Amend Risk and Issue fields

Hi
Wonder if anyone can help, we have just subscribed to Project online and I need to customise some of the screens to take into account our Risk and Issue requirements.
I have been looking around and I can edit a project Risk and Issue columns but not sure how I edit the default risks and issue tables so it can be applied to all projects?
Any help greatly appreciated.
Regards
S

Hi Sean,
To do this, you have to customize a new project site, save it as a template and associate it to an Enterprise Project Type. It will be applied to all new prject site.
Here is an excellent blog that gives the procedure:
http://www.prasannaadavi.com/2013/05/customizing-project-site-template-in.html
PS: I changed your discussion into a question.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Similar Messages

Project Risk and Issue link in PDP

Hi ,
I need to create issue item in a PDP with the New item form.
In my organization people don't want go another page for creating issues , risks and deliverable.
How to integrate with these item in a PDP or how to put direct link for create new item in a PDP.
Another PDP they need to show the created items also .
Is there any way to do this scenario?

Hi,
You will find below 2 blogs with the procedure for displaying risks and issues lists in a PDP.
http://nearbaseline.com/blog/2015/03/project-site-risk-list-in-a-pdp-webpart-2013-version/
https://pwmather.wordpress.com/2014/04/11/want-to-see-risks-and-issues-on-a-projectonline-projectserver-project-detail-page-ps2013-sharepointonline-sp2013-office365-javascript-jquery/
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

IDOC mapping issue (calculation using parent and child fields)

We are mapping an IDOC to a file for output to a third party. The IDOC has many segments, some of which are embedded. This is where I'm having the issue. I am trying to perform a calculation on a field from the parent node (E1EDP01-MENGE) with the field from the child node (E1EDP05-KRATE) to determine the total tax for that line (qty X rate).
Issue: The mapping that is in place is using the same MENGE value for all calculations, even where the E1EDP01 segment is not a parent of the E1EDP05 segment.
Please review the screen prints and explain how I can correctly group the E1EDP05 child segments rate field (KRATE) with the corresponding parent segment E1EDP01 quantity (MENGE).
Example:
Parent segment, E1EDP01 / Child segment E1EDP05 (There are many E1EDP05 segments for 1 E1EDP01 segment)
E1EDP01 (parent node)
E1EDP05 (child node)
Target structure
ITEM (parent) --->E1EDP01 is mapped at node level
-->ITEM_DATA --->E1EDP01 is mapped at node level
-->ITEM_TAX --->E1EDP01 is mapped at node level
 -->(fields for item_tax)
 -->Record type
 -->Invoice number
 -->Line total
 -->etc...
I am mapping (E1EDP01-MENGE) for calculation with (E1EDP05-KRATE) to determine tax at the line item level. I have the context set at each Node, E1EDP01 for MENGE and E1EDP05 for KRATE. I was using CopyValue, but this was using the frist occurence of MENGE for all line items.
mapping example
*I am using MENGE (Copy_Value) then multiplying by KRATE to get the line item total. This was causing the same MENGE (because of Copy_Value) for all line items.
E1EDP01-MENGE|Copy_Value|MULT--->TAX_ITEM-LINE_TOTAL
E1EDP05-KRATE|
I removed the CopyValue and now I'm getting the following error:
Cannot produce target element /ns0:MT_DTN_INVOICE1/INVOICE/ITEM/ITEM_TAX[3]/LINE_TOTAL. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
How can I map this so the child records (E1EDP05) are grouped with the correct parent records (E1EDP01)?
Thanks in advance!
Michael

Check this blog:
/people/claus.wallacher/blog/2006/04/17/replication-of-nodes-using-the-graphical-mapping-tool
Regards
Stefan

Issue in mapping the same source and target fields

Hi All,
I am working on PI 7.0 and currently I am connecting to PI 7.0 via citrix desktop . Problem here is : in the mapping , direct mapping option that is available to map the same source and target fields is disabled . I do know that this is due to some java version issue .
What I want to know is there any possibilty of solving this issue without installing an updated java version ?
Regards
Vinay P.

I've faced the same for many times and all of that were due to Java version.
1st of all, you have to check the authorizations you have. If you have enough (DEVELOPER_J2EE, CONTENT_ORGANIZER_J2EE, and so), and - obvious but very often forgotten - you have to assure you're trying to change it in the message mapping change mode On.
Then, last shot should be downgrade your Java version.
The 1.4.2 JRE version allow you to use not only the Mapp the Identical field but also Dependencies, Clear Mapping and some other tools/buttons. As mentioned above, if there's a fix in the new Java releases, I do not know (hope so) and would appreciate if you could let us know.
Tks.

MIRO issue (urgent!), amount and quantity fields are not captured from PO

Hi,
When we try to post thought MIRO using PO as reference, quantity and amount fields are not captured. We do MIGO first and then MIRO.
GR based invoice verification in the vendor master is selected and the check mark GR-based in the PO is selected too.
We're getting this MIRO issue for "all" PO and Service Entry Sheet.
We'll appreciate your recommendation in order to fix this critical issue as soon as possible.
Thanks in advance.

I was looking for copy controls and other functions. Glad this is now resolved. You need to award yourself points!
Cheers.

I need to know the name of the database table and the fields in that table

hi,
i need to I need to know the name of the database table and the fields in that table for the following fields of the front end .
1) incident details.
2) ownership details
3) injury type
4) % of investigation completed withen 7 days.
5) count of incident type
6) cost of workers compensation claim.
7) injury resulting from for workers compensation claim
8) investigation free text.
9) investigation contribution factors.
10) investigation root cause.
11) investigation root cause free text
12) employee risk assesment
13) protential infrigment notice issued
14) actual infrigment notice issued.
15) actual infrigment notice reference number.
16)vehicle damaged text.
18) when the incident occured.
thanks and regards,
pronoy .

Hello,
Check CCIHT* under se16 and search for relevant information
Thanks
Jayakumar

Infoset Join condition on Key feilds and data fields

Hi Guys,
I have a requirement to biuld the Info set with join conditon on two DSO's the info objects which i am using in the JOin condition are defined as data fieds in one DSO and defined as key fields in another DSO, is it possible to define join condition on key fields and data fields.
The two info objects are
                       0AC_DOC_NO
                       0ITEM_NUM
These two info objects are defined as data fields in DSO :   0LIV_DS1   Invocie verificaion
                                                        key fields in DSO:    0FIAP_0o3 FI AP Line Item
Please suggest me is it possible to define join the condtion on the data fields and key feilds.
Thanks
Best regards
SG

Hi
yes you can create join, you will get any issue in reporting level.
example: Say i want to create Info Set on 0MATERIAL and Sales DSO.
In 0MATERIAL Info Object it is key filed, but in my DSO 0MATERIAL is data field.Still we can create
Creation of join is dependent on fields common in your source objects.
check out the below document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Sep 27, 2011 2:26 AM

Defining Key -field and data fields

Hi all
i have to define Key-Fields and data-Fields for a DSO(say DSO3).
DSO1 is a combination of DSO2 and DSO3..
DSO1 and DSO2 are SAP defined DSOs.
DSO3 is a User defined DSO.
my assumption:
   DSO3 has 30 fields
   DSO2 has 16 fields.
   can i create the DSO3 with remaining 14 fields which is there in DSO1?
   or i have to create the DSO3 with 30 fields(all DSO1 fields).
can any body explain....
Thanks & Regards
krishna

The problem is not how many fields you create where, the issue is where is the data is going to come from.
Since you data is going from DSO3 to DSO1and if the field is already getting populated in DSO1 from DSO2, then you don't have to worry about populating those fields again, unless and otherwise you want to overwrite them.
Remember any fields exist in both DSO3 and DSO2 which overlapping will be overwritten by the latest update.
Again, going back to your question, you should consider does your datasource has missing fields (14 of them).
thanks.
Wond

How to update a People and group field using a sandbox solution

Hi,
I am creating a sandbox solution for office 365 and creating a custom form using visual web part, which will allow users to enter data in a custom list.
And that list also have a user field. I am able to get SharePoint user field on the form (using javascript) which is searching for the user and get a value (working fine).
Issue: But I am not able to save the user value. Because to save user value I require web, UserID and login name, to construct SPFieldUserValue object or string in "111;#TestUser" format. Moreover that user should be present in
SiteUserInfoList.
I tried web.EnsureUser() but did not work under sanbox solution.
Can you please provide any pointer or workaround to the problem? I may be missing something here.
Thanks,
Himanshu

Hi,
According to your description, my understanding is that you want to update the people and group field in Sandbox solution.
In the sandbox solution, you can still use the web.EnsureUser() function to get the user information, see the thread below:
EnsureUser in sandboxed solution
In additional, there is a demo with your similiar requirement for your reference:
Using the People Picker Control in Sandbox Solutions / Office 365
Thanks
Best Regards,
Jerry Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

File Path and Name field does not display correct path

We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field inside our report and it displays the correct path when viewed inside Crystal reports:
C:\Program Files\reports\Chart.rpt
When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
How can this be corrected?
Thanks in advance for any assistance.

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

Interactive report with checkbox and editable field

Hi,
For a project I'm working on I need to create a interactive report in Apex 3.2 with the ability to select lines and to modify one of the columns in the report.
To do this, I started off by adding these two fields to the selection query of my IR:
apex_item.checkbox(1, product_number) cb
and
apex_item.text (2,QTY_TO_ORDER) QTY_TO_ORDER
cb is the checkbox files, and QTY_TO_ORDER is the editable field.
That worked like a charm and I got my two fields in the report.
To process the values, I added this page process, wich for now should only store the "product number" and "QTY_TO_ORDER" fields in a table.
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
insert into mytmptable values (APEX_APPLICATION.G_F01(i),APEX_APPLICATION.G_F02(i));
END LOOP;
commit;
end;
However, this doesn’t work the way I want it to work. When I check the checkboxes of two rows, it will store two rows with the right product numbers, but it will take the top two QTY_TO_ORDER field of the table regardless of which ones are checked. I was able to solve this problem, by adding a rownum to the query and using the rownum as the value for the checkbox. Since I still need the product_number and qty_to order fields I made them both text fields.
I changed my page process to:
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
insert into mytmptable values (APEX_APPLICATION.G_F02(APEX_APPLICATION.G_F01(i)),
APEX_APPLICATION.G_F03(APEX_APPLICATION.G_F01(i)));
END LOOP;
commit;
end;
This seemed to solve the problem, and I now got the right values in the table, unless I used sorting in the report... As soon as I sorted the report in a way different than by rownum, I got the wrong values in the table. The reason for this is of course that my insert just selects the nTh row from the table, and my rownums aren't dynamic.
I've found a lot of examples on the internet using '#ROWNUM#' in the selection, which should dynamically generate a rownum in the report. This seems to work in normal report, but in a interactive reports, the literal values '#ROWNUM#' shows up.
Is there any way to solve this issue?

Hi,
Try with 3 fields:
apex_item.checkbox(1, product_number) cb,
apex_item.text (2,QTY_TO_ORDER) QTY_TO_ORDER,
apex_item.hidden(3, product_number) prod_no
The hidden field should be display as a hidden column.
Then your process can be:
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
FOR j in 1..APEX_APPLICATION.G_F03.count LOOP
IF APEX_APPLICATION.G_F01(i) = APEX_APPLICATION.G_F03(j)) THEN
insert into mytmptable values (APEX_APPLICATION.G_F01(i),APEX_APPLICATION.G_F02(j));
exit;
END IF;
END LOOP;
END LOOP;

System and Query field disable in Data Manager for Netweaver BI

Dear All.
i have installed Xcelsius Engage Server 2008, when i try to add connection for SAP Netweaver BI from the Data Manager the dialog appears correctly but in Defination TAB only the Name field is enable both System and Query field is disable.
without that how can i configure the connection please let me know how to fix this issue.
Kind regards,

Hi,
You give the name of the connection and then click on "Browse". It will then prompt you to connect to the desired system. Log in and then select the appropriate query you want to build a dashboard on.
Hope this helps.
Regards,
RashmiG

Runtime error in Dynamic internal table with AMOUNT and Quantity Fields..

Dear friends,
I am attempting write a dymanic Select Statement (with joins).
And the sleect query looks like this..
SELECT (LT_SEL_LIST)
INTO CORRESPONDING FIELDS OF
TABLE <DYN_TABLE>
FROM (LT_FROM_LIST)
WHERE (LT_WHERE3).
Here the into table is a dynamically created internal table..
which is created by ...this
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = IT_OUTPUT2[]
 IMPORTING
 EP_TABLE = DY_TABLE.
the it_output2 contains the the fieldcatlog information of dynamically given fields :-
like:-
 TABNAME
 FIELDNAME
 DATATYPE
 LENG
 INTTYPE
 ROLLNAME
 DECIMALS
 REFTABLE
 REFFIELD
i mean the internal table is constructed with reference to all the bove metadata.
Problem:- This query run fine with all the fields Except AMOUNT AND QUANTITY fields....
When the selection list contain VBAK-NETWR or MSEG-MENGE..It throws a runtime error.
"The data read during a SLECT access couldnt be inserted into the target field,either conversion is not supported for
the target field's type or the target field is too short."
after this I even tried to construct the dynamic table with CFILEDNAME and QFIELDNAME in the Fieldcatalog.
so now my fieldcatlog looks like this:---
LOOP AT IT_DD03L..
IF IT_DD03L-DATATYPE = 'CURR'.
 TABLEFIELD-CFIELDNAME = IT_DD03L-FIELDNAME .
 ENDIF.
 IF IT_FIELDCAT3-DATATYPE = 'QUAN'.
 TABLEFIELD-QFIELDNAME = IT_DD03L-FIELDNAME .
ENDIF.
 TABLEFIELD-TABNAME = IT_DD03L-TABNAME.
 TABLEFIELD-FIELDNAME = IT_DD03L-FIELDNAME.
 TABLEFIELD-DATATYPE = IT_DD03L-DATATYPE.
 TABLEFIELD-INTLEN = IT_DD03L-LENG.
 TABLEFIELD-INTTYPE = IT_DD03L-INTTYPE .
 TABLEFIELD-ROLLNAME = IT_DD03L-ROLLNAME.
 TABLEFIELD-DECIMALS = IT_DD03L-DECIMALS.
 TABLEFIELD-REF_TABLE = IT_DD03L-REFTABLE.
 TABLEFIELD-REF_FIELD = IT_DD03L-REFFIELD.
APPEND TABLEFIELD.
CLEAR TABLEFIELD.
ENDLOOP.
Note:- this is a test code so ignore performance issues...
Please help me with some code ...to avoid the Runtime erorr.
Thanks,
jeevan.

Hi Jeevan,
Why are moving only few fields from DD03L table to your field catalog? Why don't you use move-corresponding? The following code works for me in ECC6.0.
data: it_dd03l type table of dd03l initial size 0,
 ls_dd03l type dd03l,
 lt_fldcat TYPE lvc_t_fcat,
 ls_fldcat TYPE lvc_s_fcat,
 ls_where(72) TYPE c,
 lt_where LIKE TABLE OF ls_where,
 lt_fld LIKE TABLE OF ls_where,
 lt_data_dy TYPE REF TO data.
field-symbols: <ft_data> TYPE STANDARD TABLE.
select * into table it_dd03l from dd03l
 where tabname = 'VBAK'
 and ( fieldname = 'VBELN' or fieldname = 'NETWR' ).
check sy-subrc eq 0.
loop at it_dd03l into ls_dd03l.
move-corresponding ls_dd03l to ls_fldcat.
append ls_fldcat to lt_fldcat.
move ls_dd03l-fieldname to ls_where.
append ls_where to lt_fld.
if ls_dd03l-fieldname = 'VBELN'.
 clear ls_where.
 concatenate ls_dd03l-fieldname ' <> ''''' into ls_where.
 append ls_where to lt_where.
endif.
endloop.
check not lt_fldcat is initial.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = lt_fldcat
 IMPORTING
 ep_table = lt_data_dy
 EXCEPTIONS
 generate_subpool_dir_full = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 RAISE no_configuration_data.
 ENDIF.
 ASSIGN lt_data_dy->* TO <ft_data>.
check sy-subrc eq 0.
select (lt_fld) from VBAK into corresponding fields of table
 <ft_data>
 where (lt_where).
Thanks
Bala

How to achieve Indenting and Issuing of raw materials in Oracle 11i

Hi
We have an issue with indenting and issuing of raw materials between stores and shop floor.
Business Process is:
1) Shop Floor should send a requisition of raw material to stores department i.e., (Indenting) with authorization of Production Manager.
2) Then based on the requisition, stores needs to issue the raw material to Shop floor with Stores Manager authorization in report format.
Work around:
we have created Flexi Fields (DFF) in the Batches window under context value,
through which we can indent quantity of that item datewise required.
But the trouble is, it is time consuming and data entry is more.
Also we have RM Pick List report, which is not useful for us for this process.
Can any one please give me any idea how to do this process with minimal data entry in optimal time without new customization.
Thanks in advance for your valuable ideas
Prem.

Hi Gordon,
My SBO version is 8.8 PL 10, Indian Database. I want to see the "Raw Material" G/L Account's opening balance in the Opening Balance Column of Trial Balance or similar report of SBO. The technical problem behind this is - the mentioned reports shows the the amounts in OB column if that amount is entered by the OB Transactions (in Administration -> System Initialization). But how to manage the Raw Material / Inventory G/L through this concept, as the OB amount for this is entered through Inventory Initial Quantity. We can do the entry one day before the expected starting date of the financial period, is that can be a standard practice? For. e.g. entering the opening balance for 1-1-06 on 31-12-05.

"File Path and Name" field not displaying correctly

Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

Amend Risk and Issue fields

Similar Messages

Maybe you are looking for