Anyone having Audio Issues with new Mac Mini, new Thunderbolt Display and new Pegasus R4?

I can't listen to the built-in speakers on my brand new Apple thunderbolt monitor to the terrible audio quality.  I'm running Mac Lion on a new Mac Mini with a brand new Promise Pegasus R4 - all purchased in January 2012.   The entire setup is connected via Thunderbust errh, I mean Thunderbolt. 

Hi,
I'm also having an audio problem, which I suspect now is caused by my Thunderbolt display.
See https://discussions.apple.com/message/21499606#21499606 for the small thread.

Similar Messages

  • I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    Hello, since nobdy else has replied...
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • Is anyone having volume issues with the new Iphone 4S?

    Is anyone having volume issues with the new Iphone 4S?

    Yes, the volume on my iPhone 4s will max out without me touching any button or setting.  When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons.  It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.  
    Anyone else seen this?

  • Is anyone having Mic issues with iPhone 5?

    Is anyone having Mic issues with iPhone 5? Speakerphone works but not the mic, on phone calls and memos.
    Took it to local Genius campus and after taking off the back screen and case, they blew air into the mica and it worked for about 20 mins.
    I can't have a ready can of air around every time the mic goes out.
    Anyone else had similar issues?

    I am having a similar problem. I had the iPhone 5 delivered yesterday. On most of the calls I tried, the person on the other end could hear me just fine on speakerphone, but not on the regular mic. It was garbled, or I would cut in and out. I could always hear the other person clearly.
    I just got back from a Genius Bar appointment where they gave me an entirely new phone. The issue exists on this one also, though now it seems like the audio is more muffled than garbled or spotty. Again, speakerphone works, and I can hear the other person clearly.
    I had originally restored backup from my 3GS, but before I went to the Genius Bar I restored to factory settings just to be sure it wasn't a software issue (it wasn't, apparently). I did not restore from the old phone for this new handset either.
    Thanks for any suggestions...frustrating, for sure!

  • Has anyone having an issue with the iphone 6 signal cell strength on Verizon?

    Is anyone having an issue with the iPhone 6 signal on Verizon?

    I'm having the same issue as most of you on this forum. my current OS is 4.3.5 and after a factory reset, the camera started working fine, however, once i done the restore the camera reverted back to the same issue - "the shutter on the screen wont open, and the still/video switch just flashes" - what is more strange is, i have the HP home&biz app installed and this has a camera function and the camera seems to work fine with that, therefore suggesting there is nothing wrong with the hardware and this is a software issue. I'm currently awaiting a member of the Apple support team to call me about this, will keep you posted. BTW - someone suggested, going into Location Services and switching off the camera and apparantly, the issue was resolved for them, unfortunatly, this didn't work for me extremly odd issue indeed!

  • I have an older apple keyboard, either a M2452 or a M7803.  Do these have compatibility issues with 2012 Mac Minis?

    I have an older apple keyboard, either a M2452 or a M7803.  Do these have compatibility issues with 2012 Mac Minis?

    I understand that you can connect any keyboard to a Mac Mini, my concern is that the modern Apple keyboards I have seen seem to have a layout much more similar to their PC counterparts. ie, they no longer have the "apple" key, etc. 
    Will I be missing functionality (using this older Apple keyboard)?

  • Bluetooth lags on new Mac Mini w/ Wireless keyboard and Magic Trackpad

    Hi everyone,
    I just bought a new mac mini (the basic model) and attached it via HDMI to a HD TV. I bought the mac wireless keyboard and magic trackpad to go with it. Everything works except that both the keyboard and mouse are consistently slow. Not quite to the point of un-useable, but very noticeable.
    I've read that it might be radio interference with the bluetooth signal. To test this, I put my Macbook Pro right next to the new mac mini (while it and the screen were on) and paired the keyboard and mouse to the macbook pro. Everything was super fast, no lag - so that leads me to think the problem is with the Mac Mini. I've tried playing with all the bluetooth options, to no avail.
    Anyone have any suggestions? I've also tried attaching a bluetooth magic mouse and had the same slowdown. Nothing seems to affect the lag, it's very consistent and probably around half a second between keystroke or mouse movement and it's reflection on the screen.
    Thanks,
    -Mike

    Hey All,
    I've got the same issue with my Mac Book Pro and a new Samsung LED 3D TV. Its connected through a DVI out from the mac to a gold HDMI adaptor, then to HDMI into the TV. I've used this set-up with my last HDTV which was a Sharp LCD, and there was no lag and no issues.
    I noticed that for me, the lag appeared on the TV, but not on the laptop, so I thought it might be the connection (If I went right to HDMI instead of an adaptor maybe it'd be better) but I don't think it is given that the last TV worked fine.
    I then went to my display settings in the control panel on my mac and changed the refresh rate from 24 Hertz to 60 Hertz (NTSC) on the TV and the issue has pretty much completely dissappeared. Not sure why that was the default, but I imagine certain video and other media will play even smoother as well!
    Woo hoo!
    Hope you all figure this out too!
    TS

  • I have set up photoshop cs6 onto my new mac book pro retina display and it is so blurry i can't use it, is there an update i can use?

    I have set up photoshop cs6 onto my new mac book pro retina display and it is so blurry i can't use it, is there an update i can use?

    HiDPI and retina display support FAQ

  • Can I use Dual Displays with New Mac Mini (HDMI   Thunderbolt)

    Hello Everyone,
    This question may have been asked before... but I just purchased a beautiful new Mac mini and it has an HDMI port in the back and a Thunderbolt port.  I am using a new DELL 23" HDMI monitor that also accepts DVI.   I think I could run another monitor on the Mac Mini, but I don't know which is the best way to go... I purchased a mini-display port to DVI adapter because I heard thunderbolt could accept the mini-display cable.
    1.  Should I purchase the other identical Dell monitor and then run it on Thunderbolt 2 DVI and run it DVI
    2.  Or is there a HDMI splitter that splits the signal into two cables and go that way?
    Any advice would be greatly appreciated  Thanks!

    I just got the mini server and run a 24" LCD off the HDMI port and a 19" off the displayport (adapter to DVI) and it works a treat there's no need for any splitter.

  • New Mac Mini + 30" Apple Display = 1280x800??

    I'm a long time Apple user and Apple developer. So I just bought a new Mac Mini (Macmini3,1) assuming, perhaps foolishly, it would simply plug into my Apple 30" display and I'd be able to get native resolution.
    Unfortunately, 10.6.1 on the Mini only lists 1280x800 as the highest available resolution and it's not clear I have any options. Searching this forum only leads to hundreds of hits of every kind of display problem imaginable, and I frankly am pretty disappointed from using two relatively brand new Apple products together, only to get what feels like a PC experience.
    Thanks in advance,
    Andy

    Thanks for the assistance guys. Yes, upon closer inspection of the info of a DVI dual link adapter is there, but then again I wasn't expecting a DVI device that plugs into a DVI socket to NOT work for two Apple products. What also threw me is that since my main machine is a MBP from two years ago (with the built-in dual link), I wasn't thinking about that stuff. Also, after reading the reviews for the DVI dual link adapter, I'm not sure I even want to go that route--there's some BAD stories there, ugh.
    Sigh, I guess "it just works" is reserved for their ad campaigns these days.
    Anyway, thanks again guys.
    Andy

  • HT4623 Anyone having major issues with the new 6 download?

    Was this new download tested before it was released?
    Will I need to buy the latest and greatest I-phone, so I can make calls in the future?
    Does anybody else find it funny that a new phone is out and now my 4s is slower and suddenly apps are freezing up?
    Who voted on the new charger? I assume cause the new phone is slimmer a totally new charger is required?
    Should I go online and read other people's opinions?

    Yes, No, No, Apple, YES!
    Do you not search the forums and the Internet before asking stupid questions?  Apparently you do not.

  • Issues with my Mac Mini & a Linksys Wireless Network

    I have Linksys WRT54GS router hooked up to a Sprint DSL modem. Attached to the router is my homemade PC a Pentium 4 3.06 GHz HT with a Linksys wireless card installed, another homemade AMD computer connected via Ethernet, and I am attempting to get my Mac Mini on board too. The network is set to 128 Bit WEP security with a password. Both of the PCs are connected fine getting good speeds. My issue is that on the Mac when I attempt to connect it does one of the following things: (1) deems my password as invalid, (2) says there is "an error joining (network name)", (3) when I change the WEP Personal to WEP 40/128-bit hex will not allow me to type more than one character, or (4) when I change the WEP Personal to WEP 40/128-bit ACSII it either allows me to type the password and doesn't allow me to press OK or won't allow me to type a password at all. I did not attempt the LEAP because I don't know of a User name, just a password. Any suggestions on this dilema? Any help would be greatly appreciated!
    Mac Mini 1.5 GHz Power PC G4 // Homemade Pentium 4 - 3.06 GHz Windows XP Pro   Mac OS X (10.4.6)   2nd Gen iPod Mini 4 Gb Silver, 5th Gen iPod 30 Gb White

    Welcome to the Forum
    I found my Macs prefer using WPA encryption and they do this with ease. I had loads of issues when I first set up the LinkSys and attempted to use WEP, besides WPA is a lot more secure.

  • Anyone having font issues with Mavericks?

    We just upgraded from 10.6 to Mavericks and now we are having font issues.  About half our fonts will not install...having triuoble with all types of fonts, true type, free fonts, adobe fonts, etc...

    I had tons of problems, but it will work. I went to adobe troubleshoot fonts mac OSX.
    Here is the link
    http://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
    This should help.

  • PE 8?  Is anyone having an issue with HD editing?

    This is my second thread.  Sorry if I am being repetitious
    PE8 locks up on me when I try to edit video.  Im using Vista 64 and the application goes white and says (not responding)  I am editing HD m2ts files that are about 3gig.  When I edit a small 100meg file it doesn't lock up.  I have tried every HD setting to for my project and get the exact same result.  Right now I am uninstalling the software, and reinstalling it. 
    Am I able to get help from Adobe? I tried calling yesterday and was on hold for 45 min before I was cut off. 
    Someone tell me what is needed to edit HD video... 
    Here are my PC specs:
    vista 64
    Intel i7 920
    AUSUS P6E Motherboard
    6G ram
    Nvidia Quadro 1800 diver 191
    2 - 500G, 7200rpm Hard Drives
    The video came from my Panasonic HDC-HS300 camcorder.  I got the files by copy and paste.  When I plugged in my camera I treated the camera hard drive like I would any other and located the files and ctrl-c ctrl-v.  The files are m2ts.
    Info about the file from a program called AVIcodec
    File     :  2.75 GB (2.75 GB),  duration: 0:23:25,  type: DSH,  1 audio stream(s),  quality: 98 %
    Video :  2.68 GB,  16445 Kbps,  29.970 fps,  1920*1080 (16:9),   = MainConcept (Adobe2) AVC/H.264
    Audio :  64 MB,  383 Kbps,  48000 Hz,  6 channels,  0x2000 = AC3 DVM

    Just to give a little update...  I have done everything that you guys have told me and have gone through each step of the troubleshoot Freezes... support document.  I then called tech support and spent a good hour on line with them and the support supervisor.  They are not sure what the details are, but they will elevate it to higher powers. 
    Being on the phone with tech support forced me to look close at the problems and I have a few opinions.
    With a small AVCHD (m2ts) file there are no issues. With a 75meg I could immediately begin to edit once the file is set in the sceneline.  With a larger file 300meg I had to wait a min or two and then it worked fine. 
    However with a large file, 2.75g, there are major problems. 
    When the file is in the organizer screen there is a process called conforming and then rendering that takes place. With a very small file this is done quickly, with a med size file this is done in the background.  The problem is with a large file.  Once you move the file from the organizer to the sceneline the process stops and elements 8 locks up.  My next step is to load the clip I want to edit and wait for it to conform and try to edit.  If that doesn’t work I will let it render and try.
    There is an issue with the file size that was not there in premiere elements 7.

  • Can anyone recommend audio/midi interface LE7 + Mac mini

    Hi all!
    I've been working with LE 7 for some weeks now. My setup is really simple: a Mac mini, LE7, some free plugs, that's it. Now, I've come to the stage when I need to record guitar, bass, keyboard and add some vocals. Could someone please recommend a decent interface that is compatible with my setup?! I don't have very hi-tech requirements, I just want something that works. No need for lots of inputs, and I've only got one keyboard. FireWire or USB should not matter, unless you know what to prefer. Low budget....
    Many thanks in advance!

    Firewire Interfaces are always better than USB ones for audio. I really love the Focusrite Saffire but maybe it's more than what you're willing to pay. You could also check out Presonus Firebox or M-Audio FW Solo. However, M-Audio drivers are sometimes a little on the buggy side. If you want to go the USB way, I'd check Tascam's US-122.

Maybe you are looking for

  • Backing up and restoring to another computer

    Before upgrading to 10.5.7, I was able to back up iCal on one computer, then restore it on another computer so I would have a duplicate just in case. Now it won't do it at all. Both iCal versions 3.0.7 are the same on both computers. I'm starting to

  • All day events not appearing on iMac,Iphone or web. But does for iPad!

    I have a subscription to 'iTunes on sale' - link below. It lists iTunes vouchers that are on sale over a period of days. I can see the entries, or all day events, on my iPad calendar, but not on my iMac, iPhone or me.com calendar! http://www.google.c

  • BAPI_SALESORDER_CREATEFROMDAT2 is not carrying out pricing for variant config materials

    Hi Guys I need to create a BAPI to create sales orders coming in through a web service from an external system, for normal materials all works well, but for variant config materials the pricing is not happening, like the way it does when I manually c

  • How to get the upload file from a html form ?

    I have a <input type=file ...> control in my form, and the user use that           control to submit a file           to my web server. The porblem is the getParameter() function of           HttpServletRequest only return the           filename. Doe

  • Error compiling movie

    During publish + share operation I receive the following "Export Error" Error compiling movie. Unknown error. The timeline plays through without any troubles and I rendered the footage before attempting to export.  I read a vague tip that some of the