-REF_TABNAME = 'SPFLI'.
FS_FIELDCAT-COL_POS = 3.
FS_FIELDCAT-KEY = ' '.
FS_FIELDCAT-EDIT = 'X'.
APPEND FS_FIELDCAT TO T_FIELDCAT.
CLEAR FS_FIELDCAT.
FS_FIELDCAT-FIELDNAME = 'CITYFROM'.
FS_FIELDCAT-REF_TABNAME = 'SPFLI'.
FS_FIELDCAT-COL_POS = 4.
FS_FIELDCAT-KEY = ' '.
APPEND FS_FIELDCAT TO T_FIELDCAT.
LOOP AT T_FIELDCAT INTO FS_FIELDCAT.
IF FS_FIELDCAT-COL_POS EQ P_COL.
FS_FIELDCAT-EMPHASIZE = P_COLOR.
W_FIELDNAME = FS_FIELDCAT-FIELDNAME.
IF P_ROW IS INITIAL AND P_COL GT 0.
MODIFY T_FIELDCAT FROM FS_FIELDCAT TRANSPORTING EMPHASIZE.
ENDIF.
ENDIF.
ENDLOOP.
FS_CELL-FIELDNAME = W_FIELDNAME .
FS_CELL-COLOR-COL = 6.
FS_CELL-NOKEYCOL = 'X'.
APPEND FS_CELL TO T_SPFLI-CELL.
IF P_ROW IS NOT INITIAL AND P_COL IS NOT INITIAL.
MODIFY T_SPFLI INDEX P_ROW TRANSPORTING CELL.
ENDIF.
FS_LAYOUT-INFO_FIELDNAME = 'COLOR'.
FS_LAYOUT-BOX_FIELDNAME = 'CHECKBOX'.
FS_LAYOUT-COLTAB_FIELDNAME = 'CELL'.
FS_LAYOUT-F2CODE = '&ETA'.
W_PROG = SY-REPID.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = W_PROG
IS_LAYOUT = FS_LAYOUT
IT_FIELDCAT = T_FIELDCAT
TABLES
T_OUTTAB = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NOTE
Column and Row are colored with a coded color u2018Cxyzu2019.
 Where C: Color (coding must begin with C)
 X: Color Number
 Y: Bold
 Z: Inverse.
Thanks
Ashu

How to color row in ALV report?

hi
I am creating an ALV report using factory method.
my report is based on itab which contain 3 coulms, 1 column is ERROR_TYPE . how can i color all the rows which contain E in error_type ???
thanks
Ami

TABLES:LFA1.
SELECT-OPTIONS:LIFNR FOR LFA1-LIFNR.
DATA:BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
LAND1 LIKE LFA1-LAND1,
ORT01 LIKE LFA1-ORT01,
REGIO LIKE LFA1-REGIO,
SORTL LIKE LFA1-SORTL,
CFIELD(4) TYPE C,
END OF ITAB.
data:col(4).
data:num value '1'.
SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE LIFNR
IN LIFNR.
LOOP AT ITAB.
concatenate 'C' num '10' into col .
ITAB-CFIELD = col.
num = num + 1.
if num = '8'.
num = '1'.
endif.
MODIFY ITAB.
ENDLOOP.
TYPE-POOLS:SLIS.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA:LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:EVE TYPE SLIS_T_EVENT WITH HEADER LINE.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT-WINDOW_TITLEBAR = 'VENDORS DETAILS SCREEN'.
LAYOUT-EDIT = 'X'.
LAYOUT-info_fieldname = 'CFIELD'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_INCLNAME = SY-REPID
CHANGING
CT_FIELDCAT = FCAT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
this is for coloring cols
REPORT ZBHCOLOR_COLS.
TABLES:LFA1.
SELECT-OPTIONS:C_LIFNR FOR LFA1-LIFNR. " FOR GRID ONLY
PARAMETERS:LIST RADIOBUTTON GROUP ALV DEFAULT 'X',
GRID RADIOBUTTON GROUP ALV.
DATA:BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
LAND1 LIKE LFA1-LAND1,
ORT01 LIKE LFA1-ORT01,
SORTL LIKE LFA1-SORTL,
REGIO LIKE LFA1-REGIO,
COL TYPE LVC_T_SCOL,
END OF ITAB.
DATA:COLR TYPE LVC_S_SCOL.
SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE ITAB.
LOOP AT ITAB.
IF ITAB-LIFNR IN C_LIFNR.
COLR-FNAME = 'NAME1'.
COLR-COLOR-COL = '5'.
COLR-COLOR-INT = '1'.
COLR-COLOR-INV = '0'.
COLR-NOKEYCOL = 'X'.
APPEND COLR TO ITAB-COL.
COLR-FNAME = 'LIFNR'.
APPEND COLR TO ITAB-COL.
MODIFY ITAB.
ENDIF.
ENDLOOP.
TYPE-POOLS:SLIS.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA:LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-ZEBRA = 'X'.
layout-coltab_fieldname = 'COL'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_INCLNAME = SY-REPID
CHANGING
CT_FIELDCAT = FCAT.
IF LIST = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
ELSEIF GRID = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
ENDIF.
Reward points if useful.

Color a row in ALV report

Hi Freinds,
I want to color a particular row based on the condition in ALV report can any one tell me how to do it.
Thanx and advance,
Line

Hi,
REPORT zrnp_alv_so MESSAGE-ID z7new .
TABLE DECLARATION
TABLES: vbak , "Sales Document: Header Data
 vbap , "Sales Document: Item Data
 makt , "Material Descriptions
 lips . "SD document: Delivery: Item data
DECLARATION OF TYPE-POOL
*THIS TYPE-POOL CONTAINS THE EVENTS,
TYPE-POOLS : slis.
DECLARATION OF EVENTS
DATA: i_event TYPE slis_t_event.
DATA: t_event TYPE slis_alv_event.
DECLARATION OF LIST HEADER
DATA: i_listheader TYPE slis_t_listheader.
DECLARATION OF FIELD CATALOG FOR SCREEN 1
DATA: i_fldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DECLARATION OF FIELD CATALOG FOR SCREEN 2
DATA: i_fldcat2 TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DECLARATION OF FIELD LAYOUT
DATA: i_layout TYPE slis_layout_alv.
SORTING OF OUTPUT
DATA: i_sort TYPE slis_t_sortinfo_alv.
*DATA DECLARATION
DATA: v_auart TYPE tvak-auart,
 v_vkorg TYPE tvko-vkorg,
 v_kunnr TYPE kna1-kunnr,
 v_matnr TYPE mara-matnr ,
 v_spart TYPE tvta-spart .
TYPES: BEGIN OF it_so ,
 vbeln TYPE vbeln_va , "SALES ORDER NO.
 auart TYPE auart , "SALES DOC. TYPE
 vkorg TYPE vkorg , "SALES ORG.
 spart TYPE spart , "DIVISION
 kunnr TYPE kunag , "SOLD TO PARTY
 posnr TYPE posnr_va , "SALES DOC. ITEM
 matnr TYPE matnr , "MATERIAL NO
 maktx TYPE maktx , "DESCRIPTION
 kwmeng TYPE kwmeng , "QUANTITY
 vrkme TYPE vrkme , "SALES UNIT
 line_color(4) TYPE c ,
 END OF it_so .
TYPES: BEGIN OF it_del ,
 vbeln TYPE vbeln_vl , "SALES ORDER NO.
 posnr TYPE posnr_vl , "SALES DOC. ITEM
 matnr TYPE matnr , "MATERIAL NO
 werks TYPE werks_d , "PLANT
 lgort TYPE lgort_d , "STORAGE LOCATION
 charg TYPE charg_d , "BATCH NO.
 lfimg TYPE lfimg , "ACTUAL DELIVERY QTY.
 vrkme TYPE vrkme , "SALES UNIT
 END OF it_del .
TYPES: BEGIN OF type_vbfa ,
 vbelv TYPE vbeln_von , "Preceding sales and distribution document
 posnv TYPE posnr_von , "Preceding item of an SD document
 vbeln TYPE vbeln_nach, "Subsequent sales and distribution document
 posnn TYPE posnr_nach, "Document category of subsequent document
 vbtyp_n TYPE vbtyp_n ,
 END OF type_vbfa .
DATA: it_so1 TYPE STANDARD TABLE OF it_so ,
 it_del1 TYPE STANDARD TABLE OF it_del ,
 it_vbfa TYPE STANDARD TABLE OF type_vbfa,
 it_del_ful TYPE STANDARD TABLE OF it_del.
DATA: wa_so TYPE it_so ,
 wa_del TYPE it_del ,
 wa_vbfa TYPE type_vbfa,
 wa_it_del_ful TYPE it_del.
DATA: i_title_vbfa TYPE lvc_title VALUE 'SALES ORDER LIST DISPLAYED'.
DATA: i_title_vbpa TYPE lvc_title VALUE
'DELIVERY DETAILS DISPLAYED AGAINST GIVEN SALES ORDER'.
*SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-004 .
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln ,
 s_auart FOR v_auart ,
 s_vkorg FOR v_vkorg ,
 s_spart FOR v_spart ,
 s_kunnr FOR v_kunnr ,
 s_matnr FOR v_matnr .
SELECTION-SCREEN END OF BLOCK blk1 .
*AT SELECTION SCREEN *
AT SELECTION-SCREEN.
SELECT SINGLE vbeln
 FROM vbak INTO vbak-vbeln
 WHERE vbeln IN s_vbeln.
IF sy-subrc <> 0.
 MESSAGE e202.
ENDIF.
*START OF SELECTION *
START-OF-SELECTION .
PERFORM data_select.
PERFORM t_sort USING i_sort .
PERFORM event_cat USING i_event .
PERFORM fld_cat USING i_fldcat[] .
PERFORM t_layout USING i_layout .
PERFORM fld_cat2 USING i_fldcat2[] .
PERFORM call_alv.
DATA SELECT *
*& Form DATA_SELECT
 text
--> p1 text
<-- p2 text
FORM data_select .
REFRESH: it_vbfa, it_so1, it_del_ful ,it_del1 .
BREAK-POINT.
SELECT
 a~vbeln
 a~auart
 a~vkorg
 a~spart
 a~kunnr
 b~posnr
 b~matnr
 c~maktx
 b~kwmeng
 b~vrkme
 INTO TABLE it_so1 FROM vbak AS a
 JOIN vbap AS b ON bvbeln = avbeln
 JOIN makt AS c ON cmatnr = bmatnr
 AND c~spras = sy-langu
 WHERE a~vbeln IN s_vbeln .
COLURING DISPLAY *
DATA: ld_color(1) TYPE c .
LOOP AT it_so1 INTO wa_so.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
 i.e. wa_ekko-line_color = 'C410'
 ld_color = ld_color + 1.
Only 7 colours so need to reset color value
 IF ld_color = 8.
 ld_color = 1.
 ENDIF.
 CONCATENATE 'C' ld_color '10' INTO wa_so-line_color.
wa_ekko-line_color = 'C410'.
 MODIFY it_so1 FROM wa_so.
ENDLOOP .
IF sy-subrc = 0.
 SELECT vbelv
 posnv
 vbeln
 posnn
 vbtyp_n
 INTO TABLE it_vbfa
 FROM vbfa
 FOR ALL ENTRIES IN it_so1
 WHERE vbelv = it_so1-vbeln
 AND posnn = it_so1-posnr
 AND vbtyp_n ='J' .
 IF sy-subrc = 0.
 SELECT vbeln
 posnr
 matnr
 werks
 lgort
 charg
 lfimg
 vrkme
 FROM lips INTO TABLE it_del_ful
 FOR ALL ENTRIES IN it_vbfa
 WHERE vbeln = it_vbfa-vbeln
 AND posnr = it_vbfa-posnn.
 ENDIF.
ENDIF.
ENDFORM. " DATA_SELECT
EVENT CATALOG ****************************************
*& Form EVENT_CAT
 text
 -->P_I_EVENT text
FORM event_cat USING p_i_event TYPE slis_t_event .
REFRESH p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
 IMPORTING
 et_events = p_i_event
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE p_i_event WITH KEY name = slis_ev_top_of_page INTO t_event.
IF sy-subrc = 0.
 MOVE 'TOP_OF_PAGE' TO t_event-form.
 MODIFY p_i_event FROM t_event INDEX sy-tabix TRANSPORTING form.
ENDIF.
CLEAR t_event .
ENDFORM. " EVENT_CAT
*********FORM FOR EVENT TOP_OF_PAGE*********************************
FORM top_of_page .
REFRESH i_listheader.
DATA: t_header TYPE slis_listheader.
DATA: v_text(50).
WRITE sy-datum TO v_text.
CLEAR t_header.
t_header-typ = 'S'.
t_header-key = 'Date'.
t_header-info = v_text.
APPEND t_header TO i_listheader.
CLEAR t_header.
CLEAR v_text.
WRITE: 'SALES ORDER REPORT ' TO v_text .
t_header-typ = 'S'.
t_header-key = 'TITLE'.
t_header-info = v_text.
APPEND t_header TO i_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = i_listheader.
 I_LOGO = 'ALV_BACKGROUND'.
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
FIRST ALV GRID DISPLAY ***************************************
*& Form CALL_ALV
 text
--> p1 text
<-- p2 text
FORM call_alv .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 i_callback_user_command = 'USER_COMMAND1'
 i_callback_top_of_page = 'TOP_OF_PAGE'
 I_BACKGROUND_ID = 'ALV_BACKGROUND'
 i_grid_title = i_title_vbfa
 is_layout = i_layout
 it_fieldcat = i_fldcat[]
 it_sort = i_sort
 it_events = i_event
 TABLES
 t_outtab = it_so1
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " CALL_ALV
FIRST FIELDCATALOG *************************************
*& Form FLD_CAT
 text
 -->P_I_FLDCAT[] text
FORM fld_cat USING p_i_fldcat TYPE slis_t_fieldcat_alv.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m = 'SALES ORDER NO.'.
i_fldcat-col_pos = 1. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'AUART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m = 'SALES DOC. TYPE'.
i_fldcat-col_pos = 2. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VKORG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES ORG.'.
i_fldcat-col_pos = 3. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 12. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'SPART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'DIVISION'.
i_fldcat-col_pos = 4. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 10. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'KUNNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SOLD TO PARTY'.
i_fldcat-col_pos = 5. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES DOC. ITEM'.
i_fldcat-col_pos = 6. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 17. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'MATERIAL NO.'.
i_fldcat-col_pos = 7. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'MAKTX'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'DESCRIPTION'.
i_fldcat-col_pos = 8. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'KWMENG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'QUANTITY'.
i_fldcat-col_pos = 9. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-do_sum = 'X'. " For doing "SUM"
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES UNIT'.
i_fldcat-col_pos = 10. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 10. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
ENDFORM. " FLD_CAT
ALV SORTING ***************************************
*& Form SORT
 text
 -->P_I_SORT text
FORM t_sort USING p_i_sort TYPE slis_t_sortinfo_alv .
DATA: i_sort TYPE slis_sortinfo_alv .
REFRESH p_i_sort .
CLEAR i_sort.
i_sort-spos = 1.
i_sort-tabname = 'IT_SO1'.
i_sort-fieldname = 'VBELN'.
i_sort-up = 'X'.
i_sort-subtot = 'X'.
i_sort-group = '*'.
APPEND i_sort TO p_i_sort.
ENDFORM. " SORT
*FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'.
*ENDFORM. "Set_pf_status
**********FORM FOR EVENT USER_COMMAND1*******************************
FORM user_command1 USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
*CASE R_UCOMM .
 WHEN '&IC1' .
 IF rs_selfield-FIELDNAME = 'VBELN' .
 ENDIF .
WHEN OTHERS .
ENDCASE .
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
 READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
 IF sy-subrc = 0.
 LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_so-vbeln
 AND posnv = wa_so-posnr.
 READ TABLE it_del_ful INTO wa_it_del_ful
 WITH KEY vbeln = wa_vbfa-vbelv
 posnr = wa_vbfa-posnn.
 IF sy-subrc = 0.
 CLEAR wa_del.
 MOVE wa_it_del_ful TO wa_del.
 APPEND wa_del TO it_del1.
 ENDIF.
 ENDLOOP.
 ENDIF.
ENDIF.
SECOND ALV GRID DISPLAY ***********************************
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 i_callback_user_command = 'USER_COMMAND2'
 i_callback_top_of_page = 'TOP_OF_PAGE'
 I_BACKGROUND_ID = 'ALV_BACKGROUND'
 i_grid_title = i_title_vbpa
 it_fieldcat = i_fldcat2[]
 it_sort = i_sort
 TABLES
 t_outtab = it_del_ful
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM . "USER_COMMAND1
FORM FOR EVENT USER_COMMAND 2 ******************************
FORM user_command2 USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
 READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
 IF SY-SUBRC = 0.
 LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = WA_SO-vbeln
 AND posnv = WA_SO-posnr.
 READ TABLE it_del_ful INTO wa_it_del_ful
 WITH KEY vbeln = rs_selfield-value
 posnr = wa_vbfa-posnn.
 IF rs_selfield-fieldname = 'VBELN'.
 SET PARAMETER ID 'VL' FIELD wa_vbfa-vbeln .
 CALL TRANSACTION 'VL03' AND SKIP FIRST SCREEN.
 ENDIF .
 ENDLOOP.
 ENDIF.
ENDIF.
ENDFORM . "USER_COMMAND2
SECOND FIELDCATALOG ******************************************
*& Form FLD_CAT2
 text
 -->P_I_FLDCAT2[] text
FORM fld_cat2 USING p_i_fldcat2 TYPE slis_t_fieldcat_alv .
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-tabname = 'IT_DEL_FUL'."TABLE NAME
i_fldcat2-seltext_m = 'DELIVERY NO.'.
i_fldcat2-col_pos = 1. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-hotspot = 'X'.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'DELIVERY ITEM'.
i_fldcat2-col_pos = 2. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'MATERIAL NO.'.
i_fldcat2-col_pos = 3. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'WERKS'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'PLANT.'.
i_fldcat2-col_pos = 4. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'LGORT'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'ST. LOCATION'.
i_fldcat2-col_pos = 5. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'CHARG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'BATCH NO.'.
i_fldcat2-col_pos = 6. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'LFIMG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'ACT. DEL. QTY.'.
i_fldcat2-col_pos = 7. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'SALES UNIT.'.
i_fldcat2-col_pos = 8. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
ENDFORM. " FLD_CAT2
ALV LAYOUT *******************************************
*& Form LAYOUT
 text
 -->P_I_LAYOUT text
FORM t_layout USING p_i_layout TYPE slis_layout_alv .
p_i_layout-zebra = 'X'.
p_i_layout-totals_text = 'GRAND TOTAL ='.
p_i_layout-CONFIRMATION_PROMPT = 'X'.
p_i_layout-DEF_STATUS = ' '.
p_i_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM. " LAYOUT
Note: Reward points if helpful.

Display Color for sigle CELL in ALV report

Hi all,
I have one doubt is it possible to make a particular cell as read color in ALV.
Ex: I have one field which shows amount in my ALV report,My requirement is that when ever the amount is less then 'ZERO', I have to show that particular cell in read color.
Regards
Anil Kumar.N

hi,
here code for coloring a perticular cell
TYPE-POOLS:slis.
TABLES:mara,
 makt,
 marc.
DATA:BEGIN OF itab OCCURS 0,
 matnr LIKE mara-matnr,
 maktx LIKE makt-maktx,
 werks LIKE marc-werks,
 mtart LIKE mara-mtart,
 matkl LIKE mara-matkl,
 meins LIKE mara-meins,
 ntgew LIKE mara-ntgew,
 rowcolor(4) TYPE c,
 cellcolors TYPE lvc_t_scol,
 END OF itab.
DATA:t_fcat TYPE slis_t_fieldcat_alv,
 t_eve TYPE slis_t_event.
DATA : st_layout TYPE slis_layout_alv.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:mat FOR mara-matnr. " no intervals no-extension.
*PARAMETERS:mat LIKE mara-matnr.
SELECTION-SCREEN:END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_cata USING t_fcat.
PERFORM build_event.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM display_data.
*& Form build_cata
 text
 -->TEMP_FCAT text
FORM build_cata USING temp_fcat TYPE slis_t_fieldcat_alv.
sy-tvar0 = sy-uname.
WRITE sy-datum TO sy-tvar1.
DATA:wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'Material'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Description'.
wa_fcat-fix_column = 'x'.
wa_fcat-key = 'X'. "To color a column
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Plant'.
wa_fcat-key = ' '.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MTART'.
wa_fcat-seltext_m = 'Type'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATKL'.
wa_fcat-seltext_m = 'Group'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MEINS'.
wa_fcat-seltext_m = 'Measurement Unit'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'NTGEW'.
wa_fcat-seltext_m = 'Net Value'.
APPEND wa_fcat TO temp_fcat.
ENDFORM. "build_cata
*& Form build_event
 text
FORM build_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = t_eve
 EXCEPTIONS
 list_type_wrong = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "build_event
*& Form data_retrieval
 text
FORM data_retrieval.
SELECT maramatnr maramtart maramatkl marameins mara~ntgew
 maktmaktx marcwerks
INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt ON
maramatnr = maktmatnr
INNER JOIN marc ON
maramatnr = marcmatnr
WHERE mara~matnr IN mat.
SORT itab BY matnr.
DELETE ADJACENT DUPLICATES FROM itab.
ENDFORM. "data_retrieval
*& Form display_data
 text
FORM display_data.
*******************************For setting Cell Color*******************************************
DATA ls_cellcolor TYPE lvc_s_scol .
st_layout-coltab_fieldname = 'CELLCOLORS'.
READ TABLE itab INDEX 5 .
ls_cellcolor-fname = 'MATNR' .
ls_cellcolor-color-col = '1' .
ls_cellcolor-color-int = '1' .
APPEND ls_cellcolor TO itab-cellcolors .
MODIFY itab INDEX 5 .
st_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = 'ZALV_DS'
 is_layout = st_layout
 i_save = 'A'
 it_fieldcat = t_fcat
 it_events = t_eve
 TABLES
 t_outtab = itab
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_data
Please reward if useful...

Dynamic columns in report... NON ALV REPORT

Hey Guys,
I have a internal table which has abt 50 columns now i wanna show only the columns that have any value in it...
Now this is not an ALV report... this is a basic report....
So anyideas as to where i can start on this.... i dont want to write if conditions...
i am tryin to make this as elegent as possible...
all help will be appreciated
Thanks

Hi,
Try this..
In this example..I have an internal table with the columns MATNR, WERKS, LGORT & MENGE...The ITAB is having value only for matnr and werks..It will print only MATNR and WERKS in the output..
* Data declarations.
DATA: BEGIN OF itab OCCURS 0,
 matnr TYPE matnr,
 werks TYPE werks_d,
 lgort TYPE mard-lgort,
 menge TYPE ekpo-menge,
 END OF itab.
DATA: BEGIN OF itab_desc OCCURS 0,
 compname(30),
 text(20),
 END OF itab_desc.
DATA: v_repid TYPE syrepid.
DATA: t_comp LIKE rstrucinfo OCCURS 0 WITH HEADER LINE.
FIELD-SYMBOLS: <fs>.
DATA: t_allowed_fields(30) OCCURS 0 WITH HEADER LINE.
* Program.
v_repid = sy-repid.
* Sample data.
itab-matnr = 'TEST'. itab-lgort = '0001'.APPEND itab.
itab-matnr = 'TEST12'. itab-lgort = '0001'.APPEND itab.
itab-matnr = 'TEST123'.itab-lgort = '0001'.APPEND itab.
* Store the columns texts.
itab_desc-compname = 'MATNR'. itab_desc-text = 'Material'.
APPEND itab_desc.
itab_desc-compname = 'WERKS'. itab_desc-text = 'Plant'.
APPEND itab_desc.
itab_desc-compname = 'LGORT'. itab_desc-text = 'Sto. Loc'.
APPEND itab_desc.
itab_desc-compname = 'MENGE'. itab_desc-text = 'Quantity'.
APPEND itab_desc.
* Get the components for that internal table.
CALL FUNCTION 'GET_COMPONENT_LIST'
 EXPORTING
 program = v_repid
 fieldname = 'ITAB'
 TABLES
 components = t_comp.
* Get the columns that has some value.
LOOP AT t_comp.
LOOP AT itab.
 ASSIGN COMPONENT t_comp-compname OF STRUCTURE itab TO <fs>.
 IF NOT <fs> IS INITIAL.
 EXIT.
 ENDIF.
ENDLOOP.
Allowed columns.
IF NOT <fs> IS INITIAL.
 t_allowed_fields = t_comp-compname.
 APPEND t_allowed_fields.
ENDIF.
ENDLOOP.
* Print the Header.
LOOP AT t_allowed_fields.
READ TABLE t_comp WITH KEY compname = t_allowed_fields.
READ TABLE itab_desc WITH KEY compname = t_allowed_fields.
WRITE: AT (t_comp-olen) itab_desc-text COLOR COL_HEADING.
ENDLOOP.
* Print the data.
LOOP AT itab.
WRITE: / space.
LOOP AT t_allowed_fields.
 READ TABLE t_comp WITH KEY compname = t_allowed_fields.
 ASSIGN COMPONENT t_comp-compname OF STRUCTURE itab TO <fs>.
 WRITE: AT (t_comp-olen) <fs>.
ENDLOOP.
ENDLOOP.
Thanks,
Naren

Coloring column in an ALV tree

Hi all,
What I want to do is set background color for columns in a tree-view ALV(class cl_gui_alv_tree). However no matter how I set the field EMPHASIZE in the fieldcatalog internal table, the display of the ALV tree keeps unchange. Anyone can help me on this?
Thanks,
Chen Chang

Hi,
If u want to change the node colr in ALV tree do as follows
Adding Root Nodes for the tree.
Key:
NODE_KEY, RELATKEY, RELATSHIP, HIDDEN, DISABLED, ISFOLDER, N_IMAGE,
EXP_IMAGE, STYLE, LAST_HITEM, NO_BRANCH, EXPANDER, DRAGDROPID, TEXT
perform f9101_node_list using: '1' 'ROOT' '' '' '' c_x '' '' '' '' ''
 c_x '' text-003.
Adding subitems for the root node.
perform f9101_node_list using:
 Material Details
 'MATRL' '1' '' '' '' '' '' '' '' '' '' '' ''
 text-001,
 Document Details
 'DOCU' '1' '' '' '' '' '' '' '' '' '' '' ''
 text-002.
form f9101_node_list using value(pnodekey)
 value(prelatkey)
 value(prelatship)
 value(phidden)
 value(pdisabled)
 value(pisfolder)
 value(pimage)
 value(pexpimage)
 value(pstyle)
 value(plastitem)
 value(pnobranch)
 value(pexpander)
 value(pdragdropid)
 value(ptext).
w_nodes-node_key = pnodekey.
w_nodes-relatkey = prelatkey.
w_nodes-relatship = prelatship. "Natural number
w_nodes-hidden = phidden.
w_nodes-disabled = pdisabled.
w_nodes-isfolder = pisfolder.
w_nodes-n_image = pimage. "Icons / embedded bitmap
w_nodes-exp_image = pexpimage. "Icons / embedded bitmap
 w_nodes-style = pstyle. w_nodes-last_hitem = plastitem. "Tree Control: Column Name / Item
"Name
w_nodes-no_branch = pnobranch.
w_nodes-expander = pexpander.
w_nodes-dragdropid = pdragdropid.
w_nodes-text = ptext.
append w_nodes to i_nodes.
endform. " f9101_node_list
Try changing the style so that u can change the column color.
If u want that in ALV grid
1. different color in line of alv
2. Coloring Cells/rows in ALV Grid.
Got this from forum
report .
Use of colours in ALV grid (cell, line and column) *
Table
tables : mara.
Type
types : begin of ty_mara,
matnr like mara-matnr,
matkl like mara-matkl,
counter(4) type n,
free_text(15) type c,
color_line(4) type c, " Line color
color_cell type lvc_t_scol, " Cell color
end of ty_mara.
Structures
data : wa_mara type ty_mara,
wa_fieldcat type lvc_s_fcat,
is_layout type lvc_s_layo,
wa_color type lvc_s_scol.
Internal table
data : it_mara type standard table of ty_mara,
it_fieldcat type standard table of lvc_s_fcat,
it_color type table of lvc_s_scol.
Variables
data : okcode like sy-ucomm,
w_alv_grid type ref to cl_gui_alv_grid,
w_docking_container type ref to cl_gui_docking_container.
parameters : p_column as checkbox,
p_line as checkbox,
p_cell as checkbox.
at selection-screen output.
perform get_data.
perform fill_catalog.
if w_docking_container is initial.
perform create_objects.
endif.
*& Form create_objects
form create_objects.
create object w_docking_container
exporting
ratio = 60
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
create object w_alv_grid
exporting
i_parent = w_docking_container.
Field that identify color line in internal table
move 'COLOR_LINE' to is_layout-info_fname.
Field that identify cell color in inetrnal table
move 'COLOR_CELL' to is_layout-ctab_fname.
call method w_alv_grid->set_table_for_first_display
exporting
is_layout = is_layout
changing
it_outtab = it_mara
it_fieldcatalog = it_fieldcat
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4.
endform.
*& Form get_data
form get_data.
select * from mara up to 5 rows.
clear : wa_mara-color_line, wa_mara-color_cell.
move-corresponding mara to wa_mara.
add 1 to wa_mara-counter.
move 'Blabla' to wa_mara-free_text.
if wa_mara-counter = '0002'
and p_line = 'X'.
Color line move 'C410' to wa_mara-color_line.
elseif wa_mara-counter = '0004'
and p_cell = 'X'.
Color cell
move 'FREE_TEXT' to wa_color-fname.
move '6' to wa_color-color-col.
move '1' to wa_color-color-int.
move '1' to wa_color-color-inv.
append wa_color to it_color.
wa_mara-color_cell[] = it_color[].
endif.
append wa_mara to it_mara.
endselect.
endform.
*& Form fill_catalog
form fill_catalog.
Colour code : *
Colour is a 4-char field where : *
- 1st char = C (color property) *
- 2nd char = color code (from 0 to 7) *
0 = background color *
1 = blue *
2 = gray *
3 = yellow *
4 = blue/gray *
5 = green *
6 = red *
7 = orange *
- 3rd char = intensified (0=off, 1=on) *
- 4th char = inverse display (0=off, 1=on) *
Colour overwriting priority : *
1. Line *
2. Cell *
3. Column *
data : w_position type i value '1'.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'MATNR' to wa_fieldcat-fieldname.
move 'MARA' to wa_fieldcat-ref_table.
move 'MATNR' to wa_fieldcat-ref_field.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'MATKL' to wa_fieldcat-fieldname.
move 'MARA' to wa_fieldcat-ref_table.
move 'MATKL' to wa_fieldcat-ref_field.
Color column
if p_column = 'X'.
move 'C610' to wa_fieldcat-emphasize.
endif.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'COUNTER' to wa_fieldcat-fieldname.
move 'N' to wa_fieldcat-inttype.
move '4' to wa_fieldcat-intlen.
move 'Counter' to wa_fieldcat-coltext.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'FREE_TEXT' to wa_fieldcat-fieldname.
move 'C' to wa_fieldcat-inttype.
move '20' to wa_fieldcat-intlen.
move 'Text' to wa_fieldcat-coltext.
append wa_fieldcat to it_fieldcat.
endform.
Check this link to get code for different colors http://www.sapdesignguild.org/resources/ma_guidelines/VisualDesignRules/colors.html
Try this out the same thing will work for Reuse also.
Thanks & Regards,
Judith.
Message was edited by: Judith Jessie Selvi

ALV report with dynamic columns, and repeated structure rows

Hey Guys,
I've done some ALV programming, but most of the reports were straight forward. This one is a little interesting. So here go the questions...
Q1: Regarding Columns:
What is the best way to code a report with columns being dynamic. This is one of the parameters the user is going to enter in his input.
Q2: Regarding Rows:
I want to repeat a structure(say it contains f1, f2, f3) multiple time in rows. What is the best way to do it? The labels for these fields have to appear in the first column.
Below is the visual representation of the questions.
Jan 06 , Feb 06, Mar 06....(dynamic)
 material 1
Current Stock
current required
$Value of stock
 material 2
Current Stock
current required
$Value of stock
 material 3
Current Stock
current required
$Value of stock
Thanks for your help.
Sumit.

Hi Sumit,
Just check this sample from one of the SAP site
ABAP Code Sample for Dynamic Table for ALV with Cell Coloring
Applies To:
ABAP / ALV Grid
Article Summary
ABAP Code Sample that uses dynamic programming techniques to build a dynamic internal table for display in an ALV Grid with Cell Coloring.
Code Sample
REPORT zcdf_dynamic_table.
* Dynamic ALV Grid with Cell Coloring.
* Build a field catalog dynamically and provide the ability to color
* the cells.
* To test, copy this code to any program name and create screen 100
* as described in the comments. After the screen is displayed, hit
* enter to exit the screen.
* Tested in 4.6C and 6.20
* Charles Folwell - [email protected] - Feb 2, 2005
DATA:
r_dyn_table TYPE REF TO data,
r_wa_dyn_table TYPE REF TO data,
r_dock_ctnr TYPE REF TO cl_gui_docking_container,
r_alv_grid TYPE REF TO cl_gui_alv_grid,
t_fieldcat1 TYPE lvc_t_fcat, "with cell color
t_fieldcat2 TYPE lvc_t_fcat, "without cell color
wa_fieldcat LIKE LINE OF t_fieldcat1,
wa_cellcolors TYPE LINE OF lvc_t_scol,
wa_is_layout TYPE lvc_s_layo.
FIELD-SYMBOLS:
<t_dyn_table> TYPE STANDARD TABLE,
<wa_dyn_table> TYPE ANY,
<t_cellcolors> TYPE lvc_t_scol,
<w_field> TYPE ANY.
START-OF-SELECTION.
* Build field catalog based on your criteria.
wa_fieldcat-fieldname = 'FIELD1'.
wa_fieldcat-inttype = 'C'.
wa_fieldcat-outputlen = '10'.
wa_fieldcat-coltext = 'My Field 1'.
wa_fieldcat-seltext = wa_fieldcat-coltext.
APPEND wa_fieldcat TO t_fieldcat1.
wa_fieldcat-fieldname = 'FIELD2'.
wa_fieldcat-inttype = 'C'.
wa_fieldcat-outputlen = '10'.
wa_fieldcat-coltext = 'My Field 2'.
wa_fieldcat-seltext = wa_fieldcat-coltext.
APPEND wa_fieldcat TO t_fieldcat1.
* Before adding cell color table, save fieldcatalog to pass
* to ALV call. The ALV call needs a fieldcatalog without
* the internal table for cell coloring.
t_fieldcat2[] = t_fieldcat1[].
* Add cell color table.
* CALENDAR_TYPE is a structure in the dictionary with a
* field called COLTAB of type LVC_T_SCOL. You can use
* any structure and field that has the type LVC_T_SCOL.
wa_fieldcat-fieldname = 'T_CELLCOLORS'.
wa_fieldcat-ref_field = 'COLTAB'.
wa_fieldcat-ref_table = 'CALENDAR_TYPE'.
APPEND wa_fieldcat TO t_fieldcat1.
* Create dynamic table including the internal table
* for cell coloring.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fieldcat1
IMPORTING
ep_table = r_dyn_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Get access to new table using field symbol.
ASSIGN r_dyn_table->* TO <t_dyn_table>.
* Create work area for new table.
CREATE DATA r_wa_dyn_table LIKE LINE OF <t_dyn_table>.
* Get access to new work area using field symbol.
ASSIGN r_wa_dyn_table->* TO <wa_dyn_table>.
* Get data into table from somewhere. Field names are
* known at this point because field catalog is already
* built. Read field names from the field catalog or use
* COMPONENT <number> in a DO loop to access the fields. A
* simpler hard coded approach is used here.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'ABC'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'XYZ'.
APPEND <wa_dyn_table> TO <t_dyn_table>.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'TUV'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'DEF'.
APPEND <wa_dyn_table> TO <t_dyn_table>.
* Color cells based on your criteria. In this example, a test on
* FIELD2 is used to decide on color.
LOOP AT <t_dyn_table> INTO <wa_dyn_table>.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
* Get access to internal table used to color cells.
ASSIGN COMPONENT 'T_CELLCOLORS'
OF STRUCTURE <wa_dyn_table> TO <t_cellcolors>.
CLEAR wa_cellcolors.
wa_cellcolors-fname = 'FIELD2'.
IF <w_field> = 'DEF'.
wa_cellcolors-color-col = '7'.
ELSE.
wa_cellcolors-color-col = '5'.
ENDIF.
APPEND wa_cellcolors TO <t_cellcolors>.
MODIFY <t_dyn_table> FROM <wa_dyn_table>.
ENDLOOP.
* Display screen. Define screen 100 as empty, with next screen
* set to 0 and flow logic of:
* PROCESS BEFORE OUTPUT.
* MODULE initialization.
* PROCESS AFTER INPUT.
CALL SCREEN 100.
* MODULE initialization OUTPUT
MODULE initialization OUTPUT.
* Set up for ALV display.
IF r_dock_ctnr IS INITIAL.
CREATE OBJECT r_dock_ctnr
EXPORTING
side = cl_gui_docking_container=>dock_at_left
ratio = '90'.
CREATE OBJECT r_alv_grid
EXPORTING i_parent = r_dock_ctnr.
* Set ALV controls for cell coloring table.
wa_is_layout-ctab_fname = 'T_CELLCOLORS'.
* Display.
CALL METHOD r_alv_grid->set_table_for_first_display
EXPORTING
is_layout = wa_is_layout
CHANGING
it_outtab = <t_dyn_table>
it_fieldcatalog = t_fieldcat2.
ELSE. "grid already prepared
* Refresh display.
CALL METHOD r_alv_grid->refresh_table_display
EXPORTING
i_soft_refresh = ' '
EXCEPTIONS
finished = 1
OTHERS = 2.
ENDIF.
ENDMODULE. " initialization OUTPUT
Regards
vijay

To make different colours for the columns of ALV report in Grid display.

Hai Friends,
 I have created an ALV report in grid display method by using the call function reuse_alv_grid_display.
I have obtained the report.In that report i want to change the colour of each column.Plz provide the answer with a sample program.
 Thank u.

hi i had a program for the rows with diff colors....do the same thing for the columns..
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) type c, "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
 wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
 gd_tab_group type slis_t_sp_group_alv,
 gd_layout type slis_layout_alv,
 gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
 Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
 Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname = 'LINE_COLOR'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
 Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = gd_repid
 is_layout = gd_layout
 it_fieldcat = fieldcatalog[]
 i_save = 'X'
 tables
 t_outtab = it_ekko
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
 Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
data: ld_color(1) type c.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
*Populate field with color attributes
loop at it_ekko into wa_ekko.
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
if ld_color = 8.
 ld_color = 1.
endif.
concatenate 'C' ld_color '10' into wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
modify it_ekko from wa_ekko.
endloop.
endform. " DATA_RETRIEVAL
regards,
venkat

Fix columns in alv report

hi!
i wrote an alv report. i want the first 3 columns of the report to be fixed, and let the option of scrolling to the left or to the right to the rest of the columns.
thanks
yifat

hi Yifat,
Try The KEY option in your field catalogue..
If this field is set, the ALV Grid Control color-codes the column as a key field and fixes this column during horizontal scrolling
regards
satesh

Coloring an alv report lines

hi
i am creating my alv report using method cl_salv_table =>factory.
i want to color the report lines in red
how can i do that??
i only found how to color a column
thanks

Hi,
Check the below code:
TYPE-POOLS: icon, col.
type for internal table
TYPES: BEGIN OF t_marc.
        INCLUDE STRUCTURE marc.
internal table for cell color information
TYPES : it_colors TYPE lvc_t_scol,
END OF t_marc.
DATA: it_marc TYPE TABLE OF t_marc.
DATA: wa_marc LIKE LINE OF it_marc.
DATA: wa_colors LIKE LINE OF wa_marc-it_colors.
DATA: gr_alv TYPE REF TO cl_salv_table.
DATA: lr_columns TYPE REF TO cl_salv_columns_table.
SELECT-OPTIONS: s_mat FOR wa_marc-matnr MEMORY ID car.
START-OF-SELECTION.
retrieve data into internal table
SELECT * FROM marc
    INTO CORRESPONDING FIELDS OF TABLE it_marc
WHERE matnr IN s_mat.
LOOP AT it_marc INTO wa_marc.
    IF wa_marc-werks = '1000'.
      CLEAR wa_colors.
      wa_colors-fname = 'WERKS'.
      wa_colors-color-col = col_negative.
      wa_colors-color-int = 1.
      APPEND wa_colors TO wa_marc-it_colors.
    ENDIF.
    MODIFY it_marc FROM wa_marc TRANSPORTING it_colors.
ENDLOOP.
CALL METHOD cl_salv_table=>factory
EXPORTING
list_display = if_salv_c_bool_sap=>false
IMPORTING
r_salv_table = gr_alv
CHANGING
t_table = it_marc.
lr_columns = gr_alv->get_columns( ).
lr_columns->set_color_column( value = 'IT_COLORS' ).
display ALV
gr_alv->display( ).
(OR)
check this link
http://www.sapfans.com/forums/viewtopic.php?t=52107
Regards,
Shalini
Edited by: shalini reddy on Mar 10, 2009 4:13 PM

ALV Report coloring columns

Similar Messages

Maybe you are looking for