Any changes in PA30 need to send a mail to the Managers outlook inbox

Hi,
Any changes in PA30 (ESS) need to send a mail to the Managers outlook inbox  .
Kindly let me know the Standard workflow template and  to built the Custom function module in Rule .
Thanks in advance,
Richard A

<i>Any changes in PA30 (ESS) need to send a mail to the Managers outlook inbox</i>
If its just an email do u need a workflow for it? Configure dynamic actions which will call a subroutine when a change is made to the infotype and send email from that subroutine using SO_NEW_DOCUMENT_SEND_API1.(you can include the necessary logic for determining the approver in the same subroutine).
Thanks,
Prasath N

Similar Messages

  • Need to send Automatic mails when the report successful or Fail.

    Hello Experts,
    Created one report for reconciliation to check BW and R/3 figures.
    There are exceptions designed using reporting Agent settings on the same report.
    (When the values from R/3 to BW are matching it shows Green color and if the values are not matching report shows red color in the columns.)
    There are some mandatory variables for Company code, Period and Currency Type.
    Selections for  Company code and Period are fixed but We have three currency types (00,10,30)
    Reports needs to be executed for three currency types.
    Requirement is that
    when the report is executed for One currency type  (Ex u2013 00)
    If the key figure column shows Green color , Immediately mail has to be sent to necessary mail IDs saying the status successful.
    If the key figure column shows Red color , Immediately mail has to be sent to necessary mail IDs saying the status Failed.
    Like this the same report has to be executed for other two currency types and send the the same status as above phenomenon.
    Sending mails can be taken care by BASIS people with SMTP configuration.
    I want to know the development needs to be done from BW side.
    Are there are any settings in BW to send the message as Successful  when the report shows green color and message as failed when red color appears in the report.
    Regards,
    Siva.

    Hi,
    As i understand you need to set up an alert framework.
    Please check :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b6d59590-0201-0010-5f9d-adb9f6b14d80?quicklink=index&overridelayout=true
    This can also be achieved using BEx broadcaster
    Please check :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/efdbd593-0e01-0010-4eb1-a09ffedd550a?quicklink=index&overridelayout=true
    Hope this helps.
    -Vikram

  • Send a mail to the customer when their order of type Residential Credit is booked

    Hi,
    We need to send a mail to the customer when their order of type Residential Credit is booked.
    I followed the below steps, but i could not write the code for sending email, can you please send me a sample code.
    Step1:
    =======
    Setup Processing Constraint on Order Header/Line for order booking
    *(Navigation : Setup --> Rules --> Security --> Processing Constraints)*
    a) Set Application : Order Management, Entity : Order Header
    b) Under constraints --> set Operation : Create, user Action : Raise Integration event, and make it enabled
    c) Condition --> Set Scope : Any, Validation Entity : Order header, record Set : Order, Validation Template : Booked and make it enabled too.
    Step2:
    ========
    Profile Option: Set "OM: Electronic Message Integration Event Sources" to be set to All
    Step3:
    ========
    Develop a code(Package) /workflow as per business requirement. e.g sending mail to customer when order is booked.
    Step 4:
    =======
    Open business event *"oracle.apps.ont.oi.xml_int.status"* through workflow Administrator responsibility. Include code/workflow in the subscription section of Business event.
    Navigation : WF Administrator Web application ---> Administrator Workflow --> Business Events
    Search Name : oracle.apps.ont.oi.xml_int.status, it will return 1 record, click on subcription...
    In this page include the function e.g CLN_CH_EVENT_SUBSCRIPTION_PKG.ADD_COLLABORATION_EVENT_SUB, if you are using WF, mention (e.g) wf_rule.default_rule in function & Workflow as OEEM/WRITE_HISTORY and enable it in this page..
    Thanks and Regards,
    Priya

    Just wanted to let you guys know that I still haven't received my MP3 player... Creative has had the MP3 player for 73 days now and they still haven't sent it back. Since last time I wrote here I got an e-mail from Creative saying they got the MP3 player on the 5th of the November and that somehow the status wasn't updated. Well, it's been 73 days now, care to send it away? I sent them and e-mail yesterday where I wrote that they could just send me the cash for it or a new MP3 player.
    If I don't receive my MP3 player in a near future I will contact "Allm?nna Reklamations N?mnden" (a Swedish "Consumerist"-like government sponsored organization that deals with people vs company legal cases).
    Again, I strongly advise everyone to not buy any more Creative products. Once they break you won't get the help you need.

  • Personal data change in PORTAL (PA30) - need to send mail notification

    Hi,
    When there is any change in personal data on PORTAL need to send a mail notification to the respective agents. I was able to design the workflow in such a way that , whenever there is any change in the personal data (Ex. Marital status) it trigger an event and workflow starts, inturn it send mail to external system and sap Userid.
    The question is ?
    1. If the personal data is changed from the portal , does it trigger the same event in the backend ? does 
        it  start my workflow?
    Thanks!
    Richard A

    Hello Richard,
    In my opinion same event is triggered. You can check it in transaction SWEL.
    Please have a look at the following threads more more detailed information,
    Workflow is not trigerred from the portal
    /thread/113450 [original link is broken]
    /people/alan.rickayzen/blog/2003/10/13/workflow-in-the-enterprise-portal
    Best regards,
    Abir.

  • I received an email saying that my shipping/billing address has been changed, but I didn't make any changes. I need help

    I received an email saying that my shipping/billing address has been changed, but I didn't make any changes. I need help

    Then it's likely a scam email. Just ignore it and delete it.

  • InDesign CC no longer packages fonts when I need to send a project to the printer

      Hey Adobe team: Long-time user from when Photoshop was but a sprout. I recently upgraded from Creative Suite 6 to Creative Cloud and have run into a troubling problem. InDesign CC no longer packages fonts when I need to send a project to the printer. This meant that I had to completely redo a project on deadline for a problem that I’ve never had before. How is this possibly helping your users? And is there a solution in the works or do I need to cancel Creative Cloud and go back to CS6?

    @OurPlace
    First of all, you are not addressing any Adobe team. These forums are primarily supported by volunteers who are not Adobe employees and don't officially represent Adobe Technical Support.
    That having been said ...
    There was nothing done specifically with InDesign 9 or 10 (the CC and CC 2014) versions of InDesign to change or disable packaging of fonts when packaging a document. It should be absolutely no different from InDesign 8 (the CS6 version).
    Troubleshooting hints:
    (1)     Make sure you check the Copy Fonts (Except CJK and TypeKit) option in the package dialog.
    (2)     Make sure that you are not using any CJK (Chinese, Japanese, and Korean) complex fonts that we specifically will never put into a package.
    (3)     TypeKit fonts won't package.
    (4)     Make sure that your file system permissions are such that InDesign can create all the necessary directories and subdirectories for the packaging operation.
    (5)     If on MacOS, exit InDesign and try forcing a clearing of your system font cache and then reboot.
    (6)     Exit InDesign and then find and delete all files on your system with filenames of the form AdobeFnt##.lst where ## is a two digit number; don't delete any other files that start with AdobeFnt. Then reboot and restart InDesign.
    (7)     Reset InDesign's preferences that may have become corrupted. For Windows, start InDesign, and then press Shift+Ctrl+Alt. Click Yes when asked if you want to delete preference files. For MacOS, while pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files.
    One of these should either address or resolve your problem. Again, we at Adobe are not aware of any generic issue with packing fonts with InDesign.
              - Dov

  • Need to send a mail while safty stock goes down compare with actual stock

    Dear experts,
    I Need to send a mail to concern persion while stock goes down compare with safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
    Thanks in adv,
    jayakumar.M

    Your best bet may to be place your check in the a user exit for goods movements.  The enhancement is MB_CF001, the component is EXIT_SAPLMBMB_001.
    Hope this helps,
    Mark

  • Need to send a mail while safty stock goes down

    Dear experts,
    I Need to send a mail to concern persion while stock goes down from safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
    Thanks in adv,
    jayakumar.M

    Hi Jai,
    According to my understanding,
    As soon as the stock goes down from the safety stock a mail should be triggered.
    Probable solution (in my opinion)
    create a flag in the table set it whenever the stock value goes down.
    make calculations like (safety stock as today - safety stock previous date) = 0 if not set the flag and construct a workflow withe receiver settings based on the flag field and trigger a mail to the concerned person.
    This is just my idea.
    Try it and revert
    Thanks and Regards
    Srikanth.P

  • Need an enhancement after releasing a PO Need to send a mail to vendor

    Hi all,
              I am having a requirement that, need to send a mail and attachment whenever a PO get released.
    Can anyone help to find the enhancement for to write the code to send a mail to vendor.
    Regards.
    Ranganadh.

    Hi,
    To send a mail when a new PO is created.
    can be achievd by using  class cl_bcs and BADI method
    IF_EX_ME_PROCESS_PO_CUST~POST of BADI ME_PEOCESS_PO_CUST.
    We can aslo configure the OUTPUT TYPE as MAIL in transaction NACE. This is usually doen by the Functional consultant.
    Pls look into these exapmles which clearly explains abt the process of sending a  mail-
    Sending Mail using class cl_bcs
    Re: Mail sending program
    Re: SCOT and FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • While creating Purchase Requisition we need to send a mail for approvers

    Hi All,
    While creating Purchase requisition we need to send a mail to approvers.
    Dowe  need to create Function module ?
    if You know the steps can you please give me the steps.
    Thanks In advance
    Sriman.

    Hi Sriman
    Here we can try for 2 approach
    one is workflow and other his sending emails via user exit.
    I am not much aware about workflow, but you can explore for user exit.
    Try for enhancement component 'MEREQ001'.
    let me know, if you need further help
    Regards
    MD

  • How can i reduce the pdf file size? I need to send via email, at the moment its at 10mb

    How can i reduce the pdf file size? I need to send via email, at the moment its at 10mb

    Reducing PDF file size or Optimizing PDF is the feature that is supported only by Acrobat Pro (desktop app that is not free).
    Optimizing PDFs (Acrobat Pro)
    Free Adobe Reader products (Reader XI desktop, Reader for iOS, Reader for Android, Reader Touch for Windows 8, etc) do not offer the capability.

  • Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time

    Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked. 
    Any advice?
    Thanks.
    Alex.

    Cannot figure out what your talking about since it makes no sense.
    If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
    You must log in with your cell number and your my Verizon portal password. Not the account pin.
    Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
    1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
    If you don't have the information then there is nothing they can do.
    If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
    Good Luck

  • My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

    My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
    After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
    There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
    even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
    Can you enlighten me what can I do I need to use my e-mail program urgently !!!
    Thanks for your help

    I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
    You might try defining a new SMTP server to see if that will work any better.
    By the way, the subject field for these messages isn't intended to hold a lot of text.  Put a short description of your problem in the subject field and save the rest of your message for the body field.

  • Send reminder mails to the outlook

    Hi everyone,
    I have a scenario where i have a modeled deadline branch where if the deadline is missed i am sending recursive mails to the recipients using Rule in an activity .
    In the Rule i am using FM SO_NEW_DOCUMENT_ATT_SEND_API1 for sending mails . I need to send mails 3 times for every 5 mins . for that i have created a requested start deadline with time as 5 min .
    and a workflow element status with initial value as 0 . and  in the same branch i have used a container operation step where i am incrementing my status value by 1.
    and loop until condition is set to &status& = 3.
    i am receiving the reminder mail only once in my outlook and the status is set to 1.
    it is not getting incremented again . and hence no second reminder mails are coming in my outlook.
    Can any one please help .?
    Thanks !!

    I need to send mails 3 times for every 5 mins . for that
    i have created a requested start deadline with time as 5 min .
    I assume you have desigened the workflow template as below.
    1. A dialog step where the workitem will be sent for apprval.
    2. For the above dialog step you have defined both Requested start and Latest end of Modelled Deadline .
    3. In the newly generated branch you have inserted a loop and inside a loop you have defined a step to send mails. End condition for the loop is COUNT = 3.
    IF the case is like above then you modify the workflow design as below.
    1. Instead of inserting a loop in the deadline brach , you define it outside the deadline branch.
    2. Both Dialog workitem and deadline brach and its step must be included inside one loop.
    3. Now for the whole loop you deifine a condition in a such a way that the workitem should not miss the deadline and it should be in the completed status then only you will end the whole loop other wise you keep on looping it .
    I hope if you remodify the workflow as above i hope it works...

  • How to create  a procedure to send a mail if the Database is down?

    Hi,
    I have created the below procedure to send a mail if the count is less than 1300. It scheduled daily @ 15 30 hrs. Its fine.
    CREATE OR REPLACE procedure SCOTT.hrsmail
    is
    v_count number;
    begin
    Select count(*) into v_count from emp;
    if v_count < 1300
    then
    UTL_MAIL.send(sender => '[email protected]',
    recipients => '[email protected]',
    cc => '[email protected]',
    bcc => '[email protected]',
    subject => 'Testing the UTL_MAIL Package',
    message => 'If you get this, UTL_MAIL package
    else
    null; --what you want to do here
    end if ;
    end;
    Sometime the Database is down, so the job is not running.
    How to create a procedure to send a mail if the database is down?
    Pls help me. Its highly appreciated.
    Thanks
    Nihar

    nihar wrote:
    How to create a procedure to send a mail if the database is down?And what if the database is up, but the network down? Or the database up and mail server down? Or mail server undergoing maintenance?
    There are loads of "+What if's+" - and in that respect, playing "+What if database is down..+" in this case does not make any sense. You do not use the database to monitor its own up/down status. You do not rely just on SMTP as notification protocol that the database is down.
    The correct approach would be using something like SNMP as the monitoring protocol. A monitoring system that can process SNMP and perform some basic root cause analysis (e.g. network to the database server down, database server status unknown). And this system supporting notification methods like SMTP, SMS and so on.

Maybe you are looking for