Another two errors in compiling StoreFrontService?

Hi, I followed the instructions at http://www.oracle.com/technology/products/jdev/samples/fod/index.html, but got the following two errors.
D:\fod\StoreFrontModule\StoreFrontService\src\oracle\fodemo\storefront\entities\associations\CategoryTranslationToCustomerInterests.xml
Error(16,4): Attribute LockTopContainer not defined on element AssociationEnd
Error(32,4): Attribute LockTopContainer not defined on element AssociationEnd
Please help.
Thanks.

There is a known bug that occurs if you attempt to compile the project before JDeveloper completes the indexing of the ADF BC project. The best way to reconcile this issue is to unzip a clean copy of the demo and attempt to open it, making sure to give ample time for JDeveloper to index the ADF BC project prior to compiling.
Regards,
RiC

Similar Messages

Two errors in compiling Hello by fortran

Pls. help to solve following two error. which I get during execution of Hello project on Oracle Solaris Studio 12.3 in VMware 8. I am also giving the makefile.
Thanks in advance.
error
1)
/usr/bin/ld: cannot find -lpthread
/usr/bin/ld: cannot find -lm
/usr/bin/ld: cannot find -lc
2)
dmake: Fatal error: Command failed for target `.build-conf'
Current working directory /root/SolStudioProjects/Hello_2
makefile
# Copyright (c) 2009-2010, Oracle and/or its affiliates. All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
# * Neither the name of Oracle nor the names of its contributors
# may be used to endorse or promote products derived from this software without
# specific prior written permission.
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
# THE POSSIBILITY OF SUCH DAMAGE.
# There exist several targets which are by default empty and which can be
# used for execution of your targets. These targets are usually executed
# before and after some main targets. They are:
# .build-pre: called before 'build' target
# .build-post: called after 'build' target
# .clean-pre: called before 'clean' target
# .clean-post: called after 'clean' target
# .clobber-pre: called before 'clobber' target
# .clobber-post: called after 'clobber' target
# .all-pre: called before 'all' target
# .all-post: called after 'all' target
# .help-pre: called before 'help' target
# .help-post: called after 'help' target
# Targets beginning with '.' are not intended to be called on their own.
# Main targets can be executed directly, and they are:
# build build a specific configuration
# clean remove built files from a configuration
# clobber remove all built files
# all build all configurations
# help print help mesage
# Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
# .help-impl are implemented in nbproject/makefile-impl.mk.
# Available make variables:
# CND_BASEDIR base directory for relative paths
# CND_DISTDIR default top distribution directory (build artifacts)
# CND_BUILDDIR default top build directory (object files, ...)
# CONF name of current configuration
# CND_PLATFORM_${CONF} platform name (current configuration)
# CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration)
# CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration)
# CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration)
# CND_PACKAGE_DIR_${CONF} directory of package (current configuration)
# CND_PACKAGE_NAME_${CONF} name of package (current configuration)
# CND_PACKAGE_PATH_${CONF} path to package (current configuration)
# NOCDDL
# Environment
MKDIR=mkdir
CP=cp
CCADMIN=CCadmin
RANLIB=ranlib
# build
build: .build-post
.build-pre:
# Add your pre 'build' code here...
.build-post: .build-impl
# Add your post 'build' code here...
# clean
clean: .clean-post
.clean-pre:
# Add your pre 'clean' code here...
.clean-post: .clean-impl
# Add your post 'clean' code here...
# clobber
clobber: .clobber-post
.clobber-pre:
# Add your pre 'clobber' code here...
.clobber-post: .clobber-impl
# Add your post 'clobber' code here...
# all
all: .all-post
.all-pre:
# Add your pre 'all' code here...
.all-post: .all-impl
# Add your post 'all' code here...
# help
help: .help-post
.help-pre:
# Add your pre 'help' code here...
.help-post: .help-impl
# Add your post 'help' code here...
# include project implementation makefile
include nbproject/Makefile-impl.mk
# include project make variables
include nbproject/Makefile-variables.mk

Which operating system are you using? If you are using Linux, which release of which distribution are you using?
The libraries named in your posting are Solaris system libraries. The Solaris linker knows where to find them.
Robert Corbett

Error in compiling the BPEL process

Hi,
I am getting the following error while compiling the BPEL process. Its a simple process with a Pick activity and have two onMessage activities. One of the activity is having the correlation set and another one is not. Is that the problem ? If yes what should I do to resolve this.
Any thoughts ?
{color:#ff0000}[bpelc] classpath is: C:\apache-maven-2.0.9\boot\classworlds-1.1.jar;D:\workspace\Eclipse\ExternalUserWorkflow\src\test\resources\ContractorServiceFailureDeployment;D:\oracle\product\10.1.3.1\OracleAS_1\bpel\lib\orabpel-ant.jar;D:\oracle\product\10.1.3.1\OracleAS_1\bpel\lib\orabpel-boot.jar;D:\oracle\product\10.1.3.1\OracleAS_1\bpel\lib\orabpel-common.jar;D:\oracle\product\10.1.3.1\OracleAS_1\bpel\lib\orabpel-exts.jar;D:\oracle\product\10.1.3.1\OracleAS_1\bpel\lib\orabpel-thirdparty.jar;D:\oracle\product\10.1.3.1\OracleAS_1\bpel\lib\orabpel.jar;D:\oracle\product\10.1.3.1\OracleAS_1\bpel\lib\xmlparserv2.jar
[bpelc] C:\DOCUME~1\krishnaa\LOCALS~1\Temp\bpelc1637.tmp\BPEL-INF\src\bpel\test\BPEL_BIN.java:5656: nested class bpel.test.BPEL_BIN. $BPELC_BpRpl0 must be declared abstract. It does not define java.lang.String __getInitiateCorrelationSetNames()[] from class com.collaxa.cube.engine.ext.wmp.BPELReplyWMP.
[bpelc] public final static class $BPELC_BpRpl0 extends com.collaxa.cube.engine.ext.wmp.BPELReplyWMP
[bpelc] ^
[bpelc] 1 error
[bpelc] ORABPEL-01005
[bpelc]
[bpelc] Failed to compile classes.{color}
Thank you.

It looks to me that, you have manually changed something in the BPEL process code.
A process designed via Jdev/designer can only have one variable in inputHeaderVariable syntax.
While Bpel standard supports calling inputHeaderVariable with two variables, if the generated file was tinkered with to add an extra variable, then this is not Jdev bug and you need to use the latest JDev 10.1.3.4.
If you are not manually modifying or tinkering the process, then let me know what are the errors you get out of compiling that new BPEL project in JDeveloper 10.1.3.4 ?
Hope this helps!
Cheers
Anirudh Pucha

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

Error while compiling the PO Item Category KFF

Kindly help me. I am new and learning Purchasing module and now stuck because of an error while compiling the PO Item Category KFF. This is because a segment is saved in the database incompletely.
Now the segment does not show in the Segments Summary form. But when I enter the same Number, I get the error APP-FND-00924: You chose a sement number that is used by another segment.
When I freeze and compile the structure with different segments, I get the error
APP-FND-00668: The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: FDFRKS could not find the structure definition for the flexfield specified by Application = &APPL, Code = MCAT and Structure number = 201 (APPID=401)
APP-FND-00738: Error detected when attempting to load value set on Context: &CONTEXT for Segment: &SEGMENT in Routine: FDFBKS
APP-FND-01564: ORACLE error 1403 in FDFAVS3
Cause: FDFAVS3 failed due to ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and was executed from the file &ERRFILE.
Regards
Reem

Hi Sandeep
Sorry that I am bothering with basic questions, but I am not able to run any Select queries. It gives error Table or View does not exist. I can see the table from ALL_TABLES view, but I cannot Select.
I have logged in as oracle user. This is not Vision datbase. Can you let me know the default dba user and password or how to get the permission?
Regards
Reem

Issues installing ruby 1.9.3 - error: C compiler cannot create executables

I am trying to install ruby 1.9.3 on my Macbook pro but I've run into a wall.
Here are the essentials;
OS: OS X 10.7.3
Xcode: 4.3
When I run the rvm command I get the following...
"rvm install 1.9.3"
Fetching yaml-0.1.4.tar.gz to /Users/vindigo/.ram/archives
Extracting yaml-0.1.4.tar.gz to /Users/vindigo/.rvm/src
Configuring yaml in /Users/vindigo/.rvm/src/yaml-0.1.4.
Error running ' ./configure --prefix="/Users/vindigo/.rvm/usr" ', please read /Users/vindigo/.rvm/log/ruby-1.9.3-p125/yaml/configure.log
Compiling yaml in /Users/vindigo/.rvm/src/yaml-0.1.4.
Error running 'make ', please read /Users/vindigo/.rvm/log/ruby-1.9.3-p125/yaml/make.log
Database file /Users/vindigo/.rvm/config/packages does not exist.
Installing Ruby from source to: /Users/vindigo/.rvm/rubies/ruby-1.9.3-p125, this may take a while depending on your cpu(s)...
ruby-1.9.3-p125 - #fetching
ruby-1.9.3-p125 - #extracted to /Users/vindigo/.rvm/src/ruby-1.9.3-p125 (already extracted)
ruby-1.9.3-p125 - #configuring
Error running ' ./configure --prefix=/Users/vindigo/.rvm/rubies/ruby-1.9.3-p125 --enable-shared --disable-install-doc --with-libyaml --with-opt-dir=/Users/vindigo/.rvm/usr ', please read /Users/vindigo/.rvm/log/ruby-1.9.3-p125/configure.log
There has been an error while running configure. Halting the installation.
CONFIGURE.LOG
[2012-02-26 14:56:49] ./configure --prefix="/Users/vindigo/.rvm/usr"
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... config/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... no
configure: error: in `/Users/vindigo/.rvm/src/yaml-0.1.4':
configure: error: C compiler cannot create executables
See `config.log' for more details
MAKE.LOG
make: *** No targets specified and no makefile found. Stop.
Another suggestion I received was to use the following command...
"rvm install 1.9.3 --with-gcc=clang"
but I get the same results.
At this point I've exhausted my options and I am not sure what to try next, other than starting from scratch and reloading the entire OS.
Any help would be greatly appreaciated.
Thanks,
Rich

Phew! That was harrowing.
Found this, and it solved the problem. Refreshingly, it was written in English and done well at that!
http://pragmaticstudio.com/blog/2010/9/23/install-rails-ruby-mac
Follow all the instructions. The main missing ingredient for me was downloading the developer tools for the command line from Apple. I had to register there, but it was free. These tools seemed to install the compiler where it was needed. You might need a github something or other, I don't know. I think I downloaded it as some point. Anyway, I did everything this author told me, and now I have my first rails app! Good luck - Joel

Pragma error when compiling with SDK X

Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
Magda

Without seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378

Error in compiling SQL Expression

In the [Error in SQL Expression; thread, Kurt Reinhardt wrote "Please note, a SQL Expression can only return a single, distinct value per each record in the main recordset.", I tried this where my main Record Selection's SQL query is:
{GLF_LDG_ACC_TRANS.ldg_name} = {@&CH_LDG_GL_ACT_CURR} and
{GLF_LDG_ACC_TRANS.period} = {@&CH_PERIOD_GL_CURR} and
{GLF_LDG_ACC_TRANS.ACCNBRI} "99991103" and
{GLF_LDG_ACC_TRANS.DOC_REF1} "{%SundryCreditors}" and
{GLF_LDG_ACC_TRANS.DOC_TYPE} = "$APINVCE"
My SQL Expression %SundryCreditors is:
select doc_ref1
from glf_ldg_acc_trans
where ldg_name = 'APLED09'
and period = "GLF_LDG_ACC_TRANS"."PERIOD"
and doc_ref1 = "GLF_LDG_ACC_TRANS"."DOC_REF1"
and accnbri like 'SUNDRY%'
which essentially queries the same table as the main recordset using the same key fields, and returns one row only. However, when I click on the Check button in the Formula Workshop window, I get the error message "Error in compiling SQL Expression : Database Connection Error: '42000:MicrosoftODBC SQL Server DriverSQL ServerIncorrect syntax near the keyword 'select'. Database Vendor Code: 156 '".
Do you know what is my issue?

If you know what you're doing, you can add a full select statement into a SQL Expression... And Kurt is correct when he says that it may only return a single row of info. Don is also correct when he says that this not what SQL commands are designed for.
Here's what's happening...
When you link your tables in the Database Expert and drop fields onto the design surface (and optionally, add criteria to the Select Expert), CR builds out a SQL statement that can is to be sent out to the db server so that the data can be returned. You can view this SQL by going to Database > Show SQL Query...
When you add a SQL Expression, CR inserts it into the SQL Query as another data column. This is typically done to take advantage of functions that are available in the data base but not in CR.
A few crafty individuals, like Kurt, have figured out that you can in fact inset a full SELECT query into a SQL Expression and it will be inserted into the CR generated querie's SELECT list as a sub-query.
Bear in mind 2 things... #1) You have to be familiar with SQL syntax, namely you have to know the proper syntax for using sub-queries in a SELECT list in your data base. #2) CR doesn't officially support is behavior and they won't offer you any help if the current functionality is removed in later versions.
HTH,
Jason

Error in compiling Flex application (1).

hi experts,
i have created a small Iview in VC.
It was compiling an running till two days back.
Today it has started giving deplyoment error.
<b>Error in compiling Flex application (1).</b>
here is the trace. can anyone please tell me what might be the issue.
{0}#1#com.sap.portal.guimachine.deployer.CompilingException: Error in compiling Flex application (1). Consult log file for details.
     at com.sap.portal.guimachine.deployer.FileHelper.compileFlex2(FileHelper.java:769)
     at com.sap.portal.guimachine.deployer.PARGenerator.createCompilePar(PARGenerator.java:490)
     at com.sap.portal.guimachine.deployer.PARGenerator.generate(PARGenerator.java:93)
     at com.sap.portal.guimachine.htmlbkit.utils.CommandHandlerService.doDeploy(CommandHandlerService.java:51)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.guimachine.portalconnector.commandhandler.AbstractCommandService.invoke(AbstractCommandService.java:84)
     at com.sap.guimachine.portalconnector.dispatcher.Dispatcher.handleCommandHandler(Dispatcher.java:175)
     at com.sap.guimachine.portalconnector.dispatcher.Dispatcher.doContent(Dispatcher.java:126)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.

On what release and SP level are you? Can you describe the model?
Did you do any changes or upgrades of the Portl/Visual Composer the last two days?

Error while compiling form 6i

Hi All,
I am getting Memory fault error while compiling the form.
I tried with two commands.
I executed these commands from $AU_TOP/forms/US
At first I tried with
f60gen $AU_TOP/forms/US/XXTEST.fmb apps/opopop123 output_file =$XXEEG_TOP/forms/US/XXTEST.fmx
and I got following error
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package body APP_CUSTOM...
Memory fault
Secondly I tried with
f60gen Module=/opt/egapmdev/ebmdappl/au/11.5.0/forms/US/XXTEST.fmb Userid=apps/opopop123 Module_Type=FORM batch=yes Output_File=XXTEST.fmx
Now the error came was only 'Memory fault' without any other messages.
Please any one look into it.

Sure,
I used two commands both are not working.
First
f60gen $AU_TOP/forms/US/XXTEST.fmb apps/opopop123 output_file =$XXEEG_TOP/forms/US/XXTEST.fmx
Second
f60gen Module=/opt/egapmdev/ebmdappl/au/11.5.0/forms/US/XXTEST.fmb Userid=apps/opopop123 Module_Type=FORM batch=yes Output_File=XXTEST.fmx
Both are not working
Error messages in first command
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package body APP_CUSTOM...
Memory fault
Error message in second command
Memory fault
I ran this command from
$AU_TOP/forms/us --(/opt/egapmdev/ebmdappl/au/11.5.0/forms/US)
Looking forward from you.

Error when compile COBOL file

I install the Cumulative packages of PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0 - Maintenance Pack 6 - Multi-Language for my HRCS system. After I deploy the COBOL files, I try to compile them. Most of the files can be compiled. However, when I compile of all 2007-2008 INAS COBOL programs using the file named inasbl07.mak, the error happed.
./inasbl07.mak : Convert INAS files for Unicode ....
INAS 2007-2008 Unicode conversion routine beginning on Wed Oct 21 16:04:20 CST 2009...
> Creating Work Area #1 folder...
> Creating Work Area #2 folder...
> Copying INAS 2007-2008 COBOL files to Work Area #1...
> Renaming INAS COBOL files in Work Area #1 to PS Standard...
> Executing COBOL Unicode Conversion on all INAS 2007-2008 COBOL files in Work Area #1...
Conversion Summary for Source Codes in :
Source: /opt/pt/inaswk07/
Target: /opt/pt/inaswk2/
Number of Copy Libraries Read: 15
Modified: 15
Not Modified: 0
Number of Programs Read: 17
Modified: 17
Not Modified: 0
> All INAS COBOL files converted for Unicode successfully and written
> to Work Area #2...
> Renaming INAS COBOL files back to original file names...
> Copying Converted INAS 2007-2008 COBOL files to COBOL Unicode Source area...
> All INAS 2007-2008 COBOL files successfully converted and staged.
INAS Unicode conversion routine ending on Wed Oct 21 16:04:21 CST 2009...
./inasbl07.mak : INAS Unicode Conversion step done...
.cbl not found : Error: File FMCALC07
I find one answer from metalink, it says： When transferring the INASBL07.cbl file, make sure it is transferred as binary. If you open the file on unix and there is an ^M at the end of the file, the compile will error. However, I copy the file using the command scp from another machine that can compile successfully and I don’t open the file, the error still happed.
My entironment :
RedHat4
weblogic 9.2
oracle database 10.2.0.1
peopletools 8.49
hrms and campus solution 9.0

i am very glad and appreciate for your help, but i would like to know how to get the value of a radio button.
like in another JSP file i have :
<input type="radio" name="type" value="Return" checked>
Return
<input type="radio" name="type" value="OneWay">
One Way
and when i try to get the value which is checked, i put
String type = request.getParameter(type.checked);
but this doesn't work,
i would be very appreciate for your help. Thank you

Exception in thread "main" java.lang.Error: Unresolved compilation problem

The following code:
     public boolean find(MusbachJ_Person person,BstNode node)
          //p.l(person);p.l(node.intData);
          if(node.intData.compareTo(person)==0)
               return true;
          if( node.leftNode != null ) find(person,node.leftNode );
          if( node.rightNode != null ) find( person, node.rightNode);
          else
               return false;
     }returns the following compilation error:
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
     This method must return a result of type boolean
     at MusbachJ_TreeNode.find(MusbachJ_TreeNode.java:32)
     at MusbachJ_PeopleTree.main(MusbachJ_PeopleTree.java:91)
But I don't understand, the else statement is right there, what more does it want? Thanks! :)

John_Musbach wrote:
Exception in thread "main" java.lang.Error: Unresolved compilation problem: Unresolved compilation problem is an error that you'll only ever see if you're using an IDE. If you used the javac compiler, then you would have seen that the code doesn't even compile.
The reason (as others have pointed out) is, that some paths through your method don't return a value.
I'll re-write your code in the code-style that I usually use, because then it might be easier for you to see the problem:
public boolean find(MusbachJ_Person person,BstNode node)
     if(node.intData.compareTo(person)==0) {
          return true;
     if( node.leftNode != null ) {
          find(person,node.leftNode );
     if( node.rightNode != null ) {
          find( person, node.rightNode);
     else {
          return false;
}There are two prolbems. I'll spell out the first and let the other one for you to find:
1.) you don't do anything with the return-values of the find-methods you are calling. What do you want to do with them?
2.) What do you return if the current node is not the one that you want and you've got a right node?

Error 1009 compiling in automation_air or automation_airspark library

Hello,
While attempting to use the Flex automation framework, I am running into problems starting the application.
Out of the all of the libraries found under ./libs/automation, the these two libraries give the same error pasted below. This occurs of I utilize one or both of the suspect libraries in any combination of the other libraries.
The libraries in question are:
<library>libs/automation/automation_air.swc</library>
<library>libs/automation/automation_airspark.swc</library>
Here is the error copied from the error dialog:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::kickOff()[E:\dev\hero_private_beta\frameworks\ projects\framework\src\mx\managers\SystemManager.as:2702]
at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::preloader_completeHandler()[E:\dev\hero_privat e_beta\frameworks\projects\framework\src\mx\managers\SystemManager.as:2610]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler()[E:\dev\hero_private_beta\frameworks\projects\fram ework\src\mx\preloaders\Preloader.as:539]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
The application is an AIR application based on Flex 4.5.
For troubleshooting, I took the swc from previous released 4.x versions and compiled it into the application. The error above is still given. I do not see any errors during compilation. The 1009 error given above only appears when I attempt to start the application.

Change the creation policy on the parent container to 'all'. The default creation policy is to not create an item until it is needed on the stage, so when you try to reference the custom component that is on the canvas that has not yet been displayed, it hasn't been created yet.

PS CS6 can't save png or jpg getting two errors

Since the update I dowloaded for PS CS6 yesterday, I have been unable to save my psd file to png's or jpg even with one single layer. The two error messages I get are "cannot save file out of memory." and cannot save file because "insert drive and location here" because the file cannot be found. I have 4 drives each not yet half full. Two 4 gig flash drives not yet half full, The scratch disk is allocated to the least used drive.
How do I roll back PS to the previous state?
joni

I don't have CC and only have the bundle install CD. I usually save to my desktop and then transfer the file onto the flashdrive or into another drive that holds most of my artwork.
But when trying to save a psd file, no matter how many layers (1 to 5) I get the error saying that it cannot save to "e:\user\joni\ etc etc because the file cannot be found" I am just not understanding that error. Although the place I am trying to save to would be the desktop or my secondary drive (not a flash drive but I did try a few time to see if it would even allow it to save there)
How much memory (ram) is needed to allocate to PS in order to operate without having issues?
A month before this new update, we separated the page file system and increased the virtual memory as described in this adobe forum by an expert. Now that seems to be all for nothing! *gaaahhh!!!*
If I must do reinstall, must I deactive the products first before I uninstall them?
Joni

Error when compiling invalid object XLA_00555_AAD_C_011117_PKG

Hello folks,
i am getting error when compiling the following object.
XLA_00555_AAD_C_011117_PKG
here i have mentioned below is what i have done for that invalid object.
SQL> select owner,object_name,object_type
2 from dba_objects
3 where status='INVALID';
OWNER
OBJECT_NAME
OBJECT_TYPE
APPS
XLA_00555_AAD_C_011117_PKG
PACKAGE BODY
SQL> connect apps/apps
Connected.
SQL> alter package XLA_00555_AAD_C_011117_PKG compile body;
Warning: Package Body altered with compilation errors.
SQL> show errors;
Errors for PACKAGE BODY XLA_00555_AAD_C_011117_PKG:
LINE/COL ERROR
32209/1 PLS-00103: Encountered the symbol "NVL" when expecting one of the
following:
* & - + / at mod remainder rem then <an exponent (**)> and or
|| multiset
The symbol "*" was substituted for "NVL" to continue.
32209/23 PLS-00103: Encountered the symbol "=" when expecting one of the
following:
. ( * % & - + / at mod remainder rem then <an exponent (**)>
and or ||
The symbol "* was inserted before "=" to continue.
LINE/COL ERROR
Please Provide me solution as soon as possible
Regards,
Farook

Not exactly a custom object.
XLA%AAD%PKG packages will be built dynamically by the XLA's AAD compiler. This will be used while generating the accounting entries.
This error may occur due to two reasons:
a) missing source, which is used in the setup
SELECT *
FROM xla_conditions xc
WHERE application_id = &appl_id
AND xc.source_code IS NOT NULL
AND NOT EXISTS (SELECT 1
FROM xla_sources_b xsb
WHERE xc.source_application_id = xsb.application_id
AND xc.source_type_code = xsb.source_type_code
AND xc.source_code = xsb.source_code);
b) wrong conditions in setup
SELECT application_id,amb_context_code,entity_code,event_class_code
,accounting_line_type_code,accounting_line_code
,segment_rule_detail_id,description_prio_id
FROM xla_conditions xc
WHERE application_id = &appl_id
GROUP BY application_id,amb_context_code,entity_code,event_class_code
,accounting_line_type_code,accounting_line_code
,segment_rule_detail_id,description_prio_id
HAVING COUNT(*) > 1
AND SUM(NVL2(source_code,1,0)) <> SUM(NVL2(logical_operator_code,1,0)) + 1;
For (a) check any patch available for the missing source. Otherwise contact Oracle Support.
For (b) check the condition of the JLT / JED / ADR, whether anything is wrongly entered.
By
Vamsi

Another two errors in compiling StoreFrontService?

Similar Messages

Maybe you are looking for