Any changes in the condition value then system should trigger a mail.

Hello Experts,
I have below requirement
If user does any changes (increase the price /decrease the price) in the condition value then system should trigger a mail and goes for approval.
How i can achieve this ?
Thanks

Hi
In that case again you can use MV45AFZZ program and USEREXIT_PRICING_PREPARE_TKOMP. If this exit didnt work you can try in other save or prepare to save exits in this same program. For order statuses and authorization you can use status profile and control authorization through an authorization object. For email use email sending function and users will receive an email whenever some specific condition value is changed.
This will be ABAP coding in above mentioned program using implicit enhancement. There is no standard solution for this and you have to go for customization.
Thank$

Similar Messages

Pricing procedure change the condition value

Hi,
My pricing procedure determines the Tax in %basis.Now i have a rewuirement wherein i should be able to enter the amount in AMOUNT COLOUMN in condition tab. This value should be the condition Value for the condition type.
Now my pricing procedure doesnt allow me to make any changes and the condition type is greyed out. how can i calulate the tax in amount instead of % and be able to enter the value manually?
Thanks,
Challa

Hi Challa,
Price can be maintained either on percentage basis or on amount basis.
So you have to make changes in condition type to convert it from percentage to amount.
Go to IMG u2013 sales and distribution u2013 master data u2013 basic function u2013 pricing u2013 pricing control u2013 define condition type.
Select maintain condition type from the options.
Now select your condition type and click on detail.
Change the calculation type from A (percentage) to B (Fixed amount) and save it.
Now go to VK11 and maintain the new condition record for that condition type.
Now create the sales order and go to condition tab and check out the pricing it will be amount.
Please do this method if you find any difficulty then tell us.
Regards
Raj.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Fm to change the condition value in sales order pricing

Hi Friends,
I need a FM to change the Pricing value that is auto calculated in the sales order. It needs to be overwritten. BAPI_SALESORDER_CHANGE I don't think will do it. It can be used only to update the condition type and the condition amount but not the condition value.
Can someone please help me. I've been stuck with this for quite sometime.
Thanks,
Dikshitha G

Try these BAPI's
BAPI_LISTING_CONDITIONS,
BAPI_AGREEMENTS
Regards,
Rajasekhar Reddy.

Problem changing the Condition Value in Po using BAPI_PO_CHANGE

Hi Experts,
My issue is BAPI_PO_CHANGE is not changing the Condition value. and giving message in bapi return as 'cannot be processed manually'.
Can anybody please help me on this.
Thanks & Regards,
Sudheer

Check this link http://forums.sdn.sap.com/thread.jspa?threadID=652278
Regards,

Changing the Condition value in Quatation only and not in Order

Hi Gurus,
We have a Requirement from Client in which the Client should be Able to change the condition Value PR00 in the Quotation and not in Sales order......can someone please let me know how's that possible?
Because if we try to make Changes in Condition Type in V/06 it will also allow changes in Sales Order....

Hi
You can use user-exit USEREXIT_PRICING_PREPARE_TKOMP in the include MV45AFZZ.
IF VBAK-AUART = (Your quotation type)
LOOP AT XKOMV.
IF XKOMV-KSCHL = 'PR00'.
SELECT * FROM T685A INTO TABLE I_T685A WHERE KSCHL = 'PR00'.
READ TABLE I_T685A WITH KEY KSCHL = XKOMV-KSCHL.
I_T685A-KMANU = 'C'.
MODIFY I_T685A INDEX SY-TABIX.
MODIFY T685A FROM TABLE I_T685A.
REFRESH I_T685A.
ENDIF.
ENDLOOP.
like this discuss with your abapper and build the logic
regards
Prashanth

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
Thanks in advance.

1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
2. No; if you use an emulator, it may install system components. Back it up anyway.
(110033)

How to query the condition value in VPRS

Hello all,
we provide the sales price to customers based on the condition value in "VPRS" ,because I have thousands of goods need the price,so I 'd like to make a query to extract the condition value in "VPRS".
which table is refer to this?
https://mnlylq.bay.livefilestore.com/y1mXNdIiY7VgiU1v3ymS71pxZluGxj4YNp4IFsyQEr1zkoxjm1VCsxpOgbBQ1-ucxiRtA9tC7O_3ZPaQa7qWKGbdnHNX8UzazWTlettENIO7iujggSx7vHjc2bvuIqhYFYb2DEgIjuNaJ5foKU_xF7wvA/%E5%9B%BE%E5%85%AD.jpg?psid
Thanks,
helai

hi,
For your Item category, if you check DETERMINE COST
Determine cost
Indicates whether, during pricing, the system determines the cost (stock value) of a sales document item.
Use
The system checks the cost determination indicator as a requirement before applying the condition type that calculates the cost (condition type VPRS in the standard version of R/3 1.1)
Mainatin VPRS as D then it will automatically pull the price from Material master if maintained
IF VPRS is getting determined, then in your pricing procedure, you can add markup (multiplier)

How to select values frm table giving the condition value at runtime in SQL

Hi All,
How to select values from a table by giving the condition value at runtime in SQL
My SQL statement is select * from employee where empno=<empno>, this empno I want to provide at run time. Also I don't have any bind variables defined. Can anyone please tell how can I achieve this. Also do I have to write a SQL or pl/sql statement.

Hi Roshni Shankar,
You can use substitution variable in case of SQL.
SQL> select * from employees where emplployee_id = &emp_id;
Enter value for emp_id: 100
old   1: select * from employees where emplployee_id = &emp_id
new   1: select * from employees where emplployee_id = 100If you want to put condition on varchar values then eighter provide values in single quotes or use single quote for substitution variable.
SQL> select * from employees where last_name = &emp_name;
Enter value for emp_name: 'King'
old   1: select * from employees where last_name = &emp_name
new   1: select * from employees where last_name = 'King'
no rows selected
SQL> select * from employees where last_name = '&e_name';
Enter value for e_name: King
old   1: select * from employees where last_name = '&e_name'
new   1: select * from employees where last_name = 'King'In case of pl/sql you can pass values to procedure and you can use those values at run time.
create or replace procedure test (p_emp_id number)
as
   v_last_name      varchar2(100);
begin
   select last_name
   into    v_last_name
   from employees
   where employee_id = p_emp_id;
   dbms_output.put_line(p_emp_id ||'    ->    '||v_last_name);
end;
show errors
SQL>exec test(100);
SQL>exec test(101);Edited by: Gaurav Bhide on Oct 29, 2012 4:07 AM

Reset Release Strategy for any change in the Purchase Order

Hi,
Is it possible in SAP standards to reset release strategy for even minor changes in the Purchase Order irrespective of whether it is value change or any change in the text or Purchasing group change or whatever it is?
If so, where do we need to make the configurations.
I have seen in some thread about resetting the release strategy for decrease in Purchase Order value.Even that was possible through some BAPI.
Thanks in Advance.
S.Raghavan

hi sandesh,
sorry, i know it's too late.
i tried your suggestion, it works blocking the purchase order after release strategies are setted.
sandesh, raghavan:
i need to reset the strategies after to make any change in the po. i'll appreciate your help if you can give it.
regards
f

Which table stores the condition values of a purchase order line item?

Hi,
Please let me know the table that stores the condition values of purchase order line items(when we click on conditions tab after selecting an item then we can see the condition types and there is a corresponding condition value for that condition type.
My requirement is to get the actual price for a purchase order line item(it can be seen in the last line and it is calculated after considering all the condition types) and display this value in a custom report.
Thanks,
Ravindra

Hi Ravindra
You can find the conditions data for PO in TAble KONV.
KONV-KSCH is the condition type
KONV-KWERT is the cond value
KONV-KNUMH is the condition doc no. which is there in EKKO field KNUMH.
So u have to make a link between KONV-KNUMH and EKKO-KNUMH.
Thanks
Vijeta

Why should I recompile report for any changes in the database ?

Hi All
I call a report (.rep) from a form using RUN_REPORT_OBJECT, and everything is OK
For any change in the database, for example :
1- Export Dump file for the schema.
2- Drop the schema
3- Re-create the schema again
4-Import the taken dump to the schema
When i call the report again, the report doesn't run. If i recompile the report again it will work.
I read too much posts about this issue, most of them are taLking about the command line parameter RECURSIVE_LOAD=NO ,
v_url :=' COMPANY_NO='||:global.company_no|| ' RECURSIVE_LOAD=NO';
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,v_url);
But , Still the problem not solved
Notes :
1- The report type is .REP
2- if I used the .JSP report, it is working fine , But i can't copy the source code for the report at the customer side.
Please Help

Well, first of all this would not be the correct forum. There is a dedicated reports forum for reports related questions. And secondly this most certainly depends on your report. If you have a query like
select * from my_tableor e.g. are using %rowtype records in your report then you most certainly will have to recompile it after you do an exp/imp.
cheers

Only query on existing form without any changes on the existing records?

Dear all,
I am working a brand new form. The form is able to query all the records from the table. However, when I leave the form, it will ask me "Do you want to save the changes you have made?" everytime. I didn't make any changes on the existing records.
My form only has 2 fields (one with LOV and one without).
Does anyone know what went wrong?
Thanks.

How do you populate your datablock? Do you query one of your values in a Post-Query trigger?
However you are populating your datablock, Forms is detecting that the status of the Form, Block or Record is changing.
Also, please let us know your Forms version.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

The Condition value formula is not found in CRM ???

Hello Al
l
We are working on CRM 7.0 , I canu2019t find the Condition Value Formula, Condition Base Formula and Condition u201Crequirementsu201D in the pricing procedures downloaded from the ECC also in the pricing procedures that are standard in the CRM
I donu2019t know what is the reason for that
Regards
Jacopo Françoise

the IPC should work to make them available

How to fetch the condition value per line item in PO o/p

Dear Experts ,
I need to fetch the value of the all valid condition types in the PO item , for its o/p .
For this i should know
1.what all are the condition types involved in the item .
2.what is the condition rate
3. what is the condition value .
Pleas etell me how do i fetch this data ??
Thanks in advance
Regards
Anis

Hi Anis,
At first collect the doc.condition-KNUMV from EKKO table.
Later enter the above doc.condition no in KONV and KONP to get the details.
Regards
Ramesh Ch

Any changes in the condition value then system should trigger a mail.

Similar Messages

Maybe you are looking for