Anybody can help me? I'm trying to start my computer and it shows this question mark. Then i restart it holding the option key and it shows this padlock with a password field. What should password should i put?
Anybody can help me? I'm trying to start my computer and it shows this question mark. Then i restart it holding the option key and it shows a padlock with a password field. What password should i put? I would appreciate any help
Contact Apple, or if you bought the computer secondhand, the previous owner.
(118258)
Similar Messages
-
I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ -
How do I stop an app from waiting? I have tried to reboot by holding the home key and power button to power down. The app is still grayed out and waiting so it cannot be deleted. Also, I have tried to sync the apps from my laptop and tried downloading new appswith no success. Can you help? Thanks
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?
I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.
-
# Question
I get this message when I try to open my google shared docs this week: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." - but that click/refresh doesn't work either. What's up?The backend end is in serious pain....on many levels.
Try this: Connection Problems Form -
my iphone 4 will not charge in the plug or connect to my laptop but my ipod 4th gen does. what could the problem be because the screen to show it needs charging will not come up and it will not restart by holding the home button and lock button. thanks
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W -
When I select the Recovery drive it tries and then I can't get further than a white screen. My curser so has 2 columns of marks like a horizontal barcode. I think it's a software problem. When I boot up in safe boot, I have run the disc utility and it says the disc is fine and I have run the repair permissions but it makes no difference.
Thanks AAndy but I had read all of that and tried everything but I have no disks as I upgraded from Snow Leopard over the internet. I have my Snow Leapard box but the disk is missing so I can't use that and anyway, I can only boot up in safe boot so it wouldn't recognise the superdrive. I had a copy of the recovery on a flash but it doesn't recognise that. I have redownloaded it but cannot get it onto an external because of safe boot. I have done the following
Reset the PRam, reset the desktop.
Tried the D key - no responce
Tried opt D and Command D - no responce
Comant R, jusr R and opt R - no responce
By no responce, I mean that the wheel goes round under the apple and then it goes white - and stays like that.
The only thing that I can do, is to boot up on the option key when it give me a choice of drive. If I select Recover, wheel turns under apple - white wcreen
If I boot up on the shift key, it boots into safe mode and there it stays, quite happy surfing the internet and playing stupid Facebook games, so long as I don't want to use any search engines (none of which work (not finder, not mail, not anything) and then after a few hours of forgotton pleasure, it crashes!
The only thing I can think of to do is to redownload Lion - it appears in my purchased account in the App Store but, Sod's law, our satellite internet is not working and I don't think my phone account has enough MBs - anyone know how many Lion is?
I can't backup because I can't use an external drive and old one stopped working a few months ago, so I haven't been backing up and as this is the first problem I have ever had with my iMac in 7 years, I had got a bit comlascent! However, I am pretty certain that I can re-install Lion without wiping my hard drive - I have done it years ago with an older system and an older Mac.
Do you think that downloading Lion again and re-installing it will help? Does anyone else have any suggestions?
Thanks for responding so far. -
I have been able to copy multiple photos on my Mac Book Pro by selecting the first picture and then holding the shift key while I select the last picture. This highlights all the pictures and then I can use the copy command. Recently that ability to select multiple photos (or files) has stopped working. I can only guess that I hit a combination of buttons that caused this feature to stop working. Any ideas on how to get this working again.
Thanks - MikeYour Template code is incomplete / corrupted.
That's why you can't edit it.
Try opening your .dwt file in a plain text editor like NotePad. Remove the editable regions from code. Save. Open in DW.
You will need to SaveAs Template (same name as the one used by your child pages). Add editable regions to match the ones in your child pages. Save.
Nancy O. -
I have tried everything. I don't no y my computer won't turn on. I pressed the option key while turning the computer on clicked the hd icon and now nothing just a grey screen and my mouse icon
Chipmunk International BV | Home | Aanbiedingen | Produkt Overzicht
If you don't have an account but would like to open one click here.
1301...
Model introduced: 2009
Serial number: W89380AH9GU (cleaned up from 'W89380ah9gu')
Production year: 2009
Production week: 38 (September)
Production number: 357 (within this week)
Model Number: MB881
Group1: MacBook
Group2: nothing
Generation:
Machine Model: MacBook5,2
CPU speed: 2.13GHz
Family name: A1181
Screen size: 13 inch
Screen resolution: 1280x800 pixels
Colour: White
Memory - flavour: DDR2-S-800
Memory - number of slots: 2
Memory - maximum total: 6GB
Memory - largest module: 4GB
Toebehoren en uitbreidingen bestellen: Art# Prijs
2GB SO-DIMM geheugen Mac 200pin DDR2 800MHz A-3571 € 29,00 ex BTW
Power Adapter 85W voor MacBook (16,6v) A-4020 € 18,00 ex BTW
Factory: W8 (Shanghai China)
External link: Repair guide by iFixit
Uitbreidingen: Uitbreidingsmogelijkheden van dit apparaat
Please enter any (extra) information you have on this model in the box below. (Type of Mac, CPU speed):
If you like this service and it has been of use to you then please donate us a dollar (just one will do). All donations no matter how small are greatly appreciated! -
When I turn my ipad on it says it is disabled and connect to ITUNES
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
I have a 4 year old macbook pro and when I turn it on, the screen and fan come on but there is a flashing question mark folder that appears. Nothing beyond that point....help?
There is no installed OS or you have a dead hard drive. Start by booting from the original installer disc that came with the computer or an installer disc that has a later version than the original such as a Snow Leopard DVD. Then you can do this:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
just caught a 2008 macbook when i started it up i pressed the option button to load but a lock show up on the screen and wants a pass word any help
thanksyou have to email or contact the seller to get the password from him.
-
I have a Seagate 2TB external hard drive with 3 partitions, one for Snow Leopard - my computer has Lion. I cannot seem to boot from this hard drive but I could yesterday. Any ideas?
Didnt help. The night I asked this question I was able to reboot from the external hard drive after running Disk repair (which said everything was fine). Tonight I have tried again and cannot boot from the external. So I tried the Safe Mode restart and then chose restart with the option key held down as well as shutting down and trying holding down the option key while turning on the power. I have never been able to reboot just choosing restart and holding down the option key. Whenever the reboot from the external has worked I've had to shut down and hold the option key while turning the power on. Now that is not working. My computer is brand new as is the hard drive. I don't know where to go from here.
I can access the drive just fine while I'm in Lion. I just can't boot up using it. Help! -
I need the option key to start my mac but It wont work! help!?
About a year ago I downloaded some program to make windows work on my mac. Recently I uninstalled it because I no longer needed it. The only thing was everytime I restarted my mac it brought me to a black screen and told me to insert a bootable disc. I looked up the problem and people told me that if I hold the option key when my mac make the chime sound I could select my hard drive. Well this worked fine for a while. But then suddenly my z key stopped working so I restarted my mac. And it turns out my option key wont work as well. So I can't boot up my mac. Does anyone have any suggestions?
I tryed using my pc keyboard but it didn't work...Try holding the X key instead of the Option key. If that works, once you're in Mac OS X, goto System Preferences/Startup Disk and select your hard drive then hit restart. That should solve your startup problems. You'll still need to resolve your Z and Option key problem but at least the startup should work.
-
There are two choices of selected start up disks:Main HD and Recovery HD, appearance without hold down option key. On the other hand, it start up normally show apple picture when I hold option key.
Hi artdiva28
Welcome to Apple Discussions
First go to *System Preferences > Startup Disk* > select the *Mac OS X 10.5. on Macintosh HD* > click the Lock > hit the Restart button.
Then if the iMac is still having trouble starting up, insert your Install Disk and restart holding the Option key. In Startup Manager select the Install Disk and boot into it, choose your language, skip the Installer and go up on the menu bar to Utilities and open Disk Utility. In Disk Utility select your Macintosh HD and hit the Repair button. Once finished note any errors and what was repaired for future reference. Quit Disk Utility and restart once again holding the Option key boot back into the Macintosh HD and eject the Install Disk.
Also see > http://support.apple.com/kb/HT2956
Dennis
Maybe you are looking for
-
I have a new laptop and want to transfer my itunes music across from the old one. What's the easiest /quickest method?
-
I've got an hp printer using cups. Yesterday everything printed fine. Today I go to print and get a "filter failed" error message in the job log. I checked the error log and it said to set the log status to debug. Using the web interface I edited
-
[Solved] How can i calculate all possible sums of an int array?
Hi, i can't figure out the algorithm for that: e.g. array=1,2,3,..n => P1=1+2,P2=1+3,P3=2+3,P4=1+2+3,... For a program language i use Java. thanks. Last edited by br4 (2008-12-10 15:23:40)
-
Dedicate midi controller to instrument
I would like to know how to dedicate a midi controller to a specific instrument. I currently use two devices. I would like the Korg micrKontrol to be dedicated to a specific instrument. I would then use my Keystation for the instrument I have activel
-
How come I can't choose Cox cable when trying to activate Lifetime and History on my Apple TV? They list so many providers, but do not list Cox. When are they going to add Cox as a choice? What is the delay in adding Cox? In the past I could acti