Any tutorial for performing manual CRUD beside ADF faces and ADF BC ?

Hi
Thank you for reading my post
is there any tutorial around which help me learn how to perform manual CRUD beside ADF BC ?
in my application i have some complex DB operation which i need to perform them manually.
an example is my login page :
user enter user name and password and i should check it with database and after i checked that its correct then i can set session attributes that user is loged in.
now the question is : how i perform that check for user name and password , does ADF-BC helps or i should get the connection and create an statement ...
thanks

Hi!
You can do that with bind variables. Perhaps this thread will help you:
Re: SQL statement problem!!
Claus

Similar Messages

Any tutorial for building adapters and routing services for JBI container ?

Hi
Thank you for reading my post
is there any tutorial for Sun JBI container ?
I want to know how i can build/deploy JBI components like adapters and routing service for Sun JBI container .
another question is that , is it based on OpenESB ?
thanks

You can find a white paper on writing a JBI service engine here:
http://java.sun.com/integration/reference/techart/DevelopingAServiceEngineComponent-1-2.pdf
Also, there is a lot of information on JBI and Open ESB here:
http://java.sun.com/integration/
You ask if the Sun JBI container is based on Open ESB - it's actually the other way around: Open ESB is based on the Sun JBI container. The JBI container is a JSR208-compliant implementation, and Open ESB builds upon that implementation to add full ESB capabilities.
hope this helps -
mark

Is there any tutorial for using ARM cortex-A processors of Zynq for digital signal processing ?

Hello, everyone.
Is there any tutorial for using ARM cortex-A processors(such as A9 and A53) of Zynq to deal with digital signal processing problems?
Please tell me , thanks.

Hi
Check below links
http://www.xilinx.com/training/zynq/software-acceleration-for-dsp-functions-with-zynq.htm
https://www.youtube.com/watch?v=ErEG7ZREcJQ
http://www.xilinx.com/support/documentation/application_notes/xapp1170-zynq-hls.pdf
http://www.xilinx.com/support/documentation/application_notes/xapp890-zynq-sobel-vivado-hls.pdf
http://www.xilinx.com/support/documentation/application_notes/xapp1167.pdf

Any tutorial for Live RTMP Dynamic Streaming using Strobe Media Playback?

Any tutorial for Live RTMP Dynamic Streaming using Strobe Media Playback anywhere available on the web ?

Thank you for the link but it does not solve my problem. In this thread they work with manifest xml files like a playlist. Which i tryed but also doesn´t work. Adobe declairs FMP with easy config and less code for non geeks. And this is exactly what i want for my project.
Does anybody can post some html sample code especially for dynamic streaming/ MBR wit Flash Media Playback??? For Live or On-Demand.
Best
Hinricht

Is any tutorial for mountain lion?

Is any tutorial for the mountain lion?

OS X Mountain Lion Core Technologies Overview
from
http://www.apple.com/osx/specs/

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
Please help!!

I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
Add-PSSnapin "Microsoft.SharePoint.PowerShell"
$sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
$uri = new-object System.Uri("http://url/")
$sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
$sts.Update();
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Are there any Hotkeys for Adjusting Temperature in Lightroom, similar to + and - for exposure?

Are there any Hotkeys for Adjusting Temperature in Lightroom, similar to + and - for exposure?

If you click on the word Temperature, then + and – will adjust the temperature up and down, respectively.
Note: whenever you click on another slider name, like Exposure, then the + and – new work on the slider name you just clicked on

ADF Faces with ADF BC

Hi everyone,
I'm trying to map a <af:table> to an ADF Business Component. I can retrieve the records and I can also navigate doing Next and Previous, but I cannot do a Delete of a record. Do you know if there's any kind of "work arround" to use ADF Faces with ADF BC to do a delete or update, etc.?
Here is the code, you can notice the: <af:tableSelectOne> tag to put the radio buttons colums to select which one to delete, and you can also notice the action="#{row.markForDeletion}" for the commandbutton to perform the delete.
Jonas Jacobi wrote in his web blog on August 16 that he was going to post some samples for this "work arround" but I think he never posted them.
Here is the code:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/EA12/html" prefix="afh"%><%@ taglib uri="http://java.sun.com/jstl/core" prefix="c"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/ui/jsp/adftags" prefix="adf"%>
<adf:uimodelreference model="table_testUIModel"/>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/EA12" prefix="af"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<H1>This is a Test</H1>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>my test page</title>
<link href="css/blaf.css" rel="stylesheet" media="screen"/>
</head>
<body>
<f:view>
<afh:head title="tableSelectOne Demo"/>
<af:panelPage>
<af:table rows="3" var="row" value="#{bindings.CmSvcView1.rangeSet}" first="0">
<f:facet name="selection">
<af:tableSelectOne text="Select and ...">
<af:commandButton text="Delete" action="#{row.markForDeletion}"/>
</af:tableSelectOne>
</f:facet>
<af:column>
<f:facet name="header">
<af:outputText value="SvcId"/>
</f:facet>
<af:outputText value="#{row.SvcId}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="SvcNum"/>
</f:facet>
<af:outputText value="#{row.SvcNum}" styleClass="OraHeaderSubSub"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="SvcName"/>
</f:facet>
<af:outputText value="#{row.SvcName}" styleClass="OraHeaderSubSub"/>
</af:column>
</af:table>
</af:panelPage>
</f:view>
</body>
</html>
Thanks,
Pablo (sorry for the long post)

Thank you Gabrielle. At least now I have an excuse to tell my boss why I can't get it to work.
Any idea when it may be available? Would it be a better idea to implement the table in plain vanilla JSF, and when ADF Faces is ready for ADF BC then do the migration?
Are there any workarround to this problem?
Thank you for your time,
Pablo

Help required building ADF-Swing/ADF-Faces using ADF Business Components

My question is in regards to how you can go about building a light swing application to an ADF model?
In particular if I were to say that we were developing a 3-tier project whereby we had a database tier, a series of EJB-ADF façade session beans to the database (middle-tier), and a swing client communicating with the session beans (view-controller tier), how would you go about developing these screens?
In particular can we develop these screens using ADF-Faces and also ADF-Swing?
The EJB session façade beans of course are ADF app modules with customised methods. The methods would return back customised DTO objects. These DTO objects are wrappers to row objects ADF would create. This would be mainly due to making these facade beans web service enabled (Oracle state that these methods cannot return oracle.jbo objects if they are to be web service enabled).
This would be typically deployed to an app server, like Oracle App Server 10G.
Could you please have a look at this, as I am doing a lot of research into this.
eg. Taking example from oracle magazine sept/oct 2006
with slight enhancements
package oramag.frameworks.example.common;
import oracle.jbo.ApplicationModule;
import oramag.frameworks.customdto.EmployeeDTO;
public interface HRService extends ApplicationModule {
void deleteCurrentEmpAndCommit();
EmployeeDTO findEmployee(int employeeId); // new method
import oramag.frameworks.customdto.EmployeeDTO;
public class HRServiceImpl extends ApplicationModuleImpl {
public void deleteCurrentEmpAndCommit() {
Row empRow = getEmpView().getCurrentRow();
if (empRow != null) {
empRow.remove();
getDBTransaction().commit();
public EmployeeDTO findEmployee(int employeeId)() {
EmployeeDTO employeeDTO = null;
EmployeesImpl employees = getEmployees();
employees.setNamedWhereClauseParam("EmployeeId", employeeId);
employees.executeQuery();
if(employees.hasNext()) {
EmployeesRowImpl employee = (EmployeesRowImpl)employees.next();
employeeDTO = new EmployeeDTO(employee);
return employeeDTO;
public EmployeesImpl getEmployees() {
return (EmployeesImpl)findViewObject("Employees");
Now given the above code snippet, how could you turn this into an ADF-Swing/ADF Faces application so that if a user using the swing application enters an employee id, then the application will execute the query on the app server, the app server in turn returns the results to the client, and the client finally display the results. Typical MVC example.
Cheers
Rodney

The tutorial is for ADF BC used with JavaServer Faces.
While the tutorial doesn't cover it, we also support drag and drop development for Swing and visual WYSIWYG layout for Swing panels and windows, too. For a very simple example, watch screencast #4 on my blog here:
http://radio.weblogs.com/0118231/stories/2005/06/24/jdeveloperAdfScreencasts.html
One thing I have noticed is that when using ADF business components, when the app module returns a custom DTO object like the above example, it returns the data in a element structure according to the data control palette.
You don't generally ever need to create your own custom DTO's when working with ADF for use by client UI's. The only situation where can be necessary -- until we simplify this in the JDeveloper/ADF 11g release -- is when you desire to expose custom methods that can return sets/arrays of typed row structures through a web service. However, web services are not involved/required in building 3-tier Swing applications.
When dropping onto a page it does so like a string and doesnt give option to display the data in a read only form etc. Is there anything we need to do, to get the functionality.
It's more of what you don't need to do :-)
Just leverage the active data model that the ADF application module provides. You can read more about it in section 4.5 "Understanding the Active Data Model" of the ADF Developer's Guide for Forms/4GL Developers on the ADF Learning Center at http://www.oracle.com/technology/products/adf/learnadf.html). Your UI's bind to view object instances in the data model, and your UI's are automatically kept up to date without needing to write methods that return data. I short article I wrote that preceeded my writing the ADF Developer Guide content on this topis is here:
http://radio.weblogs.com/0118231/stories/2006/01/26/theAdfBusinessComponentsActiveDataModel.html
I know that when dropping a view object you get this functionality. Also was wondering if we were to pass an object of thios type back to the model it might not give us the rich functionality like input forms, like what Oracle provides if we were to drop a enitity view object.
Just use the active data model and everything becomes totally easy, with no changes required to switch between local or three-tier deployment configurations.
Trying to do everything with hand-coded DTO beans is really going the hard way.
Could you help us regarding this?

JDev 11g TP4: ADF tables and ADF form pop-ups PPR?

I was hoping somebody could help me with the following please.
I'm currently having a bit of an issue with ADF tables and ADF forms embedded in a pop-up, where the wrong record is shown in the popup. I suspect it's a PPR problem but am unsure. My scenario:
1) I have the following table:
CREATE TABLE "CHRIS_MUIR_DELETE_ME" (
"ID" NUMBER(5,0)
"SOME_COLUMN" VARCHAR2(20 BYTE)
CONSTRAINT "CHRIS_MUIR_DELETE_ME_PK" PRIMARY KEY ("ID"));2) I have a default ADF BC EO/VO combination for this table.
3) I have an ADF Faces RC page with a read-only table based on this VO:
<af:table value="#{bindings.ChrisMuirDeleteMeView.collectionModel}" var="row"
   rows="#{bindings.ChrisMuirDeleteMeView.rangeSize}"
   emptyText="#{bindings.ChrisMuirDeleteMeView.viewable ? 'No rows yet.' : 'Access Denied.'}"
   fetchSize="#{bindings.ChrisMuirDeleteMeView.rangeSize}"
   selectedRowKeys="#{bindings.ChrisMuirDeleteMeView.collectionModel.selectedRow}"
   selectionListener="#{bindings.ChrisMuirDeleteMeView.collectionModel.makeCurrent}"
   rowSelection="single" partialTriggers="myDialog">
<af:column sortProperty="Id" sortable="false"
    headerText="#{bindings.ChrisMuirDeleteMeView.hints.Id.label}">
     <af:outputText value="#{row.Id}">
        <af:convertNumber groupingUsed="false" pattern="#{bindings.ChrisMuirDeleteMeView.hints.Id.format}"/>
     </af:outputText>
</af:column>
<af:column sortProperty="SomeColumn" sortable="false"
     headerText="#{bindings.ChrisMuirDeleteMeView.hints.SomeColumn.label}">
    <af:outputText value="#{row.SomeColumn}"/>
</af:column>
</af:table>Note that rowSelection is set to "single".
3) The page also includes a popup-dialog combo that shows the same data from the table (ie. they're based on the same VO) as an ADF Input Form:
<af:popup id="myPopUp">
<af:dialog type="okCancel" id="myDialog">
     <af:panelFormLayout>
        <af:inputText value="#{bindings.Id.inputValue}"
            label="#{bindings.Id.hints.label}"
            required="#{bindings.Id.hints.mandatory}">
           <f:validator binding="#{bindings.Id.validator}"/>
           <af:convertNumber groupingUsed="false" pattern="#{bindings.Id.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.SomeColumn.inputValue}"
            label="#{bindings.SomeColumn.hints.label}"
            required="#{bindings.SomeColumn.hints.mandatory}"/>
        </af:inputText>
     </af:panelFormLayout>
</af:dialog>
</af:popup>Note that the table's partialTriggers is set to the id of the dialog. This implies on return from the dialog, the table will update itself to reflect any changes.
4) I have a data bound Create commandButton, + a simple Edit commandButton. The Edit button includes an <af:showPopupBehavior> to display the popup:
<af:commandButton
    actionListener="#{bindings.Create.execute}" text="Create"
    disabled="#{!bindings.Create.enabled}"
    partialTriggers="table1"/>
<af:commandButton text="Edit">
    <af:showPopupBehavior popupId="myPopUp"/>
</af:commandButton>If you run the form with the following steps, you can reproduce my issue:
1) Click the create button, this will create a blank record in the <af:table>
2) Click the edit button and give the 2 fields values, press ok. Note this is reflected back in the table.
3) Click the create button, you will now see another blank record in the <af:table>. Note that the current row selection highlight is on the new record.
4) In the table select the original record, then the Edit button. Oddly the input form is showing the blank record, not the original record even though we selected it in the <af:table>
This implies to me that I have to hook up a PPR event such that the fields on the popup know to update themselves when the user selects a new row in the table.
I've tried setting the partialTriggers property for the popup, dialog and individual fields on the popup page to the table id, but this doesn't seem to work.
Does anybody have any suggestions on how I'm meant to hook up the partialTriggers in this case? I'm at a bit of a loss to know what to do to solve this issue. Is it possible the table selectionListener isn't working?
Thanks for your help in advance.
Regards,
CM.

G'day gang
This morning I had a chance to play with Pavle's suggestions, specifically the popup contentDelivery option, and it's solved the issue. Specifically changing the contentDelivery option to lazyUncached was the golden solution.
As the popup component help states, the default functionality is: "lazy -- the default strategy described above. The content isn't loaded until you show the popup once, but then is cached."
....cached being the issue I was seeing.....
While the lazyUncached options states: "lazyUncached -- the content isn't loaded until you show the popup, and then is re-fetched every subsequent time you show the popup. Use this strategy if the popup shows data that can become stale."
The nasty thing about the lazy option is the fact that in the dialog it can show the previous cached result (even though you've selected a different record), and you can even appear to edit that cached result in the dialog, but when you press okay in the dialog and return to the previous table, it's updated the record you selected, not the cached result.
Confusing, but not a bug if you understand the popup contentDelivery options.
Frank, if you'd like it, I have the simple test case available to send you. But as it's not a bug I wont send it to you unless requested.
Thanks to both of you for your assistance with this one. Once again your help is much appreciated! :)
I'll take time out to blog about this in the next few weeks to assist others.
Thanks & regards,
CM.

ADF Faces and Struts confusion

Hello alltogether,
I'm developing with struts for some years now but I'm completely new to ADF and Faces.
I want to integrate a "simple" ADF Faces page with one TreeTable to an existent struts application.
The idea I had is to create an action within the struts-config.xml inheriting from the DataAction or DataForwardAction in order to load and prepare the data for the TreeTableModel.
When I call the ADF Faces page using the .do call for the Action created (I have to prepend /faces/ to the normal Action call) the page is rendered correctly but I do not enter my derived Action class at all.
So my question is: How is the preferred way to fill the Model of the TreeTable before the ADF Faces page is rendered. The necessary datasource is obtained from a struts basic action throughout the whole application.
I'm now struggeling with the pageDef.xml (using the documentation from here: http://www.oracle.com/technology/documentation/jdev/b25947_01/index.html) but I'm really lost since I do not understand what happens when and how resp. why it happens.
All I want is the following: Prepare and load the necessary TreeModel before the page gets rendered (the appropriate model depends on a parameter which is given in the request that is send and which successfully response should be the ADF Faces page with the TreeTable filled with the appropriate data)!
Can please somebody give me the necessary piece of advice?
I'm trying for almost a day now!
Many thanks in advance
Best Regards

Dear Mr. Vohra, It is not yet Clear whether we can use ADF Faces with Tiles,
With out using Facelets, of MyFaces?
Some users say they are using these two frameworks, but still complain of problems.
And you are suggesting to use facelets with ADF faces .
Can't we use ADF Faces and Tiles with out any other intermediate technology?
Thanking you,
Samba.
Message was edited by:
saasira

JDK dependency of adf bc and adf client

Hi!
We want to build an application which needs to run under jre 1.4.2.
Is it possible to build an application which use adf bc and adf client or are they dependent from jre?
How can I find which version of this libs run under which jre?
kind regards
Torsten

May be this is of help.
I guess you have to stay with 10.1.2.1 version of jdev. Still you can use 10.1.3 and configure it to use jdk 1.4.2 for you application, but you have to take care of the adf libraries you use (if they are 1.4.2 compatible).
Timo

ADF Faces and BC: Scope problem with managed bean

Hi,
I am using JDev 10.1.3 and ADF Faces with ADF BC.
I have created a managed bean which needs to interact with the binding layer and also receive actions from the web pages. I have a managed property on the bean which is defined as follows:
<managed-bean>
    <managed-bean-name>navigator</managed-bean-name>
    <managed-bean-class>ecu.ethics.view.managed.Navigator</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
    <managed-property>
      <property-name>bindings</property-name>
      <value>#{bindings}</value>
    </managed-property>
</managed-bean>I need the been to session scope because it needs to keep previous and next pages to navigate the user through their proposal. If i use session scope (as above) i get the following error when i click on a comand link which references a method in the above bean: #{navigator.forwardNext_action} which returns a global forward.
this is the exception:
javax.faces.FacesException: #{navigator.forwardNext_action}:
javax.faces.el.EvaluationException: javax.faces.FacesException:
javax.faces.FacesException: The scope of the referenced object: '#{bindings}' is shorter than the referring object     at
com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78)     at
oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211) at
javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)at
javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)     at
com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)     at
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)     at
javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)how can i get around this?
Brenden

Hi pp,
you need to create a managed (not backing) been set to session scope.
You can call/reference the managed bean from your page.
the backing bean is designed around a page lifecyle which is request oriented in it's design.
This is a simple managed bean from faces-config.xml
<managed-bean>
    <managed-bean-name>UserInfo</managed-bean-name>
    <managed-bean-class>ecu.ethics.admin.view.managed.UserInfo</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
      <managed-property>
      <property-name>bindings</property-name>
      <property-class>oracle.adf.model.BindingContext</property-class>
      <value>#{data}</value>
    </managed-property>
</managed-bean>and the getters and setters for bindings in your session scope managed bean:
    public void setBindings(BindingContext bindings) {
        this._bindings = bindings;
    public BindingContext getBindings() {
        return _bindings;
    }you can access the model from the managed bean using the the BindingContext if needed.
also have a look at JSFUtils from the ADF BC SRDemo application, there are methods in this class such as resolveExpression which demonstrate how to get the values of items on your page programatically using expression language. You can use this in your managed bean to get values from your pages.
regards,
Brenden

ADF Faces and MapViewer

Hello,
i'm investigating the possibility to write an ADF Faces MapViewer Client. I'm especially thinking of some Google Maps style navigation, e.g. panning by dragging the map.
I'd like to use AJAX to prevent full page reloads, so if i drag the map only the map image is reloaded.
Now the question are:
1. How do i extend the ADF Faces Components with AJAX Scripts without breaking the ADF Faces PPR concept?
2. Is it possible to trigger the reload of an ADF Faces component from my javascript?
3. Is it possibe to extend the java classes for the components or the renderer with my own code?
4. Has anyone already created an example that uses ADF Faces and MapViewer?
Thanks for help,
Dirk

Hi,
I just talk with our admin. The problem was server port 8080. Some of internet providers (also one of the biggest Polish) blocks this port. It's a reason - when I change internet connection to other everythig works OK. I thing it would be nice to change server port to default 80, if you want to make this application accessile for all.
Kuba

Is there any tutorial for jms development with jdeveloper out there ?

Hi
Thank you for reading my post
is there any tutorial which show us how to use jdeveloper +oc4j for JMS stuff ?
I mean an end 2 end tutorial to build mdb+jms resources in oc4j + client
it will be far better if the tutorial shows how we can use jdeveloper features for this task (if it provide any wizard...)

This is an example of a client:
public String listeningJMS (Context context) throws Exception
String topicName = "jms/demoTopic";
String topicConnectionFactoryName = "jms/TopicConnectionFactory";
TopicConnectionFactory topicConnectionFactory = null;
TopicConnection topicConnection = null;
TopicSession topicSession = null;
Topic topic = null;
TopicSubscriber topicSubscriber = null;
TextMessage message = null;
String fileName = null;
* Look up connection factory and topic. If either does
* not exist, exit.
try
topicConnectionFactory = (TopicConnectionFactory)
context.lookup(topicConnectionFactoryName);
topic = (Topic) context.lookup(topicName);
* Create connection.
* Create session from connection; false means session is
* not transacted.
* Create subscriber.
* Register message listener (TextListener).
* Receive text messages from topic.
* When all messages have been received, enter Q to quit.
* Close connection.
topicConnection =
topicConnectionFactory.createTopicConnection();
topicSession =
topicConnection.createTopicSession(false,
Session.AUTO_ACKNOWLEDGE);
topicSubscriber =
topicSession.createSubscriber(topic);
topicConnection.start();
System.out.println("Receiving: ");
TextMessage msg = (TextMessage) topicSubscriber.receive();
String xmlString =msg.getText();
topicConnection.close();
System.err.println("Received: "+xmlString);
fileName = this.getFileName(msg.getText());
} catch (Exception e) {
throw e;
} finally {
if (topicConnection != null) {
try {
topicConnection.close();
} catch (JMSException e) {throw e;}
return fileName;
public static Context getInitialContext() throws NamingException {
Hashtable env = new Hashtable();
// Standalone OC4J connection details
env.put( Context.INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory" );
env.put( Context.SECURITY_PRINCIPAL, "oc4jadmin" );
env.put( Context.SECURITY_CREDENTIALS, "welcome1" );
env.put(Context.PROVIDER_URL, "ormi://localhost:12401");
//env.put(Context.PROVIDER_URL, "ormi://localhost:23791");
return new InitialContext( env );
}

Any tutorial for performing manual CRUD beside ADF faces and ADF BC ?

Similar Messages

Maybe you are looking for