Apparently I exported my Lightroom Catalog out of Lightroom and now my entire Library of photos are gone.

To continue with this; I have found the catalog in a pictures file I was working on.
After researching the problem, I have gone into
LR <Files
<New Catalog
< then highlighted the .lrcat file
<and double clicked to launch and restore in LR, however no sucess.
Anyone experienced this? Also is there a phone# for help on this site?
Thank you!

To me it sounds like what you're actually doing is overwriting your existing catalog with a new blank one.
To open an existing catalog you need to go (in LR) to File, Open Recent and then select the name of the file.
My only fear is that you've already over-written the existing File with the File, New, select existing File, Double click......chain of events.
File, New is to create a New catalog.  If you select an already existing file then you'll just overwrite it.
If this is the case ou need to go back to your back-up catalogs, preferably the most recent one.

Similar Messages

  • IOS5.0.1 constant error "iPhone can not make or receive calls.  Restore from iTunes":  I get this message and the phone will no longer work (happend once while on airplain mode and now once while in wifi only area, out of cell range).  help!

    All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4.  Newest OS.  Never happened with old OS! Cycling phone on/off does not help.  Ignoring message causes phone to cycle off then on.  After first time this happened, I restored.  Six days later...same problem!  Clearly a new fix is necessary.  Suggestions? 

    I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc).  Any suggestions?  What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?

  • I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup

    I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup in itunes or on my computer

    Did you fail to import them to your computer before restoring?
    Not good.
    They are likely gone.
    You can try restoring from backup.

  • I had water damage to my iphone5 when I was deployed w/ the military overseas. How can I find out what saved to icloud and how to see where my photos are. I don't know when it was able to back up as wi fi was pretty sketchy. please advise. thx in advance

    I had water damage to my iphone5 when I was deployed w/ the military overseas. How can I find out what saved to icloud and how to see where my photos are. I don't know when it was able to back up as wi fi was pretty sketchy. please advise. thx in advance
    My iphone is toast, I know I checked on icloud and see my emails from the day before it happened. Can I see when and what my phone backed up through itunes or icloud?
    Please please help i am lost.

    This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
    This is a picture of what it looks like now:
    http://tinypic.com/r/107quxu/7
    As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
    any way to get around that?

  • When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of CC and now it isn't editing photos!  HELP please required.

    When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of Photoshop CC and now it isn't editing photos!
    Lightroom opens up Photoshop but the image doesn't appear!  Any help gratefully needed!

    Ok I sorted it, by uninstalling and re-installing Photoshop

  • HT1390 I just rented a movie on itunes but I don't know how to make it play.  I clicked out of itunes and now when I go back into itunes, I don't see a way to play the movie I just downloaded.  Help.

    I am a new at this.  I just rented and downloaded a movie, clicked out of iturnes and now when I go back into itunes, I don't see a way to play the movie that I just downloaded ten minutes ago.  I just want to watch it on my laptop.
    Help.

    Welcome to the Apple Community Vane_paranormal.
    If you rent a movie on your phone, you have to watch it on your phone, likewise if you rent it from the Apple TV you will have to watch it there.
    If you want to watch a rental on multiple devices, rent it from a computer.

  • I logged out of itunes and now itunes will not allow me to sign in completely.  anyone know what i can do? i've already re-installed itunes

    i logged out of itunes and now itunes will not allow me to sign in completely.  anyone know what i can do? i've already re-installed itunes. 
    It will not allow me to back up my phone on my itunes either. 

    Try disable all restrictions
    Settings>General>Restrictions

  • My IPhone 5S ran out of battery and now won't unlock

    Hey guys
    My Iphone 5S ran out of battery and now it won't accept my fingerprint or my password when I try to unlock it. If any one has any idea how to sort it would be much appreciated.
    Cheers
    Josh

    Thanks Eric, but it's not a power issue. Tried different chargers and usb cables in a wall outlet and computer etc. It doesn't seem to recognize that it is in fact plugged to a power source. I get the low battery icon w/ the plug + bolt icon as if it needs to be plugged in but it already is...
    iTunes doesn't see it either..

  • Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. When I open the contact, I can only see 3 contact names and the rest of 4000  contacts are not listed

    Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact

    The iPhone remembers information about previous contacts.
    Complelely independently, you have a Contacts app with a contacts list.  It sounds like your contacts list has 3 names on it.  You need to add a few names.

  • TS1702 Have the game "The Simpson's tapped out" on Ipad and now every time you touch a character, it jumps out, not even generating the money collected, thus having to do this over and over again! Now, look on itunes for the game itself & not there!?! Hel

    Have the game "The Simpson's tapped out" on Ipad and now every time you touch a character, it jumps out, not even generating the money collected, thus having to do this over and over again! Now, look on itunes for the game itself & not there!?! Help!

    I can not find out a way to finish this game.....Is
    there anyone can help me?You can finish the game by calling System.exit(0).
    Have you found a way to start the game?

  • I rented a film. Went out of it and now i cant get back in??

    I rented a film. Went out of it and now i cant get back in??

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • HT4061 My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Please help me....
    My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Hello Jesslocko,
    Before following the iPad Restore process make sure you have updated version of iTunes installed on your computer, to check that Open iTunes on your computer click on Help and then check for updates ( If there is any updates available then Install it ) and If you do not have iTunes Installed or if you want to directly update the version of your iTunes then Download and Install iTunes from here : http://www.apple.com/itunes/download/
    1. Make sure your device (iPad) is unplugged (Disconnected) from your computer (this should be the computer that you use to sync your iPad or you can use any other computer with iTunes installed in it). You can leave the USB cable connected to your iPad though.
    2. Turn off your iPad. Press and hold the power button on the top edge until a slider appears. Slide it from left to right to power off your device. If the slider doesn't appear (because your iOS device has frozen up) then hold the power and Home buttons down until the iPhone or iPad turns off.
    3. Ensure your device has a decent amount of charge. Leave it plugged in to the mains for 10 minutes or so if you see the flat battery icon. (iPad low battery)
    4. Hold down the Home button (the round button at the bottom of your iPad screen) and connect the other end of USB cable to the computer this should cause your iPhone or iPad to turn on. Keep holding the Home button until you see the iTunes and USB cable images on your iPad screen, then release the button.(iPad recovery mode)
    5. In iTunes (launch the application if it isn't running on your Computer), you should see a message saying an iPad has been found in recovery mode.
    6. Click OK and then click on Restore to bring your iPad to Factory settings

  • Color change on exporting from lightroom and saving in Photoshop CS5

    I have been having issues with my pictures with color management.    I have Lightroom 4 and Photoshop CS5.  I thought over the last 2 years that it was just me.   I have bought a Eizo monitor with a hood, calibrate with a i1display pro, painted my walls gray, updated my strobes from alien bees to elinchrome bxri's.   Updated my sekonic meter to a L 758.   Have done custom white balance with gray card, expodisc, xrite kits.   The problem has been over the years when I work on a picture in lightroom and export it as jpeg or adobe rgb it gets saved to my external hardrive and the colors are really bad !!   You can go back and compare the picture in lightroom to the picture on my iomega external drive and there is a significant difference.   I do some animal photography and I had a dog that had brown fur and when I export it out of lightroom the dogs fur is actually a bright very orange color.  Same thing happens with skin tones.     When I import the photos into lightroom the pictures look ok.       The same thing is happening when I go from lightroom to photoshop the picture color looks good but when I go to File-save as - tiff or jpeg the colors are changing.   It does not matter what color space I am in I have tried them all it is still happening.    If anyone has any insight that would be great.  
    Teresa

             Thanks everyone for the help.   I have only been doing photography for about 2 years and the color managment part has been my hardest thing to get right.   My monitor ColorEdge CG243W LCD.   Wide color gamut of 98%.  Has a sensor on front of monitor that detects ambient brightness but this will only work if you are in a custom color mode.  Modes are: custom,  sRGB,DCI,EBU, Cal1.   I use the Cal 1 to be able to use the Colornavigator software that came with the monitor.  You also have to be in custom color mode to be able to manually adjust brightness, contrast, temperature on the monitr itself which I do not use because I use the Cal 1 mode.   I was not sure about the digital input signals.   I am on the DVI-I in which this allows digital signal input and analog signal input.    There is a DVI-D mode that allows only digital input only.    Also did not know if I needed to be concerned about setting the frequency that corresponds to the grahic board in the monitor ?    My bandwith was set to normal and now is on wide.   My digital input is for 1920x1200 resolution.   Appicable signal is Vesa CVT RB.  Frequency is 60 Hz.   Yes I did call Eizo twice last year when I got my monitor and did not get very far.     I have also called and spoke to a color specialist at my lab and told him the problems I have been having and he just told me to leave everything in sRGB.   Well I would like to get the most from my monitor's color gamut and when working on my pictures so that is why I am still determined to get this figured out.  
    I use the i1 Dislpay Pro hardware to calibrate with and the ColorNavigator software.     When calibrating.   I go to create a new target---select enter manually--Gamut ( monitor native--states recommended)--Brightness 100cd---White point (6500k)--set black level (recommemded states mininum 0.2)---gamma 2.20---priority (set automatically to standard, this adjusts gray balance while maintaining the contrast)---then I hit calibrate and it goes through the process.   The results I get are:                                            Target                                               Result
                          Brightness                                        100cd                                              99.9cd
                           Black Level                                    minimum                                       0.15cd
                          contrast ratio                                                                                            647:1
                          White Point                                    6500k                                              6501k
                           Gamma                                           2.20                                             R   0.6774,0.3136
                                                                                                                                            G   0.2031,0.6992
                                                                                                                                            B    0.1498,0.0499
    Thanks again for your help I know this is alot of information but I thought it might help ?
    Teresa

  • Just got W 8.1 & IE 11. Have Lightroom 5.3  some of my printer profiles are gone on Epson 2880

    I recently bought a new computer with Windows 8.1 & Internet Explorer 11. My Lightroom 5.3 printer paper & color space profiles are gone

    John,
    In the case of the R800, 3.0 has been around for about one year. However, 3.09 was first posted to Epson Europe on 29 October 07 and 6 November 07 to Epson Oceania (Australia and New Zealand). The driver is supposed to be fully compatible with Leopard, but I have no way of checking. According to both Europe and Oceania, drivers for the remaining R series printers (1800, 1900 and 2400) are due out later this month.

  • While syncing my ipod all songs and pictures were cleaned out of it and now it is not recognized by itunes.  Help!

    Whiling syncing my ipod all of my music and pictures were cleaned out and now my ipod is not recognized my itunes.  I have uninstalled and reinstalled itunes and it didn't help.  Any suggestions?

    What shows up on the iPod's display when you have it connected to your PC?  Have you tried resetting the iPod with it still connected?  To this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    Otherwise, try rebooting your PC, opening iTunes, and then reconnecting your iPod to a high powered USB 2.0 port.
    B-rock

Maybe you are looking for