Anyone have a solution for the ubiquitous problem of the printer not recognizing a new HP cartridge?

I have seen other posts about the HP printers not recognizing that a new HP cartridge has been put in.  At the price of the cartridges, this is a most irritating problem, and apparently a weak spot with the HP printers.  Mine is not heavily used at all and this is the 2nd time it would not recognize.  Thanks.

Please read this post then provide some details.  What printer model? What operating system?  Are there any error messages on the printer or computer screen?
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?

    Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?

    I'm not sure I understand the connection between iCloud and this problem.  Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)?  If so, there's almost certainly no connection between these two events.
    Where are you getting the files you're trying to open, and what specifically happens when you try to open them?

  • Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.

    Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
    I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
    In the problem report, this is the error that stood out:
    Crashed Thread:  8  Dispatch queue: com.apple.iad.iadidmanager
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090

    Hi there navicin79,
    You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/ht2311
    OS X Mavericks: If an app freezes or quits unexpectedly
    http://support.apple.com/kb/PH13975
    -Griff W. 

  • My display has quit working.  Does anyone have a solution for this problem?

    I have had my Verizon Jetpack MiFi 5510L for a couple of months now.  It has worked fine until a few days ago the display on it started looking strange and now has finally gone blank.  Does anyone have a solution for the problem?

    You can do both, whatever is more convenient to you.  As long as VZW gets its hands on the old device you will be good to go.  Replacements under the warranrty require the user to turn in the old device to VZW.  If your old device is not returned then you will be charged a fee for an entirely new device.  Purchasing a tracking number for a shipment of this kind would be a good idea if you choose to send it in.  Otherwise dropping it off at a store is the safest route you can take. 
    I would suggest contacting VZW phone support on this one and running through your options.  The VZW phone rep can coordinate a delivery to your local VZW store if they do not already have one in stock.  You can also turn in the old device in person to rule out any non-returned device fees.

  • When I try to install PSE11, I keep getting error 1935, does anyone have a solution for this problem

    When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
    this problem?

    This thread from the Premiere Elements forum may help:
    http://forums.adobe.com/thread/1286807?tstart=0

  • I have a button in JSP page inside an UIWebView by pressing the button i want to run another existing iPhone native application in background only.Do anyone have a solution for this.

    I have a button in JSP page inside an UIWebView by pressing the button i want to run another
    existing iPhone native application in background only.Do anyone have a solution for this.

    Sounds like a virus.... I hope it's not...
    Launching Other Apps within an iPhone

  • Hi there, In CS3 I saw both my scanners in Import From Device, but in CS4 they are vanished, anyone have a solution for me?  Thanks in advance.

    Hi there, In CS3 I saw both my scanners in Import From Device, but in CS4 they are vanished, anyone have a solution for me?  Thanks in advance.

    The Twain.Plugin conflicted with bad scanner drivers made by scanner manufacturers and caused too many problems so it is not installed by default. Its in the goodies folder.
    But I have to ask. Why tie up a $1000 application to use a $100 scanner? Use the scanner as a stand alone with the software that came with the scanner or use VueScan that way you can keep working while you are scanning. BTW you know that you are using the scanner software when you scan through photoshop right. Photoshop has no scanning capabilities built in.

  • I have put Netflix on my Macbook Pro but Silverlight will not run. I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.

    I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks

    Try running Safari in 32 bit mode.  In get info box for Safari,
    check open in 32 bit mode.  There have been some oddities
    on some systems that can cause some issues.
    I had thought MS had fixed this, but may not have.

  • I also am having problems creating cd cover. When I try to print onlt text comes out picture art is 1 big black square. cannot load library error shows up 126. Do anyone have a solution for this problem?

    Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?

    One other note I do have parallels installed but not running on both machines.
    Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
    Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
    Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
    10:18 PM Sunday; June 1, 2008

  • I cannot view the option to enable itunes match on my iphone 4s, does anyone have a solution for this?

    I have an iPhone 4S wi iOS 5.1 installed and I can't view the option to enqble iTunes Match under the Music menu. I have subscribed to the service and it works fine on my iPad. Does anyone have a solution to this? Can anyone enlighten me as to what's going on?
    Thanks in advance!

    Yes, that's exactly where I was looking, and that option to turn iTunes Match on/off was non-existent, however, I don't know what happened, it just appeared and is working fine.
    Thanks!

  • HT1386 After updating my I phone 4s and I tunes, it downloaded my entire I tunes library to my I phone. I do not wannt all this music on my phone and have tried every thing to correct this with no results.Does anyone have a solution for this

    After updating the software on my I phone 4s it downloaded my entire i tune library to my phone. I have tried everything to correct this problem with no results. Does anyone have a fix for this. I do not want the entire lirary of music on my phone

    BINGO! Thanks very much. Now I have to figure out why my video capabilities have disappeared

  • Hi! Did anyone happen that AppStore simply disappear? Anyone have a solution for this problem? Thanks!

    Hi!
    Did anyone happen that AppStore simply disappear?
    Have anyone a solution for this problem?
    thanks! bbj

    Hi.
    Do you mean that App Store has disappeared from the Dock? If so it'll still be in Applications. Select it in Applications, when it opens in the Dock move it one or more places, it will then stay there to access next time you want it.
    If you don't mean the above, see if you have accidentally moved the application to the Trash.
    Good luck,
    Adrian

  • HP OfficeJet Pro 8600 - Anyone have a solution for the 8600 freezing up?

    I bought this All-In-One for xmass and the initial install went fine.  I've attached it to my wireless network for use by all the PC's/Laptops in my house.  After a couple of weeks, I noticed that the printer connection was lost, and when I tried to scroll through the printer menu, I discovered it was frozen or locked.  I could not even get it to turn off with the power button.  The only way to regain access was to unplug the printer.  Once it's back up, it seems to work for no more than 15-20 minutes, and then locks up again.  I thought it was a faulty machine so I returned it to store for a replacement.  The second printer acted the exact same way.  It worked fine for a couple of weeks and then began freezing up again.  I'm going to return this one and just get my money back if I can't get this resolved. 
    I did see another posting about this, but the resolution did not work (re-install software on PC and return printer to factory settings). 
    Has anyone found a solution to this issue?

    I'm on my second 8600 within 2 weeks - tonight I stumbled upon a *possible* glitch that may have caused both printers to freeze. I did not have my wireless connection set up but I did have the wireless enabled on the printer - the blue wireless indicator light on the console was flashing. This printer repeatedly froze, requiring the power cord to be disconnected/reconnected to reboot the printer.  At some point I disabled the wireless, using the console menu and the machine no longer froze. WHAT???  When I restarted the wireless and completed the setup, the blue indicator light went solid and...so far no freezes.  I can access the printer via wireless connection and a USB connection on a different computer.   IMO, this should not happen.  I'm thinking if my router goes down, it will cause a wireless connection failure and the printer will freeze - again.  I will test this theory when I feel up to it - but, the frustration of the past couple hours has me very disinterested in screwing with it now - it continues to work so I think I'll go fishing....
    AL

  • Does anyone have a solution for the unstability on ios6

    Hi, i have recently downloaded and installed the latest software, ios6.
       I really like the updated theme (i.e. I like the music player screen and the app store layout) However, i am sorely disappointed with the performance. The software is very unstable. Apps and games constantly crash. It isn't certain applications though, all the applications installed on my ipod constantly crash. App store is virtually impossible to use also as it crashes literally after every few seconds of use. It is also very slow. I was wondering if anybody knows of a solution or if there is a coming update to resolve the problem"s".

    Hi,
    Some of what you are describing is commun to a lot of user, some other not.
    For specific third party apps crashing, I guess you will have to wait until an update for iOS6 from the developpers.  As for the App Store crashing, some research in forums that this is to be spreaded to many users.  For this one, no options seems to efficienly handle the issue and therefore, we will have to wait until an Apple update.
    The fact that all your apps are crashing and that you got slow performances seems to be a more specific issue.  I think that performing a restore on your iPod should worth your time.  I personally got a few crashing apps as well as the AppStore but other than this, performaces are quite as with iOS5.

  • Does anyone have a solution for the I phone 4 acting as though it is sideways under most applications?  Is there a simple solution?

    My daughters I phone 4 acts as though it is sideways when being used for the camera, messaging, and music,  Shutting the phone off seemed to fix it the first time, but it has acted up again and that remedy no longer works.  Am I missing something in the settings ?  Is there a simple solution ?  Thanks

    Hi,
    Some of what you are describing is commun to a lot of user, some other not.
    For specific third party apps crashing, I guess you will have to wait until an update for iOS6 from the developpers.  As for the App Store crashing, some research in forums that this is to be spreaded to many users.  For this one, no options seems to efficienly handle the issue and therefore, we will have to wait until an Apple update.
    The fact that all your apps are crashing and that you got slow performances seems to be a more specific issue.  I think that performing a restore on your iPod should worth your time.  I personally got a few crashing apps as well as the AppStore but other than this, performaces are quite as with iOS5.

Maybe you are looking for

  • Bug report: vpn (ipsec) interface number in snmp always change

    Hi, this is a bug report for RV082 hardware version 3 and 4, firmware version 1.x, 2.x and 4.x (all latest versions). I hope someone from cisco/belkin reads it. Summary: The snmp interface number of a VPN Tunnel change when the VPN tunnel disconnect

  • Airport Extreme to extend wireless – How best to set this up?

    I added an Airport Extreme to my ISP Service provider box in order to extend my home / home office networking capabilities. Currently I have a MBP (May 2010 model) with ethernet & wireless; a PBG4 (Feb 2005 model) with ethernet & wireless; an eMac (F

  • Brand new MPB crashing after welcome screen :/ ???

    Hello, I bought a brand new MPB, took it out of the box yesterday hooked it on the AC, started it up, got the nice welcome video, went through the language settings, and then when i had to give in my name all **** broke lose. I got the beautiful blac

  • Pass results of one script to another?

    I have 2 scripts: The first converts a Word document into a PDF, the second splits the PDF into separate files and names the files after a text string it finds in the PDF. I've tried to 'join' them to make a single script (or Automator Workflow, but

  • You have not maintained a rule for the fiscal year variant

    1) I have Fiscal Year Variant in the Cube ( it got added along with fiscal year ) but there is no Fiscal year variant in the datasource & when I dont map it Transformation activation prompts error " You have not maintained a rule for the fiscal year