Applying patchset needs migration ?
Hi all,
I'm applying the patchset to change my Oracle version from 9.2.0.1 to 9.2.0.6.
Do I need migrate my database 9.2.0.1 ? If so, does this mean that the patchset 9.2.0.6 do change in Oracle catalog ?
Yang
ps. My database is used only for storing tables and index of Oracle. No any others functionnality nor options.
Do I need migrate my database 9.2.0.1 ?
If so, does this mean that the patchset 9.2.0.6 do change in Oracle catalog ?Yes to both of questions.
Applying of patchset consist of two steps and these both steps must be done.
1. patching the software
2. patching of database (catalog) - during this step database must be in "migrate" mode.
Similar Messages
-
Hi folks,
I want to apply patchset 10.2.0.3 to a 10.2.0.1 Oracle "Client" on Linux (both 32bit and 64bit). So, I started with the 64bit Linux.
1. installed the 10.2.0.1 Client,
2. downloaded the patchset 10.2.0.3 (5337014) for 64bit Linux,
3. read the documentation for the 5337014 patchset
I also downloaded the patchset 5601428 (specified in document 412160.1 referenced in the patchset document), and patchsets 4689959 and 5632264 (specified in document 396671.1 - which is Time Zone related).
I understand that if I do apply the 10.2.0.3 patchset to a 10.2.0.1 database server installation, then I need to apply the patchsets 5601428 and 4689959 (or 5632264) but for just applying the patchset 10.2.0.3 (5337014) to a 10.2.0.1 client, do I still need to apply 4689959 and/or 5632264 ?
will simply (only) applying 10.2.0.3 (5337014) will do the job on the Oracle Client ?
I have done this so many times for the Database Server but haven't done it for the Oracle Client - did search the forums and Metalink but did not find anything specific to applying patchsets to Oracle Client installations.
Thank you and Best regards
ZaferSomebody replied my query on Metalink telling me applying the patchset is the same as the server and to follow the installation manual instructions :) Oracle patchset installation help file (document) could be clearer for the Client installation (as they did include explicit sections for RAC's, etc in the same doc).
Edited by: zaferaktan on Jul 2, 2009 5:31 PM -
After applying patchset 11.1.0.7 to Oracle 11g (11.1.0.6) running on Windows 2003, when starting SQL Developer 1.5.1 I got an error:
"Unable to find main class. Class specified is: oracle/ide/boot/Launcher".
Any idea? Thanks.It is possible that the patch has replaced you shortcut with one pointing to the version within the 11g home. Try running sqldeveloper directly from the executable in the 151 directory.
-
Missing rows / output only one row in a Report after applying patchset 2
Hi.
We use Reports Builder for 10g R2. We had the problem with our AS 10g R2 on windows 2003, that some reports creates duplicate rows when it is a ASCII report (desformat = delimited), see Bug 3340546.
Now we apply Patchset 2 on a local machine, to test the functionality. It fix the problem (look in metalink doc ID 398955.1 under "2.12 Oracle Reports Developer Bugs")-
But now most csv reports creates only one row instead of multiple rows.
We run reports on our local machine with OC4N and local started Form (via Forms Builder) to generate the reports (local started report server) from DevSuite).
When we start the reports with desformat=delimited the txt-file has only the header row and one data row (instead of multiple ones).
And when we generate the same report with desformat=delimiteddata it looks fine and generates all rows as expected.
We found neither here in the forum or in metalink knowledge base nor on the internet.
Have you any suggestions for us how to fix this problem?
Using delimiteddata is now acceptable solution for us, because delimited is easier to use.
Thanks for your help!Hey folks.
We have solved the problem. :)
We applied PatchSet2 for 10gR2. But we don´t know how the csv-report outputs only 1 data-row instead of several rows.
Than we create a similar report (with the same sql-query) as a new one with the reports builder assistant.
This one works pretty fine. So we looked for the attributes and see the "max. number datasets for each site" and it was in the new one set to 0 and in our old one set to 1.
So we change this and ... the old one works pretty fine! :)
So the problem is, that this attribute does not had any consequences in the old version. But since we update with PatchSet 2 it respect this attribute but we don´t "see" it.
Hope this helps others. -
Hello all,
i am planning to apply the patchset 10.2.0.3 on my 2 node 10.2.0.2 RAC on Solaris 10.
In the readme.html, under the known issues its mentioned
11.8 Memory Access Mode not Supported in Oracle RAC
In an Oracle RAC set up, if database instances are not running on the same node as Oracle Enterprise Manager Management Service, then monitoring in memory access mode does not display performance chart data.
This issue is tracked with Oracle bug 5559618.Now how do i know whether oracle has some fix for bug 5559618 .
I did search in th metalink, but could not find any patch or anything.
Is this bug fixed in this patchset or will oracle provide some other one off patches for this bug ??
any idea ??
TIA,
JJSomebody replied my query on Metalink telling me applying the patchset is the same as the server and to follow the installation manual instructions :) Oracle patchset installation help file (document) could be clearer for the Client installation (as they did include explicit sections for RAC's, etc in the same doc).
Edited by: zaferaktan on Jul 2, 2009 5:31 PM -
Advice Needed - Migrating to Macbook Air
This is a multi-facited question and I am seeking advice most of all.
I have a 2008 iMac
I would like to retire it and use my 2011 Mac Air as my primary computer (With a Thunderbolt Display)
If I use the Migratiion Assistant - will I have to delete the files currently on my Mac Air?
Is there a way to merge them?
My concern is also space. With x free
I have 256 ssd hard drive on my air. with 80 free
The drive on the iMac is 320 Gig HD with 170 Gigs free
I have important programs such as CS6 on my iMacs drive - I would prefer not to have to reinstall them.
I have heard that there are issues with booting and updating an OS on an external drive.
I have considered using Super Duper to move my iMacs system to an external drive and selectively boot to it as needed.
Is that a good idea?
Any advice is truly appreciated.A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
2. Screensavers written for the PowerPC System Preference add-ons
3. All Unsanity Haxies Browser and other plug-ins
4. Contextual Menu Items
5. Applications which specifically require the PowerPC G5 Kernel extensions
6. Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
1. Intel In Macs
2. Apple Guide to Universal Applications
3. MacInTouch List of Compatible Universal Binaries
4. MacInTouch List of Rosetta Compatible Applications
5. MacUpdate List of Intel-Compatible Software
6. Transferring data with Setup Assistant - Migration Assistant FAQ
7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake
or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and
registration screens, but do NOT migrate data over. Get to your
desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
Late 2008) - What to do if migration is unsuccessful;
b. MacBook Air - Migration Tips and Tricks;
c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011 -
Error while applying patchset 11.1.0.7 to 11.1.0.6
Hi, I am a new DBA and would appreciate any help on this.
I am in the process of upgrading my database from 10.2.0.4 to 11.1.0.7. I installed 11.1.0.6 and was applying the 11.1.0.7 patch. I installed the 11g patchset successfully and was working on 'Upgrading Oracle Database 11g Release 11.1.0.6 to Oracle Database 11g Release 11.1.0.7' - Section 9.2 of the readme of the 11.1.0.7 patchset. After starting the dbua and selecting the 11g home that needed to be upgraded, the dbua gave the error -
The upgrade Assistant failed in bringing up the database proddb1. Oracle Home /opt/oracle/product/11.1.0/dev obtained from file /etc/oratab was used to connect to the database. Either the database is not running from Oracle Home /opt/oracle/product/11.1.0/dev or the pfile /oravol00/oracle/product/11.1.0/dev/dbs/init.ora used is incorrect. Correct the error and run the Upgrade Assistant again.
Here are some more details about my system - I have a 10g dev instance and a 10g production instance also running on the same box. The 11g instance location is /oravol00/opt/oracle/product/11.1.0/dev and has a soft link to /opt/oracle/product/11.1.0/dev.
I read another thread on the OTN where another person had the same problem and was asked to start the database in the upgrade mode from sqlplus and then try the dbua again. I tried that - started the databse in startup upgrade mode and it gave me this error -
SQL> startup upgrade;
ORACLE instance started.
Total System Global Area 1.0088E+10 bytes
Fixed Size 2162320 bytes
Variable Size 5502927216 bytes
Database Buffers 4563402752 bytes
Redo Buffers 19697664 bytes
ORA-03113: end-of-file on communication channel
Process ID: 19677
Session ID: 170 Serial number: 3
Can someone please give me some clue on what I did wrong here and how to correct it? Any help is appreciated.
Edited by: user12158503 on Mar 12, 2010 7:47 PMI checked my alert log and see errors from the day I installed the 11g instance. When DBUA said the installation is complete, I thought everything went fine. But now I see alert log had errors since then. I created the database on March 12th and tried to install the 11.1.0.7 patch on March 14th by around 3pm. Here is more clarification on the upgrade. I am trying to upgrade my dev environment. I plan to upgrade using export/import. For this I created the 11g instance and am applying the 11.1.07 patch. Next, I need to apply the PSU patch and then do the upgrade.
I am pasting the alert log errors here. Please advice on what I need to do.
I see these errors from the day I created the database -
alter database "progdev" open resetlogs
RESETLOGS after incomplete recovery UNTIL CHANGE 844220
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_ora_29547.trc:
z00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/oravol00/oradata/progdev/redo01.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
2010-03-11 14:23:24.757000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_ora_29547.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/oravol00/oradata/progdev/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
2010-03-11 14:23:27.729000 -06:00
And these from when I tried to do the patch install -
Shutting down instance (immediate)
License high water mark = 71
ORA-1089 : opidrv aborting process unknown ospid (1452_47151230037104)
2010-03-12 16:20:31.653000 -06:00
All dispatchers and shared servers shutdown
2010-03-12 16:20:33.732000 -06:00
ALTER DATABASE CLOSE NORMAL
SMON: disabling tx recovery
SMON: disabling cache recovery
2010-03-12 16:20:34.730000 -06:00
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 4
Successful close of redo thread 1
2010-03-12 16:20:48.060000 -06:00
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
2010-03-12 16:20:49.267000 -06:00
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Stopping background process VKTM:
2010-03-12 16:20:58.416000 -06:00
System State dumped to trace file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_ora_10281.trc
2010-03-12 16:20:59.757000 -06:00
Instance shutdown complete
2010-03-12 17:03:02.814000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 17:03:04.837000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 3
2010-03-12 17:03:08.261000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=26304
VKTM started with pid=3, OS id=26306 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=26310
DBRM started with pid=5, OS id=26312
PSP0 started with pid=6, OS id=26314
DIA0 started with pid=7, OS id=26316
MMAN started with pid=8, OS id=26318
DBW0 started with pid=9, OS id=26320
DBW1 started with pid=10, OS id=26322
LGWR started with pid=11, OS id=26324
CKPT started with pid=12, OS id=26326
SMON started with pid=13, OS id=26328
RECO started with pid=14, OS id=26330
MMON started with pid=15, OS id=26332
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=26334
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
ALTER DATABASE MOUNT
2010-03-12 17:03:12.994000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_26318.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 26318): terminating the instance due to error 27103
ORA-1092 : opitsk aborting process
Instance terminated by MMAN, pid = 26318
2010-03-12 17:12:46.811000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 17:12:48.769000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
2010-03-12 17:12:51.909000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=28723
VKTM started with pid=3, OS id=28725 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=28729
DBRM started with pid=5, OS id=28731
PSP0 started with pid=6, OS id=28733
DIA0 started with pid=7, OS id=28735
MMAN started with pid=8, OS id=28737
DBW0 started with pid=9, OS id=28739
DBW1 started with pid=10, OS id=28741
LGWR started with pid=11, OS id=28743
CKPT started with pid=12, OS id=28745
SMON started with pid=13, OS id=28747
RECO started with pid=14, OS id=28749
MMON started with pid=15, OS id=28751
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=28753
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
ALTER DATABASE MOUNT
2010-03-12 17:12:55.989000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_28737.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 28737): terminating the instance due to error 27103
ORA-1092 : opitsk aborting process
Instance terminated by MMAN, pid = 28737
2010-03-12 21:09:24.016000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 21:09:25.986000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
2010-03-12 21:09:29.084000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=19640
VKTM started with pid=3, OS id=19642 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=19646
DBRM started with pid=5, OS id=19648
PSP0 started with pid=6, OS id=19650
DIA0 started with pid=7, OS id=19652
MMAN started with pid=8, OS id=19654
DBW0 started with pid=9, OS id=19657
DBW1 started with pid=10, OS id=19659
LGWR started with pid=11, OS id=19661
CKPT started with pid=12, OS id=19663
SMON started with pid=13, OS id=19665
RECO started with pid=14, OS id=19667
MMON started with pid=15, OS id=19669
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=19671
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
ALTER DATABASE MOUNT
2010-03-12 21:09:33.214000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_19654.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 19654): terminating the instance due to error 27103
2010-03-12 21:09:34.222000 -06:00
Instance terminated by MMAN, pid = 19654
2010-03-12 21:10:15.072000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 21:10:17.067000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
2010-03-12 21:10:20.227000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=20310
VKTM started with pid=3, OS id=20312 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=20316
DBRM started with pid=5, OS id=20318
PSP0 started with pid=6, OS id=20320
DIA0 started with pid=7, OS id=20322
MMAN started with pid=8, OS id=20324
DBW0 started with pid=9, OS id=20326
DBW1 started with pid=10, OS id=20328
LGWR started with pid=11, OS id=20330
CKPT started with pid=12, OS id=20332
SMON started with pid=13, OS id=20334
RECO started with pid=14, OS id=20336
MMON started with pid=15, OS id=20338
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=20340
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
ALTER DATABASE MOUNT
2010-03-12 21:10:24.263000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_20324.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 20324): terminating the instance due to error 27103
ORA-1092 : opitsk aborting process
Instance terminated by MMAN, pid = 20324
2010-03-12 22:02:04.524000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 22:02:06.715000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
2010-03-12 22:02:10.003000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=32493
VKTM started with pid=3, OS id=32495 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=32499
DBRM started with pid=5, OS id=32501
PSP0 started with pid=6, OS id=32503
DIA0 started with pid=7, OS id=32505
MMAN started with pid=8, OS id=32507
DBW0 started with pid=9, OS id=32509
DBW1 started with pid=10, OS id=32511
LGWR started with pid=11, OS id=32513
CKPT started with pid=12, OS id=32515
SMON started with pid=13, OS id=32517
RECO started with pid=14, OS id=32519
MMON started with pid=15, OS id=32521
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=32523
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
2010-03-12 22:02:11.216000 -06:00
ALTER DATABASE MOUNT
2010-03-12 22:02:14.385000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_32507.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 32507): terminating the instance due to error 27103
ORA-1092 : opitsk aborting process
Instance terminated by MMAN, pid = 32507
oracle@<progdev>:/home/oracle $
Thanks,
Anu -
Validation rules applied to data migration templates at import
Hi everyone!
First post here for me, so please bear with me if I missed something.
My company has just started the initial implementation of ByDesign. We come from a set of disparate and partially home-grown systems that we outgrew a few years ago.
As part of this initial phase, we are basically re-creating the data on customers, suppliers, etc. since none of our existing systems makes a good source, unfortunately. We will be using the XML templates provided by ByDesign itself to import the relevant data.
It has become clear that ByDesign applies validation rules on fields like postal codes (zip codes), states (for some countries), and other fields.
It would be really helpful if we could get access to the rules that are applied at import time, so that we can format the data correctly in advance, rather than having to play "trial and error" at import time. For example, if you import address data, the first time it finds a postal code in the Netherlands which is formatted as "1234AB", it will tell you that "there needs to a space in the 5th position, because it expects the format to be "1234 AB". At that point, you stop the import, go back to the template to fix all the Dutch postal codes, and try the import again, only to run into the next validation issue.
We work with a couple of very experienced German consultants to help us implement ByDesign, and I have put this question to them, but they are unaware of a documented set of validation rules for ByDesign. Which is why I ask the question here.
So just to be very celar on what we are looking for: the data validation/formatting rules that ByDesign enforces at the time the XML data migration templates are imported.
Any help would be appreciated!
Best regards,
EelcoHello Eelco,
welcome to the SAP ByDesign Community Network!
The checks performed on postal codes are country specific, and represent pretty much the information that you would find in places like e.g. the "Postal Codes" page in Wikipedia.
I recommend to start with small files of 50-100 records that are assembled of a representative set of different records, in order to collect the validation rules that need reactions based on your data in an efficient way. Only once you have caught these generic data issues, I would proceed to larger files.
Personnaly I prefer to capture such generic work items on my list, then fix the small sample file immediately by editing, and do an immediate resimulation of the entire file, so that I can drill deeper and collect more generic issues of my data sample. Only after a while when I have harvested all learnings that were in my sample file, I would then apply the collected learnings to my actual data and create a new file - still not too large, in order to use my time efficiently.
Best regards
Michael -
Hi
I have to apply the latest patchset to a system running Sol10-x86 with root on zfs As the usual backout strategy of breaking the root mirror will not work here , I want some opinion on the backout strategy . Particularly I want to know if I create an alternate boot environment with lucreate and then patch the primary boot environment in single user mode , Can the ABE used to boot the system to previous state Basically if I do not want to use luupgrade to apply the patchset ; or using luupgrade in this case is the same as using installpatchset command ?
OR
Will just taking a snapshot of the root pool and keeping it on the same machine work if I need to roll back to original environment
What may be the steps in such roll back
Appreciate any insights on this
TIA and RgdsHello
With zfs rpool you have to use LU, and LU will do all work for you, making the most of ZFS advantage doing snapshot, clone on the current BE and then you will be able to patch the newBE create.
there are 3 mains comamnds, lucreate, luupgrade and luactivate (this will activate one newBE or the oldBE)
Check this doc https://community.oracle.com/docs/DOC-887132
If you are in sparc there is a new Boot command that will print the BE that are on the system
boot -L --> then you will be able to choose the one you one, this is the worst case the newBE that you have tried to boot panic or similar
in X86 you will see 2 entries in grub menu.
Regards
Ezequiel -
Dataguard 11gR2 - Apply Patchset Max Availability
Hello All,
I would like to apply the April PSU to single instance with a 1 physical standby.
When I try to switch off the log transport I get the error ORA-16627.
My question is whether I need to temporarily change the protection mode to max performance for the primary while I shutdown and apply the patchset to the standby?
I am using the note : *How do you apply a Patchset,PSU or CPU in a Data Guard Physical Standby configuration [ID 278641.1]*
Thanks in advance for your help.
Jan S.
ENV
=============
Primary : 11.2.0.3
Standby: 11.2.0.3 Physical
Protection: Max AvailabilityI would like to apply the April PSU to single instance with a 1 physical standby.
When I try to switch off the log transport I get the error ORA-16627.
My question is whether I need to temporarily change the protection mode to max performance for the primary while I shutdown and apply the patchset to the standby?check this link http://blog.grid-it.nl/index.php/2011/05/24/how-is-data-guard-maximum-protection-mode-protecting-your-data/
Please read below completely.
ORA-16627:
operation disallowed since no standby databases would remain to support protection mode
Cause: This status is returned in the following situations:
- The broker rejects an attempt to change the configuration's overall protection mode since it could not find any online, enabled standby databases that support the proposed protection mode.
- The broker rejects an attempt to enable the configuration if it determines there are no online, enabled standby databases that support the overall protection mode.
- The broker rejects an attempt to disable or remove a database that, if disabled or deleted, would result in no remaining standby databases that can support the configuration's overall protection mode.
- The broker rejects an attempt to set the configuration offline if doing so would violate the configuration's overall protection mode.
- The broker rejects an attempt to set a standby database offline if doing so would violate the configuration's overall protection mode.
- The broker rejects a switchover attempt if doing so would violate the configuration's overall protection mode.
- The broker returns this error during a health check.
Action: - If changing the overall protection mode, confirm that at least one standby database satisfies the new protection mode.
- For enable failures, confirm that at least one standby database has a LogXptMode configuration property setting that supports the current overall protection mode.
- For delete and disable failures, confirm that at least one other standby database has a LogXptMode configuration property setting that supports the overall protection mode.
- For state change failures, confirm that at least one other standby database has a LogXptMode configuration property setting that supports the overall protection mode. If setting the configuration OFFLINE you may have to downgrade the protection mode setting to maximum performance beforehand.
- For switchover failures, confirm that at least one other standby database has a LogXptMode configuration property setting that supports the overall protection mode. If your configuration contains a primary database and a single standby database, ensure that the LogXptMode configuration property established for the primary database supports the overall protection mode. After the switchover, the old primary database will become the standby database and its LogXptMode configuration property setting must support the overall protection mode.
- For health check error, confirm that at least one standby database has a LogXptMode configuration property setting that supports the current overall protection mode. -
Should i shutdown other DBs while applying patchsets?
I have a 10.2.0.1.0 and an 11g DB running on a machine. I need a third database which should be of version 10.2.0.4.0 .
For that, i've installed 10.2.0.1.0 on a separate ORACLE_HOME(a software only installation) and i am going to apply the 10.2.0.4.0 patchset. But in the patchset documentation's pre-requisite bit it says
+8.6 Shut Down Oracle Databases+
Shut down any existing Oracle Database instances with normal or immediate priority. On Oracle RAC systems, shut down all instances on each node.
If Automatic Storage Management (ASM) is running, shut down all databases that use ASM, then shut down the ASM instance on each node of the cluster.
Does this mean i have to shutdown all other databases in this machine due to the patchset installation?I just noticed that two threads were created by me for the same issue. This was mistake because of intermittent internet connection problem here. Sorry for the duplicate thread.
-
Applied patchset 10.2.0.4
Hi,
I applied 10.2.0.4 patch set to 10.2.0.3 grid control on solaris sparc(64bit) 5.8 successfully with out any errors.The thing I want to know is it didn't ask to run root.sh!!
But when I applied the patch set to agent,it asked to run the root.sh.
Is that any problem?
Thanks.Thnks for the reply.
I have one more quesn.
The EM agents on other hosts which are of 10.2.0.3 version are showing the below msg when I check the status of agent.
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.3.0
OMS Version : 10.2.0.4.0
Protocol Version : 10.2.0.2.0
Do they have to show
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0
instead of 10.2.0.3.0,becoz my grid control is 10.2.0.4.0 now
Do I need to clear anything?
Thanks -
I have an old iMac (lampshade) that I want to migrate over to an Intel iMac. However, I need to run Tiger on the Intel due to a compatibility issue with one of the apps that I'm running on the current lampshade iMac.
So, what is the best way to do this? I don't want to use Migration Assistant because the new iMac has Leopard on it. I guess I basically need to clone the old computer and install it on the new Mac. Do I do this through target disk mode and then use Carbon Copy Cloner or something like that? Any advice would be appreciated.
Thanks, GregYou've got some cross purpose statements. You say you want Tiger on the Intel machine so you can run certain applications, but you say you don't want to to clone because you don't want to erase the Leopard install, or...?
All the above is moot. If the intel Mac came with Leopard originally it will not run Tiger, period. If it came with Tiger originally (a few models did for a short period) it will run Tiger so reinstall the Intel version of Tiger on it because you can't migrate a PPC version onto an Intel computer. If it is a Tiger-capable computer and you want both Leopard and Tiger on it you will need to partition the drive so you can have a dual boot computer. Let us know exactly what model computer you have. -
Need migration and upgrade info.
Hi
I'm currently running CF 4.5 on a NT4.0 box. I need to
migrate to a box running Windows 2003 Server. Can anybody help
answer the following questions?
1- Does CF4.5 support Windows 2003? If not, what is the
lowest version of CF that supports 2003 and is still being support
by Adobe?
2- Does Adobe support cold fusion Upgrades or Migrations to
2003.
Any help would be greatly appreciated.ColdFusion 4.5 is not supported by Adobe at all. It has never
been tested with Windows 2003 as far as I know, so it might or
might not work properly in that environment. The lowest supported
version of ColdFusion that has been tested on Windows 2003 is
ColdFusion MX 6. -
Server restarted when applying patchset...
Hi,
Db version:10.2.0.1
OS=RHEL 4AS
I was applying 10.2.0.4 patchset on my databse . 80% of installation completed. that time server was rebooted. how to complete my installation?
Thanks,I would recommend that you restore the database from backup and re-do the upgrade.
HTH
Srini
Maybe you are looking for
-
Problem of routing between inside and outside on ASA5505
I have a ASA5505 with mostly factory default configuration. Its license allows only two vlan interfaces (vlan 1 and vlan 2). The default config has interface vlan 1 as inside (security level 100), and interface vlan 2 as outside (security level 0 and
-
Error while determining the form function module
Hi everyone, We are experiencing problems while displaying one adobe form in ESS. Its the Travel Expense form (PTRV_EXPENSE_FORM). When pressing the button to Display/Print the form we get an error message: "Error while determining the form functi
-
Livecache lock handler not available in APO
Hello Experts, We are getting the error "Livecache lock handler not available" error when we are running planning jobs in SAP APO. We are using parallel processing profiles for DP background processing jobs (Macro calculations) and I am getting this
-
so i cant get sir on my iphone 4..even though i downloaded ios6, so i cant get sir on my iphone 4..even though i downloaded ios6
-
Reading/writing a string to a bytearrayoutputstream
I have a small problem whereby I want to write a string over a socket, but i want to do this using a bytearrayoutputstream. My outputting is done like so // CLIENT SIDE DataOutputStream output = new DataOutputStream ( socket.getOutputStream()); // Fi