Always on : Is there any command or other way which tells who and when replica got failover or failback to other replica?

Is there any command or other way which tells who and when replica got failover or failback to other replica?
Rahul

By Monitoring of Availability Groups:
Monitoring of Availability Groups (SQL Server)

Similar Messages

Is there any command in Reports 6i - which is similar to raise form_trigger

Is there any command in Reports 6i - which is similar to raise form_trigger_failure in forms6i.

This might be helpful,
You must raise the exception from within your PL/SQL.
SRW.PROGRAM_ABORT examples
/* Suppose you want to put a border around the salary if it is greater
than 0.
** Suppose, also, that if the report fetches a salary less than 0, you
want to
** raise a customized error message (i.e., "FOUND A NEGATIVE SALARY. .
** then terminate the report execution. To do so, you could write the
** following format trigger for F_SAL.
FUNCTION foo return boolean is
BEGIN
if :sal >= 0 then
srw.attr.mask := SRW.BORDERWIDTH_ATTR;
srw.attr.borderwidth := 1;
srw.set_attr (0, srw.attr);
else
srw.message(100, 'FOUND A NEGATIVE SALARY.
CHECK THE EMP TABLE.');
raise srw.program_abort;
end if;
RETURN (TRUE);
END;

Is there any command in SQL or in form6i to view the role of current user?

Hi Friends,
Is there any command in SQL or in form6i to view the role of current user?
Please reply me on urgently basis.
Shahzad

select * from SYS.dba_role_privs where grantee=<USERNAME>
Ensure that you have select privs on above system view.
Cheers........ Bob

Is there any command/FM to get rid of error message in CATT?

Dear friends,
Is there any command/FM to get rid of error message in CATT? such as the following in eCATT script?
MESSAGE ( MSG_1 ).
ENDMESSAGE ( E_MSG_1 ).
or any body now how to get the socrce code of these commands?
Many thanks!
Cliff

Hi,
See the help
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2143b408e11d1896b0000e8322d00/frameset.htm
Regards
Kiran Sure

Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?

TimesTen Release 11.2.1.9.6 (64 bit Linux/x86_64)
Command> dssize;
PERM_ALLOCATED_SIZE:      51200000
PERM_IN_USE_SIZE: 45996153
PERM_IN_USE_HIGH_WATER:   50033464
TEMP_ALLOCATED_SIZE:      2457600
TEMP_IN_USE_SIZE:         19680
TEMP_IN_USE_HIGH_WATER:   26760
Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?
tried to use ttsize function, but it gives some senseless results – for example, for the biggest table, tokens, it produces following output (that this table is 90GB in size – what physically cannot be true):
Command> call ttsize('tokens',null,null);
< 90885669274.0000 >
1 row found.

Are you able to use the command line version of ttSize instead? This splits out how much space is being used by indexes (in the Temp section of the TT memory segment), which I think is being combined into one, whole figure in the procedure version of ttSize you're using. For example:
ttSize -tbl ia my_ttdb
Rows = 4
Total in-line row bytes = 17524
Total = 17524
Command> create index i1 on ia(a);
ttSize -tbl ia my_ttdb;
Rows = 4
Total in-line row bytes = 17524
Indexes:
Range index JSPALMER.I1 adds 5618 bytes
Total index bytes = 5618
Total = 23142
Command> call ttsize ('ia',,);
< 23142.0000000000 >
1 row found.
In 11.2.2 we added the procedure ttComputeTabSizes which populates system tables with detailed table size data, and was designed to be an alternative to ttSize. Unfortunately it still doesn't calculate index usage though, and it isn't in 11.2.1.

Is there any command to see dfc memory on SUP32?

Is there any command to see dfc memory on SUP32?

I don't know if the Sup32's support dfc's or not or if it's only the 720's . To see this on the 720's you would have to log into the individual DFC cards by using the "attach slot#" command and then do a show version , this shows how much memory is on the indivdual cards . There is also a lot of other things you can look at in there , they have their own individual logs etc.... There is a a whole "show" command set just for the dfc's .

Are there any command can list all container and XML doc which in DB

When I use BDB XML shell,
are there any command can list all container or xml document which in database,
maybe like command dir(in windows), can list all exist directory and file.
Thank very much.
Henry Wang

Hi Henry,
When I use BDB XML shell,
are there any command can list all container or xml
document which in database,
maybe like command dir(in windows), can list all
exist directory and file.If you type "help" in the dbxml shell you'll get a list of all the commands available. As you will observe, you can use the "getDocuments" command to retrieve all the documents within a container. You will have to open the container first.
If you want to list all the files within a directory you'll need to simply use the command prompt's "dir" (naming all your containers within a directory in the <container_name.dbxml> would allow you get the list by running a "dir *.dbxml" command).
Not sure that this is what you really want, but if you would like to keep track of all the containers within a directory, or other directories, you can use a container with a special role, that of a catalogue, to hold the list of all created containers on disk, and eventually other specific information.
Regards,
Andrei

Should I disconnect my iphone lightining connector when the battery is fully charged? or i can connected always?is there any issue using iphone powered in?

Should I disconnect my iphone lighting connector when the battery is fully charged? or i can connected always?is there any issue using iphone powered in?

It can stay connected fully charged without any problems.
No issue using the iPhone while charging.

Are there any specific files (other than swf) that are not supported in the content viewer?

Are there any specific files (other than swf) that are not supported in the content viewer?

Specifically -- Is there a limitation as to any content in a PDF that would keep it from displaying correctly other than swf?

Is there any bapi returns dynamic value of reorder point and safety stock

Hi all,
Is there any bapi returns the runtime value of ROP and SS by passing changenr/objectid taken from CDPOS.
if exists please send me with code.
Thanks
PRR R

hi,
As far as i know is static means manual entry of reorder point.
The dynamic or automatic reorder point is used for Forecast based planning...
the sysstem wii automatically calculate the reoder point evrytime there is the forecast run.
So, it dependig on ur scenario , select either manual or automatic.
First entry for both is always manual entry....
hope u got this..
Regards,
Smitha

HT201342 Are there any setting or some way to show notifications for new email without open Apple Mail app ?

Are there any setting or some way to show notifications for new email without open Apple Mail app ?
You know , I am an OCD . I alway's close my Mail app and miss many important new emails .

What I do is open the Mail.app, then click the red traffic light (upper left corner of the main Mail.app window) to close that window. The app itself will remain running and you will get updates - this helps keep the desktop tidy while while the mail app remains running. When an update is received, simply click the either the mail icon in your dock or go to the Mail.app menu and click Window > Message Viewer.

Any command line audio player with song rating and play count?

Is there any command line audio player that can handle song rating and play count? Thank you

I answer my question: mpd + mpdcron can store song rating and play count and much more to sqlite database.
Last edited by hariskar (2015-03-20 05:01:09)

Is there any difference between R/3 4.7 version and ECC 5.0????

Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
Andy

Andy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?

I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
Thanks

CME is part of the IOS, so you can't upgrade the IOS seperately from CME.
That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
Brandon

Always on : Is there any command or other way which tells who and when replica got failover or failback to other replica?

Similar Messages

Maybe you are looking for