Anyone had issues with iTunes 11.0.4 like me? Keep getting initial (post upgrade) tutorial screen when going into iTune and loss of sync with 1st Gen Apple TV (infuriating as have to re-connect and re-sync everything!!!)

Following upgrade to iTunes 11.0.4 I have had intermittent but numerous (at least 10 incidents) where I go into iTunes and I am presented again with the initial (post upgrade) registration/tutorial screen....as if I have just upgraded iTunes!
This is very frustrating as apart from having to keep re-setting my preferences (e.g. display side bar and menu bar), iTunes no longer recognises my Apple TV (1st generation) as a device. If I check on my Apple TV under 'Computers' my iTunes library is displayed but 'grayed out' indicating the Apple TV can no longer 'see' my iTunes Library. To resolve, I then have to disconnect the Apple TV from my iTunes Library then reconnect again (which works) but ou've guesses it...al the music and movies I have synced across to Apple TV needs to be synced across again....which takes time as we know.
I have re-installed (and re-downloaded) iTunes twice and ruled out any connectivity issues. I suspect some form of bug with iTunes.
Anyone else experienced this and any tips to fix this?

Yes stupid itunes 11.0.4 does not sync to my Apple TV. I tried resetting it and no luck.

Similar Messages

  • Keep getting "unknown error (-39)" trying to import CD into itunes?

    Keep getting "unknown error (-39)" trying to import CD into itunes?

    Something was wrong with the iTunes library. I pointed iTunes to a different library, then pointed it back, and everything was fine.

  • I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV.  I have checked all connections and the video is xlnt.  Have also toggled thru every possible Dolby/Audio combination in settings.  Help!  Any suggestions?

    I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV.  Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt.  Have also toggled thru all possible Dolby/Audio combinations in settings.  Help!  Any suggestions?

    Hello again Parker -
    The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor.  To that I added the Apple TV.  The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor. 
    [I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
    So now I have:
         HDMI from the Cable Box to the Receiver
         HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
         HDMI from the Receiver to the Monitor
         RCA's from the Receiver to the Subwoofer and the other speakers
    In addition I have some backup connections:
         S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
         S-Video from the Receiver to the Monitor
    Wait - JUST FOUND IT! 
    By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links.  The video moved but the audio didn't.  Turns out the monitor was using the optical audio feed from the receiver.  So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
    So I first connected an optical audio feed from the ATV to the receiver - Audio!  Then I pulled it, but the audio didn't switch to the HDMI feed.  It stopped.  Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
    This is becoming a career!  Any suggestions?
    Will

  • Im having problems installing itune on my windows 8.1and keep getting this message on thereThe installer encontered errors before iTunes could be configured." and "Errors occured during installation.Your system has not been modified."

    ive tryed different search engine but getting no where

    Hello there, millwall86.
    The following Knowledge Base article offers up some great, in-depth steps to resolve issues with installing iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Keep in mind when uninstalling, the steps must be done as directed for the troubleshooting to be effective.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • 1st gen apple tv not showing all movies synced from iTunes.

    I have 30 movies in iTunes library that I synced to my 1st gen Apple TV.  I have viewed several of these movies in the past on the Apple TV but some are not coming up in the listings anymore.  I go back to iTunes and still see that they are still stored/synced to the Apple TV.  Why can't I see them listed anymore? (Can't see them under 'Watched' or 'Unwatched')

    Hi clur,
    I'm sorry to hear that you are having issues with your Apple TV and the most recent iTunes 12 upgrade. If you continue to have issues with your 1st Gen Apple TV not showing up in iTunes, you may find the troubleshooting steps outlined in the following article helpful:
    Apple TV (1st generation): Troubleshooting Apple TV not recognized in iTunes - Apple Support
    Regards,
    - Brenden

  • HT1535 has anyone had issues with syncing music? i can no longer sync any of my music that was already on my itunes to my phone for some reason???

    has anyone had issues with syncing music? i can no longer sync any of my music that was already on my itunes to my phone for some reason???

    Since this first message, the "Other" space has increased exponentially.  The first time, after the "restore", it increased to over 9 GB.  Later, I tried a minor restore again, and now it's over 10 GB.  I've seen someone suggest that text messages are to blame.  If my text messages are suddenly taking up 4 GB of space, I think we've got bigger problems.

  • HT4972 has anyone had issues syncing with microsoft exchange server since upgrading to ios 5.1.1

    Has anyone had issues syncing with microsoft exchange since updating to ios 5.1.1

    No bug I'm using exchange at work I've updated a couple of people here and it's working. 
    Your IT guy can't fix this for you?   This problem usually is due to the exchange server not recogonizing your account.   You have the right server and domain entered?

  • HT1349 Has anyone had issues with the iphone 4s and facebook.

    Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

    @razmee: rather unhelpful.
    @tata - we're having the same trouble, and the only solution we've found doesn't fix it.
    1) uninstall
    2) login on PC/MAC and change password
    3) reboot iphone
    4) install facebook app, reboot again
    5) login from iphone. 
    No joy.
    Safari works, but not for the apps.
    Of course, it's Facebook that has to fix this.

  • Has anyone had issues with their itunes not coming up?

    Has anyone had issues with their itunes not coming up?  I keep getting error message 13014.  I just bought a new classic ipod and am not sure if this is the problem.

    Hi
    Your new iPod has certain operating system requirements. Does your iMac meet those requirements?
    http://www.apple.com/ipodclassic/specs.html
    3rd Column on the right hand side, about a 3rd of the way down. To find out which version of iTunes you have, launch it and select "About iTunes" from the iTunes menu.
    HTH?
    Tony

  • HT4972 Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

    Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

    I think a few have.
    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Has anyone had issues with Administration\Data Import/Export\Data Import???

    Has anyone had issues with Administration\Data Import/Export\Data Import???
    I have a client who has recently upgraded from V2007 to V8.81. They were succesfuly  using this standard function to import supplier prices to their master price list, but now it has failed?
    I have looked at the file they are importing and it appears to be fine.
    On closer inspection, it did contain approx 46,000 entries, so I took the first 1,000 and created a test file, which imported fine.
    The only issue I found was Speed, with the test file of 1,000 records taking about 30 Mins to import. This appeared to get slower and slower the further through the file it got!
    Based on this, I have estimated that the whole file would takle about 13 hours to import. The client say that when they used to run it on version 2007 it was far quicker?
    In practice, it does appear to run, but the speed is the issue. Having said this, I set the whole file to run last night (over night)and this morning it had appeared to hang after about 2,307 rows, with nothing else being updated.
    Has anyone any ideas or is aware of performance issues like this?
    Thanks,
    Ian

    Always an option, but would you give your clients access to this tool?
    Not sure really.
    I have uploaded a copy of their database onto my test system and run the same routine. Its equally as SLOW
    I can't gauage if its an issue with 8.81 that 2007 didn't have, as I only have the client's word on it, however I have no reason to disbelieve them.
    Kind regards,
    Ian

  • HAS ANYONE HAD ISSUES WITH SCREEN CRACKING FOR NO REASON???

    HAS ANYONE HAD ISSUES WITH THE SCREEN CRACKING ON ITS OWN???

    Good Suggestion Tiki  And my suggestion try to keep your Device from getting to Hot, Protect it as well as you can, if your going to Pocket it Make sure it has allot of free space around it..

  • Has anyone had issues with Microsoft Word or Excel requiring initial set-up again after a software update?

    Has anyone had issues with Microsoft Word or Excel requiring a set-up after software udates?  I do not have product key, so unable to set up again.

    This laptop has original Microsoft word & excel provided by Mac when purchased and is legal copy.
    Do I understand you bought a Mac and it came with Microsoft Office?    I could be wrong, but I wasn't aware that was an option.  Or am I not parsing that sentence correctly and you bought a Mac and bought a legal copy of Office to install on it?  In which case, never mind.

  • Anyone had issues with on/off sleep button not working anymore

    Anyone had issues with on/off sleep button not working anymore?

    If there is Warranty or AppleCare make Genius reservation or set up Service and take or send to Apple for resolution. If no coverage, use virtual Lock Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even turn OFF iPhone. To turn ON, connect iPhone to power, charger or USB of computer.

  • Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

    Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

    Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
    [You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972]

Maybe you are looking for

  • An invalid public movie atom

    HEEELP, Is Apple letting me/us down. I have terrabites of original QT files captured from camera that are all getting the massag:'An invalid public movie atom' I discovered this when I had to re-edit a project I made a year ago. I constantly got the

  • Upgrading BOXI 3.1 SP3 to BOXI 3.1 SP4

    Hi Folks, Currently we are using BOXI 3.1 SP3 and Netweaver 7.1c in our Project. Our Client is planning to move from Netweaver 7.1 c to Netweaver 7.3. This move is not a upgrade they are going to remove Netweaver 7.1 c first and then installing Netwe

  • IDoc to HTTP communication....Is B2B required?

    Hi All, I have a scenario where I have to communicate from SAP IDoc to a 3rd party via HTTP communication. Please tell me if I have to configure this as a B2B or A2A. Is it must to use B2B for Idoc communication with 3rd party. If yes then please let

  • Would like Table Continuation Variable added to a paragraph style, such as to a table title

    My groups uses both Frame 7.2 and Frame 9 and we would like to include the Table Continuation variable to our table title paragraph tag definition so that we don't have to manually add the variable. Is this possible now? If so, how? Thanks Sherri McC

  • Sum reset on the date column when date changes by month

    Hi,, I have a query regarding summary columns that is " i want to reset the sum of a column based upon the date colum like the totals for the month of August then totals for the month of september and so on whenever a month changes the sum should be