Are JUnit jar and spring OSGi bundle in OEPE compatible with each other?

The OEPE 11g comes with org.junit4_4.3.1 and Spring OSGi Bundle (org.springframework.bundle.spring_2.5.6.v200808081800.jar). However, these two seem to be incompatible. For example, @RunWith(SpringJUnit4ClassRunner.class) in a test case gives error because org.junit.internal.runners.JUnit4ClassRunner is not in the junit.jar.

Hello,
There could be a compatibility issue.
I mentioned in the other thread that downloading a more recent JUnit JAR and using it in your project might help us diagnose the issue further.
Let us know the results of that test.
Regards,
Andrew

Similar Messages

HT2477 Are documentS created with Microsoft office for windows and Microsoft office for mac are compatible with each other

Are documents created with Microsoft office for windows and Microsoft office for mac are compatible with each other?

As with a lot of software, it depends on the version of Word, and what features the author used.
Technically, Office 2010 for Windows and 2011 for Mac are supposed to be feature compatible. As are Office 2007 for Windows, and 2008 for Mac.
However, if a person using Office 2010 / 2011 used a feature that only exists in that version and sends the file to someone using Office 2007 / 2008, they would very likely have trouble opening the file, or having it display as intended.

Airport and Linksys WEP do not play well with each other

I have a MacBook Pro (15", 2.0ghz, 2gb RAM, 100gb HDD - OSX 10.4.8) connecting to Linksys AP's and/or Router with WEP.
I can NOT connect to WEP locked Linksys stuff. I have read all over the internets that you just prefix the WEP key with a $, but when I try and do that - OSX will not take the key - it just makes the "dunk" noise that means "you can't do that, stupidhead". I believe this information is for older versions of the Airport software.
This has happened with my WRT54g at home, as well as two WAP54GP's I just set up at my new office all with the latest / new firmwares.
Using the same key in Boot Camp/Windows (cut and pasted out of a text file on a USB thumb drive) it works just perfectly. Is there a way to get some more debug level info out of Airport when it tries to connect?
Here is a screenshot of my config:
Click me!
iMac G5 2.0 /\ 15" MacBook Pro /\ Core Solo Mac Mini Mac OS X (10.4) Black iPod Video 30g

Easiest solution is to use WPA instead, this is actually secure compared to WEP.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.

HT201269 me and my brother both are having iphone 4s we just want to exchange phones with each other also the whole data from one iphone to other is this possible or how can i do that with only one itunes?

just want to move data between two iphones using one itunes.

Make sure your computer iTunes is up to date. (iTunes 11.1.1)
Now, do it one iPhone at a time; When you connect and select iPhone in computer iTunes sidebar (iTunes > View > Show Sidebar), what iPhone name do you see?
iTunes is smart enough to tell the differences if each has a unique name.
Point One checked.
Right click on iPhone name in Sidebar and choose Backup.
Do the same for the second iPhone.
Make a copy of the backups in computer to another location (Just incase something gone wrong)
Where iTunes backups are stored on computer http://support.apple.com/kb/HT4946
Point 2 checked.
Point 3 & 4
http://support.apple.com/kb/ht1766

Lightroom and Photoshop don't want to work with each other ...

Hello,
I've a problem with Lightroom 2.4 and Photoshop Cs4 (11.0.1).
When I let Lightroom open a photo in Photoshop to edit it (photo>edit in>Photoshop cs4) it opens it into Photoshop, and I can do wathever I want to the photo. But here's the problem: when I'm ready and click Save, the new Psd-file doesn't comes back into Lightroom... However, Photoshop did save the new Psd-file in the right location with the right file-name, so I have to synchronise the folder and import it back into the catalog. I have Jpegs and DNGs in my catalog, but they both have the problem. The funy part about this is that this happens to almost every photo, so not every photo. I have seen a few photos (about 5 out of 10.000) that do come back in the catalog automatically. I have made a little second catalog to test if it's a problem with the catalog, but the second catalog has the same problem. I already reïnstalled Photoshop, but it didn't help. My operating system is Mac Os X 10.5.8. Camera is 5.4...
Can anyone help me, because it's a real pain in the back to edit my photos in Photoshop right now....
Thanks,
Vincent

Deleting Prefs in both LR and PS sometimes cleans this up.
How to locate Preferences files in LR

LDAP Console: why are ds52.jar and ds522.jar needed?

I updated Sun DS from 5.2 to 5.2 patchlevel 2, the server on Solaris and the LDAP Console on Windows a while ago.
If I start the LDAP Console all is well.
If I open the "Server Group" tree node, it wants to download admserv52.jar and ds52.jar
which fails.
There are admserv522.jar and ds522.jar (and others with 522 in their file name in the java/jars directory.
If I copy admserv52.jar and ds52.jar by hand the LDAP Console is able to open the nodes under Server Group,
but I guess they use the 5.2 and not the 5.22 Versions.
As an experiment I removed all 5.2 Versions and renamed the 5.22 Versions to 5.2. Result: The LDAP Console does work and it only needs the 5.22 jars.
Info on Main Console says Server Console 5.2
Build 2004.007.1414
Info an Directory Server Windows says Server 5.2
Build 2003.143.0020(I use the german localized versions but I guess the problem is not relate to that fact)
Question: How do I configure my setup to use only the new 5.22 Versions in the Console?
Where did my update go wrong? Or do I really need the 5.2 and 5.22 Versions in /java/Jars?
Thanks,
Frerk Meyer

By try and error I found out that even when I upgraded my
Sun ONE Directory Server 5.2 to patch level 2, the configuration
in the administration directory was not changed to the new
version. So one couldn't connect with the new console
version 5.2pl2 but used and needed the old one effectively.
To use the 5.2 pl 2 console there need to be the following
files in the client directory:
<root of sun ldap console>/java/jars/
ds522.jar (main console application)
ds522_en.jar (english language resources)
ds522_de.jar (german language resources, in my case, optional)
ds522.icon (icon used in the console)
and for the administration console:
admserv522.jar
admserv522_en.jar
admserv522_de.jar
admserv522.icon
The old file with the '52' in their name may stay where they
are to connect to unpatched 5.2 Servers and 5.2pl2 Servers
without updated configuration.
The configuration is under:
cn=ResourceEditorExtension, ou=4.0, ou=Admin, ou=Global Preferences, ou=zentrale.edekanet.de, o=NetscapeRoot
Search for the attribute 'nsclassname' in all subentries where there
is a substring '@ds52.jar' and change it to '@ds522.jar'.
With newer versions of the Sun Directory Server there are
even jar files with names like 'ds523.jar'. Proceed like above.
After the next start of the console you are using the new 5.2pl2
Versions with all bugfixes and enhancements. To verify you may
move the '52' files away, start and connect. If the directory server
is configured the right way it won't try to download the '52' files
to your local computer.
Frerk

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

I have the iPhone and my own Apple ID. I would like the iPad to have my husbands Apple ID so we are able to communicate with each other (he is deaf). How can FaceTime and iMessage be set up to do this?

I have the iPhone and my own Apple ID. I would like the iPad to have my husbands Apple ID so we are able to communicate with each other (he is deaf). How can FaceTime and iMessage be set up to do this?

Log into each device with your own Apple ID's in Settings > iCloud.
Then, so you can share preiously purchased apps, log into both devices using the Apple ID used to make those purchases, but ONLY in Settings > iTunes and Apps Stores.
Verify that each device uses your own Apple IDs in Settings > Facetime and Settings > Messages.

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
I have chek the DNS and nslookup all are correct but this is generate error.
Is this possible Mumbai location join with this Domain(CAPLDC)???
One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
Pls find the error message below and also find the attachment.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The domain name "capldc" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
The following domain controllers were identified by the query:
capldcserver.capldc
win-dyfq2poc88q.capldc
However no domain controllers could be contacted.
Common causes of this error include:
- Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
- Domain controllers registered in DNS are not connected to the network or are not running.
Pankaj Kumar

Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
Please refer to the articles below to fix your current issue:
http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

TS3988 I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

Welcome to the Apple Community.
You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud.

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please researc

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.

Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran

BODS / SAP : what set-ups are required for communicating with each other ?

Hi.
There is a new SAP system
And there is a new BODS installation.
Both on independent server machines but on the same lan network.
On the test system of BODS. We tried to see how the communication happens with SAP.
While we try some test jobs by trying to pull a simple table on SAP R/3
In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
In the datastore,
We used the Generate and Execute option,
with a path on the local directory of BODS server for creating the ABAP program and the dat file.
However,
We are always getting error on batch job schedule.
Although the user is having rights on the R/3 table
And can login into SAP R/3 system and check the table.
Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
For anyone whose login we use. We get the error.
However, if i directly generate the code on the ABAP flow (without running the job),
make the program available on R/3 system.
and then run the job as execute preloaded
this works fine without any error.
and we are able to see the data in the target table.
Now both the systems are new.
And am not aware of the initial set-ups which are required for communication between SAP / BODS.
Are WE missing something on the SAP side setups - for generate and execute option to be used?
Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
Can anyone share some inputs on this.
Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option, it errors out after nearly 10 minutes. Then the error says, login info not correct.
So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
If anyone with SAP admin expertise - can help or advise on this.
Many thanks
Indu
Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
The first basic task is to get the little ABAP extraction programs loaded and run in R/3. You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime. During development, use "Generate and Execute" for your ABAP.
Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory". Refer to the documentation (the BODS SAP Supplement) for a description of all this.
In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server." For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow. If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them. If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server. So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration. If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share. Get it? Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either. FTP works similarly -- if you're using that and having trouble, please re-post.
Best wishes,
Jeff Prenevost
Data Services Practice Manager
itelligence

Hi my mum has recently gotten a white iphone4 and i have a black iphone4 we both would really want to switch over our phones with each other i was just wondering if there would be any issues would the data contract be switched over???

please can someone help me i have got a black iphone 4 and my mum has got a white iphone 4 we would like to switch both of our phones with each other we are just worried if the data services and our contracts will be switched over we dont care about our phone music and contacts ok thankyou

Most carrers won't care if you change phones as long as you are payng for al the services they require. Since you both have iPhones, it probably won't be an issue, but since we don't know who your carrier is we can't say it they will have a problem with you making that change or not. The only way to make certain it won't be a problem is to contact your carrier...

HT5225 I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G. I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.

I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G. I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.
Is there a setting on the iphone that will allow ical entries on the iphone to sink to my other computers
Thank-you

Welcome to the Apple community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Are JUnit jar and spring OSGi bundle in OEPE compatible with each other?

Similar Messages

Maybe you are looking for