AS2 Adapter changing SSL Cert

Guys do you know how to use the AS2 Adapter ?. Our Customer is complaining that Invoices sent to them are now being rejected due to signing problem.
The Receiver Agreement has Security Settings for AS2 Sender Signing Key TRUSTED\ mycompanykeys \ mycompanykey
and AS2 Receiver Encrypt and Auth certicate TRUSTED\ mycompanykeys \ customercert
But if I have a new certificate were and how do I physically put this on the server ?

Hi,
As rightly stated it is an issue with the certificates.
To uplaod the certificates is the responsibilty of the BASIS team.However if you are suppose to do the settings than this is the procedure.
First thing you need to check is whether the SSL service is active. This youo can check in transaction SMICM>Goto> service.
Incase if you do not see the SSL service here then you need to active the service.
Please refer to the following procedure to activate the service.
http://help.sap.com/saphelp_nwpi71/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
Once this is done there are certain adapter specific settings, for this please refer to the following link.
http://help.sap.com/saphelp_nwpi71/helpdata/en/f5/799add57aeee4f889265094a04695c/frameset.htm
After finishing the above two procedures the certificates will be successfully uploaded in the system.(AS2 requires two kinds of certificate i.e.e SSL for encryping serving information i.e. host, port etc and second is the AS2 certificates to encypt the actual payload)
Once the AS2 certificates of the sender are uplaoded in the XI server then the name of this certificate is to be given in the Key trusted that you have mentioned.
regards,
Milan Thaker.

Similar Messages

Changing SSL Cert, how do you update the trust profile for devices.

I am in the process of changing out the ssl cert for the trust profile (going from a self-signed to a signed cert). How do you update the trust profile on the devices already paired with the server.

Yes, the linked smart object can be either raster or vector, but they will be placed as raster images, just as the embedded SO are. SO can be embedded or linked to an outside file. Edits to the original will not update in the original until you select "Update modified content from the menu" when you reopen the file that has the place SO in it. otherwise it will update when you save the linked file. Yes, there still is an advantage to having an embedded SO. You may not want to maintain the links - send a file off and forget to include the linked files. You may want to alter the SO, but not the original file.
Ah, thanks. But does this mean that raster and vector smart objects can EITHER be located within the Photoshop file (as they have been since their advent) OR linked to an external file?
And if so,
1. Can this linked file be either raster or vector?
2. Do edits to it automatically update the Photoshop file?
3. Is ther any longer any advantage to having the smart object data stored within the Photoshop file when it can be linked?

Changing SSL Cert of GroupWise Administration Console

Hello Novell-forum,
is there any posibility to change the ssl-certificate of groupwise 2014's administration console?
I searched in documentation and internet but can't find anything about that.
Michael

As far as i can see and test on Groupwise 2014 14.0.1 HP1, if you want to replace the self signed certifcate for the admin console, juste save and replace the file:
/opt/novell/groupwise/certificates/<longhash>/admin.<domain>.crt with the wilcard certificate for your site.
Francois
Originally Posted by mblackham
It may be on the radar for future releases. It is not scheduled for the next release however..
--Morris
>>> sulatna<[email protected]> 11/19/2014 3:06 AM >>>
Thank you for your answers.
laurabuckley
No - thats unfortunately not the correct option I searched for.
mblackham
I think you understood what I want to do. (use official wildcart
certificate for admin-console)
Will this be possible in any future version of GroupWise? Perhaps like
it is done great in filr-appliance?
Michael
sulatna
sulatna's Profile: https://forums.novell.com/member.php?userid=2662
View this thread: https://forums.novell.com/showthread.php?t=480489

Client Auth and SSL with Seeburger AS2 adapter

Hello All,
We are using the Seeburger AS2 adapter in our landscape and I am in the process of setting the same up and have made quite some progress in all my issues.
and I hope that you will be able to help me out.
1. Server SSL on Receiver AS2 adapter
I am sending a message from XI using the Receiver AS2 adapter to my AS2 test tool using Server SSL.
This is working perfectly fine. In my AS2 adapter I have selected HTTPS as the protocol and the message goes via SSL to the target test tool, is processed and the MDN comes back to XI perfectly.
The issue here is :
Irrespective of what is provided in the Server Certificate ( Keystore) , the message goes to my target test tool. I even left this field blank with no certificate entry and still the SSL connection was established and the message went to the target system.
Is there no validation that XI does here? I am lost what is the use of this entry Server Certificate if XI blindly accepts all SSL connections.
I am using a Decentral Adapter Engine with LoadBalancer.
2. Client Auth on Receiver AS2 Adapter
I tried to perform Client Authentication by proving my Server's private key in the AS2 adapter. The corresponding public key is loaded in my partner's Keystore.
XI error's with the error "SSL handshake failed - Bad Certificate" .
I am not sure why XI is erroring out here and I have a feeling that I have misunderstood the use of the fields in the AS2 adapter,
Server Certificate ( Keystore) and Private Key for Client Authentication.
Has anyone tried this? If further details are needed, I will be able to furnish the same.
Regards,
Bhavesh

Hello Jens,
Thanks for your reply.
1. The Encryption and Signature part of the Interface is working absolutely fine and I use the same concept highlighted by you - The Sender always signs the message with his private key and encrypts with message with the partner's public key in the corresponding agreement.
2. Server SSL is also working perfectly fine, i.e, when XI initiates the connection the SSL connection is established to the partner.
3. Mutual Auth was the issue where I was getting the bad certificate issue.
To investigate further I moved the same setup to my Central Adapter Engine and all the issues I had described above seem to have vanished and things work exactly as I was expecting, ie.
The field : Server Certificate (Keystore) is used to provide the Target System's Server SSL's public Certificate.
The field : Private Key for Client Authentication is used where XI provides its own Server SSL's private key for Mutual / Client Authentication.
The problem seems to be with my Decentral Adapter engine and not my central adapter engine and so I guess,
1. I either have the incorrect certificates on my Decentral Adapter Engine.
2. I also have 2 instances of a Decentral Adapter Engine with a Webdispatcher and so maybe the 2 Visual Admin's of the 2 Decentral AE are inconsistent.
3. Maybe it was just a long day and I did something wrong
Will investigate further for the root cause but I am glad that my concepts remain intact and things do work as I expected them to work.
A blog on all this is on the cards sometime soon.
Cheers,
Bhavesh

SSL Cert Renewal w/Org Name Change

Hello,
We get our SSL certs from a central agency that deals with Verisign. The central agency changed their name, which changes the Organization Name on the cert. That prevents the cert from being imported by the server. On the advice of a Windows admin, I tried to fake it by creating a new site on that server, importing the new cert (all good), but then the new server won't start.
Is there a better way to get the new-org-named cert accepted by the original site?
Steve Kayner

Are you talking about changing your SMTP domain name? Or you want to change AD DS domain name? If you want to change/add SMTP domain that you Exchange is using, just add accepted domain that you wish to use.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

How to validate SSL cert on ASA5510, before changing DNS?

I have recently installed an SSL certificate from a third party CA (GoDaddy) into an ASA5510 that I will be using as a VPN appliance for AnyConnect clients.
The ASA is going to replace our VPN server, which currently has the vpn.domain.com FDQN assigned to its IP address in public DNS.
Is there a way for me to properly valiadate that the SSL cert will work without any issues (i.e. no invalid error messages popping up on users' AnyConnect clients) from the Internet, before I cut over public DNS to point to the public facing interface on the ASA5510 which is where vpn.company.com will ultimately be pointing to?

Put vpn.domain.com in your local PC hosts file with the new IP. Then try Anyconnect.

AS2 Receiver CC SSL Details

Hi,
My scenario is idoc to EDI Invoice scenario, but we are using HTTPS protocol in receiver (AS2) adapter.
When we select the HTTPS protocol it is asking below SSL Certificates
1. Server Certificate (key Store)
2. Private key for client Authentication
These two certificates are same like what we are giving in the agreements or different?
If different which certificate details we need to give here.
Thanks
Ramesh

Hi Suresh,
According to your answer HTTPS certificate is different than normal one (what we are giving in the agreements)
What about the "Private key for client Authentication", which details i need to give here?
we gave the same certificate paths in AS2 CC, now we are getting the below error. Could you please suggest what is the issue
"Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found # , SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found # "
Thanks
Ramesh

Error in Sender AS2 adapter

Hi Expert,
I have configured sender AS2 adapter as per the sap guide. and share our url and AS2 name.Now when the partner is trying to send the file from their side they are gettting the following error message and in SAP PO we have not received any file via AS2 sender adapter.
We have checked the fire walls and its working fine.
2014.04.09
01:15:03:128 0326030999 PHDR OK HTTP Response-Line = (HTTP/1.1 302 Found)
2014.04.09 01:15:03:128
0326030999 PHDR ERR Trading Partner rejected the transaction
2014.04.09 01:15:03:128 0326030999 HPOS ERR Requested synchronous receipt not
returned
2014.04.09 01:15:03:128 0326030999 HPOS ERR One or more errors occurred with
this transaction. m_nErr=(2103)
Regards
Kasturika

Hi Harish,
I have change the as2 url from http://<host>:<port>/AS2 to http://<host>:<port>/AS2/B2B and now are partner is facing differnt error
2014.04.22
03:06:04:400 0637647174 PHDR OK HTTP Response-Line = (HTTP/1.1 401
Unauthorized)
2014.04.22 03:06:04:400 0637647174 PHDR ERR Trading
Partner rejected the transaction
I had checked with my partner to use the http authentication and share our user id and password. but they said that they are not using http authentication.
we also shared our public key certificate and import theirs in our nwa- certificates and keys .
Please share if anything more i need to configure.

Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!!

Hi AS2 experts,
*When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
1. I used the following parameters in AS2 Module.
ModuleName                                                       Module Key
localejbs/Seeburger/solution/as2                              solutionid
localejbs/ModuleProcessorExitBean                          exit
ModuleKey    ParameterName         ParameterValue
exit                JNDIName     deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Iam getting the following error.
Success     MP: Processing local module localejbs/Seeburger/solution/as2
Error :   MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
Error : Exception caught by adapter framework: Object not found in lookup of as2.
Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
It is showing the below error like AS2ID is missing.. but its there in party configuration.
Error :
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Can anyone has idea what might be wrong.
Kindly suggest me asap.
Thank You.
Regards
Seema.

Hi,
Plesae go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
and
Check with below configuration
Configuration for AS2 or simple file adapter.
We are using this module configuration for converting EDI D96A format to XML:
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic logAttID ConverterLog
bic mappingName See_E2X_ORDERS_UN_D96A
bic saveSourceMsg ORIGINAL_EDI
can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
basically,I need mapping name for this.
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
File receiver:
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
Thanks
Swarup

AS2 Adapter issues

Hi,
I have a scenario (Proxy to AS2).
Receiver channel is configured to HTTPS.
It passes successfully through MONI, but gives error in Receiver adapter.
Exact error is :
"Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake # , SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake # "
Any help on this ?
Thanks,
Vikas

Looks like the other side is not configured for SSL. First check the address and port number you send the message to. If that turns out to be fine, verify that the java unlimited encryption has been deployed on your PI system (note the the default java encryption on a PI system is not the correct one!)

FTP/File Sender Adapter over SSL - 500 Illegal PORT command.

Hello Experts!
I'm trying to configure FTP Sender Adapter over SSL. This is the configuration I'm using:
Server: server01
Port: 21
Data Connection: Active
Timeout: 100
Connection Security: FTPS (FTP Using SSL/TLS) for Control and Data Connection
Command Order: AUTH TLS, USER, PASS, PBSZ, PROT
I have imported ftp server certificate into TrustedCAs key store. When the sender adapter tries to connect it receives the error 500 Illegal PORT command when getting files list.
This is an excerpt of the logs of connection steps:
#Plain##ftp server returns reply '220 Restricted Access. All Actions are monitored.'#
#Plain##Detected 'AUTH TLS' command: Preparing TLS/SSL connection upgrade#
#Plain##'AUTH TLS' successful: Upgrading control channel to TLS/SSL#
#Plain##ftp server returns reply '234 Proceed with negotiation.'#
#Plain##ftp server returns reply '331 Please specify the password.'#
#Plain##ftp server returns reply '230 Login successful.'#
#Plain##ftp server returns reply '200 PBSZ set to 0.'#
#Plain##ftp server returns reply '200 PROT now Private.'#
#Plain##ftp server returns reply '215 UNIX Type: L8'#
#Plain##ftp server returns reply '200 Switching to ASCII mode.'#
#Plain##ftp server returns reply '250 Directory successfully changed.'#
#Plain##ftp server returns reply '500 Illegal PORT command.'#
Does anybody know how to solve it?
Thank you in advance!
Roger Allué i Vall

Ok! This is the maximum i could obtain:
Fri Dec 11 15:28:12 2009 [pid 15206] FTP response: Client "10.58.42.108", "220 Restricted Access. All Actions are monitored."
Fri Dec 11 15:28:12 2009 [pid 15206] FTP command: Client "10.58.42.108", "AUTH TLS"
Fri Dec 11 15:28:12 2009 [pid 15206] FTP response: Client "10.58.42.108", "234 Proceed with negotiation."
Fri Dec 11 15:28:12 2009 [pid 15206] FTP command: Client "10.58.42.108", "USER iubsint"
Fri Dec 11 15:28:12 2009 [pid 15206] [iubsint] FTP response: Client "10.58.42.108", "331 Please specify the password."
Fri Dec 11 15:28:12 2009 [pid 15206] [iubsint] FTP command: Client "10.58.42.108", "PASS <password>"
Fri Dec 11 15:28:12 2009 [pid 15205] [iubsint] OK LOGIN: Client "10.58.42.108"
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP response: Client "10.58.42.108", "230 Login successful."
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP command: Client "10.58.42.108", "PBSZ 0"
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP response: Client "10.58.42.108", "200 PBSZ set to 0."
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP command: Client "10.58.42.108", "PROT P"
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP response: Client "10.58.42.108", "200 PROT now Private."
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP command: Client "10.58.42.108", "SYST"
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP response: Client "10.58.42.108", "215 UNIX Type: L8"
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP command: Client "10.58.42.108", "TYPE I"
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP response: Client "10.58.42.108", "200 Switching to Binary mode."
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP command: Client "10.58.42.108", "CWD /interfaces"
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP response: Client "10.58.42.108", "250 Directory successfully changed."
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP command: Client "10.58.42.108", "PORT 10,58,45,108,159,112"
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP response: Client "10.58.42.108", "500 Illegal PORT command."
I think we found the problem though. FTP Administrator says this is wrong:
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP command: Client "10.58.42.108", "PORT 10,58,45,108,159,112"
it should be
Fri Dec 11 15:28:12 2009 [pid 15207] [iubsint] FTP command: Client "10.58.42.108", "PORT 10,58,42,108,159,112"
Something is making SAP PI to take a wrong ip address (This server has two).
I'll let you know if we solve it!!
Thank you!!!

How to deal Inhouse files using Seeburger AS2 adapter...!!!

Hi all,
Has anyone managed to configure the Seeburger AS2 adapter for XI successfully to process multiple inbound message types.
We have an issue here with inbound messages being received by the AS2 adapter. We currently have it configured for inbound deliveries(Which deals with EDI files) which is working fine. The issue is that we would now like to send other messages as well. It seems the AS2 adapter only looks at the sender/receiver party combination to determine the correct sender agreement, but does not look at the message type which is a limitation. I have heard mention of a splitter module which can be used to distinguish between different messages and pass them to the correct sender agreement for processing, information on this is thin on the ground to non existent.
I have few custom Inhouse files where i need to recieve through AS2 adapter.
I need to differentiate the messages hitting to my communication channel.
ex:
1st message will be having
HDR PICKS
2nd message will be having
HDR PURCH
so based on the second field which has "PICKS" or "PURCH" , i need to pass the message to run the corresponding map.
How i need to configure to acheive these kind of custom Inhouse files through AS2 adapter??
Do i need to use splitter for these as well?? If yes how i need to use?
Is there any setting we can make at Sender AS2 adapter to differentiate each message??
Waiting for the answers.
Kindly reply if anyone knows.
Thanks&Regards
Seema.

Hi,
i have setup a scenario with edifact (different message types) using as2.
first i had to create a mapping using bic.
edifact_xxxx
in: edifact_service
out: functional acknowledgement.
in the mapping code i adjusted the called mapping, standard it will use see* changed it to e2x* (custom mapping)
in your case using flatfiles maybe you should take a look at the VDA structure, these files are also defined under inhouse.
when you define a input file adapter are you getting a classifier message?
like
<classifier><type>Edifact</type><classifierMappingID>XXXX</classifierMappingID><encoding>US-ASCII</encoding><additionalIdentifier></additionalIdentifier></classifier>

Seeburger AS2 Adapter

Hi,
I need few information how to implement seeburger adapter(Using AS2 or FTP) with XI. I have a requirement to convert the EDI Ansi X12 messages from a EDI system and post it into a R/3 system using XI.
The client system(EDI system) is in US has VAN and we have the R/3 in India. So do we need to establish a VAN connectivity or it can directly access the client VAN to take the EDI messages.
Do clarify whether to go for AS2 or FTP, and what are the advantages of each.
I went thro few documents from Seeburger which comes up with the package of Generic FTP adapters or we have a Standalone AS/2, or BIS:HUB and spoke.
Regards,
Nithiyanandam

HI,
Brief about the FTP/VAN adapter:
The SEEBURGER FTP/VAN Adapter is responsible for transmitting files according to the File Transfer Protocol, with the particular support of various VANs. This protocol was installed as a user gateway protocol by several of the largest VAN providers, such as IBM, GE and Sterling IIB and Sterling Commerce.
The FTP/VAN adapter must be configured in the configuration part of the Integration Builder. The adapter is based on the Adapter Framework and is executed by the SAP J2EE Adapter Engine as shown in the diagram below.
The FTP/VAN Adapter supports the following protocols:
IBMIE VAN, all report options.
GEIS (GeMarkIII) and GeMark3000, all report options, report file is only extracted, if needed.
EXITE (ECODEX), EDIFACT file processing, DISPATCHED reports.
Sterling Commerce and Sterling IIB.
MCI EDI*Net.
The following FTP options are supported:
SSL, both IMPLICIT and AUTH_TLS support, server authentication.
All popular FTP proxy types like: USERWL, USERWOL, SITEWL, OPENWOL.
Active and Passive connection modes.
"KeepAlive" feature.
Binary, ASCII and custom transfer types.
Refer the below thresd which taks about the AS2 adapter configuration inroder to convert the EDI to XML message the similar configuration needs to be done in case of VAN/FTP adapter.
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Seeburger adapters like FTP,OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Seeburger provides the std mapping program which has to be deploy on to XI and we need to give it to module tab in adapter which does the conversion.
Here are the some of the std mapping program which is provided by seeburger.
See_E2X_INVOIC_UN_D96A
See_E2X_INVOIC_UN_D99A
See_E2X_ORDERS_UN_D96A
See_E2X_OSTRPT_EAN_D96A.
We need to take the license from seeburger and we need to deploye the seeburger adapters then only we can see in adapter list on XI.
Thanks and Regards,
Chirag Gohil

Seeburger AS2 Adapter - Cookie Control

Hello together,
on my current project I am facing this kind of problem during AS2 communication:
Our partner provides us a cookie containing a session ID. Using this cookie we are able to send messages to our partner. This cookie has no expiration date, because we should be able to send messages for an unknown amount of time, and if it had an expiration date, some messages would fail for no logical reason.
On the partner side, though, the sessionIDs are invalidated after 600 seconds of inactivity. This is done for security reasons, as it is considered that after this amount of inactivity, the connection must end.
When we tried to connect after 10 minutes, using this cookie with the old sessionID, the response is an invalid SessionID or session expired.
Our partner suggested to delete the cookie after sending messages. But on the AS2 adapter configuration I see no option for cookie control.
Any ideas? Keep in mind that our partner would rarely change its setup.
With kind regards
Frank Opitz

Am not sure but do AS2 adapters have a Cookie Option? Or are you talking about Http Keep Alive option?
Can you try to disable this option in the Receiver As2 adapter and give it a shot?
Regards
Bhavesh

AS2 adapter-- Module tab configuration to call seeburger std mappings..!

Hi Experts,
Seeburger has been installed and i want to use AS2 adapter to make use the seeburger standard mappings.
When i opened the module tab, its been found that for
Sender AS2 adapter:
Module Name                                     Module Key
localejbs/Seeburger/solution/as2             solutionid
localejbs/CallSapAdapter                         exit
Module configuration
_Modulekey      ParameterName               ParameterValue_
Solutionid           Mappingname               SEE_ORDERS_UN_...
can i use the above steps??
Is solutionid is enough to call the seeburger mapping?
or
do i need to use the Bic module to call the seeburger std mapping like below?
Module Name                                    Module Key
localjbs/CallBicXIRaBean                         bic
Module configuration
Modulekey     ParameterName               Parameter Value
Bic               Mappingname              SEE_ORDERS_UN_...
Kindly let me know.
Regards
Krupa.

HI,
For module configuration for As2 refer the below help.
Sender configuration:
AS2 identifier is the party identified which will be provided by the WAN network provider.
Under the party identifiere tab
Agency will be seeburger
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Refer the below thread which has the same discussion.
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Thanks and Regrds,
Chirag

AS2 Adapter changing SSL Cert

Similar Messages

Maybe you are looking for