Any captions containing variables are blank upon publish - only on my machine

Hi,
Just wondered if anyone has encountered this one. I've used variables to tell a user how many items they performed incorrectly (using $$VariableName$$--see attachments). Upon previewing and publishing on my machine only, I get a completely blank caption. I spent three hours redoing and redoing the variables only to send it to my boss and him question what the heck I was talking about. He saw all of my variables show up just fine.
I tried everything I can think of, viewing in IE and Firefox, published for several versions of Flash (I'm running the most up-to-date version). While it's not a deal breaker, I would like to be able to check to make sure my programming works before I send it to my boss....
Thanks,
--jessica

This sounds to me like the 'Rudy' directory is your original 'M' directory. I'm guessing that when you logged on OSX requires a user's home directory to carry the same name as the account it relates to; it couldn't find the 'M' directory so it created a blank one.
I would expect that if you rename the new "M" directory to "M_Blank" or similar, then rename "Rudy" to "M". Log-out and back in again, all will be as before.
Before you do this I would like someone to confirm that the problem doesn't go any deeper. However, that's what I would do, then change the user account name in the correct way using account management.

Similar Messages

  • Queue alerts container variables are not getting filled

    Hi All,
    I am referring this blog to create alerts when message struck in queues
    /people/santhosh.kumarv/blog/2009/05/19/sap-xipi-alerts-for-queue-errors
    I am able to get the alert when a message struck in Queue of XI. But Container variables are not filled with actual run time values
    I have used the report as it is and container variables as described in blog.
    I have implemented Alerts for IE & AE alerts, those are looks good as expected.
    Please let me know any clue
    Regards

    Hi,
    After investigating all the things i found these
    1) We have already Integration Engine & Adapter Engine Alerts configured in landscape with separate alert categories & working fine
    2) Now i configured one more alert category for Queue error with the above mentioned Blog
    Important thing: is even though if any error occurred on Integration engine, i get 2 alerts. one with Integration Engine alert category description  & one more is with Queue alert category description
    Reason for this is, for Queue alert category i selected radio button as "No Restriction". because of this if any IE error occurred also queue alert category is also triggering along with Integration engine alert category .
    Please let me know is it possible to implement Queue alerts along with the IE & AE type alert categories
    Any one implemented IE, AE & Queue alerts in single landscape
    Regards
    vamsi
    Edited by: Vamsi Krishna on Jul 19, 2010 4:53 PM

  • Why Doesn't Firefox 34.0.5 Render Any Web Pages - All Are Blank White

    I am using Firefox on on W7-SP1 computer and three W8.1 computers
    I upgraded to 34.0.5 from 33.1.1. None of the pages on any website render. All pages are just blank white. The Yoono sidebard works. Popup message from Firefox shows..
    Steps I took to try and solve problem
    1. Disabled all extensions - Did not solve problem
    2. Did an uninstall and clean install - Did not solve problem
    3. Turned off Web Protection in Bitdefender Internet Sececurity 2015 - Did no solve problem
    4. Turned off Web Protection in Malwarebytes 2.03 - Did not work
    5. Turned off Protection in Malwarebyes Anti-Exploit - Did not work
    I am also using Malwarebytes

    Hey,
    I really hope I can help some of you poor ones who have that problem because I had it, too! Right after upgrading to Version 34.0.5, no webpages displayed any content but a blank. It annoyed me very much, especially since it's hard to get an earlier Firefox version and seemingly impossible to downgrade. What helped me in the end was:
    Disabling one of my add-ons, namely "Privacy Defense".
    I had to find out what caused the trouble. So I went to reset my Firefox to the original settings, thereby getting rid of all my add-ons. Webpages were working normally as before. I re-downloaded my old add-ons. Everything worked fine. Until I got to "privacy defense" which doesn't even require a restart of Firefox. When I had downloaded it, no webpages would look any other than blank! So I disabled it - and everything was back to normal. So:
    Tools > add-ons > guilty add-on (for me Privacy Defense) > disable it.
    It seems as though certain add-ons aren't compatible with this new Firefox version. So check them. (Also, my contrast settings, colours and fonts I had chosen weren't the problem.)
    Really hope this helps someone.
    Good luck!

  • Emails containing pictures are blank when I forward them

    When I receive emails including pictures/photos, when I forward these on the recipient is not getting pictures. All my plug ins are up to date.

    Firefox doesn't do email. What are you using for email?
    If you are using a webmail site, thru Firefox ...
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Container Variable in Alert Cat

    Hi,
    I have a FTP To FTP scenario, where I have to handle alerts if any error occurs in PI. For Example FTP Password is changed in the Target system and not updated in the Receiver Channel. Obviously the Adapter throws an error saying the Password is wrong.
    My motto is to send an alert mail to External ID with the details of the Error occurred in the XI and the name of the file for which this error occurred.
    As the Container Variable are limited in the Alert Category, how can I catch the file name for which the error occurred.
    Could some throw light on it.
    Thanks
    Azias

    You can use this link to see How to raise Alerts with variables from the messages payload XI:
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    USE THE FOLLOWING UDF TO GET THE VALUE OF THE SOURCE FILENAME AND STORE THE VALUE OF THIS SOURCE FILENAME IN AN EXPORT PARAMETER NAMED "exportParam" declared under the Signature tab of message mapping:
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    GlobalContainer gc = container.getGlobalContainer();
    OutputParameters params= gc.getOutputParameters();
    if(params.exists("exportParam") == true)
              params.setString("exportParam", ourSourceFileName);
    return ourSourceFileName;
    Then use the value of this export parameter exportParam to raise an alert in BPM control step where you can easily use the value of this parameter in the short or long text of alert.
    For this, you need to create a container variable in BPM of category SimpleType and Type as xsd:string  with some name say "param".
    Then in the alert text, you can make use of this parameter as &param& to get its value in alert short or long  text.
    Thanks
    Biswajit
    Edited by: 007biswa on Feb 12, 2011 11:07 AM

  • Alert Configuration: SMTP Error in SOST, Container variables not filling.

    Hi All,
    I have been configured in XI System following sdn and Michal's blog.ALRTCATDEF,SCOT settings have been done and  When i try to test the alerts , alerts are reaching alert inbox but not to mail. And also in alert long text container variables are missing  I have been requested my basis team to implement sap note 835031. What exact cause for this could any body explain me. And also Please suggest me what has to be done when i get error in SOST 'Message cannot be transferred to node SMTP due to connection error (final) ' Do i have to follow steps mentiond in below link:
    http://forums.sdn.sap.com/thread.jspa?threadID=558231
    Thanks,
    Aparna.

    'Message cannot be transferred to node SMTP due to connection error (final)
    have you seen below threads:
    http://forums.sdn.sap.com/thread.jspa?threadID=1564087
    http://forums.sdn.sap.com/thread.jspa?threadID=567171

  • Container Variables Not Filled

    Hi,
    I have configured Alert Category and Alert Rules to trigger exceptions at Mapping, Adapter and Proxy level.  All these alerts are getting triggered properly.  But the container variable, &SXMS_FROM_SERVICE& is not getting populated and displays the tag as such.
    I infact checked the Note 947738 (Container Element not filled).  But this is for SP 09.  We are in Release 7.0 SP 11.  So the note is already implemented.
    But still I am facing this problem.  The container variables are not filled.  Can someone suggest how to fix this.
    Regards.
    Bala

    Hi,
    Are all the other Container Variables being populated?
    If yes, one option is to check note : 913858 . This note describes one question when the From Interface Container variable does not fill up. Check what it mentions.
    Regards
    Bhavesh

  • Workbook does not contain any input-ready variables

    Hello Experts,
    We have one workbook which is not reacting when click on REFRESH or SHOW VARIABLE.
    If clicked on VARIABLE screen it is throwing error "The workbook does not contain any input-ready variables" (screenshot attached)
    Points I have checked are as below
    1. If I create a new workbook by executing the respective query and refresh then it is working.
    2. The file is in xls format and I have checked the USE XLS format under Global setting.
    3. My Excel version is 2010. SAP version is SAPKW70105. BEx 7.X, support package 8.
    4. It is not authorization issue otherwise the issue would have happened for the new workbook I created for testing.
    5. Also I tested with user ID with SAP ALL access.
    is there any way to repair the workbook so that it respond to Variable and refresh options ?
    Thanks,
    Gopi R

    Work book might be corrupted  : As other said need to create / Recover Old work book
    Refer Below  Doc  process For   recovering a  corrupted workbook :
    How to recover a corrupt workbook.

  • Publish to Handout - slide images are blank

    My apologies if this is a duplicate post, however the search options never return any results for me.
    In CP5, Publish to handouts the resulting Word 2010 document the slide thumbnail images are all blank.  Anything I can look at to try to solve this?
    I've included publish options and output results images.
    Thank you for your help. Donna

    Hi,
    What are the objects that are present on the slide, and not displayed in handout?
    Also, sometimes it takes few seconds for the page to get refreshed. Just try clicking on the rectangles (Slide Image) and see whether the objects appears or not.
    Thanks,
    Vikranth.

  • Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?

    Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?
    Solved!
    Go to Solution.

    Chuck72352,
    Hello! It is my understanding that you need to add the individual files to the Source Code Control along with the .lvproj file.
    Here is a great deal of information on Source Code Control Practices in LabVIEW.
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • In my iPhoto library, only some images appear as thumbnails.  The rest are blank but appear briefly when scrolling through or properly when double clicked.  Any ideas?

    In my iPhoto library, only some images appear as thumbnails.  The rest are blank but appear briefly when scrolling through or properly when double clicked.  Any ideas?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Upgraded to 5.0.1 and now all keynotes are blank. Any ideas please?

    I just upgraded to iWork 09 and then as software update instructed, upgraded to 5.0.1..
    Now any new keynote or any old keynote file opens, shows the slides in the slide organiser on the left but the main slide window is completely blank.
    I drag a picture in, nothing, blank. I edit some type and change colours... nothing.
    Any old keynote I open has the slides there, I can export as powerpoint, pdf or anything else, but cannot edit in main window as there is nothing there.
    No theme data is there. Slides are blank. Even applying a theme retrospectively has no effect.
    I have repaired permissions, nothing particularly doing.
    No change.
    I am now stuck. I can try reinstalling, but I was wondering if anyone else has had this problem?
    Kind regards
    Joel

    I have solved my own problem here. This might be of use if anyone has a similar problem.
    Removed the Application support files and the Application folder for iWork 09.
    Re-installed iWork 09
    Tested to see if the slides now work
    They do.
    Re-applied the upgrades to 5.0.1
    Tested
    Works

  • I am new to Photoshop 12. The online video tutorials are blank and will not run, any suggestions?

    I am new to photoshop 12.  The online tutorial vidios are blank and do not run.  Any suggestions?

    Go to tv.adobe.com or youtube (look for the adobe channel).

  • I needed memory to upgrade so I exported all of my iphoto to an external hard drive. The photos are fine but the videos are blank. I emptied the trash. Is there any way to recover the videos?

    I needed memory to upgrade so I exported all of my iphoto to an external hard drive. I then deleted and emptied the trash. The photos are fine but the videos are blank. Is there any way to recover the videos? Any software recovery programs apple supported?

    no official way but if you open the Apple TV and put the hd in the external case it should mount and give you access to the data on it

  • Images are blanked out when forwarding a message....any fix?

    When I forward a message with Thunderbird 3.0.6, the images are blank with a red icon in the top left corner. The message is being sent as HTML and Text.

    Thunderbird support is over here.
    [http://www.mozillamessaging.com/en-US/support/]
    or here:
    http://forums.mozillazine.org/viewforum.php?f=39

Maybe you are looking for