[Apache 2] Critical error mod_rewrite: Could not set permissions on rewrite

Hi,
Well I had a look around to this problem and it seems it is specific to mac os system on intel machines, so I send my post here.
I had installed the apache 2 server from www.serverlogistics.com and it seems to start. However it is impossible to log into my local website with an error in my web browser "can't log to "localhost" server".
By reading the logs I got in /Library/Apache2/logs/error_log (where there is also a httpd.pid file): [crit] (14)Bad address: mod_rewrite: Could not set permissions on rewriteloglock; check User and Group directives Configuration Failed
So, I commented the line "LoadModule rewrite_module modules/mod_rewrite.so" in /Library/Apache2/conf/httpd.conf with no efffect at all.
Then I don't know what to do.... any idea please ?
NB : I did not configure or set any htaccess file in any directory.
Denis

denis_4l wrote:
Hi,
Well, I had tried several ways among others MAMP. With, MAMP, I experienced some problems running MySQL and or Apache server.
If you'd like help, you need to describe the specific problems you're having. You're not giving people here much to go on in order to be able to help. Without knowing what you've already tried, and what the results were, it's impossible to say if you've just made a simple mistake or if you've truly hit upon something that won't work. The Apache logs are especially helpful, with lots of detailed information to help in troubleshooting.
To say the true, I bought this Macbook because the system kernel is 100% compatible with Linux, and I was full of naives hopes, thinking that I will install/compile easily softwares that are usual under Linux world.....
I certainly haven't had much problem compiling and installing software that's distributed as source code, though I haven't tried to compile Apache. While it's true that much of the software will compile, it's also true that you might have to make some small changes here and there to the source code to get it to work correctly. But you might also have to do the same thing to get them to compile on different Linux distributions. So OS X isn't that different in that respect.
If you want to get Apache 2 running with MAMP, post back with specific information on what problems you had and I'll try to help. I've been hacking at Apache installations for many years now, so if I know the problems you're having, there's a good chance I've been through them, too.
charlie

Similar Messages

SIOCSIFFLAGS: Unknown error 132, could not set interface eth1 UP. Help

After lots of trouble getting my wireless card working and installing the ipw2200-fw drivers to get it working i have encountered an other problem.
I set up a netcfg profile called mynetwork but now whenever i try to connect using netcfg mynetork, i get:
SIOCSIFFLAGS: Unknown error 132
Could not set interface 'eth1' UP
Being a noob I have no clue how to fix this. Anyone know how to make it work?

See this bug report for some clues:
https://bugs.archlinux.org/task/19507
Also, duck duck go/google is your friend: please search before posting...

Could Not Set Up Apple Pay

Can't seem to setup apple pay. Have tried both in settings and passbook. I get the same error.
"Could Not Set Up Apple Pay
An error occurred while setting up Apple Pay"
Anyone have any ideas why this is happening? I have re started the phone twice, nothing. Same error. Can't get pass the "Add Credit or Debit Card" link.
Thanks!

I have two different email addresses for my iCloud and iTunes accounts, and the email I used for my iCloud was never set up for iTunes. After I signed out my iTunes account and signed in using the same email as my iCloud account, I was finally able to set up Apple Pay. I can see this can be a common problem for many people like me, Apple needs to provide an update to fix this bug.

Error trying to run SSIS Package via SQL Server Agent: DTExec: Could not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object

Situation:
SSIS Package designed in SQL Server 2012 - SQL Server Data Tools
Windows 7 - 64 bit.
The package (32 bit) extracts data from a SQL Server db to an Excel Output file, via an OLE DB connection.
It uses 3 package variables:
*) SQLCommand (String) to specify the SQL Statement to be executed by the package
Property path: \Package.Variables[User::ExcelOutputFile].Properties[Value]
Value: f:\Output Data.xls
*) EXCELOutputFIle (String) to specify path and filename of the Excel output file
Property path: \Package.Variables[User::SQLCommand].Properties[Value]
Value: select * from CartOrder
*) VarObjectDataSet (Object) to hold the data returned by SQL Server)
Property path: \Package.Variables[User::VarObjectDataSet].Properties[Value]
Value: System.Object
It consists out of 2 components:
*) Execute SQL Task: executes the SQL Statement passed on via a package variable. The resultng rows are stored in the package variable VarObjectDataSet
*) Script Task: creates the physical output file and iterates VarObjectDataSet to populate the Excel file.
Outcome and issue:The package runs perfectly fine both in SQL Server Data Tools itself and in DTEXECUI.
However, whenever I run it via SQL Server Agent (with 32 bit runtime option set), it returns the errror message below.
This package contains 3 package variables but the error stating that a package variable can not be set, pops up for the VarObjectDataSet only. This makes me wonder if it is uberhaupt possible to set the value of a package variable
of type Object.
Can anybody help me on this please ?
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 6:40:20 PM DTExec: Could
not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object. Started: 6:40:20 PM Finished: 6:40:21 PM Elapsed: 0.281 seconds. The package execution failed. The step failed.
Thank you very much in advance
Jurgen

Hi Visakh,
thank you for your reply.
So, judging by your reply, not all package variables used inside a package need to be set a value for when run in DTEXEC ?
I already tried that but my package ended up in error (something to do with "... invocation ...." and that error is anything but clearly documented. Judging by the error message itself, it looks like it could be just about anything. that is why I asked my
first question about the object type package variable.
Now, I will remove it from the 'set values' list and try another go cracking the unclear error-message " ... invocation ...". Does an error message about " ... invocation ..." ring any bells, now that we are talking about it here ?
Thx in advance
Jurgen
Yes exactly
You need to set values only forthem which needs to be controlled from outside the package
Any variable which gets its value through expression set inside package or through a query inside execute sql task/script task can be ignored from DTExec
Ok I've seen the invocation error mostly inside script task. This may be because some error inside script written in script task. If it appeared after you removed the variable then it may because some reference of variable existing within script task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Windows could not set a partition active on disk 0. error 0X80300024

I followed the "Step-by-Step: Basic Windows Deployment" Link: http://technet.microsoft.com/en-us/library/dd349348%28v=ws.10%29.aspx
after creating aotounattend.xml file, I went to step2: building reference installation. however, recieving the below error message:
"windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024"
it happened in the beginning of installation.
what's more, before that error, system still asked me to choose which languange in the installation and I also need to click install button to begin installation.
I believe that with answer file, windows 7 should start installation automatically. Am I right?
Here is my answer file:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="specialize">
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Home_Page>http://www.google.com</Home_Page>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Reseal>
                <Mode>Audit</Mode>
            </Reseal>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <ProtectYourPC>3</ProtectYourPC>
            </OOBE>
        </component>
    </settings>
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-us</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-us</InputLocale>
            <SystemLocale>en-us</SystemLocale>
            <UILanguage>en-us</UILanguage>
            <UserLocale>en-us</UserLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserData>
                <AcceptEula>true</AcceptEula>
            </UserData>
            <DiskConfiguration>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Order>1</Order>
                            <Size>300</Size>
                            <Type>Primary</Type>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Extend>true</Extend>
                            <Order>2</Order>
                            <Type>Primary</Type>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Active>true</Active>
                            <Format>NTFS</Format>
                            <Label>System</Label>
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                        </ModifyPartition>
                        <ModifyPartition wcm:action="add">
                            <Format>NTFS</Format>
                            <Label>Windows</Label>
                            <Order>2</Order>
                            <PartitionID>2</PartitionID>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>0</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
                <WillShowUI>OnError</WillShowUI>
            </DiskConfiguration>
            <ImageInstall>
                <OSImage>
                    <InstallTo>
                        <DiskID>0</DiskID>
                        <PartitionID>2</PartitionID>
                    </InstallTo>
                    <InstallToAvailablePartition>false</InstallToAvailablePartition>
                    <WillShowUI>OnError</WillShowUI>
                </OSImage>
            </ImageInstall>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:c:/users/dyang3/desktop/install.wim#Windows 7 ENTERPRISE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Hi all,
I have created an answer file using Windows SIM tool. Please find the answer file below:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DiskConfiguration>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Extend>true</Extend>
                            <Order>1</Order>
                            <Type>Primary</Type>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Active>true</Active>
                            <Format>NTFS</Format>
                            <Label>System</Label>
                            <Letter>C</Letter>
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>0</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Extend>true</Extend>
                            <Order>1</Order>
                            <Type>Primary</Type>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Active>true</Active>
                            <Format>NTFS</Format>
                            <Label>DB_Data</Label>
                            <Letter>D</Letter>
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>1</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Extend>true</Extend>
                            <Order>1</Order>
                            <Type>Primary</Type>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Active>true</Active>
                            <Format>NTFS</Format>
                            <Label>Image_Data</Label>
                            <Letter>E</Letter>
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>2</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
            </DiskConfiguration>
            <ImageInstall>
                <OSImage>
                    <InstallTo>
                        <DiskID>0</DiskID>
                        <PartitionID>1</PartitionID>
                    </InstallTo>
                </OSImage>
            </ImageInstall>
            <UserData>
                <AcceptEula>true</AcceptEula>
            </UserData>
        </component>
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-US</UILanguage>
                <WillShowUI>Never</WillShowUI>
            </SetupUILanguage>
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Password>
                    <Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABQAGEAcwBzAHcAbwByAGQA</Value>
                    <PlainText>false</PlainText>
                </Password>
                <Username>Administrator</Username>
                <Enabled>true</Enabled>
            </AutoLogon>
            <FirstLogonCommands>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd /c wmic useraccount where "name='Administrator'" set passwordExpires=FALSE</CommandLine>
                    <Order>1</Order>
                </SynchronousCommand>
            </FirstLogonCommands>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABBAGQAbQBpAG4AaQBzAHQAcgBhAHQAbwByAFAAYQBzAHMAdwBvAHIAZAA=</Value>
                    <PlainText>false</PlainText>
                </AdministratorPassword>
            </UserAccounts>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
        </component>
        <component name="Microsoft-Windows-ServerManager-SvrMgrNc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
        </component>
    </settings>
    <settings pass="generalize">
        <component name="Microsoft-Windows-ServerManager-SvrMgrNc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
        </component>
    </settings>
    <settings pass="auditSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Password>
                    <Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABQAGEAcwBzAHcAbwByAGQA</Value>
                    <PlainText>false</PlainText>
                </Password>
                <Enabled>true</Enabled>
                <Username>Administrator</Username>
            </AutoLogon>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABBAGQAbQBpAG4AaQBzAHQAcgBhAHQAbwByAFAAYQBzAHMAdwBvAHIAZAA=</Value>
                    <PlainText>false</PlainText>
                </AdministratorPassword>
            </UserAccounts>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:c:/coem/workbenchwin2008/iso/sources/install.wim#my win2008 san install" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
It doesn't work. System configurations are,
-> system with out build-in harddisk
-> there were 3 disks from SAN
-> you can see that disks 0, 1 and 2 are configured in diskconfiguration section.
After constructing new COEM with this answer file, when i boot the system via DVD disk, in some point in time, i get the following exception:
the
target disk, partition or voume doesnot support the specified operations.
The
error occured while applying the unattended answer file's <DiskConfiguration> setting. Error code 0x80300024
any help would be appreciated.
Thank you
Regards,
Saravanan

Want help with "Could not set up your CS Live account. Try again later."

Hi Folks
I've got an NFR of CS6 and I'm trying to give Adobe Story a shot.
Seems it requires online content and a CS Live account to do anything.
But when I try to create one it dies with the error message:
Account setup not completed
Could not set up your CS Live account. Try again later.
Can you help?
Joe
UPDATE: Downloaded update and that fixed things.
However, turns out my NFR of CS6 Production Premium doesn't allow me to use Story.
And here all I wanted to to do try out the transcription features of Premiere Pro.
Without a script it's complete gobbledygook. Would like to try it with a script but it appears I need Story to convert my PDF to Adobe Story format.
Oh well.

I ran into the same problem you did, Joe. I just realized Story is all online now. Story.Adobe.com

Error 1402: Could not open key: HKEY_LOCAL_MACHINE... During Installation

Hello,
When I try to install LabView (v7.1 or v8.0) I get the following error:
"Error 1402: Could not open key:
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\LVDB.Application\CLSID. Verify that
you have sufficient access to that key, or contact your support
personnel."
I have full administrator privileges on my computer and I am able to
modify that key manually using the registry editor. When I click the
"Yes" button to continue the installation it will complete but then
when I launch LabView I get the following error:
"The requested feature is unavailable on "localhost"".
Can you help me get LabView up and running?
Thanks,

The Adobe knowledgebase article actually pointed me in the right
direction and I was able to solve the issue. Thanks to all who gave
advise, you guys are the reason these forums work!
The error message was actually coming from the Microsoft Installer, not
from anything related to National Instruments. Also, ironically, what
the message said was spot on with one exception, while I personally had
access to the registry key, the installer didn’t. What I ended up doing
was going into the registry using regedit and setting the permissions
on the key in questions such that “Everyone” had full access. After
that I uninstalled LabView then reinstalled and it worked fine this
time. The step by step follows:
1) Open the registry editor by selecting "Run" from the start menu and then typing in "regedit".
2) Browse through the registry and select the entry mentioned in the error message.
3) Choose "Permissions..." from either the edit menu or by right-clicking on the registry key's parent directory.
4) Click the "Advanced" button to add a new user.
5) Type in "Everyone" as the new user and click OK (it may not be
necessary to give everyone full control but this is what I did and it
worked).
6) Configure the permissions for user "Everyone" to "Full Control"
7) Uninstall LabView (if necessary) and re-install.
Best regards,
-Ben

Re: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server

Hi,
I'm encountering an issue with "Named Pipes Provider, error: 40 windows" and am having problems determining how to fix it due to the environment I'm using. I have two SQL Servers installed on two separate Win2K3 Server boxes, one is SQL Server 2000 and the other is SQL Server 2005. The SQL Server 2000 contains the actual application data. The 2005 database is used only for Reporting Services. I've set up the reports on SSRS such that their datasources hit the 2000 server. This is using SQL Server authentication.
When testing the reports via SSRS (in Visual Studio 2005), the connection to the data works and the reports are generated fine. When I deploy them to the reporting server and launch IE to test locally (still on the 2005 box), I get this "Named Pipes Provider, error 40" issue. I made sure that Named Pipes and TCP were enabled and the port set at 1433 (to match that on the 2000 box).
Now I changed the datasource's authentication from SQL Server to Windows authentication. I tested this in SSRS and this works too. When I redeployed the reports with this authentication change, testing the reports via IE locally (on the 2005 box) worked. Great. Now when I open IE on an external box, i.e. on the 2000 box, and try to test the reports, I get this same error 40 issue. I've been through a few threads describing the error 40, fiddling around with the SQL Server configuration as well as SSRS, to no avail. I have a feeling this error 40 issue has to due with permissions/authentication between the SQL Server boxes but I can't really be sure. Anyone have any ideas on how to troubleshoot my situation. Thanks.
larry

Named Pipes Provider, error: 40 - Could not open a connection to SQL Server :
I. Incorrect connection string, such as using SqlExpress.
Check out: http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=558456&SiteID=17
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1245564&SiteID=1
The typical error when dealing with Express includes:
a. User is not aware of SqlExpress was installed as a named instance, consequently, in his/her connection string, he/she only specify ".","localhost" etc instead of ".\SqlExpress" or "<machinename>\Sqlexpress".
b. Np was disabld by default after installing SqlExpress.
c. If Sqlexpress was installed on the remote box, you need to enable remote connection for Express.
Please read the following blog for best practice of connecting to SqlExpress.
http://blogs.msdn.com/sql_protocols/archive/2006/03/23/558651.aspx
II. Named Pipes(NP) was not enabled on the SQL instance.
Check out: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=136253&SiteID=1
Oppose to SQL 2000 which turn on all protocols, SQL 2005 SKUs turn off NP by default. So, when you see this error, please check:
1) Go to SQL Server Configuration Manager, See Server has NP enabled.
2) %windir%\program files\microsoft sql server\mssql.1\mssql\log, notepad ERRORLOG, see whether Server is listening on NP. You should see "Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ] or [\\.\pipe\mssql$<InstanceName>\sql\query]"
3) Notice that "sql\query" is the default pipe name, so you need to know server is listening on which pipe name. eg: if you specify server pipe name is "sql\query1", then you would see in the errorlog that server listening on [ \\.\pipe\sql\query1 ], and go to SQL Server Configuration Manager, click client Named Pipe properties, see whether the pipe name is same with the one server listening on.
4) If you are using SQL Native Client ODBC/OLEDB provider({SQL Native Client} or SQLNCLI), go to SQL Configuration Manager, click client protocols, make sure NP and TCP are both enabled. Right click properties of NP, make sure client is using the same pipe name as server for connection.
5) If you are using MDAC ODBC/OLEDB({SQL Server} or SQLOLEDB) provider, in command line, launch "cliconfg.exe" and make sure NP enabled and right pipe name specified.
III. Remote connection was not enabled.
Check out: when you right click on the Server in SQL Server Management Studio, in Connections, the Remote server connections part, you have enabled the "Allow remote connections to this server" check box
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=322792&SiteID=1
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=763875&SiteID=1
If you are making a remote connection, namely, your target SQL Server is on the different box as client application, you might need to check whether:
a. "File and Printer Sharing" was opened in Firewall exception list.
b. Please see the blog for enabling remote connection for express and troubleshooting tips of remote connection.
http://blogs.msdn.com/sql_protocols/archive/2005/11/14/492616.aspx
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
IV. Server not started, or point to not a real server in your connection string.
Check out: Open SQL Server Surface Area Configuration and ensure all the required services are started, Remote Connections are configured.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=348662&SiteID=1
a. use "sc query mssqlserver" for default instance or "sc query mssql$<instancename>" to make sure SQL Server was started. Sometimes, reseason behind the broken of your client application w/ this error:40 might be SQL server restarted and failed, so, it'd better for you to double check.
b. User specified wrong server in their connection string, as described in the forum discussion, "MSSQLSERVER" is an invalid instance name. Remember, when you connect to default instance, <machinename> could be best representitive for the instance, when you connect to a named instance such as sqlexpress, you should specify <machinename>\<instancename> as data source in your connection string.
V. Other reasons such as incorrect security context.
Check out: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=192622&SiteID=1
Such error also occured during user operation such as moving database or db mirroring or cluster, any DB OP that might invovle different sql instances, namely, the destination database is located in another sql instance and user is not aware of the state of the destination. I recommend you first isolate whether this fail is during connection stage or data operation stage.
a. During data operation, you are normally asked to type in the destination server name whether it is default to "(local)" or another server "<remotemachinename>". So, remember the exact string that represent the target instance, then when the error repros, open command line, use "sqlcmd -S<representitive> -E" ,see what happens, if the connection fail, please follow up above I - IV troubleshooting lists. otherwise continue.
b. If you can make basic conection, but still face the error, then there must be something that server reject the connection or client close the connection for some reason.
VI. Please try basic connectivity tests between the two mahcines you are working on. One simple way to verifty connectivity is to use command line tools, such as osql.exe. For example, osql -E -Stcpervername\instancename. If it connects cross-machine successfully, please also verify that your connection string in your scenario is correct.
Here are some blogs which could be helpful: just follow the basic connectivity troubleshooting guidelines on the SQL Protocols blog, see:
SQL Server 2005 Connectivity Issue Troubleshoot - Part I
http://blogs.msdn.com/sql_protocols/archive/2005/10/22/483684.aspx
and
SQL Server 2005 Connectivity Issue Troubleshoot - Part II
http://blogs.msdn.com/sql_protocols/archive/2005/10/29/486861.aspx
Hope this helps.

Error HRWPC_FC_EXEC - could not start transaction

Hi, am getting error when access MSS ePortal a particular transaction give me the error HRWPC_FC_EXEC - could not start transaction, and other transactions are working fine. Any one pls advise how to check and we miss anything?
thanks in advance.
Regds

Hello,
Please set parameter ~webgui_theme with value "sl" in the HRWPC_FC_EXEC service under GUI configuration. That you will find in the interactive options of service data. After saving this service please also run the transaction SITSPMON -> Templates and Mimes -> go to "Invalidate cache" and select System wide/Application server.
Hope it helps,
Christine

ASPNETCOMPILER error ASPCONFIG Could not load file or assembly Oracle.Data

I have migrated my .Net solution from 3.5 to 4.0 which consist of a class library and a web service. Web serivice is dependent on class library and the class library uses oracle.dataaccess.dll version 4.112.3.0. I have installed ODAC 11.2.0 in my machine.
When I try to build the solution using MSBUILD.EXE I am getting the below error on my build machine.
ASPNETCOMPILER : error ASPCONFIG: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. An attempt was made to load a program with an incorrect format. [D:\VEROS_BuildFolder\CDDS_MERGE_CODEDROP_.NETUPGRADE\WEB Services\AppraisalSubmission\AppraisalSubmissionService.metaproj]
And I try to build from VS2010, it is building successfully.
But we need to build only using MSBUILD.EXE which resides in "C:\Windows\Microsoft.NET\Framework\v4.0.30319" path. While building using MSBUILd.EXE the Oracle.DataAccess.dll is getting copied into the BIN folder of the web service. It should reference from GAC location. My build serveer is 64 bit win2008 server. when I checked the dll version install using GACUTIL , I got the below result
C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin\NETFX 4.0 Tools>gacutil /l oracle.dataaccess
The Global Assembly Cache contains the following assemblies:
oracle.dataaccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=AMD64
oracle.dataaccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=AMD64
oracle.dataaccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Previous the application was building successfully using framework 3.5 and Oracle.DataAccess.dll version 2.112.3.0.
Please help to build my applicaiton using MSBUILD 4.0 version.

Typically, when you get the "load a program with an incorrect format" exception, it's a mismatch in the bit-ness of the Oracle client you're using and the project you're building. By default, .net builds in AnyCPU mode. That means if you do it on a 64 bit system, you'll get a 64 bit (x64) program. That doesn't work with a 32 bit Oracle client. Usually, you'll need to force MSBUILD to build a 32 bit (x86) result. That will use the 32 bit Oracle client successfully. There's probably a command line switch for that. When building in Visual Studio, you can do it from the Build > Configuration Manager menu.
Now in this case it looks like you actually have both 32 and 64 bit versions of Oracle.DataAccess in the GAC, so I'm not sure if you have both Oracle clients or not. If you have one in the \bin with Copy Local = True, you could be getting the wrong one. You'll want to set Copy Local = False on the properties of the reference and remove that file from the \bin.

Microsoft.WebApplication.targets 182 5 error MSB3030 Could not copy the file because it was not found

We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
update.
<package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
<package id="angularjs" version="1.2.23" targetFramework="net451" />
<package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
<package id="angularjs" version="1.3.8" targetFramework="net451" />
After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
Task "Copy" (TaskId:395)
16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS.
Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
<Content Include="Scripts\angular-animate.js" />
<Content Include="Scripts\angular-animate.min.js" />
<Content Include="Scripts\angular-aria.js" />
<Content Include="Scripts\angular-aria.min.js" />
<Content Include="Scripts\angular-cookies.js" />
<Content Include="Scripts\angular-cookies.min.js" />
<Content Include="Scripts\angular-csp.css" />
<Content Include="Scripts\angular-loader.js" />
<Content Include="Scripts\angular-loader.min.js" />
<Content Include="Scripts\angular-messages.js" />
<Content Include="Scripts\angular-messages.min.js" />
<Content Include="Scripts\angular-mocks.js" />
<Content Include="Scripts\angular-resource.js" />
<Content Include="Scripts\angular-resource.min.js" />
<Content Include="Scripts\angular-route.js" />
<Content Include="Scripts\angular-route.min.js" />
<Content Include="Scripts\angular-sanitize.js" />
<Content Include="Scripts\angular-sanitize.min.js" />
<Content Include="Scripts\angular-scenario.js" />
<Content Include="Scripts\angular-touch.js" />
<Content Include="Scripts\angular-touch.min.js" />
Is there anything I forgot to mention that would help me figure out what is going on?
What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
Thank you very much in advance!
-Igor
-Igor

Hi Igor,
For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error - Delivery date not set. Notify your system administrator - TcodeKKS1

Hi,
While using Tcode - KKS1 we are getting the Error - "Delivery date not set. Notify your system administrator" for two Production orders. I have checked all the date fields in Production order. What could be the reason for this.
Timely help will be highly appreciated.
Thanks is advance
Narayanan

Hi,
check SAPNET note 83914 and related notes.
best regards, Christian

I continue to recieve the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe photoshop elements 13 software that I purchased.

I continue to receive the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe Photoshop elements 13 software that I purchased.

cancel the akamai download and download files 1 of 2 and 2 of 2 directly. put both in the same directory and double click the exe to start installation.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Change Own Data - System error: query could not be found

Hi Experts,
Please help me on the above issue.
Change Own data is not working in QA environment. Configuration changes related to Change own data does not prompt for a transport request. I have trasnsported T77WWW_WHO entries to QA.
Here is the table entry.
08     /SAPQUERY/HR_XX_PA_ESS     Y ESS_WHOS_WHO GB     SY000000000142     SY000000000143
I dont have any clue about this issue. No ST22 dump is also generated.
Thanks in advance.
Cheers
Jay

Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
System error: query could not be found
System error: query could not be found:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: System error: query could not be found
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
     at com.sap.xss.hr.cod.FcCodBusinessLogicComp.callRFCGetDetails(FcCodBusinessLogicComp.java:480)
     at com.sap.xss.hr.cod.FcCodBusinessLogicComp.onInit(FcCodBusinessLogicComp.java:228)
     at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicComp.onInit(InternalFcCodBusinessLogicComp.java:512)
     at com.sap.xss.hr.cod.FcCodBusinessLogicCompInterface.onInit(FcCodBusinessLogicCompInterface.java:115)
     at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface.onInit(InternalFcCodBusinessLogicCompInterface.java:147)
     at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface$External.onInit(InternalFcCodBusinessLogicCompInterface.java:227)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.cod.start.VcCodStartComp.onInit(VcCodStartComp.java:196)
     at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartComp.onInit(InternalVcCodStartComp.java:156)
     at com.sap.xss.hr.cod.start.VcCodStartCompInterface.onInit(VcCodStartCompInterface.java:161)
     at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartCompInterface.onInit(InternalVcCodStartCompInterface.java:144)
     at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartCompInterface$External.onInit(InternalVcCodStartCompInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

[Apache 2] Critical error mod_rewrite: Could not set permissions on rewrite

Similar Messages

Maybe you are looking for