API for PO freeze/unfreeze, hold/release hold, open, open for invoice

I know there is PO_ACTIONS.CLOSE_PO API which allow us to close the PO. We need to Freeze, Unfreeze, HOLD, release hold, open, open for invoice and open for receiving standard purchase orders. Does anyone know the Oracle API which can do this jobs. Thanks in Advance.

Currently they are not available as public APIs. Is there are specific reason you are looking for them?
Edited by: Shivaraj on May 29, 2012 4:10 PM

Similar Messages

Microsoft Word for Mac Freezes During Time Machine Backup

Since upgrading to Lion, I have found that when Time Machine is performing a backup that word for Mac freezes. I have all software updates for both Mac and MS. Running on 17" MacBook Pro.
Any ideas?
This appears to be the same issue:
https://discussions.apple.com/thread/2403912?start=0&tstart=0
Thanks in advance.

The Time Machine backup data on the network device is corrupt. The first thing you should do, if that's your only backup, is to make another complete backup to a locally attached storage device. One backup is never enough to be safe. Network backups are less reliable than local ones.
After that, hold down the option key and select Verify Backups from the Time Machine menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
If you continue to get panics, erase the backup device. With an AirPort device, you do that from within the AirPort Utility application; see its built-in help for details. All backups will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the Time Machine preference pane. The first backup should be made over a wired connection, if possible.
If you still have problems after erasing the device, it should be replaced.

Any Oracle API to Finally Close, Freeze, Unfreeze and Hold POs or Releases.

I know there is PO_ACTIONS.CLOSE_PO API which allow us to close the PO. We need to Finally Close, Freeze, Unfreeze and HOLD Pos/Releases.
Does anyone know the Oracle API which can do this jobs.
Thanks in Advance.

PO_CLOSE API alowed me to finally close the PO.
Here is the script if anybody interested,
v_result := PO_ACTIONS.CLOSE_PO(
P_DOCID => v_header_id,
P_DOCTYP => 'PO',
P_DOCSUBTYP => 'STANDARD',
P_LINEID => NULL,
P_SHIPID => NULL,
--P_ACTION => 'CLOSE',
P_ACTION => 'FINALLY CLOSE',
P_REASON => 'ONP FINALLY CLOSE Request : ' || to_char(v_request_id),
P_CALLING_MODE => 'PO',
P_CONC_FLAG => 'N',
P_RETURN_CODE => v_return_code,
P_AUTO_CLOSE => 'N',
P_ACTION_DATE => sysdate,
P_ORIGIN_DOC_ID => NULL );
I am going to update the tables directly for HOLD/Freeze and Unfreeze action.

Releasing Holds using process order API in 11.5.8

Hi,
I am encountering a error when i try to release hold which has Criteria1 as Item and Criteria2 as Warehouse. When i try to release these kind of holds, i am getting the following error message 'Hold Source Not Found'. Please find part of the attached script.
Script
l_request_rec.entity_id := 32903577; -- Line_ID
l_request_rec.entity_code := OE_GLOBALS.G_ENTITY_LINE;
l_request_rec.request_type := OE_GLOBALS.G_RELEASE_HOLD;
l_request_rec.param1 := 1341; -- HOLD_ID
l_request_rec.param2 := 'I' ; -- ITEM_LEVEL HOLD
l_request_rec.param3 := 432633; -- Inventory_item_id
l_request_rec.param4 :='NOT_APPLICABLE';
l_request_rec.param5 := NULL;
l_action_request_tbl(1) := l_request_rec;
The following information is available in oe_hold_sources_all table for this Order Line Hold
HOLD_ID - 1341
HOLD_ENTITY_CODE - I
HOLD_ENTITY_ID - 432633 (Inventory_item_id)
HOLD_ENTITY_CODE2 - W
HOLD_ENTITY_ID2 - 86 (Organization_id)
Please advise on how to pass values to the process order API so that the hold can be released.
Appreciate your help.

Not sure whether works in 11.5.8 version..but can you try this ...
l_action_rec.operation_code = OE_Globals.G_RELEASE_HOLD;
     l_action_request_rec.param1 := 1341;-- l_action_rec.hold_id;
     l_action_request_rec.param2 := 'I'; --nvl(l_action_rec.hold_type_code,'O');
     l_action_request_rec.param3 := 32903577;-- nvl(l_action_rec.hold_type_id,
                         --l_action_request_rec.entity_id);
     l_action_request_rec.param4 :=&your_reason;-- l_action_rec.release_reason_code;
     l_action_request_rec.param5 := -&Your_comments; --l_action_rec.comments;
l_action_request_tbl(1) := l_action_request_rec;
Thanks
Nagamohan

Sales Order Line Hold Release from API

Hi Expecrts,
I need one help, by using pl/sql program i want to hold release sales order line, I can see the oe_hold_pub api. but it contain three release_hold procedures. Which one i can use? what parameter i need to pass for line level only. line level release_hold should not impact to header level holds.
if possible, please can you provide the api and its parameters.
Thanks
reddy

Put an audit trail on the ordered_quantity field and use oe_order_lines_all_ac1 view.
It will give you what you need.
Hope this helps,
Sandeep Gandhi

My Macbook screen freeze, only if i hold on it it'll stop until i stop holding and it will freeze again

My Macbook screen freeze, only if i hold on it it'll stop until i stop holding and it will freeze again

Standard troubleshooting from the manual: Try in sequence until problem is solved
Restart.
Reset. (Hold down those buttons not for ten seconds but until the Apple logo shows)
Restore from a backup.
Restore as new.
Take it to Apple.

How do you get of hold of anyone at Adobe for help? Cannot download Photoshop CC.

I could not update Photoshop CC from Creative Cloud desktop or online. I need Raw 8.3 to be compatible with Lightroom. It is impossible to get a hold of anyone at Adobe for help. Found their chat link once after much searching, someone finally answered then told me they were closing for the day and to call back the next day. Could never find the chat link again. Tried uninstalling PhotoshopCC because I saw that somewhere in the forum but still cannot download Photoshop CC. Got error code U43M1U49 and said to retry or contact customer support. Yeah right! Totally frustrated with Adobe. Anyone have any suggestions?

Triste wrote:
I update application manager and was able to load Adobe Premier CC from on
line upload center. When I tried to update more apps from the desktop CC,
still failed. Tried to update Adobe Premier CC from help, mostly worked,
but got an message to close LogTransportApplication which I could not find,
did not show in my Task Manager when tried to find it, so could not update
Premier CC. Updates still failed from desktop Adobe CC.
Hi Triste,
If you're having difficulties getting updates for your tools using the Creative Cloud Desktop app, then you can try downloading them without it by using the direct links for the CC updates on Windows or on Mac OS, for all CC apps.

API or interface table to create releases for a blanket purchase agreement

Hi
I need to know if Oracle provides a standard API or interface table to create releases for a blanket purchase agreement.
I tried using the release_num field in PO_HEADERS_INTERFACE, PO_LINES_INTERFACE. But this is not working.
I'm able to create the blanket purchase agreement using the open interfaces, but not the releases.
Regards,
Alister

Hi Alister,
You can't create a release of a BPA through API, there is no such APIs provided by oracle.
Where as you can create a BPA by using API. You need to dump/poplulate data in PO_headers_interface & PO_Lines_intreface table.. Then use Purchasing Documents Open Interface API to create a BPA.
Regards,
S.P DASH

"You need to restart your computer. Hold down the power button for seve..."

Hello,
I have recently been getting this same message "You need to restart your computer. Hold down the power button for several seconds or press the Restart button." whenever I start up my computer. It happens about 95% of the time. I have been reading on different forums that I should reset the PRam and the NVRam and I have been doing so and it does help as it does EVENTUALLY start up (sometimes takes me 5-10 min. to get it to start up).
I have also read that it may be the RAM that is loose, so I did check that and made sure that the ram is properly placed (which it is).
I don't know what else I can do. Should I reformat and reinstall Mac OS X?
Here is the exact error form the dump:
IOAPIC: Version 0x20 Vectors 64:87
AppleACPIPlatformExpert::start failed
panic(cpu 0 caller 0x55c095): "Unable to find driver for this platform: \"Macbook 2,1\".\n"@/SourceCache/xnu/xnu-1504.9.26/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called: <panic>

Well just got around to installing the new HDD and RAM yesterday, and I am sad to say... that the problem persists. :/
I reseated the memory and made sure they were in there properly, and I also installed the HDD and ran DiskUtility before I erased/reformatted and installed a fresh version of MacOSX Leopard, then updated to Snow Leopard.
As long as I am using my computer everything works fine, the problem occurs when the machine is shut off or put to sleep for a long period of time. Because when I shut it off and turn it right back on a few minutes later it works, or if I shut the lid and open it 10-20 min. later everything works fine, it's only when the machine is off or asleep for long periods of time.
So, I do not know what else can be wrong.
Should I try to take out the old RAM and just leave the new module in and see if that works out? See if that specific module is faulty?

Function of HOLD DATA in the settings for creation of a new screen.

Hi,
Since i'm new to ABAP and still learning my way through, i would really appreciate if somebody can help me out with the exact functioning of selecting the check box 'HOLD DATA' under the settings option while creation of a new screen.
Thanks for any help extended.

Take simple scenario of SE38. The Screen for the transaction has the Flag "HOLD DATA" as Ticked.
Now enter some program name on the field and Click - Utilities-> User Profile -> Hold data.
Now come out of the transaction, go back to the same transaction. The name of the Program that you entered earlier will appear on the input field.
So if the screen doesn't have "Hold Data" set the functions of HOLD data, SET DATA, DELETE data will not work.
Also try using SET DATA For the Program input field.
SAP Help :
If you activate this option, the following functions are supported for the screen at runtime:
System -> User profile -> Hold data
-> Set data
-> Delete data
The Hold data function allows you to hold onto any entries you have made on the screen. When the screen is next processed (even in a different mode), the system then automatically redisplays the data in the input fields.
If the option is not activated, these functions are ineffective at screen runtime.

I have reset my iphone 5c and now has apple logo on the screen. I have tried holding home and lock buttons for 10 seconds, but to no avail. How do i sort this please ?

I have reset my iphone 5c and now it has the apple logo on the screen. Nothing is happening, apart from the screen going off for a few seconds, only to go back to black screen and white apple log. I have tried holding home and lock buttons for 10 seconds, but to no avail. I did a reset on settings as the IOS 8 was just slowing down my phone horrendously. How do i sort this please ?

Hi MartinH78,
If your iPhone isn't responding or won't start up past the Apple logo, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Not responding or does not turn on
Regards,
- Brenden

Hi I was using whatsapp on my iPhone5.I was not able go to the main menu by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black

I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?

Hello monicaa003,
Thanks for participating in the Apple Support Communities.
If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
About Siri - Apple Support
If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best Regards,
Jeremy

HT1589 is holding down shift not working for anyone else?

is holding down shift not working for anyone else?

There has been an outage for both iMessage and FaceTime today. Started at around Noon time, PDT.
Click below for Apple's System Status:
http://www.apple.com/support/systemstatus/

Looking for an iPad 2 case that holds notepad.

Hello,
I am looking for an iPad 2 case that holds notepad.
But I would like it thin. Not a big puffy leather case.
anyone know of any?
thanks

Try this case (from the Apple Store - U.S.):
http://store.apple.com/us/product/MD454LL/A/ipad-smart-case-polyurethane-dark-gr ay?fnode=3b
... and simply use the Notes app on your iPad to house your notes!

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period. Help?

Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964

API for PO freeze/unfreeze, hold/release hold, open, open for invoice

Similar Messages

Maybe you are looking for