Any way to detect key loggers?

I have reason to believe that a keylogger was installed on my computer over the network maliciously. How would i find it if it was installed on computer? The mac keyloggers that I looked at all run in "invisible" mode (and can be put in any folder on the computer and will work)

What sort of network are you connected to: LAN, Corporate network, etc.?
As for a keylogger, if you're not connected to a network that manages your Mac, there'd be no way for anyone to install anything without Admin access, and only you should have that. So unless you aren't the Admin or leave yourself logged in all the time, this shouldn't be any concern.
If you want to look for a keylogger, you'd have to open Activity Monitor and look through all the running processes to see if there is one running. Then you could Force Quit it, and find it on your system and delete it.
Mulder

Similar Messages

Any way to detect when a NotificationListeners MBean is removed?

If I have an MBeanServerConnection through which I register a NotificationListener, is there any way to detect when either the MBean that the NL is registered for is removed or destroyed?
Specifically, I fire up a process, register an MBean.
A client connects to the process, and registers a NotificationListener.
Finally, I destroy the original process. How can I be notified that this has happened in my NotificationListener Client?
Is there something else I can use to monitor the JMX connection?

It sounds as if you are looking for a notification when an MBean is unregistered. To get that, you need to register a listener on the MBean Server Delegate. See MBeanServerDelegate and MBeanServerNotification.
Regards,
Éamonn McManus -- JMX Spec Lead -- [http://weblogs.java.net/blog/emcmanus]

IS THERE ANY WAY TO FORCE KEY COMMIT

Hi:
Is there any way in forcing when inserting/updating a record in a block to call KEYCOMMIT. For Example, if the user inserted/updated a record and before saving the user may quit the form. I would like to enforce the keycommit trigger to be called when the form is opted to close.

Hello,
Try the following in Key-Exit trigger:
BEGIN
IF :system.form_status = 'CHANGED' THEN
DO_KEY('COMMIT_FORM');
ELSE
EXIT_FORM(NO_VALIDATE);
END IF;
END;
Regards,
George
Hi:
Is there any way in forcing when inserting/updating a record in a block to call KEYCOMMIT. For Example, if the user inserted/updated a record and before saving the user may quit the form. I would like to enforce the keycommit trigger to be called when the form is opted to close.

Any way to update key field of PD infotypes

Hi All.
We want to change BEGDA of some PD infotypes via a background program.
We are able to change other fields via FM RH_PNNNN_MAINTAIN. But it does not update the key fields.
Any way to do that except delete and insert a new record?
Thanks in adv.

Contents of key fields cannot be changed in any table record
The only way of doing it is:
delete and insert a new record

Is there any way to detect commited deleted record in a table?

Hi All,
Is there any way to find out commited deleted record in a table without using triggers?
Thanks,

If you want to get back the deleted records and you are using 10g or above than Flashback technology can get that for you.
If you want to find out the commands that did the work and you are not using 10g than as suggested, Auditing and LogMiner can be the option.
Aman....

Any way to detect RTMFPP2PDisable

I have spent one week to find a send data problem and finally find that the user set RTMFPP2PDisable to 1.
That user can connect to my rtmfp server but cannot send any data.
Is there any api to detect that RTMFPP2PDisable is 1 and tell the user to enable it?

hi,I also Encounter this problem, I manually RTMFPP2PDisable = 0, still can't solve this problem, reinstall flash also cannot solve

Udf mapping: any way to detect last processed record?

Hi !
I need to detect inside my java user defined function, in the graphical mapping, if I am processing the last record of my input message, for example to add a trace message about how many records were processed, etc....I know I can detect the first one by mapping a function to the root node...and how about the last one ? are there any internal mapping variables available to recall inside a udf ?
thanks,
Matias

Hi,
one way would be to use a UDF of type queue
which will store all values from your message
this way you can get a total number of records
if you have the total then you know which one is the last one...
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Is there any way to detect if there 's an JRE installed on customer machine

I want to know if the customer has the JRE installed to make sure that my program can run.So the problem come,how can I know that.Someone told me to use
a command like "java -version",which seemed reasonable.In that way,i should write a bat file do that.This file will detect if there is an JRE installed,if there is get the version of the JRE and compare with the available JRE of my program,but if not,connect to the offical site to download.It is really hard for me to do that bat file.I am just a new programer without any experience.So I really appreciate if someone give me some advice.Sorry,my english is so bad.I am waithing for the help.

scphan wrote:
masijade. wrote:
P.S. @OP, java -version will only work if the path is set correctly, of course, and what it returns will not, necessarily, be the highest version installed on the system, just the particular version that the path points to first.>This works in versions 1.1 and up:
public class FindVersion
     public static void main( String args[] )
          String prop = System.getProperty( "java.version" );
          System.out.println( prop );
import java.io.*;
public class ReadVersion
     public static void main( String args[] )
          try
               Process proc = Runtime.getRuntime().exec( "java FindVersion" );
               BufferedReader in = new BufferedReader(new InputStreamReader(proc.getInputStream()));
               String line = in.readLine();
               System.out.println( "java.version="+line );
          catch ( IOException e )
               e.printStackTrace();
Yes, of course that does, when Java is already installed, of course. The question here was how to determine if it is installed, at all. And, that will also only give you the version of the Java currently being used, of course, and not, as I pointed out in that quoted post, not necessarily the highest version installed on the system.
Please make your posts applicable.

Is any way to get keys according to values in collection?

suppose,
three key has same value,and i want to get the these key in some array or some collection class when i have passed value of it. ( in jdk 1.4)
Message was edited by:
[email protected]

Hello,
i do not have answer to your question. But i found in this an other discussion in this forum : "FM for VK13 to get condition value of a material ?".*
The question was :
"Hi All,
I would like to know if there are any FM that retrieve condition values similar to transaction:VK13 based on access sequence.What I mean by access sequence is if there are no records maintained for the first key combination then it should search for the next key combination until a condition value exist.
I have all the mandatory information like VKORG,VTWEG,MATNR,VKGRP..etc similar to VK3
for all the key combinations of VK13.
Thanks,
Neeth"
The answer of Christian WOLF was :
"Hi Neeth!
Have a look at FM CONDITION_RECORD_READ. Don't fill PI_KOTABNR, then whole access sequence is searched (otherwise just one step of the access).
To fill KOMK and KOMP structures, you can get help from FM WV_KOMK_FILL_V, WV_KOMP_FILL_V (sales) or ME_FILL_KOMK_PO, ME_FILL_KOMP_PO (purchasing).
Regards,
Christian"
Is it helping you ?
Cordialement,
Chaouki AKIR.

Any way to show keys for an imported MIDI

I'm loving the "learn to play" feature of GarageBand for the piano. What I'm wondering is if there is a way for me to take a midi file that corresponds to some sheet music I have and import the file into GarageBand so it will show the corresponding keystrokes (on the staves and keyboard)?
There are some songs I'd like to learn and the approach GarageBand allows (playing while seeing visually how YOU are doing and what is being played in the actual song) is phenomenal, in my opinion, but limited to the small number of artist lessons they actually make available.

Lots of ways,
Add a volume effect to the master fader in the track mixer.
The one I would use would be a dynamics effect, added, once again in the effects section of the master fader. Use the gain make-up control in the compressor to make it louder and set the limiter control to -2db to catch any peaks.

Is there any way to detect the iphone is rebooting currently?

I am developing an app in which i want to call an API before device(iPhone) reboot.

If you're a registered developer, you will find a faster and more accurate response in the NDA'd private forums at developer.apple.com. Else you might try the general developer forum here on the ASC, although the threads I've seen there are more oriented to OS X.

Is there a way to detect two keys at the same time?

Is there a way to detect the keys if the user is holding two keys down at the same time?

yes, but you'll have to check outside of the event loop (i.e. don't check for it in the keyPressed method).
just use an array of keys that keeps track of which keys are currently down and which are up. you could use a boolean array but I use an int array because... Im not sure I've just done it probably because of my C background. anyway, basic setup:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
public class MultiKey extends JFrame {
     int keys[];
     public MultiKey() {
          super();
          keys = new int[256];
          Arrays.fill(keys,0); // 0 = key is up
          enableEvents(AWTEvent.KEY_EVENT_MASK);
          show();
     public void processKeyEvent(KeyEvent e) {
          // the 0xff below binds the key code to below 256
          int key = (e.getKeyCode()&0xff);
          if (e.getID() == KeyEvent.KEY_PRESSED) {
               keys[key] = 1; // 1 = key is down
          else if (e.getID() == KeyEvent.KEY_RELEASED) {
               keys[key] = 0; // 0 = key is up
     protected boolean isKeyDown(int key) {
          return (keys[key] != 0);
     protected boolean isKeyUp(int key) {
          return (keys[key] == 0);
}so now at any time in your code you can check key state by using the isKeyUp and isKeyDown methods. this is about as close as you get to input polling in java unless you use LWJGL or something similiar ;)
you can try out a full executable example at my site here - just open up the jar and start holding keys down :)

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

Have you tried:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Is there any way to retrive the data from my USB Key

Hello,
I have a usb key I have been using on a Win 7 desktop computer and a Mac Book Air to put in Data on a spread sheet.
I interchange to put in the data between the computer and my MBA without any problem.
I am today not able to open the usb memory key in either-Computer or the MAC Book Air.
Does that mean I have a coruppted USB memory key and the data lost for ever?
I have just put the USB memory key in my computer and it says File System CDFS.
I put it in MAC Book Air and it would not open either!!
Is there any way to access my data. I have no back up...

If the USB drive won't mount on either computer, it's probable that the drive has failed, in which case it's unlikely that you can recover any data from it. You can do a web search for something like "flash drive file recovery" and you'll find a number of utilities that purport to do file recovery, but all the utilities I'm familiar with require that the drive at least be mountable. There may be services that could attempt recovery, but they tend to be expensive.
The moral of the story is: never have only a single copy of a critical document, and if you must, never, never have your single copy only on a flash drive (or floppy, for those "old timers" who still use floppies).
Regards.

Any way to detect key loggers?

Similar Messages

Maybe you are looking for