An arbitrary waveform generator using the DSP Module

Hi Guys,
Just got my hands on LabView and the DSP Module, and having a bit of fun atm. Great products. I'm currently using the TI DSK6416, and was wondering if there was a labview model/example of arbitrary waveform generation using this...? Perhaps using a DDS method or something similar?
Thanks in advance...
GibbGodD

GibbGodD,
Hello!
There are quite a few Waveform Generation VIs within Labview, including the Simulate Arbitrary Signal Express VI and the Arbitrary Wave VI. Unfourtuantly, these are not available within the DSP Module. There is a special group of Embedded Signal Generation VIs for the DSP Module, of which one is the Simulate Signal. Take a look at these VIs as perhaps you could use them to build the waveform you are looking for.
To answer your question, I wasn't able to locate a specific example that matched what you were looking for, but if you to Help >> Find Examples >> Toolkits and Modules >> DSP from within LabVIEW you should be able to find some great DSP examples. Particular, the example project "Variety of Signal Types.lvproj" shows the different types of signals the DSP target can generate.
The majority of Arbitrary Waveform Generation information that I was able to find is all related to our Function Generators but not for the devices supported for the DSP Module.
Best of Luck!
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Similar Messages

Error occurred while executing niRFSG Arbitrary Waveform Generator

Hi,
I am trying to execute the niRFSG Arbitrary Waveform Generator.vi.
The inputs at the front panel are as follows -
Resource name : PXI1 Slot2
Center frequency : 1GHz
Power level : -20dBm
Selected waveform : Double Sideband
IQ rate : 1M
NI PXI 5652 RF Signal Generator is connected to slot 2.
When I try to run the program, I can see an error generated after the first step, which is "niRFSG Initialize.vi". The error code is "FFFCFiE4" and the error message says "Device identifier is invalid".
If I select "S2SignalGen" in the Resource name instead of "PXI1 Slot2", I face the same error.
I am using Lab View 2011 and NIPXIe-1075
Could someone please tell me what is wrong?
Thanks so much,
Sharmi

Hi,
What are the RFSA and RFSG devices you have? Please give me all the product numbers (i.e 5652, 5611, 5450 etc.).
I want you to physically connect the RF OUT on the RFSG to the RFIN on the RFSA with an RF cable. Then you will generate a single tone using the RFSG Single Tone Generation.vi example. At the same time, you will run the RFSA SFP and it should capture what you are generating. You cannot bring the SFP into LV, it is its own application.
If you go to Start>> National Instruments>> NI RFSA, are there examples in there? If not, can you got to MAX, expand the Software tab and take a look at what version of RFSA you have. Did you make sure to install RFSA after you installed LabVIEW?
In the NI Example Finder (when in LabVIEW, Help>> Find Examples..), under Hardware Input and Output >> Modular Instruments, do you see RFSA or RFSG in there?
Thank you,
Vimal
Applications Engineer
National Instruments

Fluke 284 Arbitrary Waveform Generator Phase Lock Channel Synchronization

I am using Fluke 284 Arbitrary Waveform generator (not NI instrument). I am trying to make use of LabVIEW to assign channel 1 as the master and the other three as slaves to phase lock the slaves and change precisely the phase offset with respect to the master.
The error explanation that I received was:
Possible reason(s):
Error -1074000000 occurred at Fluke 28x Series.lvlib:Error Query.vi
Instrument reports:Inter channel lock not possible. Refer to manual for more details.
Complete call chain:
Fluke 28x Series.lvlib:Error Query.vi
Fluke 28x Series.lvlib:Configure
I would like to know of there is any other block that I need to add to control the output of the master and the input of the slave. I have referred to chapter 13 of the users manual which I have also attached.
Attachments:
Fluke 284 Manual.pdf ‏1890 KB
Fluke_Block_Diagram.png ‏130 KB

Don't know what the problem is, but the error number is strange. It's not a standard error for Windows, LV or the instrument in question...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to use the function module ....

hi
how to use the function module ssf_function_module_name in smartforms

Hi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu

33522A Function / Arbitrary Waveform Generator, 30 MHz

Hi!
I have got 33522A Function / Arbitrary Waveform Generator, 30 MHz. I want to produce two squarewave signal of 30 KHz, one on each channel. Trick is the wave form should be mirror image. I problem is, wondering if those signal is sysncronise if i drive it via LabView.
Solved!
Go to Solution.

I have played around with one of these in the past, and these signals should be synchronized without any special commands.
This can be done on the front panel of the device or via LabVIEW. The simplest way to set these is make the channel parameters identical except for amplitude, make the amplitude of one output the negative of the other output.
One thing to be aware of ...
although synchronized, sometimes there is a slight phase difference between the two signals, you may have to adjust the phase of one of the signals to match the other. This is best done with an oscilloscope.
Cheers,
mcduff

How to delete lock entries generated by the function module "BAPI_OBJCL_CHANGE"

Hi experts,
I'm now trying to make an add-on program
which updates material master information by the background job.
To update the "Classification" view of material master,
the program calls the function module "BAPI_OBJCL_CHANGE".
If the "RETURN" information is valid,
then the program calls "BAPI_TRANSACTION_COMMIT" (with the "wait" parameter 'X').
Contrary to my intention,
lock entries generated by the function module "BAPI_OBJCL_CHANGE" remains after "BAPI_TRANSACTION_COMMIT".
As a result, the material updated remains locked until the add-on processing ends.
To shoot this trouble, I read some SCN discussions below:
<<lock unlock record>>
⇒ As I wrote above, I checked the parameter for "BAPI_TRANSACTION_COMMIT".
<<BAPI_OBJCL_CHANGE Lock Error !>>
⇒ I cannot call the function module "BAPI_OBJCL_CHANGE" with "IN UPDATE TASK" option
because of "BAPI_OBJCL_CHANGE" attributes.
("BAPI_OBJCL_CHANGE" is not a "Update Module".)
How can I delete lock entries generated by the function module "BAPI_OBJCL_CHANGE" ?
Thanks in advance.
Tom

I quess/hope you want to remove locks in you caller program and not locks required by the update task processing to insure database consistencies...
Did you use the WAIT option in the commit FM, else if there are no other locks in your called program a call of FM DEQUEUE_ALL could solve your problem.
Regards,
Raymond

I want to use the Web module to publish to the a website... What kind of server do I need to be able to publish my website?

I want to use the Web module to publish to the a website... What kind of server do I need to be able to publish my website?

You don't need a server, you just need a web hosting package such as the ones from GoDaddy or many other hosts. You then send the web gallery directly from LR to your web space.
As you're asking such basic questions, it might be best if you read articles like this and see if a friend or colleague can get you started.

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How to use the text module in script

hi,
i script how to use the text modules and how to write the code in layout of the script?

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

Error while using the function module..pack_handling_unit_dlvry

Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.

Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.

How to use the function module 'HR_ES_FEATURE_BACKFIELD'

Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.

hey iam from functional side can u be little bit clear of that feature
thanks
sikindar

After I use the Develop module in LR4 I edit in PS-CS4, now the develop changes do not show in CS4.

After I use the Develop module in LR4 I edit in PS-CS4, now the develop module changes do not show in CS4.

You need to send the file over to CS4 as a PSD (with Lightroom Adjustments checked)
CS4 cannot interpret the newer processing version used by Lightroom 4

Can i use the Service Module?

Hello all,
can i use the service module w/ the ff. scenario?
items are manage by serial numbers., but we dont sell it, we purchase the item for internal use only. this are the ff. information that i want to track.
1.     track the history of the item everytime it has undergone for repair
a.     some cases the repair takes place within the company, meaning employees within the company take care on the labor but only parts will be purchase
b.     some cases the repair takes place in business partner, (PO Service in this case)
2.     track the parts that was replace
what will be my work around for this. please advice
best regards,
Fidel

Hi Fidel,
You would need the following is you wanted to use the Service Module to track internal serialized inventory/hardware:
1. Set up a customer record that would represent the internal use/company/department
2. Manually create the Customer Equipment Card (when receiving the equipment on GRPO or AP invoice, you would want to use a warehouse that represents internally-used equipment/assets)
Repairs: you could update the status of the CEC record when it's being repaired (or have a repair WH for when it's sent off-site).
Expenses: related expenses could be done by creating a Service Call linked to the CEC with details/purpose, etc. which would be tracked on the Expenses tab but the transactions don't include AP (PO's), the assumption being that any expenses would be charged back to the customer, which in this case would be internal.
If you want the expenses linked to the item/CEC then you could use Activities from Service Call and you can link the PO/AP invoice thru the Activity. You could have one S/C record that would be for tracking equipment repairs and leave it open for as long as you have the item - that would be the link between the Activities and the CEC/equipment record. Whenever repairs are to be record, you would only need to pull up the CEC record and drill-down to the S/C to create a new Activity record. This will also enable you to see how many repairs are being down - you could even breakdown the Activity on internal vs external (have it as a Type, on which you can then report on overall as well as by item).
It will depend on what info you want to capture and if you need anything for reporting that would be that detailed (i.e. down to a serialized item) as to what process & setup you want to use. Try out the above and hopefully something will work out.
HTH,
Heather

Has anyone used the QuickUSB module (Bitswise Systems) to interface to a USB Camera via IMAQ for USB?

Has anyone used the QuickUSB module made by Bitwise Systems with LabVIEW for image acquisition. I have a USB camera and I'm trying to use the IMAQ for USB controls to no avail. Any input is appreciated.

Are you using the NI-IMAQ for USB functions or are you calling the QuickUSB libraries from LabVIEW? Unless the USB camera is DirectShow compliant, then it will not work with the NI-IMAQ for USB driver. You can use the Code Interface Node in LabVIEW to call external dll's, and it looks like from QuickUSB's website that is the best way to go. Hope this helps.
Jason N

How to use the Function Module RH_READ_INFTY_1001...

Hi,
Can any one Tell me .. How to do the same functionality .. given below (select).
Using the Function Module RH_READ_INFTY_1001...
*reads CP (Central Person) based on BP (Business Partner)
Select single objid (Object ID)
       from hrp1001
       into gv_sobid
       where subty eq 'B207'
       and sclas eq 'BP'
       and sobid eq is_header-partner.
*reads P (Person) Based on determined BP (Business Partner)
select single sobid (ID related Object)
       from hrp1001
       into gv_sobid
       where subty eq 'B209'
       and   otype eq 'CP'
       and   objid eq gv_sobid.
*determines UserID from IT0105 for determined personell ID
select single usrid
       from pa0105
       into gv_usrid
       where pernr eq gv_sobid
       and   subty eq '999'.
Reply ASAP....
Answers will be Rewarded...

objects-plvar = l_plvar.
              objects-otype = 'S '.
              objects-sobid = l_positions-objid.
              APPEND objects.
              CLEAR i1001_itab. REFRESH i1001_itab.
              CALL FUNCTION 'RH_READ_INFTY_1001'
                   EXPORTING
*                       AUTHORITY       = 'DISP'
*                       WITH_STRU_AUTH = 'X'
                        istat           = '1'
*                       EXTEND          = 'X'
                        subty           = 'A008'
                        begda           = l_keyda
                        endda           = l_keyda
*                       CONDITION       = '00000'
*                       SORT            = 'X'
*                       WITH_EV         = ' '
*                       ADATA           = 'X'
                   TABLES
                        i1001           = i1001_itab
                        objects         = objects
                   EXCEPTIONS
                        nothing_found   = 1
                        wrong_condition = 2
                        OTHERS          = 3.
              IF sy-subrc <> 0.
                CLEAR i1001_itab. REFRESH i1001_itab.
                CLEAR mngr_nr.
              ELSE.
                READ TABLE i1001_itab WITH KEY sclas = 'P'.
                IF sy-subrc = 0.
                  mngr_nr = i1001_itab-sobid.
                ELSE.
THis is the sample code to use function module using this function module you can get upto HRP1001 selection for userid you need to use same select you write for PA0105

An arbitrary waveform generator using the DSP Module

Similar Messages

Maybe you are looking for