Array Insertion Point
I'm looking for code that explains how to do this:
BEGIN
IF contact detail list is empty
THEN
Set insertion point of new entry to first entry
ELSE
IF enrolment number is greater than enrolment number in last entry
THEN
Set insertion point of new entry to entry after current last entry
ELSE
Locate insertion point of new contact detail
Move subsequent existing contact detail entries one position
END IF
END IF
Insert new contact detail at insertion point over writing any previous contact detail entry
END
I've looked at a number of websites and books and they totally ignore insertion points which is so frustrating. Any links would be hugely appreciated.
Hi
Thanks for the reply.I've found this example for adding elements, hopefully i'm on the right track
a.add(i, e) Inserts e at index i, shifting elements up as necessary.
I'm still a bit confused about 'setting the insertion point' :(
Similar Messages
-
How can i insert the insertion point in each paragraph first
Hi all
Please find the below script, this script place the insertion point in end of the each paragraph, but i need to place the insertion point in first letter of the each paragraph. Please help.
var myDoc=app.documents.item(0)
var myLib=app.libraries.item(0)
app.findTextPreferences=null;
app.changeTextPreferences=null;
app.findChangeTextOptions.caseSensitive=false;
app.findChangeTextOptions.includeFootnotes=false;
app.findTextPreferences.appliedParagraphStyle="TX"
app.findTextPreferences.findWhat="^p"
var myFinds=myDoc.findText()
for(i=0; i<myFinds.length; i++)
var myIcon=myLib.assets.item("Para").placeAsset(myFinds[i].insertionPoints[0])[0]
myIcon.appliedObjectStyle=myDoc.objectStyles.item("Para No")
Thanks & Regards
Nithin@Nithin – inserting the anchor by placing the asset is changing the position of the next anchor, because the script's for-loop is running from the first found instance to the last found one.
If you go through all the found instances from back to forth would be one solution.
var myDoc=app.documents.item(0)
var myLib=app.libraries.item(0)
app.findGrepPreferences=null;
app.changeGrepPreferences=null;
app.findChangeGrepOptions.includeFootnotes=false;
app.findGrepPreferences.appliedParagraphStyle="TX"
app.findGrepPreferences.findWhat=".+\\r"
var myFinds=myDoc.findGrep()
for(i=myFinds.length-1; i>=0; i--)
var myIcon=myLib.assets.item("Para").placeAsset(myFinds[i].insertionPoints[0])[0]
myIcon.appliedObjectStyle=myDoc.objectStyles.item("Para No")
Another one would be doing the search from back to forth and not changing the for-loop:
var myFinds=myDoc.findGrep(true);
Array of Text findGrep ([reverseOrder: bool])
Finds text that matches the find what value.
Uwe -
The size limit of the OCI LOB Array Insert is 64K for one field?
I have a table with 4 field, and one is BLOB field. I want to insert 16 rows in one OCIStmtExecute. I know I can specify the iter parameter with 16 to execute sql 16 times.
I found example in "Application Developer's Guide - Large Objects" in page "Data Interface for Persistent LOBs 13-17", there is a example function called "array_insert". It shows the usage of OCIBindArrayOfStruct, but can only insert LOB with same size, the LOB field of each row filled with the same size data.
But I have to insert LOB with different size, for example 8K for row 1, and 16K for row 2, 128K for row 3. Than I find the alenp parameter of OCIBindByName/OCIBindByPos. It is "pointer to array of actual lengths of array elements."(OCI document). So I think I find the solution for my problem. But the type of alenp parameter is ub2*, is it means I can only insert 64K data for each row in my array insert? It is too small, I hope I can array insert BLOB with 16M each row.
Or there is any other solution for my problem? I look forward to it for a long time! thanks every one!It is called Data Interface to work with LOB datatypes by APIs designed for use with legacy datatypes. I can specify SQLT_BIN to bind memory binary data to BLOB column, and INSERT or UPDATE directly. It can be without LOB locator and save round-trip to the server. This is very fit my needs, because I have to insert very much BLOBs to server as soon as possible.
I have make a test program, and multi-row with different size blob( less than 65536 bytes) can be insert at one time, without locators. Multi-row wiht same size blob( more than 64K) also can be insert at one time--the alenp parameter is not used. I only can not insert multi-row with different size blob( more than 64k) because the type of alenp is ub2*.
thank you for your reply! -
Call library function node with array of clusters using array data pointer
Hello all.
I am writing a LabVIEW wrapper for an existing DLL function.
The function has, as one of its parameters, an array of structs. The struct is very simple, containing two integers. I am using the call library function node to access it.
In Labview I created an array of clusters, where the cluster has two 32-bit integers as its members. So far, so good.
Now I have to pass this in to the Call Library Function Node. Here I am running into trouble.
I have used The topic in LAVA and The topic in the knowledge base as my primary sources of information, though I have read a bunch of forum topics on the subject too.
I do understand that I could write a new function which takes as a parameter a struct with the size as the first member and an array as the second, and I might just do this and have it call the regular function, but I was hoping to do it more simply.
According to the C file which LabVIEW generates for me from the CLFN when I choose "Adapt to Type" and "Array Data Pointer", the prototype it is expecting is:
int32_t myFunc(uint32_t handle, uint16_t channel,
int32_t FIFOnumber, void data[], int32_t numWords, int32_t *actualLoaded,
int32_t *actualStartIndex);
And the prototype of the function in my DLL is
int borland_dll myFunc(DWORD handle, usint channel,
int FIFOnumber, struct mStruct *data, int numWords, int *actualLoaded, int *actualStartIndex);
This looks like a match to me, but it doesn't work (I get garbage in data). From the topic in LAVA referenced above, I understood that it would work. It does not.
If I cast data to the pointer-to-pointer I get when I generate c code by wiring my struct to a CIN and generating, then I seem to get what I expect. But this seems to work when I choose "pointers to handles" too, and I would expect array data pointer to give a different result.
Is there any way to get this to work directly, or will I have to create a wrapper? (I am currently using LabVIEW 2011, but we have customers using 2009 and 2012, if not other versions as well).
Thank you.
Batya
Solved!
Go to Solution.OK, here is more detailed information.
I have attached the VI.
This is the code from the "C" file created by right-clicking the CLN and creating a "C" file.
When the parameter in the CLN is set to "array data pointer":
/* Call Library source file */
#include "extcode.h"
int32_t Load_Transmit_FIFO_RTx(uint32_t handle, uint16_t channel,
int32_t FIFOnumber, void data[], int32_t numWords, int32_t *actualLoaded,
int32_t *actualStartIndex);
int32_t Load_Transmit_FIFO_RTx(uint32_t handle, uint16_t channel,
int32_t FIFOnumber, void data[], int32_t numWords, int32_t *actualLoaded,
int32_t *actualStartIndex)
/* Insert code here */
When the parameter is "pointers to handles":
/* Call Library source file */
#include "extcode.h"
/* lv_prolog.h and lv_epilog.h set up the correct alignment for LabVIEW data. */
#include "lv_prolog.h"
/* Typedefs */
typedef struct {
int32_t control;
int32_t data;
} TD2;
typedef struct {
int32_t dimSize;
TD2 data[1];
} TD1;
typedef TD1 **TD1Hdl;
#include "lv_epilog.h"
int32_t Load_Transmit_FIFO_RTx(uint32_t handle, uint16_t channel,
int32_t FIFOnumber, TD1Hdl *data, int32_t numWords, int32_t *actualLoaded,
int32_t *actualStartIndex);
int32_t Load_Transmit_FIFO_RTx(uint32_t handle, uint16_t channel,
int32_t FIFOnumber, TD1Hdl *data, int32_t numWords, int32_t *actualLoaded,
int32_t *actualStartIndex)
/* Insert code here */
When the parameter is set to "handles by value":
/* Call Library source file */
#include "extcode.h"
/* lv_prolog.h and lv_epilog.h set up the correct alignment for LabVIEW data. */
#include "lv_prolog.h"
/* Typedefs */
typedef struct {
int32_t control;
int32_t data;
} TD2;
typedef struct {
int32_t dimSize;
TD2 data[1];
} TD1;
typedef TD1 **TD1Hdl;
#include "lv_epilog.h"
int32_t Load_Transmit_FIFO_RTx(uint32_t handle, uint16_t channel,
int32_t FIFOnumber, TD1Hdl *data, int32_t numWords, int32_t *actualLoaded,
int32_t *actualStartIndex);
int32_t Load_Transmit_FIFO_RTx(uint32_t handle, uint16_t channel,
int32_t FIFOnumber, TD1Hdl *data, int32_t numWords, int32_t *actualLoaded,
int32_t *actualStartIndex)
/* Insert code here */
As to the DLL function, it is a bit more complicated than I explained above, in the current case. My VI calls the function by this name in one DLL, and that DLL loads a DLL and calls a function (with the same name) in the second DLL, which does the work. (Thanks Rolfk, for helping me with that one some time back!)
Here is the code in the first ("dispatcher") DLL:
int borland_dll Load_Transmit_FIFO_RTx(DWORD handle, usint channel, int FIFOnumber, struct FIFO_DATA_CONTROL *data, int numWords, int *actualLoaded, int *actualStartIndex)
t_DispatchTable *pDispatchTable = (t_DispatchTable *) handle;
int retStat = 0;
retStat = mCheckDispatchTable(pDispatchTable);
if (retStat < 0)
return retStat;
if (pDispatchTable->pLoad_Transmit_FIFO_RTx == NULL)
return edispatchercantfindfunction;
return pDispatchTable->pLoad_Transmit_FIFO_RTx(pDispatchTable->handlertx, channel, FIFOnumber, data, numWords, actualLoaded, actualStartIndex);
borland_dll is just "__declspec(dllexport)"
The current code in the DLL that does the work is:
// TEMP
typedef struct {
int control;
int data;
} TD2;
typedef struct {
int dimSize;
TD2 data[1];
} TD1;
typedef TD1 **TD1Hdl;
// END TEMP
int borland_dll Load_Transmit_FIFO_RTx(int handlertx, usint channel, int FIFOnumber, struct FIFO_DATA_CONTROL *data, int numWords, int *actualLoaded, int *actualStartIndex){
struct TRANSMIT_FIFO *ptxFIFO; //pointer to transmit FIFO structure
usint *pFIFOlist; //pointer to array of FIFO pointers to FIFO structures
int FIFOentry, numLoaded;
usint *lclData;
usint nextEntryToTransmit;
// TEMP
FILE *pFile;
int i;
TD1** ppTD = (TD1**) data;
TD1 *pTD = *ppTD;
pFile = fopen("LoadFIFOLog.txt", "w");
fprintf(pFile, "Starting Load FIFO with %d data words, data pointer 0x%x, with the following data: \n", numWords, data);
for (i = 0; i < numWords; i++) {
fprintf(pFile, "%d: control--0x%x, data--0x%x \n", i, data[i].control, data[i].data);
fflush(pFile);
fprintf(pFile, "OK, using CIN generated structures: dimSize %d, with the following data: \n", pTD->dimSize);
for (i = 0; i < numWords; i++) {
fprintf(pFile, "%d: control--0x%x, data--0x%x \n", i, pTD->data[i].control, pTD->data[i].data);
fflush(pFile);
// END TEMP
if ((handlertx) <0 || (handlertx >= NUMCARDS)) return ebadhandle;
if (cardrtx[handlertx].allocated != 1) return ebadhandle;
pFIFOlist = (usint *) (cardrtx[handlertx].segaddr + cardrtx[handlertx].glob->dpchn[channel].tr_stk_ptr);
pFIFOlist += FIFOnumber;
ptxFIFO = (struct TRANSMIT_FIFO *)(cardrtx[handlertx].segaddr + *pFIFOlist);
//use local copy of ptxFIFO->nextEntryToTransmit to simplify algorithm
nextEntryToTransmit = ptxFIFO->nextEntryToTransmit;
//on entering this routine nextEntryToLoad is set to the entry following the last entry loaded
//this is what we need to load now unless it's at the end of the FIFO in which case we need to wrap around
if ( ptxFIFO->nextEntryToLoad >= ptxFIFO->numEntries)
*actualStartIndex = 0;
else
*actualStartIndex = ptxFIFO->nextEntryToLoad;
//if nextEntryToLoad points to the last entry in the FIFO and nextEntryToTransmit points to the first, the FIFO is full
//also if nextEntryToLoad == nextEntryToTransmit the FIFO is full and we exit without loading anything
if (( (( ptxFIFO->nextEntryToLoad >= ptxFIFO->numEntries) && (nextEntryToTransmit == 0)) ||
( ptxFIFO->nextEntryToLoad == nextEntryToTransmit)) && (ptxFIFO->nextEntryToLoad != INITIAL_ENTRY)){
*actualLoaded = 0; //FIFO is full already, we can't add anything
return 0; //this is not a failure, we just have nothing to do, this is indicated in actualLoaded
numLoaded = 0;
lclData = (usint *)data; //must use 16 bit writes to the module
//conditions are dealt with inside the for loop rather than in the for statement itself
for (FIFOentry = *actualStartIndex; ; FIFOentry++) {
//if we reached the end of the FIFO
//if the module is about to transmit the first element of the FIFO, the FIFO is full and we're done
//OR if the module is about to transmit the element we're about to fill in, we're done - the
//exception is if this is the first element we're filling in which means the FIFO is empty
if ((( FIFOentry >= ptxFIFO->numEntries) && (nextEntryToTransmit == 0)) ||
((FIFOentry == nextEntryToTransmit) && (FIFOentry != *actualStartIndex) )){
*actualLoaded = numLoaded;
//set nextEntryToLoad to the end of the FIFO, we'll set it to the beginning next time
//this allows us to distinguish between full and empty: nextEntryToLoad == nextEntryToTransmit means empty
ptxFIFO->nextEntryToLoad = FIFOentry;
return 0;
//we reached the end but can continue loading from the top of the FIFO
if ( FIFOentry >= ptxFIFO->numEntries)
FIFOentry = 0;
//load the control word
ptxFIFO->FifoData[FIFOentry * 3] = *lclData++;
//skip the high of the control word, the module only has a 16 bit field for control
lclData++;
//now put in the data
ptxFIFO->FifoData[(FIFOentry * 3) + 2] = *lclData++;
ptxFIFO->FifoData[(FIFOentry * 3) + 1] = *lclData++;
numLoaded++;
//we're done because we loaded everything the user asked for
if (numLoaded >= numWords) {
*actualLoaded = numLoaded;
ptxFIFO->nextEntryToLoad = FIFOentry+1;
return 0;
//if we reached here, we're done because the FIFO is full
*actualLoaded = numLoaded;
ptxFIFO->nextEntryToLoad = FIFOentry;
fclose (pFile);
return 0;
As you can see, I added a temporary diagnostic with the structures that were created in the "Handles by value" case, and print out the data. I see what is expected, whichever of the options I pick in the CLN!
I understood (from the information in the two links I mentioned in my original post, and from the name of the option itself) that "array data pointer" should pass the array of data itself, without the dimSize field. But that does not seem to be what is happening.
Batya
Attachments:
ExcM4k Load Transmit FIFO.vi 15 KB -
Hello, I'm studying for the certification exam, and I got this question:
Given a properly prepared String array containing five elements, which range of results could a proper invocation of Arrays.binarysearch() produce?
A. 0 through 4
B. 0 through 5
C. - 1 through 4
D. -1 through 5
E. - 5 through 4
F. -5 through 5
G. -6 through 4
H. - 6 through 5
They say the correct answer is 'G' but for me is 'E', because if the maximum number to insert an element is at position 4 then the insertion point would be at -5, so the range would be -5 through 4. Am I wrong?
Thank you.Elsymenab wrote:
They say the correct answer is 'G' but for me is 'E', because if the maximum number to insert an element is at position 4 then the insertion point would be at -5, so the range would be -5 through 4. Am I wrong?
...Yes, you are wrong.
String[] array = {"A","B","C","D","E"};
System.out.println(Arrays.binarySearch(array, "F")); // prints -6
System.out.println(Arrays.binarySearch(array, "E")); // prints 4 -
Array Insert/Update/Select in JDBC
I've been using array processing in ODBC, OCI, and Pro*C for years and desperately need to do so in JDBC. I've thus far been unsuccessful and am beginning to doubt that it's supported which to me is unfathomable. I've likewise found many like inquiries on the net - none of which were addressed. There have been many respondants who don't undertstand what array processing is and mistake it for batch SQL statements. They are not the same. Batched SQL statements are seperate statements which are executed in a single call to the database engine. What I'm taking about is using a prepared statement and binding primitive arrays to the statement. A single statement is executed and the contents of the arrays passed to the database. I've conducted tests years ago and array insert/update is many times faster than batch statements. Does anyone know whether or not JDBC supports array processing? If anyone's interested, I can provide snippets via email which illustrate how this is done in ODBC and other API's.
Thanks.You referred me to
http://java.sun.com/products/jdbc/download.html. The
only reference I found to arrays were SQL Arrays - not
what I'm talking about. See prior C/ODBC snippet. Do
you know how to do this in JDBC?You are talking about passing an array as a single parameter to and from the underlying database correct? (And that has nothing to do with batch processing.)
If so in section 16.4 "Array Object"..... looking at that section gives the following reference....
The Array object returned to an application by the ResultSet.getArray and
CallableStatement.getArray methods is a logical pointer to the SQL ARRAY
value in the database; it does not contain the contents of the SQL ARRAY value.
The above has nothing to do with batch processing (although presumably one could use it in a batch process but then one can use String as well.)
Of course perhaps there is something in there that says that only applies to batch processing. If so could you please point out the section and quote the text. -
Find text from current insertion point - indesign cs3 javascript
Hi all,
I need to find the text from the insertion point in CS3 document through javascipt. Built in indesign has this feature. I want to do this in my script.
Anybody have the idea/solutions for ths...
Thanks,
VaasuThanks csm_phil for your interest... see my below code:
if(app.documents.length>0)
myDoc=app.activeDocument;
var myFoundchar=new Array();
app.findTextPreferences = NothingEnum.nothing;
app.changeTextPreferences = NothingEnum.nothing;
app.findGrepPreferences= NothingEnum.nothing;
app.findGrepPreferences.fontStyle="Italic"
app.findGrepPreferences.findWhat ="[\\l\\u].+?( v\. ).+" //"(.+?(v\.).+)";
var myResults = myDoc.findGrep();
for (var i = 0; i < myResults.length; i++)
alert(myResults[i].contents);
app.findGrepPreferences= NothingEnum.nothing;
app.findGrepPreferences.findWhat =", \\d{1,}.+?\\d{4}?\\) ";
var mySearch = myDoc.findGrep();
app.select(mySearch[0].insertionPoints[0]);
alert(mySearch[0].contents);
app.findGrepPreferences = null;
alert("Done");
here i am trying the fetch the Table of cases, example find results are
Sears, Roebuck & Co. v. Camp, 124 N.J. Eq. 403, 407 (E. & A. 1938)
Sears, Roebuck & Co. v. Camp, 124 N.J. Eq. 403, 408 (E. & A. 1938)
Gramatan Nat’l Bank & Trust Co. v. Backman, 30 N.J. Super. 349 (App. Div. 1954)
So, the 2nd search mysearch always giving first line output above. , 124 N.J. Eq. 403, 407 (E. & A. 1938)
If i use the mySearch[i].contents sometimes it doesn't give the correct result. Since, if gives if other than the case name ends with , and digits. It makes the result totally wrong.
Thanks,
vaasu -
[CS3] [JS] add XML Element to Insertion Points
hi list,
i'll do some text parsing in indesign cs3 intended to add some xml elements to my document.
i just wonder why i can't markup an insertion point. is the following approach correct? The code works fine, only the return value (stored in the _xml variable) is not the new element but the parent element. The same code works without using the insertion point (marking up the text object [xmlElements.add(_dokument.xmlTags.item("index") , erg[0]))] ).
Any ideas or thoughts?
var _dokument = app.activeDocument;
main ();
// ** main ()
function main() {
//Set the find options.
app.findGrepPreferences = NothingEnum.nothing;
app.changeGrepPreferences= NothingEnum.nothing;
//find any string encloased by @
app.findGrepPreferences.findWhat = "@.*?@";
erg = _dokument.findGrep();
while (erg.length > 0) {
_xml = _dokument.xmlElements[0].xmlElements.item("text").xmlElements.add(_dokument.xmlTags.item( "index") , erg[0].insertionPoints[0]);
erg[0].contents = "";
erg = _dokument.findGrep();hi dave,
gui testing is always a good idea :-) but in this case the behaviour is different:
your observation is correct (anyway at least a strange behaviour compared to any xml editing tool i know == how adobe intended to insert an empty element?), tagging in the gui a tagged insertion point tags the whole story.
in the script a new element is added but the return value is the parent element (the xmlElement of the whole story).
this causes a problem when i add an attribute (the intention of the above script is to add references) which is added to the parent element.
gregor -
[AS] How to make cross reference at insertion point
Hi,
I have a book ("indb") including several documents with several "anchors"
(german translation: "Textanker") where cross references from different documents are linked to.
What I already got is to reference all anchors and collect them in a list.
Now I would like to make a new cross reference at the insertion point
in a text frame of the active document - can't get it to run :-(
Is anybody out there who can post a AS-sample doing this?
Thanks in advance!
Here is the reference to an already existing anchor:
{hyperlink text destination id 44155 of document "kapitel 2.indd" of application "Adobe InDesign CS4"}
The code I tried to make a new cross reference looks like this - but of course doesn't work:
tell application "Adobe InDesign CS4"
tell active document
make new hyperlink with properties {name:"new hyperlink", destination:hyperlink text destination id 44155 of document "kapitel 2.indd"}
end tell
end tellThanks a lot - got it now!
Maybe it could be helpful for others to look at your answer
with the placeholders replaced by "real" strings as it was hard for me
to figure out the right form:
tell document 1
set theDest to make hyperlink text destination with properties {name:"Some name", destination text:<a reference to the relevant text>}
this line for example looks like this =>
set theDest to make hyperlink text destination with properties {name:"Some name", destination text:insertion point 902 of story id 44083 of document "kapitel 3.indd" of application "Adobe InDesign CS4"}
set theSource to make cross reference source with properties {name:"Some name",source text:< reference to the relevant text>}
this line for example looks like this =>
set theSource to make cross reference source with properties {name:"Some name", source text:cursorPosition, applied format:cross reference format id 44305 of document "kapitel 1.indd" of application "Adobe InDesign CS4"}
where "cursorPosition" was defined before by
set cursorPosition to object reference of selection
(the cross reference source needs the applied format reference too)
make hyperlink with properties {source:theSource, destination:theDest, visible:true, highlight:invert, width:thick, border color:dark green, border style:dashed, name:"Whatever" }
this line for example looks like this =>
make hyperlink with properties {source:theSource, destination:hyperlink text destination id 44184 of document "kapitel 3.indd" of application "Adobe InDesign CS4", border color:black, highlight:none, border style:solid, hidden:false, visible:true, width:thin}
end tell -
How to locate the first insertion point on every page?
I need to paste some same anchored objects on every page for exporting RTF format.
So I need to locate the first insertion point on every page.
Then, I use the code below (make a simple example):
for(i = 0; i < app.documents[0].pages.length; i ++){
app.select(app.documents[0].pages[i].textFrames[0].insertionPoints[0])
app.paste()
But when a file has a very long table spread over several pages, the location operation will select the insertion point before the table --- the starting point of the table.
For instance, a table start on page 3 and end on page 10
app.documents[0].pages[4~10].textFrames[0].insertionPoints[0]) can't select the first insertion point from page 4 to page 10. (In terms of scripting, the insertion point exists before the very long table starting on page 3.)
How can I solve the problem? Thanks in advance.I dont know exactly what you are trying to do but you can try this. If you have table which runs trough multiple pages, you can first divede this tabel, that cells on separate pages would represent stand alone table. Than you can fit textframe to this table. When addressing indention poin you will get right position.
In your case when table start at 3rd and ends on 10th page you would get 8 tables in 8 textframes on its own page. If textframes are linked and table is smaller than textframe you will have problem when addressing first insertion point on 4th or any other page. That why you should fit textframe to table:
var bl=app.activeDocument.pages[1].textFrames[0].insertionPoints[0].baseline
var tf=app.activeDocument.pages[1].textFrames[0];
var gb=[tf.geometricBounds[0],tf.geometricBounds[1],bl,tf.geometricBounds[3]];
tf.geometricBounds=gb;
Now when you set
app.activeDocument.pages[1].textFrames[0].insertionPoints[0] you will get position before table or
app.activeDocument.pages[1].textFrames[0].insertionPoints[-1] you will get position after table -
HI All
I need to get a hold of an insertion point between 2 characters and add some negative kerning to the characters either side.
I have tried:
myInsertion = myPara.characters[-3].insertionPoints;
and many variations of that line, but with no joy.
Can someone please help me out here?
Cheers (as always)
RoyThis will set the kerning on each side of that character to a specific value:
myPara.characters[-3].insertionPoints.everyItem().kerningValue = -25;
If you want to use different values, then:
myPara.characters[-3].insertionPoints[0].kerningValue = leftKern;
myPara.characters[-3].insertionPoints[1].kerningValue = rightKern;
where leftKern and rightKern hold the values you want.
Dave -
The ABAP/4 Open SQL array insert results in duplicate database records
Hi,
Iam getting following error :
The ABAP/4 Open SQL array insert results in duplicate database records.
Error in ABAP application program.
The current ABAP program "SAPLV60U" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
" Information on where terminated
The termination occurred in the ABAP program "SAPLV60U" in "VBUK_BEARBEITEN".
The main program was "SAPMSSY4 ".
The termination occurred in line 503 of the source code of the (Include)
program "LV60UF0V"
of the source code of program "LV60UF0V" (when calling the editor 5030).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "VBUK_BEARBEITEN" "(FORM)" but was not handled locally, not declared
in the
RAISING clause of the procedure.
The procedure is in the program "SAPLV60U ". Its source code starts in line 469
of the (Include) program "LV60UF0V "."
Please assist how to proceed further ..
Many thanks
Mujeeb.Sorry, THe correct note is 402221.
Description from the note
<< Please do not post SAP notes - they are copyrighed material >>
Edited by: Rob Burbank on Feb 22, 2009 3:46 PM -
ABAP/4 Open SQL array insert results in duplicate databaserecordsfor pk13
Hi Experts, when I am working with pk13n tranaction iam getting an error message stating that update was terminated by user. when i am checking with st22 it gives the following message. please give the solution , iam sending the code as well.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "SAVE_DATA" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.) please find the below code please give the solution for this error message.
1 *eject
2 *----
3 * Verbuchen der Daten *
4 *----
5 FORM SAVE_DATA.
6
7 DATA: lf_menge LIKE ekpo-menge VALUE 0, "717464
8 lf_netwr LIKE ekpo-netwr VALUE 0.
9
10 * Einteilungen löschen --> Array Delete aus Tabelle DEKET
11 DESCRIBE TABLE DEKET LINES SY-TFILL.
12 IF SY-TFILL GT 0.
13 DELETE EKET FROM TABLE DEKET.
14 IF SY-SUBRC NE 0.
15 MESSAGE A865.
16 ENDIF.
17 EKET_DELETE = EKET_DELETE + SY-DBCNT.
18 REFRESH: DEKET.
19 CLEAR : DEKET.
20 ENDIF.
21
22 * Einteilungen hinzufügen --> Array Insert aus Tabelle IEKET
23 DESCRIBE TABLE IEKET LINES SY-TFILL.
24 IF SY-TFILL GT 0.
>> INSERT EKET FROM TABLE IEKET.
26 IF SY-SUBRC NE 0.
27 MESSAGE A864.
28 ENDIF.
29 EKET_INSERT = EKET_INSERT + SY-DBCNT.
30 REFRESH: IEKET.
31 CLEAR : IEKET.
32 ENDIF.
33
34 * Check whether the qty in EKPO-MENGE is correct: note 717464
35 SELECT SUM( menge ) FROM eket INTO lf_menge
36 WHERE ebeln = ekpo-ebeln
37 AND ebelp = ekpo-ebelp.
38 IF sy-subrc = 0 AND ekpo-menge <> lf_menge.
39 IF ekpo-ktmng <> 0.
40 refe1 = ekpo-zwert * lf_menge / ekpo-ktmng.
41 ELSE.
42 refe1 = ekpo-zwert * lf_menge / 1000.
43 ENDIF.
44 IF refe1 > maxwert.Hi,
Well I don't know why you have duplicates, this is a functionnal issue. But you get the dump due the the message number 864 that triggers the abend... Changing the message type to 'E', 'S' or 'I' will prevent the dump but I guess this message has a good reason to be
Kr,
Manu. -
The ABAP/4 Open SQL array insert results in duplicate Record in database
Hi All,
I am trying to transfer 4 plants from R/3 to APO. The IM contains only these 4 plants. However a queue gets generated in APO saying 'The ABAP/4 Open SQL array insert results in duplicate record in database'. I checked for table /SAPAPO/LOC, /SAPAPO/LOCMAP & /SAPAPO/LOCT for duplicate entry but the entry is not found.
Can anybody guide me how to resolve this issue?
Thanks in advance
Sandeep PatilHi Sandeep,
Now try to delete ur location before activating the IM again.
Use the program /SAPAPO/DELETE_LOCATIONS to delete locations.
Note :
1. Set the deletion flag (in /SAPAPO/LOC : Location -> Deletion Flag)
2. Remove all the dependencies (like transportation lane, Model ........ )
Check now and let me know.
Regards,
Siva.
null -
As described above.
I have spent far too much time investigating this issue! All I would like to do is have the insertion point cursor (the 'I' shaped text thing) not dissapear when navigating text in a word document with the arrow keys.
Some forums say it's an apllication issue, i.e. microsoft, others say you used to be able to do it in older versions of mac os'.
This isn't a problem for Mac programmes. Obviously it is an issue when Microsoft programmes cross over to Mac. If the computer was a PC then I could customise the blinking rate, turn it on or off etc under the control panel options. With a Mac running MS Office I have not got this option.
So how do I go about telling Apple of my displeasure? So hopefully for future editions of OS or Office for Mac this very minor but completely infuriating problem gets ironed out?
Cheers xThank you Ralph n Kurt, very quick off the mark boys, well done
Just checking in to inform you that today, after putting up with the issue for over a year, it has sorted itself out, MIRACLE! I don't know how but I've got a fully trackable insertion point when I navigate with my arrow keys!!
Do you think it's the big-wigs (because I complained to both Mac n MS) tweaking my computer behind the secenes? and if so which one would've done it? My money's on the geniusii.
Either way I am well chuffed and thanks again!
x
Maybe you are looking for
-
Can I use a iTunes card to pay owed money from a prepaid card?
I had a prepaid card with 10 dollars in it, and I used it to buy stuff on itunes store. but when I tried to install something, it said I had to pay them my owed money. can I use a itunes card to pay for the money I owe them?
-
Got an error while import script run in command prompt in R12
hi ' i am running the below script in command prompt in R12, but it will give an error that error name: 'import' is not recognized as internal or external command, operable program or batch file. import C:\JDeveloper10g\jdevhome\jdev\myprojects\flsm\
-
Inbound idoc status 53 but nothing is updated in transaction level
Hi All I am using we19 test tool to process routing idoc LOIROU02 (inbound processing)with some test values. After executing using standard inbound function module in R/3 4.7, I am getting a status 53 ( application document posted). This idoc is used
-
Voice mail will open in Outlook 2010. The form region "UmOutllokAddinRA" cannot be opened.
I'm running Exchange Server 2007, Outlook 2010 and Lync 2010. Unified Messaging is enabled. When a voice mail is left, the voice mail is delivered to my Inbox, but the message will not open. I get the error "The form region "UmOutllokAddinRA" cannot
-
We are running 11.1.1.4. Are there any recommendations for speeding up a dataexport of a BSO (Planning) cube? We are fixing on a specific member (or the level 0 children of that member) for each dimension. Thanks. Terri T.