ALV report on BKPF and BSID

hi gurujis,
with your kind help i am learning something, but there is problem in each step. Now i am working with FI , i have came to know about two tables,
they are BKPF and BSID i have to join them and also produce output on the basis of 4 inputs like company no, coustomer no, currency and posting date. I need your help on this, can somebody send me the code to do this.
Also i would like to know is there any FM's to join two or more tables, if yes, please send me the name of that module with an complete example.
I need this , it is very urgent.
Thanks,
KHAN.

hi Khan,
SELECT bkpf~...
             bsid~...
INTO TABLE ...
FROM bkpf AS bkpf
INNER JOIN bsid AS bsid
ON bkpf~bukrs EQ bsid~bukrs
AND bkpf~gjahr EQ bsid~gjahr
AND bkpf~belnr EQ bsid~belnr
WHERE bkpf~bukrs EQ p_bukrs
      AND bsid~kunnr IN s_kunnr
      AND bkpf~waers EQ p_waers
      AND bkpf~budat EQ p_budat.
hope this helps
ec

Similar Messages

Running the alv report in background and sending it thro email

hi,
      i have to run the alv report in background and send the output through email

Hi
Many a times there is a requirement to display ALV Grid (not ALV List) in the background Job. I have checked the SDN Forum for the same and it has been mentioned that ALV Grid cannot be displayed in Background, but the list output of ALV is possible. So user wont have the actual Grid interface but the List interface.
There is a workaround to display ALV Grid in Background Job. The only restriction is you cant schedule the job through SM36. You need to execute the transaction of the report program, fill in the selection screen data and hit Execute.
The job would be executed in background. User will be able to see the Job Log and Job Status after executing the program. User doesnt have to go to SM37 to view the job status/log. Once the Job Status is changed to COMPLETED, user can click on DISPLAY SPOOL to view the ALV Grid.
Limitations:
Cant schedulea background job
The session should be active until the background job is completed. If the session is closed, then user wont be able to check the output in ALV Grid. User would be able to check the output through spool or SM37
Advantages:
If the spool width is greater than 255 characters, then the entire width could be seen in the output because the output is directed to an ALV Grid and not to spool
Interface of ALV Grid is available instead of ALV List even though its a background job.
Program wont give the TIME OUT error
Steps Required:
1. Once you execute the program, the following screen would be displayed
2. Click Display Job Status to check the Status of the Background Job
3. Click on Display the Job Log to check the Log
4. Click on Display Job Status to check the Job Status
5. Click on DISPLAY SPOOL to check the spool content once the Job Status is changed to COMPLETED. Output is displayed in ALV Grid
Programs:
1. Two different programs needs to be created
ZPROGRAM_ONE: This is the 1st program, where the selection screen and all the data validations would be done. Error handling for invalid data should be done in this program.
Once the data validation is done, this program would call the 2nd program ZPROGEAM_TWO. Build the logic to display ALV Grid in this program. The logic will only display ALV in foreground and it wont be reflected in the spool.
ZPROGRAM_TWO: This program would fetch all the data and do all the processing. If you want the spool output along with ALV Grid output, then build the logic in this program to display ALV Grid.
*& Report ZPROGRAM_ONE                                                *
REPORT zprogram_one                            .
PRASHANT PATIL
TABLES : mara,
         tsp01.
type-pools:slis.
TYPES : BEGIN OF t_mara,
          matnr   TYPE mara-matnr,
          ersda   TYPE mara-ersda,
          ernam   TYPE mara-ernam,
          laeda   TYPE mara-laeda,
        END OF t_mara.
DATA : i_mara       TYPE STANDARD TABLE OF t_mara,
       wa_mara      TYPE t_mara,
       wa_index     TYPE indx,        " For Index details
       wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
       i_jobsteplist     TYPE STANDARD TABLE OF tbtcstep, " For spool number
       wa_params         TYPE pri_params, " To Get Print Parameters
       wa_jobhead        TYPE tbtcjob,     " To know the status of job
       wa_jobsteplist    TYPE tbtcstep,    " To know the spool
       w_jobname         TYPE tbtco-jobname, " Job name for bckgrnd job
       w_jobcount        TYPE tbtco-jobcount, " Unique id for bckgrd job
       w_path            TYPE string,         " Upload path
       w_lsind           TYPE sy-lsind,       " Index
       wa_seltab         TYPE rsparams,
       i_seltab          TYPE STANDARD TABLE OF rsparams,
       wa_index1         TYPE indx,        " For Index details
       wa_index_key1     TYPE indx-srtfd VALUE 'PRG_TWO',
       i_fieldcat        TYPE slis_t_fieldcat_alv,
       wa_fieldcat       LIKE LINE OF i_fieldcat.
        CONSTANTS DECLARATION                                        *
CONSTANTS :
         c_a(1) TYPE c VALUE 'A',
         c_m(1) TYPE c VALUE 'M',
         c_l(1) TYPE c VALUE 'L',
         c_c(1) TYPE c VALUE 'C',
         c_zfdr(4) TYPE c VALUE 'ZFDR',
         c_x(1)    TYPE c VALUE 'X',
         c_locl(4) TYPE c VALUE 'LOCL', " Destination is LOCAL
         c_f(1)    TYPE c VALUE 'F',   " Job Status - Failed
         c_s(1)    TYPE c VALUE 'S',
         c_p(1)    TYPE c VALUE 'P'.
SELECTION SCREEN PARAMETERS
SELECT-OPTIONS : s_matnr FOR mara-matnr.
START-OF-SELECTION.
Before the export, fill the data fields before CLUSTR
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
EXPORT s_matnr
       TO DATABASE indx(st) FROM wa_index ID wa_index_key.
To Open the Job for background processing
PERFORM open_job.
To get the print parameters
PERFORM get_print_parameters.
Submit the job in background
PERFORM job_submit.
Close the background job
PERFORM job_close.
This is the output screen with the buttons ********
Create 3 buttons DISPLAY SPOOL, STATUS, JOBLOG
SET PF-STATUS 'ZS001'.
WRITE: / 'The program is submitted in Background'.
WRITE: / 'Press DISPLAY SPOOL to see the spool'.
WRITE: / 'Press STATUS to see the status of the background'.
AT USER-COMMAND.
If user presses the 'BACK' button
IF sy-ucomm = 'BAK'.
    IF wa_jobhead-status = c_f OR
        wa_jobhead-status = c_a.
      LEAVE TO SCREEN 0.
    ENDIF.
ENDIF.
If the user presses the 'DISPLAY SPOOL' Button
IF sy-ucomm = 'DISPLAY'.
    PERFORM display_spool.
ENDIF.
If the user presses the 'JOB STATUS' Button
IF sy-ucomm = 'STATUS'.
    PERFORM display_status.
ENDIF.
If the user presses the 'JOB LOG' Button
IF sy-ucomm = 'JOBLOG'.
    PERFORM display_job_log.
ENDIF.
*&      Form open_job
      text
--> p1        text
<-- p2        text
FORM open_job .
This is to Create a new job which is to be submitted in background to
process sales order/delivery/invoice
Here we would get a unique id ( Jobcount ) which identifies our job
along with the job name which we have assigned to our job
CONCATENATE sy-uname
              sy-datum
              sy-uzeit
                      INTO w_jobname . " Assign unique jobname
CALL FUNCTION 'JOB_OPEN'
   EXPORTING
DELANFREP              = ' '
JOBGROUP               = ' '
    jobname                = w_jobname
SDLSTRTDT              = NO_DATE
SDLSTRTTM              = NO_TIME
JOBCLASS               =
IMPORTING
   jobcount                = w_jobcount
CHANGING
RET                    =
EXCEPTIONS
   cant_create_job        = 1
   invalid_job_data       = 2
   jobname_missing        = 3
   OTHERS                 = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " open_job
*&      Form get_print_parameters
      text
--> p1        text
<-- p2        text
FORM get_print_parameters .
DATA : l_valid TYPE c.
This is to get the Print Parameters for the job which is to be
submitted in background to process sales order/delivery/invoice
CALL FUNCTION 'GET_PRINT_PARAMETERS'
   EXPORTING
ARCHIVE_ID                   = C_CHAR_UNKNOWN
ARCHIVE_INFO                 = C_CHAR_UNKNOWN
ARCHIVE_MODE                 = C_CHAR_UNKNOWN
ARCHIVE_TEXT                 = C_CHAR_UNKNOWN
AR_OBJECT                    = C_CHAR_UNKNOWN
ARCHIVE_REPORT               = C_CHAR_UNKNOWN
AUTHORITY                    = C_CHAR_UNKNOWN
COPIES                       = C_NUM3_UNKNOWN
COVER_PAGE                   = C_CHAR_UNKNOWN
DATA_SET                     = C_CHAR_UNKNOWN
DEPARTMENT                   = C_CHAR_UNKNOWN
      destination                  = c_locl " LOCL
EXPIRATION                   = C_NUM1_UNKNOWN
      immediately                  = space
IN_ARCHIVE_PARAMETERS        = ' '
IN_PARAMETERS                = ' '
LAYOUT                       = C_CHAR_UNKNOWN
LINE_COUNT                   = C_INT_UNKNOWN
LINE_SIZE                    = C_INT_UNKNOWN
LIST_NAME                    = C_CHAR_UNKNOWN
LIST_TEXT                    = C_CHAR_UNKNOWN
MODE                         = ' '
      new_list_id                  = c_x
PROTECT_LIST                 = C_CHAR_UNKNOWN
      no_dialog                    = c_x
RECEIVER                     = C_CHAR_UNKNOWN
RELEASE                      = C_CHAR_UNKNOWN
REPORT                       = C_CHAR_UNKNOWN
SAP_COVER_PAGE               = C_CHAR_UNKNOWN
HOST_COVER_PAGE              = C_CHAR_UNKNOWN
PRIORITY                     = C_NUM1_UNKNOWN
SAP_OBJECT                   = C_CHAR_UNKNOWN
TYPE                         = C_CHAR_UNKNOWN
      user                         = sy-uname
USE_OLD_LAYOUT               = ' '
UC_DISPLAY_MODE              = C_CHAR_UNKNOWN
DRAFT                        = C_CHAR_UNKNOWN
ABAP_LIST                    = ' '
USE_ARCHIVENAME_DEF          = ' '
DEFAULT_SPOOL_SIZE           = C_CHAR_UNKNOWN
PO_FAX_STORE                 = ' '
NO_FRAMES                    = C_CHAR_UNKNOWN
   IMPORTING
OUT_ARCHIVE_PARAMETERS       =
      out_parameters               = wa_params
   valid                        = l_valid
   EXCEPTIONS
     archive_info_not_found       = 1
     invalid_print_params         = 2
     invalid_archive_params       = 3
     OTHERS                       = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_print_parameters
*&      Form job_submit
      text
--> p1        text
<-- p2        text
FORM job_submit .
The job which we have created & the unique id ( jobcount ) which we
have got identifies our job. Hence those parameters are passed along
with the name of the background program "ZPROGRAM_TWO"
The job is submitted in background.
CALL FUNCTION 'JOB_SUBMIT'
    EXPORTING
ARCPARAMS                         =
    authcknam                         = sy-uname
COMMANDNAME                       = ' '
OPERATINGSYSTEM                   = ' '
EXTPGM_NAME                       = ' '
EXTPGM_PARAM                      = ' '
EXTPGM_SET_TRACE_ON               = ' '
EXTPGM_STDERR_IN_JOBLOG           = 'X'
EXTPGM_STDOUT_IN_JOBLOG           = 'X'
EXTPGM_SYSTEM                     = ' '
EXTPGM_RFCDEST                    = ' '
EXTPGM_WAIT_FOR_TERMINATION       = 'X'
    jobcount                          = w_jobcount
    jobname                           = w_jobname
LANGUAGE                          = SY-LANGU
    priparams                         = wa_params
    report                            = 'ZPROGRAM_TWO'
VARIANT                           = ' '
IMPORTING
STEP_NUMBER                       =
   EXCEPTIONS
     bad_priparams                     = 1
     bad_xpgflags                      = 2
     invalid_jobdata                   = 3
     jobname_missing                   = 4
     job_notex                         = 5
     job_submit_failed                 = 6
     lock_failed                       = 7
     program_missing                   = 8
     prog_abap_and_extpg_set           = 9
     OTHERS                            = 10
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " job_submit
*&      Form job_close
      text
--> p1        text
<-- p2        text
FORM job_close .
Once the job is submitted in background then the job is closed
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
AT_OPMODE                         = ' '
AT_OPMODE_PERIODIC                = ' '
CALENDAR_ID                       = ' '
EVENT_ID                          = ' '
EVENT_PARAM                       = ' '
EVENT_PERIODIC                    = ' '
    jobcount                          = w_jobcount
    jobname                           = w_jobname
LASTSTRTDT                        = NO_DATE
LASTSTRTTM                        = NO_TIME
PRDDAYS                           = 0
PRDHOURS                          = 0
PRDMINS                           = 0
PRDMONTHS                         = 0
PRDWEEKS                          = 0
PREDJOB_CHECKSTAT                 = ' '
PRED_JOBCOUNT                     = ' '
PRED_JOBNAME                      = ' '
SDLSTRTDT                         = NO_DATE
SDLSTRTTM                         = NO_TIME
STARTDATE_RESTRICTION             = BTC_PROCESS_ALWAYS
    strtimmed                         = c_x
TARGETSYSTEM                      = ' '
START_ON_WORKDAY_NOT_BEFORE       = SY-DATUM
START_ON_WORKDAY_NR               = 0
WORKDAY_COUNT_DIRECTION           = 0
RECIPIENT_OBJ                     =
TARGETSERVER                      = ' '
DONT_RELEASE                      = ' '
TARGETGROUP                       = ' '
DIRECT_START                      =
IMPORTING
JOB_WAS_RELEASED                  =
CHANGING
RET                               =
   EXCEPTIONS
     cant_start_immediate              = 1
     invalid_startdate                 = 2
     jobname_missing                   = 3
     job_close_failed                  = 4
     job_nosteps                       = 5
     job_notex                         = 6
     lock_failed                       = 7
     invalid_target                    = 8
     OTHERS                            = 9
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " job_close
*&      Form display_spool
      text
--> p1        text
<-- p2        text
FORM display_spool .
To Read the Job to get the spool details
DATA : l_rqident TYPE tsp01-rqident, " Spool Number
         l_spoolno TYPE tsp01_sp0r-rqid_char.
CLEAR : l_rqident,
          w_lsind,
          wa_jobsteplist.
REFRESH : i_jobsteplist.
SET PF-STATUS 'ZAR02'.
Get the Spool Number
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Read the Job Step list to get the spool number
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
Spool Number
l_rqident = wa_jobsteplist-listident.
MOVE l_rqident TO l_spoolno.
Check the spool in TSP01
SELECT SINGLE * FROM tsp01 WHERE rqident = l_rqident.
IF sy-subrc = 0.
    LEAVE TO LIST-PROCESSING.
    CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
      EXPORTING
        spoolid       = l_spoolno
    IMPORTING
      RC            =
      STATUS        =
    PERFORM show_alv.
ENDIF.
w_lsind = sy-lsind.
IF sy-lsind GE 19.
    sy-lsind = 1.
ENDIF.
ENDFORM.                    " display_spool
*&      Form show_alv
      text
--> p1        text
<-- p2        text
FORM show_alv .
Before the import, fill the data fields before CLUSTR.
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT i_mara
FROM DATABASE indx(st) ID wa_index_key1 TO wa_index1.
FREE MEMORY ID wa_index_key1.
This prepares the field-catalog for ALV.
PERFORM prepare_fieldcatalog.
This displays the output in ALV format .
PERFORM display_alv.
ENDFORM.                    " show_alv
*&      Form display_status
      text
--> p1        text
<-- p2        text
FORM display_status .
To Display the STATUS of the JOB which is exectued in background
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
To Display the status text as per the status type
CASE wa_jobhead-status.
    WHEN 'S'. WRITE: / 'Scheduled'.
    WHEN 'R'. WRITE: / 'Released'.
    WHEN 'F'. WRITE: / 'Completed'.
    WHEN 'A'. WRITE: / 'Cancelled'.
    WHEN OTHERS.
ENDCASE.
IF sy-lsind GE 19.
    sy-lsind = 1.
ENDIF.
ENDFORM.                    " display_status
*&      Form display_job_log
      text
--> p1        text
<-- p2        text
FORM display_job_log .
To display the log of the background program
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'BP_JOBLOG_SHOW_SM37B'
    EXPORTING
      client                    = sy-mandt
      jobcount                  = w_jobcount
      joblogid                  = ' '
      jobname                   = w_jobname
    EXCEPTIONS
      error_reading_jobdata     = 1
      error_reading_joblog_data = 2
      jobcount_missing          = 3
      joblog_does_not_exist     = 4
      joblog_is_empty           = 5
      joblog_show_canceled      = 6
      jobname_missing           = 7
      job_does_not_exist        = 8
      no_joblog_there_yet       = 9
      no_show_privilege_given   = 10
      OTHERS                    = 11.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " display_job_log
*&      Form prepare_fieldcatalog
      text
--> p1        text
<-- p2        text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'MATNR'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen    = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERSDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERNAM'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'LAEDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM.                    " prepare_fieldcatalog
*&      Form display_alv
      text
--> p1        text
<-- p2        text
FORM display_alv .
Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      it_fieldcat = i_fieldcat
    tables
      t_outtab     = i_mara.
ENDFORM.                    " display_alv
     ZPROGRAM_TWO: This is the 2nd program which would be called from program ZPROGRAM_ONE.
*& Report ZPROGRAM_TWO                                                *
REPORT zprogram_two                            .
PRASHANT PATIL
TABLES : mara.
TYPE-POOLS:slis.
TYPES : BEGIN OF t_mara,
          matnr   TYPE mara-matnr,
          ersda   TYPE mara-ersda,
          ernam   TYPE mara-ernam,
          laeda   TYPE mara-laeda,
        END OF t_mara.
DATA : i_mara        TYPE STANDARD TABLE OF t_mara,
       wa_mara       TYPE t_mara,
       wa_index      TYPE indx,        " For Index details
       wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
       wa_index1     TYPE indx,        " For Index details
       wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
       i_fieldcat        TYPE slis_t_fieldcat_alv,
       wa_fieldcat       LIKE LINE OF i_fieldcat.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
Before the import, fill the data fields before CLUSTR.
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT s_matnr
FROM DATABASE indx(st) ID wa_index_key TO wa_index.
FREE MEMORY ID wa_index_key.
SELECT matnr
       ersda
       ernam
       laeda
       FROM mara
       INTO TABLE i_mara
       WHERE matnr IN s_matnr.
PERFORM prepare_fieldcatalog.
PERFORM display_alv.
Before the export, fill the data fields before CLUSTR
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
EXPORT i_mara
TO DATABASE indx(st) FROM wa_index1 ID wa_index_key1.
*&      Form prepare_fieldcatalog
      text
--> p1        text
<-- p2        text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'MATNR'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERSDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERNAM'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'LAEDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM.                    " prepare_fieldcatalog
*&      Form display_alv
      text
--> p1        text
<-- p2        text
FORM display_alv .
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = i_fieldcat
    TABLES
      t_outtab    = i_mara.
ENDFORM.                    " display_alv
its possible to display ALV Grid using OO ALV. Following code can be used instead of FM.
In the PBO, add following code
SET PF-STATUS 'ZSTAT'.
If program is executed in background
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING
e_offline = off.
IF off IS INITIAL.
IF container1 IS INITIAL.
CREATE OBJECT container1
EXPORTING
container_name = 'CC_ALV1' .
ENDIF.
ENDIF.
CREATE OBJECT g_grid1
EXPORTING
i_parent = container1.
CALL METHOD g_grid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
i_save = 'A'
i_default = ' '
is_layout =
is_print =
IT_SPECIAL_GROUPS =
it_toolbar_excluding =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = i_output
it_fieldcatalog = i_fieldcatalog
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Reward points if useful
Regards
Anji

Inner join on bkpf and bsid

Hi Experts ,
I want to do an inner join on bsid and bkpf tables in the select query . I want to order the result on the basis of cputm field in bkpf , that is why inner join on bkpf is req , rest all the fields are from bsid . But the requirement is that we should not select the cputm field in the select , it is only to be used for sorting the result of the select query . we are also using select * from bsid where ...... endselect . and not specific fields from bsid currently . Kindly let me know how to use the inner join on bkpf and bsid in this case .
Would reward all helpful answers .
Thanks

Hi Ankit,
First make a structure of the required fields.
TABLES : bkpf,bsid.
TYPES : BEGIN OF x_tab,
          belnr like bkpf-belnr,
          kunnr like bsid-kunnr,
          bldat like bsid-bldat,
          budat like bsid-budat,
          waers like bsid-waers,
      END OF x_tab.
DATA : itab type STANDARD TABLE OF x_tab,
        wa_itab TYPE x_tab.
start-of-SELECTION.
SELECT bkpfbelnr bsidkunnr bsidbldat bsidbudat bsid~waers into table itab
   FROM bkpf INNER JOIN bsid on bkpfbelnr = bsidbelnr and
                                bkpfbukrs = bsidbukrs and
                                bkpfgjahr = bsidgjahr.
Rewards Points, if useful.
Regards
Manoj Kumar
Edited by: Manoj Kumar on Dec 26, 2007 2:36 PM

ALV report display online and generate in spool

Dear expert,
I have created an ALV report. I want to run this report online. After executed, the report is displayed. After display this report, I also want to generate the output report in the spool. Is there any way to do this? Thank you.
I have tried to use submit...to SAP Spool. in this way, it will generate the spool, but it will not display the report online. I want it both display online and generate a spool.

well forget yout the new-page print on thingie, since you use ALV.
if you had a write list this trick would be cool since you just could do following:
Do 2 times.
if sy-index GT 1.
    new page print on.
endif.
loop at itab into wa.
    write stuff....
endloop.
if sy-index GT 1.
    new page print off.
endif.
enddo.
/edit arrrgh forgot to write further...
with your ALV you could process a write list as well after displaying but you will have layout differences between your display and your spool then and i dont think that this is what you want/need.
you could however after display process your programm a second time, in background task and give it a printer where to print to. Since ALV wont get executed in background task you will get a spool instead.
Edited by: Florian Kemmer on Sep 15, 2010 2:40 PM

Running a ALV Report in bakcground and sending it to Email/FAX

Hi,
I am designing a ALV report to send a email/fax/Printer which has to be run in background or foreground according to selection screen inputs.
I am doing the following
1. After generating ALV report, converting it to pdf
2. Sending Email or Fax or Print from selection screen value.
3. after that scheduling in background using JOB_OPEN and JOB_SUBMIT FM's.
Can I use SO_DOCUMENT_SEND_API1 FM for both Email and Fax.
When I schedule the report in the background using JOB_OPEN, at which point I have to code it inside the report. Is it after I generate the ALV Report and Email sending code or before it..
Thanks

Hi
How did you end up doing the emailing? I have the same task.....

Downloading ALV report in excel and csv format

1.I have generated a report in ALV.
Now, I want a button 'generate' on my alv tooldbar.
How to do that?
2.Now clicking on that generate button will show a popup window containing the title 'Save list in file..'
And the window will contain two radio buttons to download the report in either in excel or in csv file format.
i. Spreadsheet(.xls)
ii.Spreadsheet(.csv)
How to get the popup window containing two radio buttons and having the options for downloading the alv report in the above file formats.
Kindly guide.

@chandrasekhar:
Thanks for your response. I'll try with the export button but also willing to know how to create button on toolbar.And by clicking on that button a popup box will come having two radio buttons asking to download the report either in .xls or in .csv format. I am looking for the subroutines for that.
Thanks.
Message was edited by:
cinthia nazneen

Automatic Display of NEW Data in ALV Report using Classes and Methods

Hi,
I have developed a ALV Report for displaying data from a set of DB tables using ABAP OO, Classes and Methods. The requirement is to have the report output to be automatically updated with the new entries from the DB table at a regular frequency of tiem may be every two minutes.
Could anyone please tell me how can this be acheived.
Thanks and regards,
Raghavendra Goutham P.

Yes its possible.
Take a look at this thread
Auto refresh of ALV Grid, without user interaction
Or Rich's blog
/people/rich.heilman2/blog/2005/10/18/a-look-at-clguitimer-in-46c
Regards,
Ravi
Note : Please mark all the helpful answers

Convert ALV report into PDF and mail ( Hierarchical List View )

Hi All,
I see many posts of PDF download but none resolve my issue.
I am writing a report in APO SNP which fetches data and displays an alv using REUSE_ALV_HIERSEQ_LIST_DISPLAY as i need to show the result as a Hierarchical sequential list.
I need to provide the functionality of PDF download ( online ) and Email with PDF as attachement ( Background ) for the list output.
I read the post http://www.sapdev.co.uk/reporting/rep_spooltopdf2.htm which provides a sample program and tried to incorporate but the control doesn't come back from the ALV function module.
How do i trigger the spool creation while still showing the output and then send email?
Suggestions and pointers are highly appreciated
Regards,
KD

Hi.,
Check this wiki: [Convert ALV as PDF Attachment|http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
hope this helps u.,
Thanks & Regards,
Kiran

ALV report web (BSP and Web Dynpro)

Hi,
I want to display report results in a BSP table using a list viewer component.
I've found some classes for web dynpro that use ALV to print data results. Is there any way to use the same within a BSP application?
(Web Dynpro example that use an ALV table:
'WDR_TEST_DYN_ALV_USAGE'.)
Thanks and regards,
Maria

what ALV features you are looking for?
1. sorting - available in bsp tableview
2. filter - availalbe in bsp tableview
3. layout management (visible columns) - is doable with BSP (search weblog area for BSP personalize tableview)
4. export to excel - you can code that in BSP (code samples/special tag available in BSP weblog area)
but if you want a easy way out, as others mentioned, you can use integrated/standalone ITS to generate ALV and then use that its page as frame/iframe within you BSP
Raja

How to do the ALV report output in groups and caluculate the tOTALS(URGENT

Hi
In my ALV report output .I have to group the output based on the DAYS field
0-10 days in one group
10-30 days in one group
above 30 days one group
There is also a field by name "AMOUNT" in my output.
I have to calculate SUBTOTALs at the end of every group and at the end of the report i should caluculate GRAND TOTAL.
Please remember that i should not use any any BLOCKED ALVs and for Totals i should not use the SYMBOLS provided in the application toolbar of the report
Thanks in Advance

Please don't repost your questions...
Check out my answer in your other post.
How to make the ALV report in groups and caluculate the TOTALS
Regards,
Naimesh Patel

Download a ALV report without repetitive headers and footers.

Hi,
I have an ALV report with header and footer. When I download the report into excel, after every 30 (approx) records there is a header and a footer. But I do not need it.
I need header only once and footer only once in the excel sheet. Please let me know how to achieve it.
Thanks
Krishna

Hi Manish,
if sy-pagno EQ 1 or sy-batch = 'X'.
Call the top-of-page event code.
endif.
I don't think it can work as it calls the top-of-page at each page in batch mode. Better code should be something like :
if sy-pagno EQ 1.
Call the top-of-page event code.
endif.
Note : for a generic solution, I think the page number is not automatically page number 1 (for example, if we use a cover page or have printed something else before). So we'd should better use a global variable (first_time) set to 'X' just before CALL FUNCTION 'REUSE_ALV_LIST...' :
IF first_time = 'X'.
Call the top-of-page event code.
CLEAR first_time.
ENDIF.
To All,
I really made a big confusion in my previous answers, which were in fact about column headings (how to print them only once). Sorry about that.
Sandra

Print an ALV report in A3/A4

How to print the output of an ALV report in A3 and A4 size. The number of columns in the report are 49. Also the headings of the columns is too long, is there any way to word wrap these headings in to multiple lines?

You can customize printer with this formats but you can't establish more than one header in ALV

ALV report - fields do not print on same line

I am working on an ALV report now. And I was trying to download the report using the buttons.
When I download the file (Local File Button) and then try to view it, all the fields are not on the same line.
Say for example, if i have 75 fields, half appear on the first line and the other half appear on the second line.
But when I try to view the file in excel format using ctrlshiftF7, it looks perfectly fine (All the 75 fields lie on the same line).
And also when I right click on the report and save as .mhtml, it looks good (All the 75 fields lie on the same line).
How can this issue be fixed? Is it something to do with the code?
Please let me know, if anybody else had a similar issue and as to how it was resolved.
I would greatly appreciate your help. Thank You.

I am not very clear about your problem.
What i understood is that you are downloading the file (I beleive as unconverted) and than opening it in NOTEPAD and you are getting one record in 2 lines. If yes than try to uncheck the Format-> word wrap in the menu in Notepad.

ALV Report In Background.. Generating same out put using ABAP Extracts

Hi
We are running ALV reports and generating out put in background using Extracts. We are having a discussion that SAP doesnt recommend to execute ALV reports using batch and generate report output , as it heavily load for spool ... we are coming across some problem when I analyze Sm37 ... I found an error " ABAP framework unable to initialize " .
I want an input/suggestion what you guys think about it?
Thanks in Advanced...
Bye

Nope... Were using some batch id which use to run background job, as I am also in SAP Security, I just verify it has all the security to run the report . As this report is running fine if we ran it other then batch id ... as before it was running fine .
Thanks
Message was edited by: Saquib Khan

Background job to download standard ALV reports

Hi,
Could anyone knows how to download an standard ALV report in a background job?
In a job I made, some ALV reports were precessed and made, and their spools were made,
but not downloaded.
Regerds,
Katsumi Makabe

hi,
I think you can have a network shared folder on application server.
you said that it is a comma separated file.
1) Using TCODE CG3Z, upload the flat file to application server , remember to copy the path (it contains file path aswellas name).
2) Using DATASET read the filepath along with the name and read each line into workarea and split at ',' into fields.
3) Then append those fields to internal table.
using the FMs job_open, job_submit and job_close you can go for background scheduling.
Please go through the following link for sample code on FTP.
http://abap4.tripod.com/FTP_Using_SAP_Functions.html
Reward points if helpful.
Thanks and regards

ALV report on BKPF and BSID

Similar Messages

Maybe you are looking for