An unexpected error occurred during authentication

When one of our users tries to login they get this message in red above the login text box, "An unexpected error occurred during authentication." We can't recreate the error and have made sure the user has their security and browser settings correct. They are using IE 6.02 on XP. We have tested this configuration and it works for us. We have also tested their login and we can login here. I can't find anything about this error message and have run out of places to look. Does anyone have any suggestions?

Even i have the same issue...were you able to figure out how that can be done.

Similar Messages

An unexpected error occurred during validation

Hi Ramesh,
This is Jaden I work with Shamik :)
We had the following question we were hoping you could help us with.
We are trying to recieve a 850 document in the b2b server. We get the following error - An unexpected error occurred during validation
our document we recieve is below. We use the document analizer and the document validates against the .ecs file fine. We notice that the server is missing the b2b log any thoughts?
ISA~00~ ~00~ ~ZZ~Allied ~ZZ~UPS ~070721~1459~U~00200~000001008~0~P~+'GS~PO~Allied~UPS~20070721~1459~1008~X~004010'ST~850~1008'BEG~00~SA~60009~86974~20070717'DTM~010~20070717'TD5~~2~000001_DHL_A_2DA'N1~ST~19427~92~7984'N3~500 Oracle Pkwy'N4~Redwood City~CA~96504~US'N1~BT~19427~92~7984'N3~500 Oracle Pkwy'N4~Redwood City~CA~96504~US'PO1~1.1~1~EA~~~VP~50934~~~DV~255154'PID~F~~~~3PL Test Item with Lot Control'PO1~2.1~2~EA~~~VP~50936~~~DV~255155'PID~F~~~~3PL Test Item with Serial Control'PO1~3.1~3~EA~~~VP~50935~~~DV~255156'PID~F~~~~3PL Test Item with Locator Control'PO1~4.1~4~EA~~~VP~50936~~~DV~255157'PID~F~~~~3PL Test Item with Serial Control'PO1~5.1~100~EA~~~VP~50936~~~DV~255158'PID~F~~~~3PL Test Item with Serial Control'SE~21~1008'GE~1~1008'IEA~1~000001008'

Hello jaden,
Please edit tip.properties as follows and restart b2b. The log file will be generated at OH/ip/log/b2b/b2b.log.
oracle.tip.LogType=text
b2b.oracle.tip.DiagnosticLevel.B2B=DEBUG
Make sure the delimiter used as part of configuring the document, i.e Document Protocol parameters are appropriate. The document might have validated in the spec builder as the delimter which is defined there might be different.
Please setup a quick call if you still face issues.
Rgds,
Ramesh

An error occurred during authentication. Try again later or contact your

Hi
I am try to login OBIEE 11g analytics (http://siva:9704/analytics) iam getting error "An error occurred during authentication. Try again later or contact your system administrator". Please help me .my Em and Admin console and rpd working fine.
I have problem only analytics login..
Thanks
Naveen

I would say try this first
1. Log in to EM
2. Click on Business Intelligence link on he left-hand side to expand it
3. Click on Coreapplication.
4. Click on the Capacity Management tab
5. Click Restart All
If helps pls mark as correct else let me know updates

An unexpected error occurred during export. [JSX]

Whenever I try to convert a Flash file into HTML5 I am continuously getting an error as "An unexpected error occurred during export. [JSX]".
I am unable to understand where the error has occured. Please help me out with this.

Hi NIranjan,
Can you try the solution in this post? Unexpected error on export / CreateJS / Discussion Area - CreateJS Support
Thanks,
Preran

I am trying to connect a 3rd airport express to my network, but am getting "an unexpected error occurred" when trying to connect. Any ideas how to fix?

I am getting, "an unexpected error occurred" during set up of a 3rd airport express. Any ideas why or how to correct?

Are you using the IMac in your profile, or are you using the iPhone or iPad to set up the Express?
If you are using the iMac, what operating system is installed on the Mac?

An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP).

Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.

Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support

Error occurred during initialization of VM. Could not reserve enough space

Dear All,
I am trying to install SAP NetWeaver 7.0 SR2 SP9 on Oracle 10.2 and platform is Windows 2003 32 bits. While installing, in t he restarting the JAVA Instance step, server0 node is getting shutdown. When I further analyzed dev_server0 log, I could get below useful information:
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 6008] JLaunchIAbortJava: abort hook is called
[Thr 6008] **********************************************************************
*** ERROR => The Java VM aborted unexpectedly.
*** Please see SAP Note 943602 , section 'Java VM crashes'
*** for additional information and trouble shooting.
[Thr 6008] JLaunchCloseProgram: good bye (exitcode = -2)
I referred the note mentioned above and it inturn referred to note# 940893. I followed many other sap notes also. However my above problem did not solve yet. I have checke my JAVA SDK version also. It is j2sdk1.4.2_11 and seems to be fine. My systems memory is 3 GB and I gave 20 GB as Virtual memory. I dont think that it should be a memory problem. However somewhere I am lost and can not get the grip over the problem to resolve it.
May I request all of you to kindly help me on above issue? Please let me know if you need any more information.
Waiting for your kind replies.
Regards,
Faisal

Dears,
Thank you very much for your replies. The heap size was 1024. I changed it to the below:
Heap Size=512 (earlier 1024)
Changed below paramters in configtool:
-Xmx512m (earlier 1024)
-Xms256m (earlier 1024)
Hope this information will be helpful to others as well.
Once again, I thank both of you to guide me in proper directions.
Regards,
Faisal

Excel SSAS Tabular error: An error occurred during an attempt to establish a connection to the external data source

Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.

Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support

System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
It then gives me an error log of ;
2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
2015-04-23 14:44:06Z: Info: Exitcode = 0
2015-04-23 14:44:06Z: Info: Logging ended.
I have installed this software succesfully on other machines previously.....

Hi RyanWelsh78,
This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error occurred in tag CFX_IMAGE Unexpected error occurred - help!

Hello,
We have a few clients on an IIS server running coldfusion sites. Part of their content management systems include thumbnail creation of images. Unfortunately, without any obvious reason, all of the image resizing code started failing. We're using the CFX_IMAGE tag.
An example of our code looks like:
<CFX_IMAGE
 ACTION = "RESIZE"
 FILE = "#uploaded_filename#"
 OUTPUT = "#thumbnail_filename#"
 Y = "100"
 THUMBNAIL = "NO"
 JPEG_QUALITY = "80"
 JPEG_OPTIMIZE = "ON"
>
A few of our applications rely on the CFX_IMAGE tag, and each one uses a different directory for the thumbnails and slightly different code. To have all of them fail at once is definitely odd. I also ran a search on the windows server for files that have been modified during the day that things started failing and I haven't seen anything out of the ordinary.
Here's the exact error that is being shown:
Error occurred in tag CFX_IMAGE
Unexpected error occurred while processing tag.
The cause of this error is yet unknown.
The error occurred in C:\clients\(client-name)\admin\photo_upload_handler.cfm: line 25
23 : FILE = "#uploaded_filename#"
24 : OUTPUT = "#thumbnail_filename#"
25 : Y = "100"
26 : THUMBNAIL = "NO"
27 : JPEG_QUALITY = "80"
Sorry, I don't have the exact CFX_IMAGE source in front of me.
I've checked file permissions on the folders where the thumbnails should be generated. The permissions look good, especially since coldfusion is able to upload the original files there (the ones that need the thumbnails generated).
Any insights would be most apprecated,
- Bret

This is exactly what I started seeing a week ago on a CF7 server. We migrated
to CF8 last night, but application continues to fail.
Did you discover the problem?

OLAP Error:The underlying connection was closed: An unexpected error occure

We have recently installed BPC 51 (SP2). This been working fine for months until yesterday. Now we are getting errors on OLAP Database. Following is the problem description. Any help would be appreciated.
Received error "The underlying connection was closed: An unexpected error occurred on a send." while processing dimension. This message appears during 'Create Dimension' sub step( step 2/5). After this BPC server crashes.
The same error appears while deleting appset during 'Delete OLAP Database' sub step (step 2/4). We are also not able to restore an appset since the process hangs during OLAP Database stage.
Software version: BPC Version 5.0.102 SP2
MS SQL Server 2005
Microsoft SQL Server Management Studio      9.00.3042.00
Microsoft Analysis Services Client Tools      2005.090.3042.00
Microsoft Data Access Components (MDAC)      2000.086.3959.00 (srv03_sp2_rtm.070216-1710)
Microsoft MSXML      2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer      6.0.3790.3959
Microsoft .NET Framework      2.0.50727.1433
Operating System      5.2.3790
Thanks

Yes we did that several time, but did not solve the problem.
Finally, we processed all the dimensions, applications, appsets within SQL server studio and the problem is resolved. I am not sure if this would surface again.
Thanks
Edited by: Sankaranarayanan Janakiraman on Jun 19, 2008 8:34 AM

An unexpected error occurred processing your request. Check the logs for details and correct the problem.

Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
Rakesh

Hi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Insallation of SAP NW : Error occurred during initialization of VM !!!

Hi everyone,
I have reinstalled the SAP NetWeaver 2004s SP9, the installation went well, but this time i have some problems with the J2EE Server (with an exit code equal to -2)
The result of the Developer trace is :
[Thr 3100] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 392] JLaunchIAbortJava: abort hook is called
[Thr 392] **********************************************************************
ERROR => The Java VM aborted unexpectedly.
Please see SAP Note 943602 , section 'Java VM crashes'
for additional information and trouble shooting.
[Thr 392] JLaunchCloseProgram: good bye (exitcode = -2)
Thanks very much for your help, i will be grateful.
Regards
Hassan

Hi Ben,
I always have the same problem !!! even if i moved the content of the directory .../j2ee/os_libs/ into different directory
Thanks & Regards
Hassan

VSS Error: "An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes."

Hi all,
at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
backup is written directly to SAS tape loader. There error is generated on this server.
Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
on this server.
Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
is the event log (translated from a german system):
Event ID: 12293
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
the Volume Shadow Copy Service.
Process:
Volume Shadow Copy polling
Volume Shadow Copy delete
Context:
   Executioncontext: Coordinator
   Executionkontext: Coordinator
And
Event ID: 8193
Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
Process:
Volume Shadow Copy delete
Context:
   Executioncontext: Coordinator
There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
What I already have tried:
Disabled Antivirus during the whole backup
Installed latest Service Pack for Backup Exec
Rebooted the server
vssadmin list writers do not show any errors
consult eventid.net for other possible solutions
no limits set for vaa
Anymore ideas from you guys?
Best regards,

Hi Shaon,
vssadmin list providers gave the following output:
vssadmin list providers
vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
(C) Copyright 2001-2013 Microsoft Corp.
Anbietername: "Microsoft File Share Shadow Copy provider"
   Anbietertyp: Dateifreigabe
   Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
   Version: 1.0.0.1
Anbietername: "Microsoft Software Shadow Copy provider 1.0"
   Anbietertyp: System
   Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7
Unfortunately theres not Symantec VSS Provider listed.
Best regards,
Christoph

The underlying connection was closed. An unexpected error occurred on send

Hi,
I am unable to log into the BPC Admin console. I get this error "The underlying connection was closed. An unexpected error occurred on a send".
I saw a SAP message indicating that turning the Norton firewall off resolves this. I don't have this on my computer. Any ideas on what causes this and how to resolve it?
thanks
Agnes

The problem probably is in the network connection of the machine.
I have seen this problem when I logged in to SAP BPC through a very weak WLAN connection which sometimes lost connection. If the connection was lost during a data send I got this error. So maybe it has something to do with a bad network connection on the machine you are working on.
Side note, I only experienced the problem when I logged on to a Citrix environment throug an internet connection.
When I have a decent connection I don't experience the problem.

An unexpected error occurred during authentication

Similar Messages

Maybe you are looking for