APR reduction can be done

I have 17 major credit cards and I make a point of asking for APR reductions occasionally on some of them.  So a few days ago I decided to simply do the circuit and ask them all. I got 7 permanent reductions and 4 temporary reductions. Amex - 2 cads reduced, now at 14.99 (Hilton Honors) and 16.99 (BCP)FNBO - reduced to 14.99Discover -reduced to 17.24Barclay Rewards - reduced to 17.24Sallie Mae - reduced to 16.99Citi Dividend - reduced to 20.99 Temporary reductionsAPRs not listed here on them3 Capital One CardsComerica/Elan also temporary One card already at the lowest APR offered for that account for over a year:  Marathon Visa. No go's and will never lower it according to the CSRsPayPal Masters Extra MC @ 23.99 No go's and possibly only with a HPBofAPNCChase Didn't ask:Huntington Voice - New card The hardest of these to get lowered was the Barclay Rewards card which required me filing a case with them and getting a call back from an 'Account Manager'  So it can be done and everyone really should do it.  Even if you PIF each month, you never know what the future might hold.  Most of the reductions were 3-4 points.

TiggerDat wrote:
I have 17 major credit cards and I make a point of asking for APR reductions occasionally on some of them.  So a few days ago I decided to simply do the circuit and ask them all. I got 7 permanent reductions and 4 temporary reductions. Amex - 2 cads reduced, now at 14.99 (Hilton Honors) and 16.99 (BCP)FNBO - reduced to 14.99Discover -reduced to 17.24Barclay Rewards - reduced to 17.24Sallie Mae - reduced to 16.99Citi Dividend - reduced to 20.99 Temporary reductionsAPRs not listed here on them3 Capital One CardsComerica/Elan also temporary One card already at the lowest APR offered for that account for over a year:  Marathon Visa. No go's and will never lower it according to the CSRsPayPal Masters Extra MC @ 23.99  - Correct, unless you were part of a review of select cardholders who received automatic APR reductions during 2014.  You may likely see a unicorn before this APR gets lowered.  Synchrony's APRs are pretty much static unless you qualify for Tier 1 on some of their co-branded cards on a first try.
 No go's and possibly only with a HPBofA - This one you can still try in another 6 months (all based on elegibility criteria).
PNCChase - won't happen unless they automatically reduce it on their own during staggered/periodic account reviews.  Another unicorn sighting possible here.
 Didn't ask:Huntington Voice - New card  - APR is pretty much what it is when you were approved (*insert* creditworthiness here) and will not go lower. The hardest of these to get lowered was the Barclay Rewards card which required me filing a case with them and getting a call back from an 'Account Manager'  So it can be done and everyone really should do it.  Even if you PIF each month, you never know what the future might hold.  Most of the reductions were 3-4 points.Overall a good outcome OP - nicely done!

Similar Messages

  • American Express APR Reduction

    I just finished chatting with AMEX online, and  I was pleasantly surprised that they lowered my APR on my BCP from 21.99% to 17.24%. My cash advance APR did not change however, from 25.24%. I've had the card for a year and five months. How often is AMEX usually willing to give an APR reduction? Are they willing to lower the APR on multiple cards at the same time? I have an ED 21.99% that is a year and two months old, and a Delta 19.24% that's a month old. I definitely don't want to spook them in any way by asking for multiple APR reductions or asking too frequently.

    OP this is already being discussed here: http://ficoforums.myfico.com/t5/Credit-Cards/Amex-APR-reduced-UPDATE-lowered-more/td-p/4087206 Yes, you can request a reduction on multiple cards at the same time. I just did it earlier today.

  • US Bank APR reduction?

    Anyone had luck getting them to lower APR?  I just noticed my Cash+ has a 22.99% rate (ouch).  Never noticed before becuse I PIF every month with this card.  But it would be nice to be able carry a small balance from time to time without getting slammed.  Any suggestions?  Would it be an SP?

    Creditaddict wrote:
    kdm31091 wrote:
    Creditaddict wrote:
    I was told you can check every 6 months for an APR reduction but it will be TEMP... They will NEVER lower the APR the account was opened with and if you think you qualify for better they said to reapply... I facebook messaged them and had a long conversation with a rep who in the end was paid to listen to me bitch because she couldn't do anything... I have been EXTREMELY disappointed with them in this respect.We have 22.99 on our Business Cash Card and 21.99 on our Cash+ card.I said how on one hand do you approve someone for $33k worth of credit but feel they don't qualify for better than your WORST RATE!?I was told it was based on overall credit... I told her she better think of something else to say or say she doesn't know because that just makes her look stupid.With all due respect, being rude and snarly to the CSR like that is not going to get you anywhere, either. I get that the policy is annoying, but some issuers don't really lower APRs by request (Chase for example). US Bank is one of them. It is what it is. There's no need to be nasty to reps about it though. It's not their fault.Like I said she was from the executive response unit but didn't have much power but to talk and I talked to her for over 30 minutes... the comment didn't come across nasty, more like "your job in executive response unit is being undervalued because you are not empowered to fix anything but just chat and see if you can resolve problems without actually changing anything! by the time I made the comment we were on a communication line that it wasn't an insult to her intelligence but the position she was in because of the bank" Did you have your coffee before you called them?  Jeez!   

  • The black "show shadow clipping" indicator not extinguishable.  What can be done?  I tried the obvious.  There is no evidence of clipping.

    The black "show shadow clipping" indicator not extinguishable. .  What can be done?  I tried the obvious.  There is no evidence of clipping.
    Lightroom version: 5.6 [974614]
    License type: Perpetual
    Operating system: Windows 7 Ultimate Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 8
    Processor speed: 3.3 GHz
    Built-in memory: 16364.3 MB
    Real memory available to Lightroom: 16364.3 MB
    Real memory used by Lightroom: 1055.2 MB (6.4%)
    Virtual memory used by Lightroom: 1071.8 MB
    Memory cache size: 2.0 MB
    Maximum thread count used by Camera Raw: 4
    System DPI setting: 96 DPI
    Desktop composition enabled: No
    Displays: 1) 1920x1080, 2) 1920x1080
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.6
    Library Path: C:\Adobe Lightroom Catalogs\2014_05_31 (3).lrcat
    Settings Folder: C:\Users\XXXX\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) Canon Tether Plugin
    2) Facebook
    Config.lua flags: None
    Adapter #1: Vendor : 1002
      Device : 6739
      Subsystem : 25201462
      Revision : 0
      Video Memory : 1003
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers / Headphones (IDT High Definition Audio CODEC)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: Uninitialized
    CardID: 26425
    Direct2DEnabled: false
    GPUDevice: D3D
    MaxTexture2DSize: 8192
    OGLEnabled: true
    Renderer: AMD Radeon HD 6800 Series
    ShaderModel: 11.1
    Vendor: AMD
    VendorID: 4098
    Version: 1002:6739:25201462:0000

    First off, this image is not a raw image.  It is a compressed small-raw of some sort so Adobe's normal demosaicking algorithms are not being employed, and Adobe is having to reverse engineer R, G, B channels from Y, Cb, Cr channels, so something may be non-optimal this conversion.
    Secondly, at least with this non-raw Y, Cb, Cr image, there are some Y pixels that have zero value in the file, so no matter what you do, other than adjusting the bottom of the tone curve above zero, they will be clipped.
    It also seems that the clipping indicator triangles are not affected by the Detail settings so turning off any noise-reduction or sharpening is required show you which pixels the clipping triangle is keying off of.
    Here is your image opened in an RawDigger which is a raw analysis program that indicates the Y channel does have a minimum value of 0:
    Here is a screenshot of LR with a very small crop on the shadowed background area above the performers, with the Detail settings turned off--no noise reduction or sharpening, and the Toning settings as bright as possible, and in that small crop area, there are a few black pixels that are highlighted blue if I turn on the clipping indicator, so it's not surprising, that with this image, at least, the black clipping indicator doesn't turn off very easily.  In this side-by-side, they have the same settings, but the Before image is without the clipping indicator and the After image is with the clipping indicator engaged so you can see the 4 pixels that are 0 in the tiny cropped area:
    Here is a DNG of the settings as in the above LR screenshot, other than the embedded preview that appears to be the entire image not the tiny cropped area:
    https://dl.dropboxusercontent.com/u/9905000/Dab_143378_smallcrop_maxedtoning.dng

  • Barclays Rewards APR Reduction! Woohoo

    Not a big deal to most, but I got my Barclays Rewards card APR reduced from an ugly 24.99% to 20.99%. Credit analyst advised that is the 'max' at one time they can reduce the APR, which is by 4%. I've had my card since March 2015, approved after recon for $1500 with a TU score of 613. I've ran through a few thousand through the card and carry an $800 balance (at the time of APR reduction). My score today when i called was @ 654 TU (up 41 points since approval). No new INQ in the last 3 months. 3 collections falling off 2/2016 (possibly September/October with an EE). Just thought I'd share my experience with everyone. They did advise a SP CLI was not an option at the time and to try back again in a few months. 

    turkey310 wrote:
    ghgirll123 wrote:
    Congrats! I spoke to an analyst yesterday and she indicated that they like to see PIF at least 4 or 5 times a year and good usage in order to get a CLI.Thank you! I usually PIF but had some unexpected expenses last few months and helping my mom out who isn't doing so well, I couldn't PIF as of the last few months. But I have been making $200-400 payments, nonetheless. Never the minimum...I will give it some more time, I bet by October after a few EE from my TU report, my chances will be a lot better since my scores will probably be another +20-30 ptsI make similar payments but going forward I have a revised plan that inlcudes spending less in order to make this a PIF card. I use this card the most because the rewards are good compared to my other cards that I have right now. 

  • American Express: APR Reduction Success

    15 months @ 0% promo just ran out on my American Express Everyday card. Even though this card usually sits in the SD & I rarely carry a balance, I figured I'd reach out to see if  there was an APR reduction offer. My card was sitting at 18.99% since the promo ended just 2 days ago. Below is my result.   This was as painless a process as they come. I know AMEX catches its flack for some clueless CSR's, but they've been on a roll with me lately. They've been top notch over the last year. They also just manually applied my AFC on my PRG since it was over a month and no credit had posted. Kudos AMEX. To anyone out there with an APR over 12.99% give AMEX a chat, it's worth a shot. Have a great weekend everyone. 

    CreditCuriousity wrote:
    Ugh forgot to do this on my Hhonors Account you motivated me to ask!  only had account 35 days... Thank you OP .. Did this on my Delta about 3-4 months back.. Will do on ED as well when 0% apr is over  We are changing your standard APR for Purchases from a rate of
    Prime+15.99% , which is currently 19.24% to a rate of
    Prime+12.99%, which is currently 16.24%.The rate will vary with the market based on the Prime rate as described in your Cardmember Agreement.This change will be effective beginning from the first day of your current billing period.Do I have your permission to make this change to your account?I've had my Hilton HHonors card for two payments in full, so I went on the PC chat.Sophie was helping me, going to check whether the card could get an APR reduction, and I got a blue screen of death.Rebooted. Ricky was helping me, going to check whether the card could get an APR reduction, and I got a blue screen of death.Proceeded to get 5 or 6 blue screens of death, just trying to get through basic functionality, not even able to figure out anything on line before BSOD.So I called AMEX on this old technology called an iPhone and got 19.24% --> 17.24%. Not the best, but a small win. This is being typed on my secondary PC, an old laptop (which is not in bad condition) while I work on figuring out why my main PC can't seem to keep breathing more than 5 minutes.

  • De-authorizing itunes? Several of my authorized pc's have died, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

    Several of my authorized pc laptops and desktops have completely died over the years, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

    Deauthorise all to reset to zero, then authorize again.
    Following quote from Apple Support:
    If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
    Click iTunes Store on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).

  • In R12 DQM synchronization method can be done through UI...

    We have one issue going on where DQM synchronization menthod is changed to BATCH from automatic.
    Its happening frequently.
    Can some one please give the query behind the page so that we can identify who has changed the query.
    Regards,
    Prakash Ranjan

    Duplicate post.
    In R12 DQM synchronization method can be done through UI...
    In R12 DQM synchronization method can be done through UI...

  • Delivery completed indicator set still goods receipt can be done

    Dear SAPians,
    I have created a P.O of say 100 quantity against which i made a goods receipt of 50 quantity.
    After this i have set the delivery complited indicator in P.O but still i can make goods receipt.
    how do i stop these the GRNs
    Regards
    Sujit

    Dear Sujit,
    Just as what Kedar said, Delivery Complete is just an "indicator". It is used for MRP planning purposes and you can still perform receiving even with this indicator checked.
    To block receiving there are 3 ways to do it, i would recommend no.1.
    1) Change the quantity according to receipt quantity.
    2) Set the lock button for the particular line item, which is proposed by many in this forum. However i think it is not the right solution because, you will not be able to do Invoice Verification(MIRO) after setting the lock button! It also doesnt look nice.
    3) You can use Final Delivery field (set it to today so no further receiving can be done). But you also need to configure system message M7163 to Error for this to work. SAP default only sets this to Warning, where you can still proceed.
    Hope this helps.

  • Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

    Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

    Hi LRagsdale517,
    You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
    Please let us know how it goes.
    Best,
    Sara

  • I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone ag

    I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone again. Number 3. I would hope this one doesn't crash but I rather have a different phone so I can enjoy using my account. The phone's most recent error was today. " Unfortunately, the process com.motorola.widget.circlewidget3d" has stopped. At least the error message works and it's polite. I told tech this and they could not answer my question or help me other then "let's do a hard reset" My warranty replacement is coming on Monday. Let's hope this one works. Anyone else havinbg the same problem. it says "such and such as stop working" on all sorts of stuff! Help! I want my iPhone Back!

    I just did a google search on this issue. OMG, I got a ton of videos on this or similar issues. Each one says in some way to clear the cache, reset the data, etc. Why in the world would this continue to happen and they not do a fix that resloves this without having to lose or stop what your doing. This is a very long and constant issue it seems with Android phones as there must have been pages and pages of what I now call "Unfortunately"  So I am going to pray that Verizon helps me  out and gets me away from this issue and helps me go back to iPhone or try the Samsung.

  • How many implimentations can be done for a single BADI definition?

    How many implimentations can be done for a single BADI definition?
    Is there any restriction to impliment a single BADI definition?
    Plz answer with proper explanation....
    Thank you in advance
    REgards,
    Chaitanya

    hi Krishna Chaitanya,
    In a badi if the "Multiple Use" Checkbox is checked then You can have any number of Implementations for the BADI
    Say I have defined a BADI "BADI1"
    and I have 3 implementations
    IMP1
    IMP2
    IMP3
    The order of execution will be IMP1, IMP2 and IMP3
    In a badi if the  "Multiple Use" Checkbox is not checked then You can have ONLY ONE  Implementation for the BADI
    Say I have defined a BADI "BADI1"
    and I have 3 implementations
    IMP1
    IMP2
    IMP3
    Only one Implementation can be active at a time and only that will get executed
    Hope this helps a bit
    Reward if Useful
    Cheers
    Kripa Rangachari.

  • Is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.

    In iTunes, is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.

    Thank you. I have heard of Logic Pro 7, but I have never personally used it. I'm still growing in the world of Composition, and I know that it is something I will be studying in one of my Computer Music classes coming up for my degree. I think it is something I will look into getting once I can justify the price of it. I guess for the time being, I will continue to play and grow in my ability to use and take advantage of GB, and then see what I can do about or with Logic Pro when I'm ready. The thought of spending $1000 for a program is hard to bite, because I've already spent a lot to produce my music, not only electronic music, but also chamber music and so on. I had no idea it would be so expensive to dive deep into the world of composition! lol.
    Finale 2007: $500
    Sibelius 4: $500
    Jam Packs: $400
    Midi Keyboard Interface: $100
    PowerBook: $1700
    Printer for printing scores and analysis: $150
    Logic Pro 7: Oy!
    As you can see it adds up very quickly...that doesn't even include my personal instruments and study materials.
    Thank you for your input, as I haven't really worked much with LP, and therefore didn't know which features are available. I will talk with some of my Composition buddies, and professors and see what they have to say as well, and who knows, I may be able to get the express version through one of them.

  • Reg: If changes done in SAP BO Analysis office, then Changes can be done in SAP BW in respective targets. But, is it possible to do the same changes in SAP ECC? How?

    Hello Everyone,
    If any changes are done in SAP BO Analysis office, then the change can be done in the SAP BW in the respective Targets.
    But how can we do the changes in the SAP ECC ? Is it possible to do the changes in the tables ?
    Any answer is appreciable
    Regards,
    Karteek

    We are using the "Input ready Bex query", in order to modify the values in "BO Analysis office".
    ECC               BI               BO Analysis office
    1  ------------->   1   ---------->         1   ------
                                                                            |
                                                                            | (Now Data is changed in Analysis office from 1 to 2)
                                                                            |
    (?) <--------------   2 <----------         2 <-----
    (Will it be updated in ECC)
    (Diagram Explanation)
    From ECC we can load the data (Consider Value-1) to SAP BI and from SAP BI we can load the data to BO analysis office.
    So, now if we change the data in BO Analysis office (Value-1 changed to Value-2)..
    Now the data is changed in SAP BI to Value-2.
    So what about the data in ECC ? Whether it is changed or not?
    Please provide us a real time business Scenario..
    Thanks,
    Karteek

  • Number of System Log Errors Increasing During Nightly Backup - What Can Be Done?

    Right now, I'm getting quite a number of warnings and errors with my nightly (wbadmin) backups to external USB drive using Windows 8.1 and the Spring Update.  Fortunately, the VSS-integrated system image backups are still sound, but it seems as though
    Windows 8.1 is becoming less and less aware and tolerant of them.  That's not right!
    With Windows 8.1 before the Spring Update I was seeing the warnings, but not the FilterManager errors.  The update brought the errors.
    Perhaps not too many Windows 8 users use wbadmin start backup -vssFull commands to do their backups, but I'm sure a lot of folks running Server 2012 do.
    What can be done to make the backup process smoother and eliminate these warnings and errors?
    Here's the specific list of warnings / errors I got from last night, which started at 2:00am and ran to 4:26am:
    As usual, clicking the Event Log Online Help button yields:  "We're sorry, but the page you requested could not be found.  You can search on TechNet for more information."  Microsoft, you know that needs to be fixed too, right?
    The specific command I'm using, via the Task Scheduler, is:
    wbadmin start backup -allCritial -vssFull -quiet -backupTarget:G:\
    For those who might suggest 3rd party backup, bear in mind I very much want the VSS integration that Windows Backup provides, and while wbadmin is producing backups that can actually be restored I can ignore these warnings and errors.  But it would
    be nice to not have them.
    And yes, I've considered 3rd party backup solutions, but while wbadmin is producing VSS-integrated system image backups that can be restored from the Windows startup recovery environment I'd prefer those.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

    The errors suddenly stopped on their own, but the warnings continue.
    As with most software issues, the errors came back again, specifically after a reboot mandated by yet another Windows Update.  I'm assuming they stopped before because the Filter Manager just gave up, or maybe the volume numbers got too high (notably
    the volume numbers started over again at a lower number).
    As of last night, these messages apparently having to do with my wbadmin backup (which starts at 2am) were logged in my System Event Log:
    2:00:00 (Information) - Virtual Disk Service - Service started.
    2:01:52 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume System Reserved (\Device\HarddiskVolumeShadowCopy22) is healthy.  No action is needed.
    2:02:15 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume C - NoelC4 SSD (\Device\HarddiskVolumeShadowCopy23) is healthy.  No action is needed.
    2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\SYSTEM (TM: {5df557d3-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d2-c9aa-11e3-829a-1803734ec99c}) finished with
    result=0xC00000A2 (Internal code=7).
    2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\DRIVERS (TM: {5df557d5-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d4-c9aa-11e3-829a-1803734ec99c}) finished with
    result=0xC00000A2 (Internal code=7).
    2:02:21 (Information) - Kernel-General - The access history in hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Users\default\ntuser.dat was cleared updating 528 keys and creating 29 modified pages.
    2:02:25 (Information) - FilterManager - File System Filter 'FsDepends' (6.3, ?2013?-?08?-?22T07:39:42.000000000Z) has successfully loaded and registered with Filter Manager.
    2:02:27 (Warning) - disk - Disk 5 has been surprise removed.
    2:02:29 (Warning) - disk - Disk 5 has been surprise removed.
    2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:02:45 (Warning) - disk - Disk 5 has been surprise removed.
    2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:19:55 (Warning) - disk - Disk 5 has been surprise removed.
    2:20:04 (Warning) - disk - Disk 5 has been surprise removed.
    2:30:00 (Information) - Virtual Disk Service - Service stopped.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

Maybe you are looking for