Applying TAX aganist total Invoice amount

Hello ALL,
We are trying to implement Oracle AR module for Taiwan. The lowest dollar amount use can poay in Taiwan is 1 taiwan dollar, there is no cents. But I oracle applications Ar is set up with 2 decimals and AR apply tax aganist each line, not aganist total amount
As per taiwan govt rules, VAT tax should be applied aganist total invoice and then should be rounded off to nearest dollar.
Current apps doesn't allow to apply tax aganist total. We can't set rounding to 0 , then tax at each line will be rounded off to nearest dollar, there by causing tax to increase or decrease more than a dollar
Seems to be the only way to fix this is maually adjusting the tax amount at each line. Is there anything else you guys can think of ??
any suggestions will be really appreciated
Regards
KK

Hello,
Withholding tax amounts are usually readily available in the database tables. Search for the tax amounts in the same table where you are getting the invoice amounts.
IF it is in percentage, you might have to do a simple math.
cheers,
Sushil Joshi

Similar Messages

  • Applying TAX arte aganist total Invoice amount

    Hello ALL,
    We are trying to implement Oracle AR module for Taiwan. The lowest dollar amount use can poay in Taiwan is 1 taiwan dollar, there is no cents. But I oracle applications Ar is set up with 2 decimals and AR apply tax aganist each line, not aganist total amount
    As per taiwan govt rules, VAT tax should be applied aganist total invoice and then should be rounded off to nearest dollar.
    Current apps doesn't allow to apply tax aganist total. We can't set rounding to 0 , then tax at each line will be rounded off to nearest dollar, there by causing tax to increase or decrease more than a dollar
    Seems to be the only way to fix this is maually adjusting the tax amount at each line. Is there anything else you guys can think of ??
    any suggestions will be really appreciated
    Regards
    KK

    Hello Gurus,
    Please let me know how the Solutions provided here, can delete automatically....
    Is there any problem with those cheater's.....???????????????????????
    Edited by: Vijay Babu Dudla on Jul 20, 2009 7:55 AM

  • My name is Sabahattin Bodur. I purchased Macbook Air (MBAIR 13.3/2.0/8/512Flash). The price is $ 2,199.00 (total invoice amount is $ 2,338.64). When I check on your website, the price of this merchandise looks as $ 1,199. I feel that I have paid more than

    My name is Sabahattin Bodur. I purchased Macbook Air (MBAIR 13.3/2.0/8/512Flash). The price is $ 2,199.00 (total invoice amount is $ 2,338.64). When I check on your website, the price of this merchandise looks as $ 1,199. I feel that I have paid more than it costs.
    Please kindly clarify the situation and inform me.
    Invoice date      : June 27, 2012  12:25 PM
    Invoice number : *************
    Part number       : MD846LL/A
    Serial number     : C0******F57J
    Kind Regards,
    Sabahattin Bodur
    <Edited by Host>

    Thank you for reply Ralph. When I check the system summary on my Mac, I find the following info. It looks like system has not been upgraded. I appreciate if you share your opinion with me.
    Regards,
    Model Name:          MacBook Air
      Model Identifier:          MacBookAir5,2
      Processor Name:          Intel Core i7
      Processor Speed:          2 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          4 MB
      Memory:          8 GB
      Boot ROM Version:          MBA51.00EF.B00
      SMC Version (system):          2.5f7
      Serial Number (system):          C0******57J
      Hardware UUID:        ****
    <Edited By Host>

  • Variance for total invoice amount

    Hi Experts,
    Please advise which variance i can use for total invoice amount. We have price and quantity varaince at item level. But at header level for total invoice amount there is no variance. User is able to enter any amount and it is going to "Inventory Small Diff" account. Please advise.
    Regards,
    Kamal

    Hi,
    You can set tolerance limits with t-code OMR6, if the amount is greater than the limit, system will block the invoice verification, doesn't post!
    Hope can help you!
    Good day
    Tao

  • Rate - How to get the total invoice amount?

    Hi Experts,
    I need assign the 'total invoice amount' to an operand then do some discount calculation. The question is how I could get it. I tried COMPUT99, but it doesn't get anything.
    Thank you,

    Hi - Why don't you use DISC*  ( discount ) variant programs instead of comput99 , you can create a custom variant and fetch the invoice value from ERDK .
    Regards,
    Shekhar

  • Regarding different tax rates in invoice

    hi
    i have a scenario.for aparticular company manchanda co the invoice date is *today's date*.i have a
    particular invoice  for item 1(100pieces),item2 (20pieces),item3(150)pieces with reference to a purchase
    order.the price of item1(100pieces) is 1000eur,price of item2(20pieces)1000eur,price of item3(150pieces)
    3000.there is 10% VAT on (item1,3) i.e 400eur.there is 5% VAT on item2 i.e. 50 eur.the total invoice amount is 5450 euros includind tax
    in the tax tab of the header data in tax code iwill have to enter 10% of input tax for tax amount 400
    and 5% input tax on the tax amount 5% input tax. while creating new taxcode for the above said 2
    requirement in  FTXP,they are not showing as default tax code .only tax code VN,TP is showing as default.how to remove the shortcoming.
    thanks

    If it is Input Tax then in Put Condition type put 5%.
    You can refer other Tax code.
    It is difficult to say without knowing the Purpose.
    Regards
    Biswajit

  • Oracle R12: Tax on Deposit Invoice

    Standard Oracle E-business tax does not apply tax on Deposit Invoices.
    Our project has a requirement in which tax should be applied on Deposit invoices for some of the countries.
    If anyone has worked on this requirements, please share your inputs/documents on this.

    If I understand correctly, it seems like you are manually calculating the tax and entering it to the invoice amount. If you configure your taxes in Oracle, and then enter the invoice for the actual amount, then Oracle will know the true invoice amount which is the discount basis and create the tax line according to the configurations (the way you want it). What you are doing now is adding the tax outside Apps configuration and then expecting Apps to calculate the appropriate discount. If you want to use the standard functionality, you need to set up all dependent parts of that functionality. If tax calculation is a dependency of the discount basis, which is certainly a dependency of discount payment terms, then you need to set it up properly.

  • Vendor Invoice amount allowing any higher value

    Hi
    1. While I do a vendor invoice for a PO, the document balance field (DIFFERENZ) is showing in Green light even before I input the amount in the Amount field.(WRBTR)
    2. And also, if the total invoice amount is USD 1000.00, the amount field is allowing any higher amount. How do i control that ?
    Thanks
    Maruthi Ram

    Hi,
    U can Block Invoice for Higher Limit as well as lower Limit.
    Go to SPRO -->  MM --> Logistic Invoice --> Invoice Block
    Here Go to Company Code and PP - Price Variance and maintain Upper and lower Limit.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Deduct TDS amount in invoice amount with conditions ?

    Hi Experts,
    My client had a requirement that, the business partners deduct TDS in two conditions:
    1  Deduct TDS if the single invoice amount is more than 20000 and
    2  Deduct TDS total invoice amount is more than 50000.
    how can we configure the situation ?
    regards,
    Sanju M S

    Hi!
    Also, post the question to Partner Add-on Forum and to the citixys

  • Diiference in invoice amount allowed to be posted

    Dear All
    While doing invoice verification through MIRO the total invoice amount comes out to be 155.50 SGD.User changed this amount to 155.53 SGD and was allowed to post the invoice despite the user not allowed to post invoice with any amount difference than the invoice amount.Why did SAP allowed user to post invoice with difference and how can we stop the user from posting invoice with difference in amount in future?
    Waiting for an early response.
    Regards
    Satish Kumar

    Hi Satish,
    Can you please check OMRX: Configure Vendor-Specific Tolerances?
    You may also check the corresponding documentation for the customizing.
    Total-based acceptance
    If the difference is within the tolerance range, the system automatically generates a difference line on a neutral income/expense account for small differences for invoices with debit/credit differences when posting the invoice.
    Total-based invoice reduction
    If the difference is within the tolerance range, the system posts the difference to a clearing account and generates a credit memo in a second document to clear this.
    Thanks and regards,
    Polly

  • EMI/Receivalbe balance amount with respect to Invoice Amount

    Hi,
    I have requirement like Invoice total amount and Receipt amount. Every month it has to accumulate the receipt amount and need to tell Open Receivable amount for that particicular month.
    Eg: We have purchased a car and paying EMI every month and need to know the balance of the every month. Need to add the receipt amount of previous months paid and this month paid and tell the total balance against to Total Invoice amount.
    Below is the some rough numbers,I want to plot Line chart for this Open Receivable amount with respect to the Total Invoice Amount with respect to Receipt month. Can you please let me know, how can we achieve this requirement ?
    This is raw data Table:-
    Invoice Date      Receipt Date      Receipt Amount      Open Receivable      Invoice Total Amount
    November      12/31/2013           119                           2,328                     2,447 
    November      1/22/2014             120                           2,327                     2,447 
    November      1/31/2014             576                           1,871                     2,447 
    November                                     0                           2,447                     2,447
                                           Sum: 815                           
    I need in this way :-
    Invoice Date      Receipt Date      Receipt Amount      Open Receivable      Invoice Total Amount
    November      12/31/2013           119                           2,328                     2,447 
    November      1/22/2014             120                           2,208                     2,447 
    November      2/31/2014             576                           1,632                     2,447 
    November                                     0                           1,632                     2,447
                                           Sum: 815                           

    Hi Sathis,
    I have same other requirement for SHOP. I have same Objects as above meaning Invoice Date, Invoice Total amount, Receipt date and Receipt Amount and Group ID for the Account.
    I need to count the Group ID where it's not 100 % paid.
    Can you please let me know, how we can achive this requirement as well ?
    Thanks

  • Applying Tax code on document total as a whole.

    will it be possible to apply tax on a document total as a whole?
    for eg.
    I want to generate a purchase order for 3 items and doesn't want to apply tax code on line level.
    The document total will be say 5000 now i want to put tax code on this value.
    will it be possible.

    Hi,
    In SAP B1, You should link the Tax codes in row level (ie., for every item it's tax code should be defined in that row itself). We cannot define or calculate the tax amount for overall amount.
    Raja.S

  • To caliculate invoice amount with Tax amount

    HI,
    We r here creating purchase register report.
    user requirement is in purchase register user wants invoice values as invoice value + taxes.
    we have takne invoice amount form RSEG Table & taxes form BSET table.
    How can we link RSET to BSET table.we have three lint items from RSEG table but if we select from BSET table all the three line taxes caliculating in to one line items it must caliculate line item wise.
    how can we take line item wise taxes to invoice amout.
    Pls help.
    Regards
    Sunil

    Hi,
    Please also refer the condition number in the report. Since every condition type will have a unique number, line item wise breakup is possible.
    Thanks

  • Clearing amount is more than tax base in Invoice

    Hi Friends,
    I am facing one issue at the time of Clearing through t.code F-54. I have made payment 10000/- and deduct TDS 1% on Base amount 5000/-. We have booked vendor invoice with same amount 10000/- and deduct TDS 1% on base amount 50000/-. Now we are doing clearing F-54 and simulate the document then it is showing error message " Clearing Amount is more than tax base in Invoice" Message no Message no. 8I000.
    Please give your valuable suggestion on it.
    Thanks & Regards,
    Pankaj

    Hi Pankaj,
    There is problem while clearing throgh F-54 is just because of imbalce between the Down payment and the invoice amount.
    In down Payment for deduction of tds calculation  base is 5,000 and in invoice the calculation base is 50,000.
    F-54 is to clear the vendor invoice with same amount.
    Please check .
    Hope this will help you,
    Thanks,
    Deepa

  • How to apply Tax Invoice line in AP and AR

    Hi All,
    I created an invoice in AP and i need to apply a tax line (like VAT )for that invoice.
    Can some one please tell How to setup Tax line in Invoice while we create an invoice?
    Thanks
    Narasaiah.

    Did you create your AP Invoice via the Open Interface or via the screens? While using the Open Interface you can just create an extra line of type TAX, for the screens just make sure the vendor has a tax code applied and autocalculate tax is marked in the setup.

Maybe you are looking for