Applet for EJB on Orcale application server

I developed Oracle Application server deployed EJB. Then I developed Applet client for that EJB. Everything works fine when I use applet viewer for that applet. But when I try to do same from the Netscape (4.7) or IE5 problems occurs. First I try netscape alone. Netscape uses JDK 1.1.5. Applet created initial context, and found EJB on the server, but could not do anything (CORBA MArshall exception occured, and no completed string returned). Then I installed Java Plug in 1.2.2 and tried everything again. Now I always get naming exception. Initial context is created, but client cannot find EJB on the server ( [Root exception is org.omg.CORBA.NO_IMPLEMENT: minor code: 0 completed: No]javax.naming.ServiceUnavailableException at oracle.oas.jndi.oas.SecCosNamingContext.resolve(SecCosNamingContext.java:265) at oracle.oas.jndi.oas.BeanContext.lookup(BeanContext.java:328) .........
occurs). Does someone has some expiriences or can help?
I can run the application but when it comes to applet , its not working.
further can the EJB applet run over Java 1.2 plugin?
null

yeah, but appletviewer is not the solution, I am using jdeveloper 3 , OAS4081. I need to put the client on applet. The documentation says it will work. but the problem remains. I have lareday spent more then 40 hours to find a solution but it won't work.
Jayakumar,If you find a solution can you let me know also. my mail is [email protected]

Similar Messages

Cache coordination for EJB on Oracle application server

I have an enterprise application using Eclipselink that runs on a 2 node clustered OAS instances. I need to set up cache coordination between the two nodes. Can someone please point me to documentation for this setup? I am using v1.2 Eclipselink on 10.1.3.3 OAS.
Thanks.

185743,
In order to access an Enterprise JavaBean, you need to "login" to the EJB container. The login name and password are usually supplied via the "SECURITY_PRINCIPAL" and "SECURITY_CREDENTIALS" properties (from the Context interface).
The error message you are getting -- "Connection refused" -- usually indicates that you have supplied the wrong values for at least one of those properties. There are a number of ways to define these properties, and the one that you require depends on the type of client you are using: either a Web client, or a java client.
Since you did not supply the part of your code that is causing the problem, I cannot help you further.
Good Luck,
Avi.

T-code for delete file from application server

Hi all!
Please, has any t-code for delete file from application server? For upload exist CG3Z, for download has CG3Y. And for delete? Has anyone?
I need to delete file from application server in QA system and i don't want to create a program for this because i will need to transport a request from DEV to QA.

I don't have contact with basis team.
The FM EPS_DELETE_FILE support directory name with max 60 char. My dir. has more than that. I need a transaction for this.
Anybody know if this transaction exist?

No suitable driver for mysql in oracle application server portal 10g

Hi all
i want to run my portlet with mysql4.1 database from "oracle application server portal 10g".
i did all configuration in data source and also i kept mysql connector jar file into all oraclehome/jdbc/jlib folder.
Mysql
General
Name :: helloMysql(jndiname)
Description :: helloMysql
Data Source Class :: com.mysql.jdbc.jdbc2.optional.MysqlXADataSource
JDBC URL :: jdbc:mysql://localhost:3306/database?relaxAutoCommit=true
JDBC Driver :: com.mysql.jdbc.driver
Datasource Username and Password
Username------------>(user name)
password-------------->(password)
JNDI Locations
Location== jdbc/helloMysql
jdbc/blogOracle== jdbc/XA/helloMysql
EJB Location == jdbc/XA/helloMysql
Connection Attributes
Connection Retry Interval (seconds)====1
Max Connection Attempts===empty
Cached Connection Inactivity Timeout (seconds)===30
remaing all are empty
when i run the portlet, then i am getting "No suitable driver" in my portal page.
i want check server console or server log for oracle application server portal.
please help ,where to find server log?
Any suggestions or help from your side.
Thanks in advance.
Raju

I think you're trying to connect to a database in a diferent host than the Web Server.
This is possible in applcations, but not in applets, who only can open TCP connections to the same machine who served the page.
To do that, yo should use a Data Gateway to establish the connections (IDSServer, and so on). I think that installing Oracle's Connection Manager in the same machine than the Web, it would run.
null

Beginner Question - Help Needed for EJB QL Sample Application

I'm working with a group of student interns, like myself, and we've been given an assignment to work with Oracle. All of us have no training or experience with this, so we're just learning as we go.
I've been trying to run the EJB QL Sample Application (http://www.oracle.com/technology/sample_code/tech/java/ejb_corba/ejbql/Install.html), but I keep running into problems at step 3.
Now, we will deploy the sample application onto OC4J. Open another command prompt and go to the folder <OC4J_HOME>/j2ee/home and run the following commands one-by-one
> java -jar admin.jar ormi://<machine_name>:<admin_port> admin <admin_pwd> -deploy -file <SAMPLE_HOME>/build/ejbql.ear -deploymentName Ejbql
> java -jar admin.jar ormi://<machine_name>:<admin_port> admin <admin_pwd> -bindWebApp Ejbql ejbql-war http-web-site /ejbql
where,
<machine_name>      Name of the machine where OC4J Server is running
<admin_port>      Admin Port on which the OC4J server listens. This value by default is 23791 unless explicitly changed by the user
<admin_pwd>      Adminstrator password to access OC4J. The default value is welcome
When I do this step I get this error:
Error: Unable to find java:comp/ServerAdministrator: Lookup error: javax.naming.
AuthenticationException: Invalid username/password for default (sds); nested exc
eption is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds)
com.evermind.client.orion.AdminCommandException: Unable to find java:comp/Server
Administrator: Lookup error: javax.naming.AuthenticationException: Invalid usern
ame/password for default (sds); nested exception is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:105)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
javax.naming.NamingException: Lookup error: javax.naming.AuthenticationException
: Invalid username/password for default (sds); nested exception is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds) [Root exception is javax.naming.AuthenticationException: Invalid usern
ame/password for default (sds)]
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:153)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:102)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
Caused by: javax.naming.AuthenticationException: Invalid username/password for d
efault (sds)
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2410
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2226
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1692)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:727)
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:134)
... 2 more
---- Embedded exception
javax.naming.AuthenticationException: Invalid username/password for default (sds
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2410
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2226
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1692)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:727)
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:134)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:102)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
Any suggestions to fix this error?
Thanks in advance for any help.

George,
The Readme.html file is available with the ejbqlsample.jar downloadable (Extract and find the doc in Ejbql\docs\Readme.html) which is printable.
Or,
If you are trying to print the file directly from OTN site, you need to set the Page-Setup Orientation to 'Landscape'.
Hope this helps.
Regards
Pushkala

RMI of EJB Problem Sun Application Server 8

I have an application that tries to invoke a remote ejb. If the client is on the same box as the ejb then everything works as expected. If the client makes the call from a different application server, then the errors listed below are generated CONTINIOUSLY UNTIL THE CLIENT APP SERVER IS STOPPED.
Although I specify a hostname and port of the desired server, the error in the server log displays the hostname as localhost (which is incorrect, with the correct port) :
locahhost:hostname: 127.0.0.1; port: 33702.
I know that client is communicating with the app server where the ejb reside because the other log messages show the other iiop ports of the ejb app server:
Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.0.1; port: 33702"
Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.0.1; port: 33822"
Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.0.1; port: 33922"
I use the following code to point the remote server:port:
env.put("java.naming.factory.initial", "com.sun.jndi.cosnaming.CNCtxFactory");
env.put("java.naming.provider.url", urlString);
The value of the urlString is extracted from a properties file and
contains the server and the port information.
GENERATED ERRORS:
[#|2007-02-15T12:22:53.995-0500|WARNING|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee._DEFAULT_.rpc.transport|_ThreadID=11;|"IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.0.1; port: 33702"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2257)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2278)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:208)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:221)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:104)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:146)
at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
at org.omg.CosNaming._NamingContextExtStub.resolve(_NamingContextExtStub.java:397)
at com.sun.jndi.cosnaming.CNCtx.callResolve(CNCtx.java:440)
at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:492)
at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:470)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at cyberCash.VerisignDriver.lookupRemoteVerisignAgentBean(VerisignDriver.java:779)
at cyberCash.VerisignDriver.createVerisignRemote(VerisignDriver.java:609)
at cyberCash.VerisignDriver.getVerisignRemote(VerisignDriver.java:579)
at cyberCash.VerisignDriver.SaveInput(VerisignDriver.java:232)
at org.apache.jsp.jsp.ePayment.verisignresults_jsp._jspService(verisignresults_jsp.java:143)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
Caused by: java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:464)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at com.sun.corba.ee.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:63)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:191)
... 52 more
|#]

hi
I am working with Sun java application Server 8.
I can able to create application(*.ear),
(Enterprise Java Bean) bean component,
client application
Problem is, i am unable to provide JNDI name for client application
advice needed to provide JNDI name for the client applications
i dont know whats the use of pointbase/cloudscape
(As i am new to this sjaServer 8, i need your advice)
Response to the following mail id
[email protected]
Please do the favour
thank you

Deploying ejb with Sun Application Server 8

I'm deploying a container-managed entity, my status & my problem is listed below:
Deploytool:
When I verify my entity, I see this error:
Error: Exception [ JDO74033: Cannot deploy application 'LibrarianApp' module 'ejb-jar-ic' with CMP beans: cmp-resource is not defined for this module. The minimum requirement for a cmp-resource is to specify the jndi-name of a jdbc-resource or a persistence-manager-factory-resource to be used with the beans. ] while initializing JDOCodeGenerator. Please check your descriptors and mapping files for consistency
Deploying has not any error but running the application has :
Caught an exception:
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.RemoteException
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:170)
at javax.rmi.CORBA.Util.mapSystemException(Util.java:65)
in CMP Database of my entity, JNDI Name = jndi/MySQL
Sun Java System Application Server Platform Edition 8 Admin Console:
in JDBC Resource JNDI Name: jdbc/MySQL & Pool Name MySQL2
in Connection Pools > MYSQL2 > Data Source Class Name: com.mysql.jdbc.jdbc2.optional.MysqlDataSource
Please Help Me. thx

hi
I am working with Sun java application Server 8.
I can able to create application(*.ear),
(Enterprise Java Bean) bean component,
client application
Problem is, i am unable to provide JNDI name for client application
advice needed to provide JNDI name for the client applications
i dont know whats the use of pointbase/cloudscape
(As i am new to this sjaServer 8, i need your advice)
Response to the following mail id
[email protected]
Please do the favour
thank you

EJB Supporting Different Application Server

I have a task to develop an session/entity bean(for both select and insert) which needs to be called from both WebSphere Application Server(4.x) and Resin Application Server
For your information - WAS uses EJB(1.1) and Resin uses EJB(2.0).
I want to create this session/entity bean which works on both application server without doing any change in code. Is that really possible. If YES - HOW ? Please suggest if you really know anything on this topic. Thanks.
Zahid.

So - Which Entity Bean should I use. CMP or BMP. I would prefer CMP as I do not have to write code for callback methods. Cracker - could I contact you. If yes - please email me at [email protected] I really need help on this and want to complete this. Won't take much of your time. Thanks.
Zahid.

Manual JNDI lookup for EJB3 between different Application Server Instances

Hi all,
i have spent quite some time looking into this problem and searching the net but i just can't figure out for the life of me what i am doing wrong so i hope someone here can give me a clue or a good resource where i can look it up myself.
I am currently doing some interoperability tests concerning EJB calls between Glassfish and Weblogic 10. In my test setup i have an EJB deployed in a jar file on one server and a servlet in a war file deployed on the other. The objective is to try to look up and call the EJB from the servlet. As there seem to be some issues with injection in Weblogic 10 i set that one aside for now (i have opened a case at BEA support for this) but i would like to do a plain old JNDI lookup to obtain the EJB.
The online tutorials and FAQs i have read so far all state that this can be done the same way as it works for EJB2.x, at least if i understood them correctly. The interessting thing is, when i deploy an EJB2.x bean i can look it up without problems, but when i try to do the same with the EJB3 bean the name cannot be found. On the other hand when listing all contents of the JNDI tree in Glassfish from a stand alone application i can see entries for both EJBs of the type java.naming.Reference (in Weblogic i can also see entries for both, but the ones for EJB3 are of some weird internal weblogic types, which i put down as a weblogic problem for now).
The lookup code for the servlet running in weblogic looks like this:
Properties env = new Properties();
env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
env.put(Context.PROVIDER_URL, "corbaname:iiop:1.2@localhost:3700");
Object myEjb = new InitialContext(env).lookup("JNDINameDisplayedByContextListing");
I know that the preferred way would be to have the corbaname put into weblogic.xml/sun-web.xml and just use an InitialContext without an environment to perform the lookup but i wanted to get rid of any additional indirections to pinpoint the source my problem and it should work this way, too. As i said, it works when i target an EJB2.x bean but not with the EJB3 one, so i guess i am doing something wrong there. The jar file contains the interface of the bean annotated with @Remote and the implementation of the interface annotated with @Stateless, i also tried setting the mappedName attribute for the bean and use that name as JNDI name, but that also fails. In addition i added an ejb-jar.xml to the jars META-INF containing the following:
<?xml version="1.0" encoding="UTF-8"?>
<ejb-jar xmlns="http://java.sun.com/xml/ns/javaee"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd"
     version="3.0">
     <enterprise-beans>
          <session>
               <ejb-name>SecurityTest3EJB</ejb-name>
               <ejb-class>
                    testcase.ejb.SecurityTestBean
               </ejb-class>
               <session-type>Stateless</session-type>
               <transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
But the ejb-name specified there does not show up in a context listing, so i would guess that means the file is ignored or only accessible from within the same application server (note, there is no indication of any problems in the Glassfish log when deploying the jar file).
This might be just a stupid mistake by me, but i just can't figure it out at the moment, so any advice will be greatly appriciated.
Thanks, Chris

I think i stumbled across something now. From some posts it seems to me that the EJB3 spec does not require EJBs to be accessible from a remote location, since this can be achieved by using the @RemoteHome annotation and performing a EJB2.x compliant look up. Is that correct?

Looking for file in the application server.

Hello expert,
I want to download a file from SAP application server, but when I get into file system for application server by AL11 , I can't find out the folder for my file, why? is that authority issue or I did the wrong way to get into the system? appreciate very much for your help.
Many Thanks,

Hi,
At AL11, if you have the proper authorizations, you should see a Configure button. After that, enter:
- Directory Name:
server-name\directory
- Param. Name: Z_<directory>
- ServerName: all
Then, click on Save.
Take into account that SAPServiceSID user should have read access to the share.
Regards,
Maximiliano

Urgent.... Help Needed for Storing file in Application Server

Hi All,
I have a requirement where in I have to save a file in Application Server.
File is of 141 Character Length, so there can be spaces left at the end.
When I am downloading the file into Application Sever and then downloading the same file from Application Server to Presentation into a notepad then the spaces at the end are truncating.
I want that the file that is generated should be of 141 character though if there may be spaces at the end.
It will be great if you can help me out in this.
Thanks in Advance.
Jayant Sahu.

when downloading to App server, you need to specify the LENGTH option on your TRANSFER ststement to keep fixed length. You must also use a STRING type variable in your transfer.
From Documentation on Transfer command:
<b>If the file was opened as a text file or a legacy text file, the trailing blank characters are deleted for all data objects, except for those of data type string. The line end marker defined when the file was opened is then added to the remaining content of the data object or to the result of the conversion, and the final result is written byte-by-byte to the file.</b>
There also used to be a problem with WS_DOWNLOAD - you had to do the following:
Maintaining Trailing spaces when downloading to PC
Before calling DOWNLOAD or WS_DOWNLOAD, do a perform SET_TRAIL_BLANKS(saplgrap) using 'X'
To set the length of each record including your blanks add this code: perform SET_FIXLEN(saplgrap) using '0' '100'
Don't think this is needed any more.
Andrew

Program for uploading file on application server...

Hi,
I have created a program to upload a file from presentation server (local desktop) to application server. But in this program I have to specify the file length. What should I do in given program so that I can upload file of any length on application server ?
*& Report Z_FILE_DOWNLOAD_TO_APP_SERVER                               *
* This Program can be used to move flat files to application server from presentation server.
REPORT Z_FILE_DOWNLOAD_TO_APP_SERVER.
PARAMETERS: P_FILE       LIKE IBIPPARMS-PATH,
           P_FILE1(20000) default 'E:CONVERSIONFLAT' lower case.
DATA: WS_FILE TYPE STRING.
DATA: BEGIN OF T_DATA OCCURS 0,
       RECORD(20000),
     END OF T_DATA.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
IMPORTING
FILE_NAME           = P_FILE
START-OF-SELECTION.
WS_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = WS_FILE
FILETYPE                      = 'ASC'
TABLES
   DATA_TAB                      = T_DATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Creating the file at Appl server............................
OPEN DATASET P_FILE1 FOR OUTPUT IN TEXT MODE encoding utf-8.
if sy-subrc ne 0.
message e000(--) with 'Error in opening file'.
endif.
* Trasfer the records to file.............
loop at t_data.
transfer t_data to p_file1.
endloop.
close dataset p_file1.
if sy-subrc eq 0.
write: / 'Written the files at ', p_file1.
write:/ 'Goto AL11 Transaction and then click on SAP Directory DIR_SAPUSERS to look for the file'.
endif.
Please advice.
Regards,
Rajesh

Try declaring it as TYPE STRING. Not sure though.
There are two predefined types in ABAP with variable length:
STRING for character strings
XSTRING for byte strings
Thanks,
SKJ

How to search for a file at application server?

Hi,
I need to choose one file for further processing from the directory, located into 'WORK' directory at application server. As far as I see, class CL_GUI_FRONTEND_SERVICES and FILE_OPEN_DIALOG woudn't help me - it's a 'FRONTEND_SERVICES'.... and work with directories at presentation server.
The requirement is that the user has no file sharing from his local PC to the mentioned directory at application server - this directory is visible only in the scope of the application server. I need something as flexible as CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG, if exist.
How can I achieve this?
Any help would be highly appreciated.
Many thanks in advance.
Regards,
Ivaylo Mutafchiev

Thanks to all contributors!
After short testing I found the following:
1. F4_DXFILENAME_TOPRECURSION is not what I was looking for - it doesn;t behave as expected.
2. FM EPS_GET_DIRECTORY_LISTING would help if I need the result into an internal table (thsi would be a case too), but it doesn;t prompt for selection. Helpful, anyway.
3. /SAPDMC/LSM_F4_SERVER_FILE is the closest match to the requirements.
Thanks to all.
Regards,
Ivaylo
P.S. Abhijit Dani - sorry, you were the second with the same reply, I rewarded the 1st answer as very helpful.

How to include header name for the fields in application server

Hiiii Experts,
                      LOOP AT fp_i_wwcmp INTO fp_wa_wwcmp.
      CONCATENATE fp_wa_wwcmp-pernr
                   fp_wa_wwcmp-etype
                   fp_wa_wwcmp-maxbt
                   fp_wa_wwcmp-epayperiod
                   fp_wa_wwcmp-currencyid
                   INTO l_v_data SEPARATED BY l_v_char_tab.
i need to insert header names for etype,maxbt,epayperiod,currencyid which are needed to be transfer to application server.
regards,
kasyap
Edited by: Harish Kasyap on Sep 18, 2009 2:49 PM

hiiiii clemens thanks a lot for ur reply,
                                                           this is not an alv report,the output is directly transfered into application server AL11.
and i have used this statement
CONCATENATE 'ID'
                'EpayType'
                'EpayAmount'
                'EpayPeriod'
                'CurrencyID'
                   INTO l_v_data SEPARATED BY l_v_char_tab.
transfer l_V_data.
is this the rite one
regards,
kasyap

Hello.war_deployed not generated for Sun Java System Application Server

I have installed and started the Sun Java System Application Server successfully, and can access http://localhost:8080 without any problem. However, after I copied the hello.war following the below instruction in "QuickStart", the hello.war_deployed wasn't generated in the "autodeploy" directory.
# Find<INSTALL_DIR>/samples/quickstart/hello.war.
# Copy it to <INSTALL_DIR>/domains/domain1/autodeploy/
Anybody knows why?
Thanks.

Hai
I have installed Sun Java System Application Server 8
I am able to create Application, Bean component, Appclient Client.
But i dont know where to provide the JNDI name
JNDI tab s'd be there for the Application(any)
I have three tabs(default tabs), JNDI tab is not appearing
I am following the J2EE1.4 pdf document
tell me how to provide the JNDI name for any application
Please do the favour

Applet for EJB on Orcale application server

Similar Messages

Maybe you are looking for