Apple TV froze. Unplugged and re plugged, and now it is continuously checking for date and time. If I bypass it by holding menu, I only have a settings icon, I lost everything else, what do I do?
My Apple TV froze while trying to access Netflix. I unplugged the Apple TV from the wall and re plugged it. Now it stays on the loading time and date setting. After 10 minutes, I held menu, and hit restart (as the troubleshoot said). Same problem is still occurring with the continuous "checking for date and time". And if I hold menu to bypass this, I only have my settings and computer icon, all other icons have disappeared. Not quite sure what to do, any comments would surely help.
Thanks guys, appreciate it.
Matt
Apple TV 1st generation or 2nd?
I would try plugging in the HDMI from the ATV to a different HDMI port on your TV and even trying the ATV on a different TV altogether...sounds like the HDMI port on your TV might be bad or a bad connection. Keep in mind you'll need to switch the TV input to the new HDMI port
Similar Messages
-
I updated my ipod touch 5th gen to iOS 8.2 and left it but when I got back it was in recovery mode with a red iTunes logo and I plugged it into my computer to reset my ipod and it wouldn't do it what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Problem! I just copied my extern hdd to finder and tried to open my files when I get the message: "The Map ”Pictures” can not be opened since you don´t have authority to see it´s contents! What??? No one else has access to my computer....now I can´t open my 300 Gb on my hdd in my Macbook Pro. Help?
I've had this happen a few times before. What I found works is repairing the permissions. To do so click on go and then to utilities. click disk utilities. In disk utilities select the drive and click repair permissions. It may take a little time but try accessing after that.
-
What do I do to check for viruses and or remove them if there is one? I have never had a problem with my mac until now. It is running VERY slow
This is what it came up with.... any ideas?
EtreCheck version: 1.9.11 (43) - report generated May 27, 2014 at 11:07:36 PM CDT
Hardware Information:
MacBook Pro (15-inch, 2.53GHz, Mid 2009)
MacBook Pro - model: MacBookPro5,4
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 1 day 23:26:50
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 249.2 GB (20.75 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[running] com.whitesmoke.uploader.plist Support
User Login Items:
iTunesHelper
AdobeResourceSynchronizer
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Safari Extensions:
WhiteSmoke: Version: 1.0.0.1
Vidx: Version: 2.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071801000001 Support
fbplugin_1_0_1: Version: (null) Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
12% DashboardClient
6% coreaudiod
6% WindowServer
5% repair_packages
3% VLC
Top Processes by Memory:
549 MB repair_packages
143 MB com.apple.WebKit.WebContent
131 MB Safari
119 MB installd
94 MB mds_stores
Virtual Memory Information:
809 MB Free RAM
1.82 GB Active RAM
224 MB Inactive RAM
630 MB Wired RAM
3.66 GB Page-ins
207 MB Page-outs -
I live in Italy and I am trying to buy an App, for the first time with my iphone4...in the past only downloaded free apps free apps; I have a US Visa card and it is not accepted by italian Itunes...what can I do to do my purchases?
On the apple website that is correct i beleive.... but i have an italian american express and am able to purchase stuff here in the US.
I mean, i dont think it really matters -
i plugged my ipad 2 into the computer for the first time and all the music from the itunes converted on however now it wont delete it comes up with 'ping' next to the song
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
my ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
please help! i am at a loss here.
thank you, movie lady
ibook g4The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps. -
my iphone 4s said it needed updating to ios7.2 and so far its displaying the itunes logo and saying plug into itunes so i tried updating with itunes and it keeps saying it has failed (3194)
Hello Amz_Bajwa,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Best of luck,
Mario -
Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
ThanksWhile we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion
-
If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?
She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts. -
Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.
I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.
-
I have an old macbook which is running on OS X 10.6.8. I want to make the switch from moblie me to icloud. I went to download the new OS X Lion so I can connect to the icloud and it is telling me I need a Core 2 duo. I only have a Core duo on this mac. What to do?
Unfortunately there is little you can do, Lion will not run on your machine.
However it is possible to access some features of iClould while staying with SL. If you go to iCloud you will see the web interface for the cloud.
Some but not all functionality is here. Check it out and see if it meets your needs. -
i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?
Try restoring from the backup created at the beginning of the sync process:
Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
Select Restore from backup, choosing your most recent backup to restore from
Disconnect your phone and confirm that your photos are back
Go back to iTunes>Preferences>Devices and re-enable automatic syncing. -
Hi i have an ipod apple shuffle it was stollen and i recovered it now i cant acces my old music,and all the details that were inside it,these person deleted my stuff and installed his please help
This is an Enterprise iPhone forum. You will get more imediate assistance by going to the correct forum.
-
I have an iPhone 4 and plugged it into itunes on my computer for the first time. Only to discover my sister has obviously plugged hers into my itunes account and now I have lost all my photos and numbers. Please help me!!
It can't do that by itself. You had to click through several prompts telling it to restore it from a backup of an old phone for that to happen.
If the phone was not backed up to iCloud before this happened, or to another computer, then the data is gone. There is no way to recover it.
Maybe you are looking for
-
Hey guys suppose i m doin a async FIle to File sceenario using BPM(jst for educational purpose)both sender and receiver have different structure. here is how i m trying to design this scenario DATATYPES DT_sender ,DT_receiver MESSAGETYPES MT_sender,
-
How long is the warranty for the iphone? anyone know?
how long is the warranty for the iphone? anyone know?
-
A block of code takes more time in JRE 6_20 but less in the previous versio
while (entries.hasMoreElements()) { ZipEntry zipEntry = (ZipEntry) entries.nextElement(); is = zipFile.getInputStream(zipEntry); File file = new File(unzipDir, zipEntry.getName()); if (is.available() == 0) { file.mkdir(); is.close(); } else { file.cr
-
Hi, We have SC approval workflow and are using SRM 4.0. Someone has created SC and approval for SC has been rejected. Then SC is mofied and now its been approved. When SC is approved, the status of SC is still at the status' Waiting for Approval' and
-
I am trying to enter x amount of marks by passing a method but placing in an array. When i compile i get no faults but method isn't passing. if i set a number it works but only to to that set number. Any help would be appreciated. import javax.swing.