App store is taking too long to make purchases
After updating to IOS7, my App Store purchases are taking a long time to download. Any ideas why?
I did it several times. I even had my local Apple Store reset the entire device. Still experiencing this issue.
Similar Messages
-
The app store will not allow me to make purchases with my paypal account
I tried to make a purchase from the app store using my paypal account but it told me that my purchase could not be completed. I have the funds in my paypal account so I don't know what the problem is.
App Store does not accept PayPal in all countries. The acceptable methods of payment for your country can be seen on your Account Information screen - and by editing your payment information.
-
Database open (recovery) taking too long
Hi,
Ive been using your awesome BerkeleyDB Java Edition for a couple of years, and have been very happy with it.
I am currently facing an issue with trying to open the database after a disk-full issue (which resulted in the database being unable to write, and hence not closed properly).
While recovery seems to be operating, it has been taking an inordinate amount of time - 16 hours so far. My database has data of around 200GB, which inflated to over 450GB during deletion of entries, hence gobbling up all free space on disk.
My questions are:
* Should i continue to wait for recovery?
* Is there any chance that recovery is looping?
* Is there an easier way (DBDump?) to extract data from the database without having to perform recovery?
Some other information that may help:
* The recovery has decreased the size of the last significant file, and created 3 new files since it started running.
* I have been monitoring the open files (using lsof), and they change every now and then to other files, though a good amount of its time is spent near the end of the database.
Thus, i feel like recovery is running normally, just taking too long. Please let me know your opinion.
A few other things i should mention regarding my issue:
* The database was, till yesterday, running on bdb java 3.3.75. After running several hours of recovery, i upgraded to 4.1.10 (since i read about a possible recovery looping bug in one of the versions)
* Once 4.1.10 started recovery, it spat out errors regarding the last 2 files. Only on deleting those 2 files (the last being 0 bytes, the 2nd-last being about 5k) did the recovery start. Note that the older 3.3.75's recovery never complained about those files. I can post the errors here if relevant.
* Some of the jdb files (about 500 files out of the 47,000 files that make up the database) are 100 MB files, since i had experimented with larger sized files for a few days, then reverted the setting.
Would any of these above affect a successful recovery?
My setup is:
OS:Linux CentOS 5.2, 64-bit, kernel 2.6.18-92.el5
JVM: Sun Java 1.6.0_20, 64-bit
Memory: 16 GB RAM, of which 8 GB is allocated to the java process (-Xmx8000M -Xms8000M)
BDB cache set to use 6GB RAM (envconfig.setCacheSize(6000000000))
Only the BDB basic API is being used (Environment, database, cursors). We do not use DPL, or HA features.
Awaiting your kind response,
Sushant AHi Sushant,
* Should i continue to wait for recovery?* Is there any chance that recovery is looping?>
I'm not aware of a bug that would cause recovery to loop, however, you may want to take thread dumps to see if it is progressing. It isn't easy to tell, however, since each phase of recovery is in fact a loop. What you can tell easily from the thread dumps is whether recovery is blocked (completely stopped) for some reason. I don't know of a bug that would cause this, but it's something I would check for.
Assuming it is not blocked, I suggest that you leave recovery running, and additionally (in parallel) try to obtain some information about your log. While recovery is running you can run the DbPrintLog utility, which does not itself run recovery. I suggest running the following command, which will tell us in general what your log looks like and in particular how far apart the checkpoints are:
java -jar je-x.y.z.jar DbPrintLog -h <envHome> -S > <output>Please post the output.
If checkpoints are not running in your application for some reason, or they are running very infrequently, this can cause VERY long recoveries. Unfortunately, you may have such a problem in your app and not be aware of it, until you crash and have to recover. To guard against this sort of thing in the future, you should keep an eye on the checkpoint frequency. EnvironmentStats.getNCheckpoints and getEndOfLog can together be used to tell how much log is written between checkpoints. We will also be able to see this from the DbPrintLog -S output.
* Is there an easier way (DBDump?) to extract data from the database without having to perform recovery?DbDump normally runs recovery. DbDump with the -r or -R option does not run recovery, but has other drawbacks. With -r, a large amount of memory may be necessary to dump an accurate representation of your data set. If this fails because you run out of memory, -R can be used, but this will dump multiple versions of each record and it will be up to you to interpret the output.
If regular recovery does not succeed, then DbDump -r is the next thing to try.
Would any of these above affect a successful recovery?No, I don't believe so.
--mark -
Discoverer report taking too long time to open.
HI,
Discovere reports are taking too long time to open. Please help to resolve this.
Regards,
BhatiaWhat is the Dicoverer and the Application release?
Please refer to the following links (For both Discoverer 4i and 10g). Please note that some Discoverer 4i notes also apply to Discoverer 10g.
Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362851.1
Note: 68100.1 - Discoverer Performance When Running On Oracle Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=68100.1
Note: 465234.1 - Recommended Client Java Plug-in (JVM/JRE) For Discoverer Plus 10g (10.1.2)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=465234.1
Note: 329674.1 - Slow Performance When Opening Plus Workbooks from Oracle 11.5.10 Applications Home Page
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=329674.1
Note: 190326.1 - Ideas for Improving Discoverer 4i Performance in an Applications 11i Environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=190326.1
Note: 331435.1 - Slow Perfomance Using Disco 4.1 Admin/Desktop in Oracle Applications Mode EUL
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=331435.1
Note: 217669.1 - Refreshing Folders and opening workbooks is slow in Apps 11i environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217669.1 -
WebI Report is taking too long time to opening
Hi All,
When iam trying to open the WebI report in Infoview , it is taking long time to open and refresh,
Please suggest me a solution.
Thanks in advance..
Regards,
MaheshHi,
As the issue you are facing is that the webi report is taking too long to open and refresh, I would recommend the below steps.
1. Check whether the webi report is set to "Refreh on Open" if yes probably you need to uncheck, save the report and open it again.
2. Try to run the same query in the backend database and see if it returns the data.
3. Try to run refresh the report for a smaller data selection.
4. make the report run on a specific webi server, and when refreshing have your BOBJ admin monitor that process to see if the process is going in a hung state, using High memory etc.
5. restart webi process and run again
Thanks,
aKs -
iphone 5 16 gn black my iphone is taking too long to download apps from apps to download on my iphone so please help from overcoming this problem
i just want to know this is the normal behaviour or it is some kind of problemYou have to turn on 3G/4G/LTE and be in a coverage area for such to happen.
Or connect to wifi.
Normal behavior for Edge is very very slow. -
Oracle - Query taking too long (Materialized view)
Hi,
I am extracting billing informaiton and storing in 3 different tables... in order to show total billing (80 to 90 columns, 1 million rows per month), I've used a materialized view... I do not have indexes on 3 billing tables - do have 3 indexes on Materialized view...
at the moment it's taking too long to query the data (running a query via toad fails and shows "Out of Memory" error message; runing a query via APEX though is providing results but taking way too long)...
Please advice how to make the query efficient...tparvaiz,
Is it possible when building your materialized view to summarize and consolidate the data?
Out of a million rows, what would your typical user do with that amount data if they could retrieve it readily? The answer to this question may indicate if and how to summarize the data within the materialized view.
Jeff
Edited by: jwellsnh on Mar 25, 2010 7:02 AM -
I am running a fairly complex query with several table joins
and it is taking too long. What can I do to improve performance?
Thanks.
FrankDan's first suggestion is key - if you are doing multiple
table joins, you want to make sure your indexes are set up on your
tables correctly. If you have access to the database, this should
be your first step. Rationalize's stored procedure suggestion is
also a great idea (again, if you have access to create and manage
stored procedures on your DB).
Other than than, most databases usually have some sort of SQL
efficiency analysis tool. SQL server has one built into their Query
Analyzer tool. I would recommend using something like that to
streamline your SQL. Like Dan said, something as simple as the
order of elements in your where clause might make a big
difference. -
Network event is taking too long (100%)
Hi everybody. We have a 10g DB on Windows. We're using OEM to manage the DB, and it has started to show an alert about database time spend waiting for "Network" event. It arises when we execute one module that updates several tables, that is taking too long. Before we had this app on 8i, also on Windows, and that operation was much more faster than now. The indexes on tables are valid, and I've gathered statistics for the CBO, so I suppose the problem is, as the OEM says, related with network, but I don't know why, because the connection speed is the same tan before, and the two machines are in the same LAN.
Any ideas??Here is the output requested:
SQL> select * from v$system_event
2 where event like 'SQL%';
EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED
AVERAGE_WAIT TIME_WAITED_MICRO EVENT_ID
SQL*Net message to client 1159200 0 252
0 2516408 2067390145
SQL*Net message to dblink 2234 0 1
0 5590 3655533736
SQL*Net more data to client 5753 0 166
0 1657387 554161347
EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED
AVERAGE_WAIT TIME_WAITED_MICRO EVENT_ID
SQL*Net more data to dblink 12 0 0
0 548 1958556342
SQL*Net message from client 1159181 0 218341084
188 2,1834E+12 1421975091
SQL*Net more data from client 23299 0 180602
8 1806015123 3530226808
EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED
AVERAGE_WAIT TIME_WAITED_MICRO EVENT_ID
SQL*Net message from dblink 2234 0 3693
2 36934861 4093028837
SQL*Net more data from dblink 4021 0 39
0 390002 1136294303
SQL*Net break/reset to client 182986 0 2740
0 27397165 1963888671
9 filas seleccionadas. -
Export PDF taking too long to upload to Adobe export online. Any suggestions?
I just recently purchased adobe exportPDF and I am trying to convert the PDF to word, but it is just taking too long even after opening multiple times.
Hi there Huapopicante,
How large/complex is the file that you're trying to convert? It may be that the file is too complex for the ExportPDF service to convert before timing out. Here are a few things that you can try, however:
Clear the browser cache and try again.
Make sure that you're using a supported web browser (http://www.adobe.com/acom/systemreqs/)
Try a different browser.
Make sure that there are no firewall/proxy settings that are limiting your access to the Internet.
Convert the PDF file from within Reader with OCR disabled, as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Please let us know how it goes.
Best,
Sara -
Data Archive Script is taking too long to delete a large table
Hi All,
We have data archive scripts, these scripts move data for a date range to a different table. so the script has two parts first copy data from original table to archive table; and second delete copied rows from the original table. The first part is executing very fast but the deletion is taking too long i.e. around 2-3 hours. The customer analysed the delete query and are saying the script is not using index and is going into full table scan. but the predicate itself is the primary key, Please help... More info below
CREATE TABLE "APP"."MON_TXNS"
( "ID_TXN" NUMBER(12,0) NOT NULL ENABLE,
"BOL_IS_CANCELLED" VARCHAR2(1 BYTE) DEFAULT 'N' NOT NULL ENABLE,
"ID_PAYER" NUMBER(12,0),
"ID_PAYER_PI" NUMBER(12,0),
"ID_PAYEE" NUMBER(12,0),
"ID_PAYEE_PI" NUMBER(12,0),
"ID_CURRENCY" CHAR(3 BYTE) NOT NULL ENABLE,
"STR_TEXT" VARCHAR2(60 CHAR),
"DAT_MERCHANT_TIMESTAMP" DATE,
"STR_MERCHANT_ORDER_ID" VARCHAR2(30 BYTE),
"DAT_EXPIRATION" DATE,
"DAT_CREATION" DATE,
"STR_USER_CREATION" VARCHAR2(30 CHAR),
"DAT_LAST_UPDATE" DATE,
"STR_USER_LAST_UPDATE" VARCHAR2(30 CHAR),
"STR_OTP" CHAR(6 BYTE),
"ID_AUTH_METHOD_PAYER" NUMBER(1,0),
"AMNT_AMOUNT" NUMBER(23,0) DEFAULT 0,
"BOL_IS_AUTOCAPTURE" VARCHAR2(1 BYTE) DEFAULT 'N' NOT NULL ENABLE,
"ID_USE_CASE" NUMBER(4,0) NOT NULL ENABLE,
"ID_AUTH_METHOD_PAYEE" NUMBER(2,0),
CONSTRAINT "CKC_BOL_IS_CANCELLED_MON_TXNS" CHECK (BOL_IS_CANCELLED in ('Y','N')) ENABLE,
CONSTRAINT "PK_MON_TXNS" PRIMARY KEY ("ID_TXN")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "LARGE_INDEX" ENABLE,
CONSTRAINT "FK_MON_TXNS_CURRENCIES" FOREIGN KEY ("ID_CURRENCY")
REFERENCES "APP"."CURRENCIES" ("ID_CURRENCY") ENABLE,
CONSTRAINT "FK_MON_TXNS_TO_PAYER" FOREIGN KEY ("ID_PAYER")
REFERENCES "APP"."CUSTOMERS" ("ID_CUSTOMER") ENABLE,
CONSTRAINT "FK_MON_TXNS_TO_PAYEE" FOREIGN KEY ("ID_PAYEE")
REFERENCES "APP"."CUSTOMERS" ("ID_CUSTOMER") ENABLE,
CONSTRAINT "FK_MON_TXNS_REFERENCE_TXNS" FOREIGN KEY ("ID_TXN")
REFERENCES "APP"."TXNS" ("ID_TXN") ENABLE,
CONSTRAINT "FK_MON_TXNS_TO_PI_PAYER" FOREIGN KEY ("ID_PAYER_PI")
REFERENCES "APP"."PIS" ("ID_PI") ENABLE,
CONSTRAINT "FK_MON_TXNS_TO_PI_PAYEE" FOREIGN KEY ("ID_PAYEE_PI")
REFERENCES "APP"."PIS" ("ID_PI") ENABLE,
CONSTRAINT "FK_MON_TXNS_TO_AUTHMETHOD" FOREIGN KEY ("ID_AUTH_METHOD_PAYER")
REFERENCES "APP"."AUTHENTICATION_METHODS" ("ID_AUTHENTICATION_METHOD") ENABLE,
CONSTRAINT "FK_MON_TXNS_USE_CASE_ID" FOREIGN KEY ("ID_USE_CASE")
REFERENCES "APP"."USE_CASES" ("ID_USE_CASE") ENABLE,
CONSTRAINT "FK_MON_TXN_AUTH_PAYEE" FOREIGN KEY ("ID_AUTH_METHOD_PAYEE")
REFERENCES "APP"."AUTHENTICATION_METHODS" ("ID_AUTHENTICATION_METHOD") ENABLE
CREATE INDEX "APP"."IDX_MON_TXNS" ON "APP"."MON_TXNS" ("ID_PAYER")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "LARGE_INDEX" ;
CREATE INDEX "APP"."IDX_PAYEE_MON_TXNS" ON "APP"."MON_TXNS" ("ID_PAYEE")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "LARGE_DATA" ;
CREATE INDEX "APP"."IDX_PYE_PI_MON_TXNS" ON "APP"."MON_TXNS" ("ID_PAYEE_PI")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "LARGE_DATA" ;
CREATE INDEX "APP"."IDX_PYR_PI_MON_TXNS" ON "APP"."MON_TXNS" ("ID_PAYER_PI")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "LARGE_DATA" ;
CREATE INDEX "APP"."IDX_USE_CASE_MON_TXNS" ON "APP"."MON_TXNS" ("ID_USE_CASE")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "LARGE_DATA" ;
CREATE UNIQUE INDEX "APP"."PK_MON_TXNS" ON "APP"."MON_TXNS" ("ID_TXN")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "LARGE_INDEX" ;
Data is first moved to table in schema3.OTW. and then we are deleting all the rows in otw from original table. below is the explain plan for delete
SQL> explain plan for
2 delete from schema1.mon_txns where id_txn in (select id_txn from schema3.OTW);
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 2798378986
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | DELETE STATEMENT | | 2520 | 233K| 87 (2)| 00:00:02 |
| 1 | DELETE | MON_TXNS | | | | |
|* 2 | HASH JOIN RIGHT SEMI | | 2520 | 233K| 87 (2)| 00:00:02 |
| 3 | INDEX FAST FULL SCAN| OTW_ID_TXN | 2520 | 15120 | 3 (0)| 00:00:01 |
| 4 | TABLE ACCESS FULL | MON_TXNS | 14260 | 1239K| 83 (0)| 00:00:02 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
Please help,
thanks,
Banka Ravi'Best practice' is just what Oracle is already doing as you have already been told: DELETE FROM myTable WHERE myDate between myStart and Myend.
Your use case is why many orgs elect to use partitioning and use that DATE column as the partition key. Then it is VERY FAST and VERY EASY to truncate or drop partitions that contain old data when you no longer need them.
The other solution used is to quit waiting so long to delete data and then you don't have to delete large amounts at the same time. So instead of deleting data once a month delete it once a week or even every night. Then the number of rows being deleted will be much smaller and, if the stats are kept current, Oracle may decide to use the index. -
HT5191 (Windows 7/64bit) iTunes Taking too long to Backup.
Hi guys/gurus/"i" masters,
Got a MAJOR issue with itunes. I don't know why this happens on windows but this is one issue i can't solve.
I'm on an iPhone 4s running ios 5.0.1. I want to backup all my stuff before I bring to the latest firmware (5.1.1)
I've had to force close the program many times as the backup was taking too long, and it didn't even move a bit (backup bar).
Can anyone please help me to resolve this issue.
Appreciate the help very much.
Regards,
TJB!Start by making sure you have the latest version of iTunes.
If that doesn't do it, you may be seeing something like what is described in this Apple article -> Apple software on Windows: May see performance issues and blank iTunes Store
If it's what you're seeing, you can try resetting Winsock as a temporary fix or folllow along with the article.
1. To do so, please do the following in an administrator user:
Windows Vista and Windows 7: Right click All Programs and choose Accessories > Command Prompt. Choose to open as an administrator.
Windows XP: Click Start > Run and type in cmd.
2. Enter the following command:
netsh winsock reset
3. Restart the computer and test the issue.
Note: If the issue returns, third-party software may be reinserting the LSP. -
My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Data manager jobs taking too long or hanging
Hoping someone here can provide some assistance with regard to the 4.2 version. We are specifically using BPC/OutlookSoft 4.2SP4 (and in process of upgrading to BPC7.5). Three server environment - SQL, OLAP and Web.
Problem: Data manager jobs in each application of production appset with five applications are either taking too long to complete for very small jobs (single entity/single period data copy/clear, under 1000 records) or completely hanging for larger jobs. This has been an issue for the last 7 days. During normal operation, small DM jobs ran in under a minute and large ones taking only a few minutes.
Failed attempts at resolution thus far:
1. Processed all applications from the OLAP server
2. Confirmed issue is specific to our appset and is not present in ApShell
3. Copied packages from ApShell to application to eliminate package corruption
4. Windows security updates were applied to all three servers but I assume this would also impact ApShell.
5. Cleared tblDTSLog history
6. Rebooted all three servers
7. Suspected antivirus however, problem persists with antivirus disabled on all three servers.
Other Observations
There are several tables in the SQL database named k2import# and several stored procedures named DMU_k2import#. My guess is these did not get removed because I killed the hung up jobs. I'm not sure if their existence is causing any issues.
To make the long story short, how can I narrow down at which point the jobs are hanging up or what is taking the longest time? I have turned on Debug Script but I don't' have documentation to make sense of all this info. What exactly is happening when I run a Clear package? At this point, my next step is to run SQL Profiler to get a look into what is going on behind the scenes on the sql server. I also want to rule out the COM+ objects on the web server but not sure where to start.
Any help is greatly appreciated!!
Thank you,
HiteshHi ,
The problem seems to be related to database. Do you have any maintenance plan for database?
It is specific for your appset because each appset has own database.
I suspect you have to run an sp_updatestats (Update Statistics) for your database and I think the issue with your jobs hang will be solved.
DMU_K2_importXXX table are coming from hang imports ...you can delete these tables because it is just growing the size of database and for sure are not used anymore.
Regards
Sorin Radulescu -
I can't view my website at www.artisancandies.com, even though it's working and everyone else seems to see it. No, I don't have a firewall, and it's not because of my internet provider - I have AT&T at work, and Comcast at home. My husband can see the site on his laptop. I tried dumping my cache in both Firefox and Safari, but it didn't work. I looked at it through proxify.com, and can see it that way, so I know it works. This is so frustrating, because I used to only see it when I typed in artisancandies.com - it would never work for me if I typed in www.artisancandies.com. Now it doesn't work at all. This is the message I get in Firefox:
"The connection has timed out. The server at www.artisancandies.com is taking too long to respond."
Please help!!!
Kristen ScottLinc, here's what I've got from what you asked me to do. I hope you don't mind, but it was simple enough to leave everything in, so you could see the progression:
Kristen-Scotts-Computer:~ kristenscott$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Kristen-Scotts-Computer:~ kristenscott$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.adobe.versioncueCS3
Kristen-Scotts-Computer:~ kristenscott$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.google.keystone.root.agent
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
Kristen-Scotts-Computer:~ kristenscott$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
Adobe AIR.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Disabled Plug-Ins
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
Google Earth Web Plug-in.plugin
JavaPlugin2_NPAPI.plugin
JavaPluginCocoa.bundle
Musicnotes.plugin
NP-PPC-Dir-Shockwave
Quartz Composer.webplugin
QuickTime Plugin.plugin
Scorch.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.google.keystone.agent.plist
/Library/LaunchDaemons:
com.adobe.versioncueCS3.plist
com.apple.third_party_32b_kext_logger.plist
com.google.keystone.daemon.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
VersionCue.prefPane
VersionCueCS3.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
/Library/ScriptingAdditions:
Adobe Unit Types
Adobe Unit Types.osax
/Library/StartupItems:
AdobeVersionCue
HP Trap Monitor
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Internet Plug-Ins:
Move_Media_Player.plugin
fbplugin_1_0_1.plugin
Library/LaunchAgents:
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
Library/PreferencePanes:
A Better Finder Preferences.prefPane
Kristen-Scotts-Computer:~ kristenscott$
Maybe you are looking for
-
APPLE: We Need An Upgrade Price for Logic Pro X!!!
There has always been an Upgrade path for Logic Pro. Where is it???
-
Running Windows 2000 and Firefox 3.6 Email does not do search in address field when replying to a sender. Have to manually type each address...
-
Dear Experts, I couldn't able to open NWCE portal which is showing " Couldn't connect to db" Plz find the below attachment( log file) Start: Mon Mar 05 11:24:17 IST 2012 Error: Couldn't connect to DB java.sql.SQLRecoverableException: ORA-01034: OR
-
Workflow Manager Configuration Issue Windows Server 2012 R2 / SQL 2014
Hello All, Environment: SharePoint 2013 Enterprise with SP1 Farm consists of 2 App Server, 2 Web Server and 2 SQL Servers all the server have Windows 2012 R2 OS . The SQL backend is SQL Server 2014 Installed Workflow manager on the Web server, th
-
i got an 8GB nano from my friend but when i plug it in to my mac it says i need Mac OS version 10.4.8 and i only have 10.3.9 and am not looking to upgrade. is there a way to reset the ipod so itll work with an older OS?