AQ Auto update from Table

Hi All
When I insert records into my table it should update Queue also. What is the best way to implement this?
Thanks in Advance
Raghu.

Hi
thanks for your reply.
This is what my scenario.
I want to send Data from operating to Other operating system. So Whenever user inserts data into table it should update Queue also. Once data comes to queue then I have to propagate to Other operating system. So I would like to the following thing.
If there is any way to use 'trigger' to Insert data into Queue?

Similar Messages

How do I create a chart in Keynote that auto-updates from data in Numbers?

Hello all! So, there are lots of answer to this for iWork'09, but I haven't found them for the current version of Work.
What I'd like to do is take data from Numbers and create a chart in Keynote that would then auto-update if I edited the data in Numbers. Put another way, the Keynote chart data would 'live' in Numbers - every time I edit the Numbers data, I'd like those changes to reflect in Keynote. Any thoughts on how to do this outside of always cutting and pasting from Numbers to Keynote?
Thanks!!

Thanks Gary. I thought I was crazy. I remember that it used to be available - bummer that it's not now.

How to disable software auto update from iPad

I was trying to download my favorite programs and iOS 7, but first I have to stop software auto update, how will I do this?

The actuall problem I'm trying to fix is the following error:
<pre>
Another app is currently holding the yum lock; waiting for it to exit...
The other application is: PackageKit
Memory : 45 M RSS (357 MB VSZ)
Started: Tue Jul 10 09:27:04 2012 - 04:09 ago
State : Sleeping, pid: 2317
</pre>
The above error can happen if you have an active Gnome session and e.g. connect as root using ssh session and try to use yum.
I may have found a way now to disable the automatic system updates, however, I don't know if this is the proper solution since I cannot find any information about it.
I modified */etc/PackageKit/PackageKit.conf* and changed:
<pre>
DefaultBackend=yum -> DefaultBackend=nobackend
</pre>
It requires a re-login of your Gnome X session to take affect.
Then Administration/Software update does no longer scan for updates, and apparently no longer lock yum at the system level. At least the problem seems to be fixed globally that way.
I will mark this question as answered, but any ideas are still welcome.
Thanks!
Btw, here is a link to previous older thread to disable it on a per-user basis:
Disable PackageKit Update Applet

Auto updated from 7.1 to 7.2 now it wont open OS X

did an auto update this morning for various applications that were available and now neither itunes or quick time will even load up.
please help

wrong forum sorry

After auto-update from Thunderbird 30- 31, To: email is red

After Thunderbird [running on Windows 8.1] updated from v. 30 to 31.0, the To: line in email addresses pulled from my Address Book turns and remains red, rather than changing to black. _This issue is dependent on the typing speed while entering the first characters of an email address_ and only occurs when typing slowly.
To replicate:
1. Type a few letters from the email address in the Address Book, typing s l o w l y. Choose an entry for which there is more than one name or email address beginning with the same same letter. (Collected Addresses was the source in my tests.)
2. Select one of the entries shown, either by
a. hitting the Enter key if the To: box is populated correctly
b. clicking on the correct entry in the drop-down list
c. scrolling down to the entry and pressing Enter.
3. Observe that while typing, on the second or subsequent letter entered the To: text changes from black to red.

Please see this bug: https://bugzilla.mozilla.org/show_bug.cgi?id=1042561

After auto update from 3.6.3 to 3.6.13, "proxy server refuses connection". I have to uninstall 3.6.13 and install 3.6.3 in order for it to work again.

I have been very satisfied with Mozilla Firefox until recently. I have Firefox 3.6.3. Every time a box appears with "installing updates" it installs updates then the screen goes to "problem loading page" and "the proxy server is refusing connections". The only way I can get internet access is to go to "control panel" then "add or remove programs" then I have to "uninstall mozilla firefox 3.6.13. Then I click on my "Firefox Setup 3.6.3, and I install that version. Once I do that, everything works fine again. It is such a headache because I can't prevent the "installing updates" from happening and once it happens, it does not work, as described above.
Any thoughts???????
Russ Carlson ''moderator removed email address and cellphone number''

I have this problem also.
Can't bring up the Hotmail screen.
I am looking for a simple way to
get rid of 3.6.13.
I tried restoring to a point
before the Dec 10 upgrade but when system
restored Firefox was still 3.6.13
I guess I will have to abandon MOZILLA FIREFOX
and start using MICROSOFT IE

Member Access Profile - update from table MemberAccess

Hello,
We need to do an update in all our member access profiles. As we have 710 profiles, it's very time consuming to update each of them seperately.
I was looking into the table MemberAccess profile to update the profiles. I manage to update all profiles with one query but unfortunately it seems that we still need to go into SAP BPC Admin to process each profile. If I don't process in SAP BPC Admin, I get the error in Excel: 'There is a problem in dimension file: Entity' and the current view in Entity dimension just shows ...more... instead of the correct security!
Is there another way of updating the MemberAccess profiles in 1 go, without needing to process it individually? This would save us a lot of time!
Thanks,
Sofie Luyten

Sofie,
Are you assuming it didn't work because of the "Return Value = 0" result? That stored procedure isn't designed to return anything so whether it ran properly or not you wouldn't get much back (except an error message is something went very wrong).
The only way that you can know if it worked is to look at the acsEntity table and make sure it has all of the proper records. I guess you can also start up SQL Profiler before executing the stored procedure to see what the stored procedure runs and make sure that's what you want. I'm not sure how familiar you are with SQL though so that may not be helpful for you.
Jimmy

Update from table ORA-00933 error

I use Oracle 10g. The following throws an ORA-00933 SQL command not properly ended Error
update fb_mst_complaint
set sub_category = n.subcategory
from fb_mst_complaint s,
select a.docket_no, a.sub_category, c.subcategory
from fb_mst_complaint a,
+( select category, min(subcategory) subcategory+
from fb_subcategory
where activated > 0
group by category
+) c+
where a.category =
+( select distinct a.category from fb_subcategory b+
where b.category = a.category
and b.subcategory = c.subcategory
and b.activated > 0
+)+
and a.category = c.category
and a.sub_category <= 0
) n
where s.docket_no = n.docket_no
and s.sub_category = n.sub_category
and s.docket_no = 8573;
The error is shown in the FROM clause. However, The SELECT statement which makes up the alias name 'n' works accurately.
Please help. Thanks for the help in advance.
Edited by: user11195221 on May 24, 2009 6:35 AM

user11195221 wrote:
The issue is that the inner select returns multiple values and therefore cannot be set as mentioned.Well then you cannot do this in a single UPDATE statement (you could use the rownum = 1 construct but it would make no sense without knowing the business context).

Auto-Update from 9.2 - 9.3 failing behind proxy. Failing authentication.

Interestingly, if I apply the 9.3 update manually, then the updater works fine after that. I used the updater to successfully install the language pack for 9.3.
But, If I try to use the update to go from 9.2 to 9.3, I get a dialog box asking for proxy autentication. I've tried entering in my credentials, but it does not take them. Errors out with a could not establish a connection, Error:1400. I see no errors on the proxy.
I am the proxy admin, and I have configured it to disable all filtering for *.adobe.com. I don't have a way to disable authentication on a per-domain basis unfortunately.
I read that 9.2 is using BITS to update, and 9.3 does not. Does this mean something?
I'd like to give users the ability to make this upgrade automatically. Any ideas?

Found this:
http://forums.adobe.com/message/2393034#2393034
Looks like we have to do it manually.

FAGLFLEXT table is not updating from FAGLFLEXA

Hello Experts,
In thru which program the summarisatin table of FAGLFLEXT getting updated from table FAGLFLEXA .
We've updated some filed values like prctr , cost center to FAGLFLEXA but the same cumulative amount is not showing in the table period wise and there is a difference in balace sheet.
Pls advise, how to generate the table FAGLFLEXT to get my overall balances or how to run this table to go and do their own std calculations and updation.
Pls advise.
thanks & regards
sankar.

Thanks

Regarding "Update .. From Table" Statement

Hi,
I have an existing piece of code which I'm trying to understand.
There are two scenarios regarding the UPDATE statement.
1) Scenario 1:
There exists a database table with around 100 or more fields/columns [Eg: DB_TABLE1].
An Internal Table exists with the same key as the above database table [EG: I_TABLE1].
code:
loop at I_TABLE1.
update DB_TABLE1
set kf1 = I_TABLE1-kfa
   kf2 = I_TABLE1-kfb
   kf3 = I_TABLE1-kfc
   kf4 = I_TABLE1-kfd
where key1 = I_TABLE1-keya AND key2 = I_TABLE1-keyb.
Endloop.
In the above scenario the records in database table [DB_TABLE1] with matching condition are updated and the rest of the fields are not touched. - Correct me if I am wrong.
2) Scenario 2:
There exists a database table with around 100 or more fields/columns [Eg: DB_TABLE1].
Two Internal Tables exist with the same key as the above database table [EG: I_TABLE1 And I_TABLE2].
Code part a:
SELECT * FROM DB_TABLE1 INTO TABLE I_TABLE2
      WHERE KF1 <> 0.
Internal Table 1 has some data.
Code part b:
loop at I_TABLE1.
update DB_TABLE1
set kf1 = I_TABLE1-kfa
   kf2 = I_TABLE1-kfb
   kf3 = I_TABLE1-kfc
   kf4 = I_TABLE1-kfd
where key1 = I_TABLE1-keya AND key2 = I_TABLE1-keyb.
Endloop.
Code part c:
update DB_TABLE1 FROM TABLE I_TABLE2.
In the second scenario what will be the final effect of DB_TABLE1?
As i understand it, there is no use of Code part b. Am I right?
I thought that the records in I_TABLE2 with matching key in DB_TABLE1 will be updated and the rest of the records will be deleted.
But actually there is not change in the DB_TABLE1 when the above code is executed.
Help is appreciated.
Thanks.

Hi Joey,
Scenario 1: In the above scenario the records in database table DB_TABLE1 with matching condition are updated and the rest of the fields are not touched.
- That's right.
Scenario 2: As i understand it, there is no use of Code part b.
- Exactly because of the following reasons:
1. Code part a shows data selected from DB_TABLE1 INTO TABLE I_TABLE2.
2. Code part c shows DB_TABLE1 updated from TABLE I_TABLE2 whereas Code part b uses ONLY internal table I_TABLE1.
3. If there are any operations performed in Code Part b on 'I_TABLE2', then this would have been different.
Regards,
Pranav.

Auto Updation of Views

Hi Techies,
I have a quick question in working with views..
I have a view inserted in my universe, and we have added 4 new columns to that view at DB level.
and before to the addition of these columns 2 reports were generated from the universe which is built on the view...
now in My universe designer in universe pane, the objects are automatically updated for all the new columns which are added to the view, how to avoid this automatic updation of objects in universe pane for the columns added to the view.

Hi..
I think there is no auto updation of tables/Views, in the Data Foundation Editor, select Refresh Structure from the Detect menu.
Then only refreshing the structure of a data foundation compares the existing tables in the data foundation with those in data source and proposes updates to the data foundation tables: deletes obsolete tables and columns, inserts missing columns, and updates changed columns.
Thanks
Sreeni

Firefox auto-update bounces back end forth between 3.6.11 and 3.6.12

Firefox keeps going through the following apparently endless cycle: It realizes it's not on the latest version and auto-updates from 3.6.11 to 3.6.12. Everything is fine for a few uses, then it tells me it needs to reboot to complete an update, upon which its "completion" of the update results in it reverting back to 3.6.11. After a few uses of that version the entire cycle repeats (It again wants to install an update to 3.6.12)... and so it continues

You can check for a problem with the prefs.<br />
See http://kb.mozillazine.org/Preferences_not_saved

HP Auto Update

My HDMI video and audio were fine. However, after HP Auto Update prompted me to update with out any cancel button, and it automatic updated by itself, there was no sound from my TV, and also, the display was bigger than my TV. After that I did a system restore, and my HDMI video and audio are working fine again.
My question is:
How do I stop HP Auto Update from updating automatically?
Please advise.

Hi @bktran
Welcome to the HP Forums!
It is a terrific place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that an HP update was installed and you lost the audio and the resolution on the display had been changed.
You did a restore and everything is back to normal. You would like to know how to stop the update from being installed.
Here is a link to Change how Windows installs or notifies you about updates that will allow you to choose by changing the setting.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Disable Microsoft Auto Updates via ARD/Terminal

Hi there,
We have rolled out 100 copies of Office 2011 to our 10.6.7 users.
By default they are currently set to automatically check for Updates. I'd like to stop Microsoft Auto Update from running on each machine and then roll out updates (After our own testing) when we see fit using ARD. This will also save us huge amounts of bandwidth.
Does anyone know how the terminal commands to stop Microsoft Auto Update from running automatically?
I have asked over at Microsoft but I dare say they're not going to be too helpful!

As an update to this thread.
MCX would indeed be a way to do this for users, however MCX aka. Managed Preferences is deprecated in Mavericks and you should instead do this via Profile Manager. There is also another method you could use, if you put this preference in the User Template folder then any user account created afterwards will take a copy of the plist file and use it. The following command would create a plist in the User Template folder with this setting
sudo defaults write /System/Library/User\ Template/English.lproj/Library/Preferences/com.microsoft.autoupdate2 HowToCheck Manual
You could also add this to a DeployStudio (or similar) imaging work flow by adding the following to a generic script step
/usr/bin/defaults write /System/Library/User\ Template/English.lproj/Library/Preferences/com.microsoft.autoupdate2 HowToCheck Manual
By the way, my thanks to varjak for the original solution.

AQ Auto update from Table

Similar Messages

Maybe you are looking for